The check that pkgver is non-empty done in check_pkgver should also be
performed after running the pkgver() function. Merge validate_pkgver
into check_pkgver and run check_pkgver after updating pkgver.
Signed-off-by: Allan McRae <allan@archlinux.org>
Currently makepkg clears the whole $pkgbasedir which is needless. Moreover,
in the obscure case of multiple makepkg runs (with different $pkgname) that
share a $pkgdirbase, only $pkgdir's from the last run will remain. Since
I consider the contents of $pkgdir an important artifact, this commit restricts
the deletion to individual $pkgdir's.
When CLEANUP is set, the behavior is unchanged.
Discussed in:
https://lists.archlinux.org/pipermail/pacman-dev/2015-February/019939.html
Signed-off-by: Allan McRae <allan@archlinux.org>
Especially when maintaining local templates in addition to the ones
stored in /usr/share/makepkg-template, it can be useful to include
templates stored in multiple different locations into one PKGBUILD. This
patch makes this possible by allowing --template-dir to be specified
multiple times.
This also introduces a dedicated error message when a template cannot be
found, in contrast to the already existing "Couldn't detect version for
template '%s'".
If a template of the same name is present in more than one of the given
directories, the last one always takes precedence.
Neither the default behaviour without the option given, nor the handling
of a single template dir is changed.
Signed-off-by: Dominik Fischer <d.f.fischer@web.de>
Signed-off-by: Florian Pritz <bluewind@xinu.at>
Signed-off-by: Allan McRae <allan@archlinux.org>
makepkg --packagelist prints the name of each package that would
normally be produced, minus $PKGEXT, and exits.
Implements FS#42150
Signed-off-by: Ivy Foster <joyfulgirl@archlinux.us>
Signed-off-by: Allan McRae <allan@archlinux.org>
Both the "db" and "files" databases are created in one call to repo-add.
Only the "foo.db.tar.xz" name is passed to repo-add.
Signed-off-by: Allan McRae <allan@archlinux.org>
The information needed to create a delta entry and remove the old package from
the filesystem are the same.
Signed-off-by: Allan McRae <allan@archlinux.org>
The check for xdelta3 was done as needed (and not in all cases). Do this
check early so that repo-add does not abort part way through.
Signed-off-by: Allan McRae <allan@archlinux.org>
It is not hard to think of situations where the repo database should not
be updated unless the whole operation succeeds. Error out before a partial
database update occurs.
Signed-off-by: Allan McRae <allan@archlinux.org>
We use the get_pkg_arch function with the package name parameter in two places:
1) checking if the package is already built
2) installing build packages
Currently this failed when a package override for "arch" was an array, despite
all our documentation stating that it is indeed an array. This change makes
these two places fail if there is package override for arch that is not an
array - i.e. of the form arch='i686'.
Signed-off-by: Ivy Foster <joyfulgirl@archlinux.us>
Signed-off-by: Allan McRae <allan@archlinux.org>
Hi. This change allows makepkg to UPX-compress executables on Windows, but will probably affect some Linux packages as well (I'm guessing gdbserver, wine, mingw-w64).
Signed-off-by: Allan McRae <allan@archlinux.org>
There was some manual check to know if the local repository was really a clone
of the one specified in PKGBUILD. This check has been removed because it is
buggy and not necessary.
It is buggy because this check needs to be semantic, not a simple string
comparison. For example, I was blocked from building a PKGBUILD because Bazaar
was returning two different strings for the same location (for HTTP one was
url-encoded while the other was not, and for local paths one was absolute while
the other was relative). While this may be a bug in Bazaar, the check is
unreliable since the comparison is not semantic (http://foo.com/%2Bplus and
http://foo.com/+plus obviously refer to the same location for example).
Specially, it is useless because the intention is updating the existing local
clone. However, if the local clone is not a real clone of the repository
specified in PKGBUILD (which was what this buggy check tried to tell), next step
which is a pull operation will fail anyway. This is because bzr pull does not
perform merges, it just makes one branch into a mirror of another.
There was a reason provided when this manual check was added for Git, but no
reason provided for copying such check when Bazaar support was added, see
commits below. In fact, Mercurial lacks such manual check.
* c926c39b04
* 3b02f80dcb
Fixes FS#43448.
Signed-off-by: Allan McRae <allan@archlinux.org>
To add a new package check, drop a file in libmakepkg/lint and add the
function to the "lint_functions" array.
Signed-off-by: Allan McRae <allan@archlinux.org>
To add a new packaging option, drop a file into libmakepkg/tidy that contains
a 'packaging_options+=('<option>') and a function that implements that
option. The function needs added to the 'tidy_remove' array if it removes
files or the 'tidy_modify' array otherwise.
Signed-off-by: Allan McRae <allan@archlinux.org>
Move the PGP key checking into the check_gpg function. This also results in
error messages being in colour.
Signed-off-by: Allan McRae <allan@archlinux.org>
The -R/--remove option left the old package in place when delta packages
were to be generated. It was also removed before we ensure the generation
of the entry for the new package was generated without error.
Remove the old package at the end of database entry and delta generation. Also
improve the help message to clarify it is the old package that is removed.
Signed-off-by: Allan McRae <allan@archlinux.org>
This performs all the needed work for libmakepkg to be included in
tarballs, installed into the correct place, and read into makepkg.
Also change the install root for libmakepkg to an architecture independant
location.
Signed-off-by: Allan McRae <allan@archlinux.org>
This can decrease package size by optimizing PNG image size. Images are
just stored with better compression and/or filter options. The actual
image content is not altered.
Additionally this can automatically fix broken PNG images which caused
some trouble lately.
Signed-off-by: Christian Hesse <mail@eworm.de>
Signed-off-by: Allan McRae <allan@archlinux.org>
Commit 9e5e86aa was supposed to fix this. Instead I picked another [[ -f ]]
statement in the same region and added the hardlink test to it instead, thus
not fixing the bug.
Signed-off-by: Allan McRae <allan@archlinux.org>
This fixes the issue where if the user explicitly set the name of the cloned source
to eg. foo.git, the directory name in $SRCDEST would be foo.git as expected, but the
clone in $srcdir would be stripped of the .git suffix.
Signed-off-by: Lukáš Jirkovský <l.jirkovsky@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
If an already used array is passed array_build, some entries from the old
array could be carried over if the old array was longer than the new one.
Clear the destination array before adding elements to it to prevent this
issue.
Fixes: https://bugs.archlinux.org/task/43387
Signed-off-by: Allan McRae <allan@archlinux.org>
die prints "at $scriptname line $linenumber." if the string does not
end with "\n". This information is not of much use for us and it makes
testing harder because we'd to remove it there.
Signed-off-by: Florian Pritz <bluewind@xinu.at>
I suspect this is just wrong -- you never need to quote the replacement
side of a PE. In bash 4.3, this is essentially a no-op, but because of
a bug in bash 4.2, we get embedded quotes as a result of this
replacement. The relevant changelog item in bash is:
Fixed a bug that caused single quotes that resulted from $'...' quoting
in the replacement portion of a double-quoted ${word/pat/rep} expansion
to be treated as quote characters.
But this doesn't apply to us. Let's just drop the excessive quoting...
Signed-off-by: Allan McRae <allan@archlinux.org>
When a shared library uses an absolute symlink for its its .so file, the check
if the shared version of a static library exists fails. Test for the presence
of a broken symlink too.
Signed-off-by: Allan McRae <allan@archlinux.org>
This bombs out when "$trusted" expands to the empty string. We're
better off passing the var by name and letting bash default to "0" when
the var is empty
Fixes: https://bugs.archlinux.org/task/43269
Signed-off-by: Allan McRae <allan@archlinux.org>
I don't see an easy fix to avoid printing this more than once, so let's
at least differentiate the messaging so that it's more clear what's
going on.
Signed-off-by: Allan McRae <allan@archlinux.org>
We fixed this up to check architecture specific sources in ec679e09b2,
but fudged the array name in the in_array call.
Signed-off-by: Allan McRae <allan@archlinux.org>
Previously, we used a single boolean value to determine correlation of
sources to checksums. Since the introduction of arch-specific sources,
this is no longer sufficient, as we must ensure that we have checksums
for (potentially) multiple source arrays.
This change inlines the logic of have_sources to build an associative
array of source array names, unsetting them as we discover their
checksums. The error condition then becomes a non-empty correlation
array.
Fixes: https://bugs.archlinux.org/task/43192
Signed-off-by: Allan McRae <allan@archlinux.org>
This prevents the database from becoming inaccessible for non-root
users when the script was executed with a umask of 027.
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Signed-off-by: Allan McRae <allan@archlinux.org>
We validated all sources when making a source package, whether or not they
are included in the tarball.
Signed-off-by: Allan McRae <allan@archlinux.org>
People have mentioned that the silent upgrade to DB version 9 when no
adjustments are needed for directory symlinks is confusion. Always print
the upgrading message.
Signed-off-by: Allan McRae <allan@archlinux.org>
I'm pretty sure this is some kind of left over stuff that was supposed
to print the filename, linenumber and line content. This is already
done so just remove it.
Signed-off-by: Florian Pritz <bluewind@xinu.at>
Signed-off-by: Allan McRae <allan@archlinux.org>
Before this, we'd see bizzare behavior of:
-> Adding changelog file (systemd.install)...
And, changelog files in the global section would not be added at all.
The code is clearly wrong here, as it references 'install' within a
loop of 'changelog' and 'install'. Let's use parameter indirection to
ensure that the proper file is identified and added.
Signed-off-by: Allan McRae <allan@archlinux.org>
File in noextract should still be symlinked into $srcdir so that they
can be accessed without using $SRCDEST. Using noextract on VCS files
makes no sense as these are not being extracted, so now this does
nothing.
Signed-off-by: Allan McRae <allan@archlinux.org>
This matches the behaviour with non-VCS sources. It also allows incremental
builds when subversion is used to obtain sources.
Signed-off-by: Lukáš Jirkovský <l.jirkovsky@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
bzr does not recognize bare ssh:// urls.
Fixes FS#41811
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
The local changes are discarded when updating. This matches the behaviour
when non-VCS sources are used. It also allows incremental builds.
This also changes the checkout during bzr source "extraction" to a heavyweight
checkout so that pulling a specific revision does not alter the original
download.
Original-work-by: Lukáš Jirkovský <l.jirkovsky@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
The local changes are discarded when updating. This matches the behaviour
when non-VCS sources are used. It also allows incremental builds.
Signed-off-by: Lukáš Jirkovský <l.jirkovsky@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Previously the sources were dowloaded in HEAD revision in the download_svn().
If a specific revision was requested in fragment, the code was updated to that
revision in extract_svn(). However, because SVN is a centralized system,
this means that the changed sources has to be downloaded again.
By moving the fragment handling to download_svn(), we get the correct revision
without having to download it later in extract_svn().
Signed-off-by: Lukáš Jirkovský <l.jirkovsky@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
The local changes are discarded when updating. This matches the behaviour
when non-VCS sources are used. It also allows incremental builds.
Signed-off-by: Lukáš Jirkovský <l.jirkovsky@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Similar to .PKGINFO, .SRCINFO provides structured metadata from the
PKGBUILD to be included with source packages.
The format is structured such that it contains a "pkgbase" and one to
many "pkgname" sections. Each "pkgname" section represents an "output
package", and inherits all of the attributes of the "pkgbase" section,
and then can define their own additive fields.
For example, a simple PKGBUILD:
pkgbase=ponies
pkgname=('applejack' 'pinkiepie')
pkgver=1.2.3
pkgrel=1
arch=('x86_64' 'i686')
depends=('friendship' 'magic')
build() { ...; }
package_applejack() {
provides=('courage')
...;
}
package_pinkiepie() {
provides=('laughter')
...;
}
Would yield the following .SRCINFO file:
pkgbase = ponies
pkgdesc = friendship is magic
pkgver = 1.2.3
pkgrel = 1
arch = x86_64
arch = i686
depends = friendship
depends = magic
pkgname = applejack
provides = courage
pkgname = pinkiepie
provides = laughter
The code to generate this new file is taken a project which I've been
incubating[0] under the guise of 'mkaurball', which creates .AURINFO
files for the AUR. AURINFO is the exactly same file as .SRCINFO, but
named as such to make it clear that this is specific to the AUR.
Because we're parsing shell in the packaging functions rather than
executing it, there *are* some limitations, but these only really crop
up in more "exotic" PKGBUILDs. Smoketesting[1] for accuracy in the Arch
repos yields 100% accuracy for [core] and [extra]. [community] clocks in
at ~98% accuracy (.3% difference per PKGBUILD), largely due to silly
haskell packages calling pacman from inside the PKGBUILD to determine
dependencies. [multilib] currently shows about 92% accuracy -- a
statistic which can be largely improved by utilizing the recently merged
arch-specific attribute work. This is also a smaller repo so the numbers
are somewhat inflated. In reality, this is only a .8% variance per
PKGBUILD.
Together, we can make PKGBUILD better.
[0] https://github.com/falconindy/pkgbuild-introspection
[1] https://github.com/falconindy/pkgbuild-introspection/blob/master/test/smoketest
Signed-off-by: Allan McRae <allan@archlinux.org>
We can avoid setting a default value for epoch since we intend to mean
unset and "0" as the same thing. This is also a more consistent default
as the display of epoch=0 is no epoch at all in the full package
version.
The extra paranoia in get_full_version can be removed due to lint_epoch
guarding against non-integer values of epoch.
Signed-off-by: Allan McRae <allan@archlinux.org>
This bug isn't currently exposed by any of the existing codepaths, but
an upcoming patch to introduce SRCINFO files to makepkg will expose
this.
Signed-off-by: Allan McRae <allan@archlinux.org>
This regression snuck in during some reviewing of 963f7fe02f
(arch-specific sources). We must always check the source=() array for
sources.
Signed-off-by: Allan McRae <allan@archlinux.org>
Interesting attributes created with 'local' or 'declare' won't be
surfaced in .PKGINFO, so we shouldn't try to look for them.
Signed-off-by: Allan McRae <allan@archlinux.org>
Rather than implementing suffix matching, which might clash, let's just
print the full fingerprint of the err'ing key so that the user can
copy/paste it into validpgpkeys. Also, make it clear in the manpage
that validpgpkeys needs full fingerprints, and nothing else.
Signed-off-by: Allan McRae <allan@archlinux.org>
grep'ing out blank lines and sorting output thoroughly breaks any file
lists with %BACKUP% entries which must be separated from the file list
by a blank line. Adds a custom function to ensure that all paths
printed are non-empty and unique.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
I found this feature confusing, and the documentation wasn't any help.
It was pointed out to me on IRC that validpgpkeys expects full
fingerprints, and won't accept shorter forms. This makes the
documentation insufficient, and the variable name itself misleading.
This patch bolsters the documentation to explain more about what the
contents should be, and implements suffix matching to allow matching on
shorters fingerprint suffices. Now, when makepkg tells you that a key
ID isn't valid, it's sufficient to manually check the key ID against
the known good ID, and add it as is to validpgpkeys.
Signed-off-by: Allan McRae <allan@archlinux.org>
This commit changes the few remaining instances of:
[[ ! $foo = "$bar" ]]
to the more common:
[[ $foo != "$bar" ]]
Signed-off-by: Allan McRae <allan@archlinux.org>
