Lower water table where base humidity is low.
Alter heat and humidity to compensate for river humidity and altitude
chill.
Correct misuse of surface_max_y in generateTerrain.
Remove sand trails in the water at river mouths.
Remove river water below water_level.
Correct heat/humidity calculations where noises are less than zero.
Correct heightmap errors as much as possible.
Make humidity calculations more readable.
In the calculation of y_start,
when 'column height max' was large it caused
nmin.Y + max_height > nmax.Y - max_height
Now, in this situation y_start is set to the
midpoint between nmin.Y and nmax.Y
Limit y0 and y1 to between nmin.Y and nmax.Y,
otherwise index calculation, which has no checks for limits,
places them at unwanted locations in the voxelmanip
As stated in this forum thread [1], I noticed that there is a
2 second interval in which inventory changes are shown on the
client. @yyt16384 found the source of these 2 seconds:
m_nothing_to_send_pause_timer is set to 2.0 every time there
are no changes to make, but this timer is not reset when
SetBlockNotSent or setBlocksNotSent are invoked. So in worst
case, the changed block will be sent over 2 seconds too late.
With this change, changed inventories are updated almost
immediately, but it causes additional connection load.
This allows mods to perform both asynchronous and synchronous HTTP
requests. Mods are only granted access to HTTP APIs if either mod
security is disabled or if they are whitelisted in any of the
the secure.http_mods and secure.trusted_mods settings.
Adds httpfetch_caller_alloc_secure to generate random, non-predictable
caller IDs so that lua mods cannot spy on each others HTTP queries.
Previously you could steal a secure environment from a trusted mod by wrapping
request_insecure_environment with some code like this:
local rie_cp = minetest.request_insecure_environment
local stolen_ie
function minetest.request_insecure_environment()
local ie = rie_cp()
stolen_ie = stolen_ie or ie
return ie
end
'cam_pos_nodes -/+ box_nodes_d' can exceed the range of v3s16
when a player is near the world edge using a large view range
This previously caused world to disappear
Create new function getBlocksInViewRange() called from
updateDrawList() and renderMap()
Correct code style throughout updateDrawList() and renderMap()
Commit
6a1670dbc3 "Migrate to STL containers/algorithms."
has replaced core::map<T, bool> with std::set<T>, but didn't update
the accompanying comment saying "value is dummy". This happened at
two places.
Introduce a new contentfeatures version (8). When clients
connect using v27 protocol version, they can assume that
the tiledef.backface_culling is trustable, but if clients
connect to servers providing contentfeatures version 7,
then the v27 clients know that backface culling settings
provided by the server in tiledefs are bogus for mesh,
plantlike, firelike or liquid drawtype nodes.
thanks to hmmmm, est31, nerzhul.
Tested on new client - new server, new client - old server
old client - new server.
All places that lock this mutex are only called by the main thread:
ClientMap::updateCamera(), ClientMap::updateDrawList(), ClientMap::renderMap(), ClientMap::renderPostFx().
To avoid spawn search failing in new specialised mapgens
Increase spawn search range to 4000 nodes
Add getSpawnLevelAtPoint() functions to EmergeManager, class Mapgen
and all mapgens
Remove getGroundLevelAtPoint() functions from all mapgens except mgv6
(possibly to be re-added later in the correct form to return actual
ground level)
Make mgvalleys flag names consistent with other mapgens
Remove now unused 'vertical spawn range' setting
Tunnel 3D noises are only calculated when solid terrain is present
in mapchunk, avoiding large amounts of unnecessary calculations
Change 'int' to 's16' in calculateNoise
Change 'i' to 'vi' for voxelmanip indexes for consistency
Keep 'u32 index3d' local to a smaller part of tunnel code
Mgv7: Don't call CaveV7 if no solid terrain in mapchunk
Give 'open' bool a more descriptive name
Replace simple caves with V5 caves, adding unpredictable water and lava
settings and massive caves based on subterrain. Remove fast terrain mode
and accompanying settings. Remove superfluous temperature/humidity
settings. Remove lava/water height setting. Fix errors in humidity
handling and remove humidity_break_point setting. Move cave noises to
generateCaves. Fix minor formatting/naming issues and use
MYMAX/MYMIN/myround.
clock_gettime() is a far better clock than gettimeofday().
Even better than clock_gettime() is that you can select either
CLOCK_MONOTONIC, or even CLOCK_MONOTONIC_RAW. These clocks offer
high precision time. And the _RAW variant will never roll back
due to NTP drift or daylight savings, or otherwise.
I've adjusted this code to select the right clock method auto-
matically based on what's available in the OS. This means that
if you're running a very old linux version, MacOS or other,
you will automatically get the best clocksource available.
I've tested all Linux clocksources by selectively compiling and
running a 10k+ timer test suite. In all cases I confirmed that
the 3 POSIX Linux clocksources worked properly, and were
selected properly.
I've modified the OS X compile path to use the high-res clock
source for all time functions, but I can't confirm it works or
that it compiles.
As for WIN32, I confirmed that the used clocksource is indeed
a Monotonic clocksource, so good news: that code section appears
to be exactly what it should be.
`errorstream` must not be overly verbose as clientside it is directly printed
onto the ingame chat window. These days, the serverlist can contain > 200k bytes,
so better print it to warningstream if the data buffer is too long.
Outdated servers are always sending tiledefs with culling
enabled no matter what, as the value was previously entirely
ignored.
To compensate, we must (1) detect that we're running against
an old server with a new client, and (2) disable culling for
mesh, plantlike, firelike and liquid draw types no matter what
the server is telling us.
In order to achieve this, we need to bump the protocol version
since we cannot rely on the tiledef version, and test for it
being older. I've bumped the protocol version, although that
should have likely happened in the actual change that introduced
the new backface_culling PR #3578. Fortunately that's only 2
commits back at this point.
We also explicitly test for the drawtype to assure we are not
changing the culling value for other nodes, where it should
remain enabled.
This was tested against various pub servers, including 0.4.13 and
0.4.12.
Fixes#3598
Backface culling is enabled by default for all tiles, as this
is how the lua parser initializes each tiledef. We revert to
always using the value from the tiledef since it is always
read and serialized.
Mods that wish to enable culling for e.g. mesh nodes, now can
specify the following to enable backface culling:
tiles = {{ name = "tex.png", backface_culling = true }},
Note the double '{' and use of 'name' key here! In the same
fashion, backface_culling can be disabled for any node now.
I've tested this against the new door models and this properly
allows me to disable culling per node. I've also tested this
against my crops mod which uses mesh nodes where culling needs
to be disabled, and tested also with plantlike drawtype nodes
where we want this to continue to be disabled.
No default setting has changed. The defaults are just migrated
from nodedef.cpp to c_content.cpp.
cloneMesh() has to use a switch in order to create a different
mesh buffer type depending on vertex type. (Credit: the new cloneMesh
was written by RealBadAngel.)
To avoid repetitive code, all other methods use getVertexPitchFromType()
to automatically adapt the indexing to the vertex type at runtime.
The pageflip mode requires a stereo quadbuffer, and a modern graphic
card. Patch tested with NVidia 3D Vision.
The mini-map is not drawn, but that's what is done for topbottom and
sidebyside modes as well.
Also most of the time the user would prefer the HUD to be off. That's
for the user to decide though, and toggle it manually.
Finally, the interocular distance (aka eye separation) is twice as much
as the "3d_paralax_strength" settings. I find this a strange design
decision. I didn't want to chance this though, since it's how the other
3d modes interpret this settings.
Previously, we assumed that reply->str was NULL
terminated. However, this turned out to be not true,
as users reported crashes in strlen connected to
where reply->str was appended to an std::string.
Use the method recomended by the docs, to read the
length separately.
Removing the target file on other platforms was enabled likely unintentionally
by commit 5f1f1151d3.
This may be the reason why there has been corruption of files on Linux on hard
shutdowns.
Previously I described the problem and this fix in issue #3084.
My commit
e2d54c9f92 "shutdown when requested from lua in singleplayer too"
broke minetest's feature to connect to servers. The client crashed
after the connection init was complete.
Thanks to @sofar for reporting the bug.
Fixes#3498.
If an `XDG_CACHE_HOME` can't be found or `RUN_IN_PLACE` is enabled,
`path_cache` is left at its default of `$PATH_USER/cache`
(at a time when `PATH_USER` is `..`), rather than being reset to
`$PATH_USER/cache` after `PATH_USER` has been properly set.
This allows other applications (e.g. minetestmapper) to interrogate
the database while minetest is running, without causing an almost
certain minetest crash.
This reverts commit f14e7bac54.
Reverted due to missinterpretation of agreement, obvious dislike and me not interested in doing fights for feature I don't actually need
This reverts commit 91bafceee6.
Reverted due to missinterpretation of agreement, obvious dislike and me not interested in doing fights for feature I don't actually need
Previous commit
70ea5d552e "Add support for limiting rotation of automatic face movement dir entitys"
by sapier has broken minetest's feature to open worlds. This was due to a
missing stack pop operation.
Thanks to @oleastre for reporting this bug and suggesting the fix.
3D Mandelbrot/Mandelbar
3D Christmas Tree
3D Mandelbulb
3D Cosine Mandelbulb
4D Mandelbulb
Plus corresponding julia set for each
Add credits for formulas
Rename parameter 'formula' to 'fractal'
Speed optimisations
* Horizontal and vertical are used wrongly. Use height and width because
horizontal/vertical describes different things. Thanks @kilbith for pointing out.
* Update minetest.conf.example and settings_translation_file.cpp
* Correct maximum/minimum copy paste mistake.
Fix the type of the threshold value for mapgen.
The commit
a78dd7f2b6 "Fix spelling of noise_threshold"
has changed it to be read as int, but it can have non-integral values too.
Thanks to @kwolekr for pointing this out.
To terminate unwanted shadows from floatlands or realms above
Also add to LuaVoxelManip calc_lighting for use in mapgen mods
Remove the 2 argument calcLighting, mapgens now use the 5
argument form to specify the volumes for propagateSunlight and
spreadLight
In mgsinglenode replace calcLighting with setLighting and
clean-up use of tabs and spaces
On openSUSE luajit is not detected correctly.
This is because openSUSE is using a lua version suffix, like other Linux distributions do it also.
So the include directory is:
include/luajit-5_1-2.0
A segfault exposed a missing 'vm->m_area.contains()'
check in makeCorridor that allowed the calculation
of vm index for a node outside the vm area. The huge
and invalid index number caused getContent to fail
Fixes bug for which commit
6c37e89f08 "Fix old client showing duplicated health bar on new server"
by @sapier
laid the groundwork, where the server has
updated its copy of the hud flags without
respecting the mask.
Fixes#3395.
Flag is set by default in MapgenParams
The global 'trees' flag remains but is now
undocumented and unset by default in MapgenParams
Add mgv6_spflag 'trees' set by default in
defaultsettings.cpp to affect new worlds only
This is automatically backwards
compatible for existing worlds
* Remove trailing lines from src/sound_openal.cpp
* Don't do a horribly ugly copy of the file's path, allocating and deallocating a
10 kb buffer in the process. This copy was needed for backwards compatibility
with libvorbis 1.3.1 and earlier, as the removed comment explains.
However, even Ubuntu precise has 1.3.2 already. Dropping support and sparing
the ugly copy can therefore be considered safe.
* Actually load sounds from the memory, not caching them at the disk first,
removing the old hack. This is the main motivation for the commit.
Fix regression of commit
5e507c9829 "Add server side ncurses terminal"
which allowed all players, even those without a shout priv, to chat.
Fixes#3362.
Fix regression of commit
5e507c9829 "Add server side ncurses terminal"
where no line termination character was printed after a
lua print outside of terminal mode.
Fixes#3350.
This adds a chat console the server owner can use for administration
or to talk with players.
It runs in its own thread, which makes the user interface immune to
the server's lag, behaving just like a client, except timeout.
As it uses the same console code as the f10 console, things like nick
completion or a scroll buffer basically come for free.
The terminal itself is written in a general way so that adding a
client version later on is just about implementing an interface.
Fatal errors are printed after the console exists and the ncurses
terminal buffer gets cleaned up with endwin(), so that the error still
remains visible.
The server owner can chose their username their entered text will
have in chat and where players can send PMs to.
Once the username is secured with a password to prevent anybody to
take over the server, the owner can execute admin tasks over the
console.
This change includes a contribution by @kahrl who has improved ncurses
library detection.
The Atomic implementation was only partially correct, and was very complex.
Use locks for sake of simplicity, following KISS principle.
Only remaining atomic operation use is time of day speed, because that
really is only read + written.
Also fixes a bug with m_time_conversion_skew only being decremented, never
incremented (Regresion from previous commit).
atomic.h changes:
* Add GenericAtomic<T> class for non-integral types like floats.
* Remove some last remainders from atomic.h of the volatile use.
It isn't possible to use atomic operations for floats, so don't use them there.
Having a lock is good out of other reasons too, because this way the float time
and the integer time both match, and can't get different values in a race,
e.g. when two setTimeofDay() get executed simultaneously.
Cleanup:
* Remove volatile keyword, it is of no use at all. [1]
* Remove the enable_if stuff. It had no use either.
The most likely explanation why the enable_if stuff was there is that it
was used as something like a STATIC_ASSERT to verify that sizeof(T) is not larger
than sizeof(void *). This check however is not just misplaced in a place where we
already use a lock, it isn't needed at all, as gcc will just generate a call to
to the runtime if it compiles for platforms that don't support atomic instructions.
The runtime will then most likely use locks.
Code style fixes:
* Prefix name of the mutex
* Line everything up nicely, where it makes things look nice
* Filling \ continuations with spaces is code style rule
Added operations on the atomic var:
* Compare and swap
* Swap
The second point of the cleanup also fixes the Android build of the next commit.
[1]: http://stackoverflow.com/q/2484980
On Windows Release x64 bit build this changes:
ProfilerGraph::put
1.68% -> 0.061%
ProfilerGraph::draw
12% -> 17.%
So yes, there is a tradeoff between saving profiling data
(executed always) and drawing the profiler graph (executed very rarely).
But usually you don't have the profiler graph open.
For several years now, the lua script lock has been completely broken.
This commit fixes the main issue (creation of a temporary rather than
scoped object), and fixes a subsequent deadlock issue caused by
nested script API calls by adding support for recursive mutexes.
When compiled with optimizations, the most recent versions of clang seem
to 'optimize' out a crucial "and %reg, 0x7FFFFFFF" instruction in noise2d(),
probably because it somehow assumed the variable n would never become greater
than that amount.
Indeed, signed integer underflow is undefined behavior in C and C++, so while
this optimization is "correct" in that sense, it breaks lots of existing code.
Solved by changing n to an unsigned type, making behavior well-defined.
Previously, the server called FATAL_ERROR when a Lua error occured.
This caused a (mostly useless) core dump.
The server now simply throws an exception, which is caught and printed before
exiting with a non-zero return value.
This also fixes a number of instances where errors were logged multiple times.
Increase default from 6 to 16 to help with mgv7 and mgfractal
Large-scale or alternative mapgens can result in a lowland spawn point not
being found, causing a spawn at (0, 0, 0) possibly buried underground
The max height is now settable to allow correct player spawn
in any mapgen or when using custom noise parameters
Use this macro to disallow copying of an object using the assignment
operator or copy constructor. This catches otherwise silent-but-deadly
mistakes such as "ServerMap map = env->getMap();" at compile time.
If so desired, it is still possible to copy a class, but it now requires
an explicit call to memcpy or std::copy.
-> Put access to time variables under the time lock.
-> Merge both time locks, there is no point to have two locks.
-> Fix the lock being released too early in Environment::setTimeOfDay
-> Add serverside getter so that you don't have to get
the environment if you only have the server
Previously, the invocation of Logger::addOutput(ILogOutput *out) led to
an out of bounds write of the m_outputs vector, resulting in the
m_silenced_levels array being modified.
Fortunately, the only caller of that method was android system logging,
and only since a few commits ago.
-> Get rid of Logger::logToSystem and use normal downstream output system for android instead
-> Give the downstream output system more information: enrich the log function of ILogOutput
with information and add ICombinedLogOutput for easier use.
-> Make Logger::getLevelLabel() static and public so that it can be used by downstream log output.
-> Add g_ and m_ prefixes where required
* Add key settings to setting table and ignore them later
This way they are added to the auto-generated minetest.conf.example
* Add flags type
* Add input validation for int, float and flags
* Break in-game graphic settings into multiple sections
* Parse settingtpes.txt in mods and games
* Improve description for a lot of settings
* Fix typos and wording in settingtypes.txt
* Convert language setting to an enum
Flushes the buffer of rollback actions that wait to get saved in two more situations:
1. Flushes in the destructor of the rollback. This makes the server not
forget the last < 500 rollback entries when it shuts down.
2. Flushes the rollback when /rollback_check is invoked. This is neccessary
as otherwise it leads to confusion if users want to test the rollback functionality
by placing a node and then executing the check on it, or if the actions were
very recent out of other reasons.
