mailiverse/deploy/james/apache-james-conf/smtpserver.conf
2013-08-09 17:31:37 -04:00

315 lines
15 KiB
Plaintext

<!--
Licensed to the Apache Software Foundation (ASF) under one
or more contributor license agreements. See the NOTICE file
distributed with this work for additional information
regarding copyright ownership. The ASF licenses this file
to you under the Apache License, Version 2.0 (the
"License"); you may not use this file except in compliance
with the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing,
software distributed under the License is distributed on an
"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
KIND, either express or implied. See the License for the
specific language governing permissions and limitations
under the License.
-->
<!--
This template file can be used as example for James Server configuration
DO NOT USE IT AS SUCH AND ADAPT IT TO YOUR NEEDS
-->
<!-- See http://james.apache.org/server/3/config.html for usage -->
<smtpservers>
<!-- The SMTP server is enabled by default -->
<!-- Disabling blocks will stop them from listening, -->
<!-- but does not free as many resources as removing them would -->
<smtpserver enabled="true">
<jmxName>smtpserver</jmxName>
<!-- Configure this to bind to a specific inetaddress -->
<!-- Please NOTE: you should add this IP also to your RemoteAddrNotInNetwork -->
<!-- in order to avoid relay check for locallly generated bounces -->
<!--
Port 25 is the well-known/IANA registered port for SMTP.
Port 465 is the well-known/IANA registered port for SMTP over TLS.
-->
<bind>0.0.0.0:10025</bind>
<connectionBacklog>200</connectionBacklog>
<!-- Set to true to support STARTTLS or TLS for the Socket.
To use this you need to copy sunjce_provider.jar to /path/james/lib directory.
-->
<tls socketTLS="false" startTLS="true">
<keystore>file://conf/keystore</keystore>
<secret>password</secret>
<provider>org.bouncycastle.jce.provider.BouncyCastleProvider</provider>
<!-- The algorithm is optional and only needs to be specified when using something other
than the Sun JCE provider - You could use IbmX509 with IBM Java runtime. -->
<algorithm>SunX509</algorithm>
</tls>
<!-- This is the name used by the server to identify itself in the SMTP -->
<!-- protocol. If autodetect is TRUE, the server will discover its -->
<!-- own host name and use that in the protocol. If discovery fails, -->
<!-- the value of 'localhost' is used. If autodetect is FALSE, James -->
<!-- will use the specified value. -->
<helloName autodetect="false">mail.mailiverse.com</helloName>
<!-- connection timeout in secconds -->
<connectiontimeout>360</connectiontimeout>
<!-- Set the maximum simultaneous incoming connections for this service -->
<connectionLimit>0</connectionLimit>
<!-- Set the maximum simultaneous incoming connections per IP for this service -->
<connectionLimitPerIP>0</connectionLimitPerIP>
<!-- Uncomment this if you want to require SMTP authentication.
supported values:
true: required but announced only to not authorizedAddresses
false: don't use AUTH
announce: like true, but always announce AUTH capability to clients
The correct behaviour per RFC value would be false or announce
but we still support true for backward compatibility and because
some webmail client fails when AUTH is announced but no authentication
information has been provided
-->
<authRequired>true</authRequired>
<!-- CHECKME! -->
<!-- Uncomment this if you want to authorize specific addresses/networks.
If you use SMTP AUTH, addresses that match those specified here will
be permitted to relay without SMTP AUTH. If you do not use SMTP
AUTH, and you specify addreses here, then only addresses that match
those specified will be permitted to relay.
Addresses may be specified as a an IP address or domain name, with an
optional netmask, e.g.,
127.*, 127.0.0.0/8, 127.0.0.0/255.0.0.0, and localhost/8 are all the same
See also the RemoteAddrNotInNetwork matcher in the transport processor.
You would generally use one OR the other approach.
-->
<!-- <authorizedAddresses>127.0.0.0/8</authorizedAddresses> -->
<!-- Uncomment this if you want to verify sender addresses, ensuring that -->
<!-- the sender address matches the user who has authenticated. -->
<!-- This prevents a user of your mail server from acting as someone else -->
<!-- If unspecified, default value is true -->
<!--
<verifyIdentity>true</verifyIdentity>
-->
<!-- This sets the maximum allowed message size (in kilobytes) for this -->
<!-- SMTP service. If unspecified, the value defaults to 0, which means no limit. -->
<maxmessagesize>0</maxmessagesize>
<!-- This sets wether to enforce the use of HELO/EHLO salutation before a -->
<!-- MAIL command is accepted. If unspecified, the value defaults to true -->
<!--
<heloEhloEnforcement>true</heloEhloEnforcement>
-->
<!-- WARNING: This is Non-RFC compliant (default value: true) -->
<!-- See: http://wiki.apache.org/james/StandardsComplianceStatement -->
<!-- TODO: CHANGE TO OFFICIAL URL LATER -->
<addressBracketsEnforcement>true</addressBracketsEnforcement>
<!-- This sets the SMTPGreeting which will be used when connect to the smtpserver -->
<!-- If none is specified a default is generated -->
<!--
<smtpGreeting>JAMES SMTP Server</smtpGreeting>
-->
<!-- The configuration handler chain -->
<handlerchain>
<!-- This connect handler can be used to enable POP3 before SMTP support -->
<!-- Plz note that only the ip get stored to indentify an authenticated client -->
<!-- The expireTime is the time after which an ipAddress is handled as expired -->
<!--
<handler class="org.apache.james.smtpserver.POP3BeforeSMTPHandler">
<expireTime>1 hour</expireTime>
</handler>
-->
<!-- This command handler check against RBL-Lists -->
<!-- If getDetail is set to true it try to retrieve information from TXT Record -->
<!-- why the ip was blocked. Default to false -->
<!-- STOP - before you uncomment out the DNS RBL handler,
please take a moment to review each block list. We
have included some that various JAMES committers use,
but you must decide which, if any, are appropriate
for your environment. The mail servers hosting
@apache.org mailing lists, for example, use a
slightly different list than we have included below.
And it is likely that most JAMES committes also have
slightly different sets of lists. The SpamAssassin
user's list would be one good place to discuss the
measured quality of various block lists.
NOTA BENE: the domain names, below, are terminated
with '.' to ensure that they are absolute names in
DNS lookups. Under some circumstances, names that
are not explicitly absolute could be treated as
relative names, leading to incorrect results. This
has been observed on *nix and MS-Windows platforms
by users of multiple mail servers, and is not JAMES
specific. If you are unsure what this means for you,
please speak with your local system/network admins.
-->
<handler class="org.apache.james.smtpserver.fastfail.DNSRBLHandler">
<getDetail>false</getDetail>
<rblservers>
<whitelist>query.bondedsender.org.</whitelist>
<!--
<blacklist>sbl-xbl.spamhaus.org.</blacklist>
<blacklist>dul.dnsbl.sorbs.net.</blacklist>
<blacklist>list.dsbl.org.</blacklist>
-->
</rblservers>
</handler>
<!-- This command handler can be used to reject emails with not match the SPF record of the sender domain -->
<!-- If checkAuthNetworks is set to true sender domain will be checked also for clients that -->
<!-- are allowed to relay. Default is false. -->
<!--
<handler class="org.apache.james.smtpserver.fastfail.SPFHandler">
<blockSoftFail>false</blockSoftFail>
<blockPermError>true</blockPermError>
</handler>
-->
<!-- checks for resolvable HELO/EHLO before accept the HELO/EHLO -->
<!-- If checkAuthNetworks is set to true sender domain will be checked also for clients that -->
<!-- are allowed to relay. Default is false. -->
<!--
<handler class="org.apache.james.smtpserver.fastfail.ResolvableEhloHeloHandler"/>
-->
<!-- Checks HELO/EHLO is equal the reverse of the connecting client before accept it -->
<!-- If checkAuthNetworks is set to true sender domain will be checked also for clients that -->
<!-- are allowed to relay. Default is false. -->
<!--
<handler class="org.apache.james.smtpserver.fastfail.ReverseEqualsEhloHeloHandler"/>
-->
<!-- If activated mail is only accepted if the sender contains -->
<!-- a resolvable domain having a valid MX Record or A Record associated! -->
<!-- If checkAuthNetworks is set to true sender domain will be checked also for clients that -->
<!-- are allowed to relay. Default is false. -->
<handler class="org.apache.james.smtpserver.fastfail.ValidSenderDomainHandler"/>
<!-- With ValidRcptHandler, all email will get rejected which has no valid user -->
<!-- You need to add the recipient to the validRecipient list if you want -->
<!-- to accept email for a recipient which not exist on the server -->
<!-- If you want James to act as a spamtrap or honeypot, you may comment ValidRcptHandler -->
<!-- and implement the needed processors in spoolmanager.xml -->
<handler class="org.apache.james.smtpserver.fastfail.ValidRcptHandler"/>
<!-- If activated you can limit the maximal recipients -->
<!--
<handler class="org.apache.james.smtpserver.fastfail.MaxRcptHandler">
<maxRcpt>10</maxRcpt>
</handler>
-->
<!-- If uncomment this block you can enable greylisting. For more infos-->
<!-- how greylisting work see: http://projects.puremagic.com/greylisting/whitepaper.html -->
<!--
<handler class="org.apache.james.smtpserver.fastfail.JDBCGreylistHandler">
<repositoryPath>db://maildb</repositoryPath>
<sqlFile>file://conf/sqlResources.xml</sqlFile>
<tempBlockTime>1 hour</tempBlockTime>
<unseenLifeTime>4 hours</unseenLifeTime>
<autoWhiteListLifeTime>36 days</autoWhiteListLifeTime>
<whitelistedNetworks>127.0.0.0/8</whitelistedNetworks>
</handler>
-->
<!-- Tarpitting is a method to insert a small sleep after each rcpt. For more -->
<!-- infos read this: http://www.palomine.net/qmail/tarpit.html . -->
<!-- Default is set to 0 (disabled). -->
<!-- You can also configure the time to sleep in milliseconds -->
<!--
<handler class="org.apache.james.smtpserver.fastfail.TarpitHandler">
<tarpitRcptCount>5</tarpitRcptCount>
<tarpitSleepTime>5000</tarpitSleepTime>
</handler>
-->
<!-- This handler ignore duplicated recipients per session. So the email will get only send on time even -->
<!-- if the recipient is specified more then once -->
<!--
<handler class="org.apache.james.smtpserver.protocol.core.fastfail.SuppressDuplicateRcptHandler"/>
-->
<!-- Load the core command handlers -->
<handler class="org.apache.james.smtpserver.CoreCmdHandlerLoader"/>
<!-- This handler can add a hint to the mail which tells the MailQueue which email should get processed first -->
<!-- Normally the MailQueue will just handles Mails in FIFO manner -->
<!-- Valid priority values are 1,5,9 where 9 is the highest-->
<!--
<handler class="org.apache.james.smtpserver.MailPriortyHandler">
<priorityEntries>
<priorityEntry>
<domain>yourdomain1</domain>
<priority>1</priority>
</priorityEntry>
<priorityEntry>
<domain>yourdomain2</domain>
<priority>9</priority>
</priorityEntry>
<priorityEntries>
</handler>
-->
<!-- This MessageHandler could be used to check message against spamd before -->
<!-- accept the email. So its possible to reject a message on smtplevel if a -->
<!-- configured hits amount is reached. -->
<!--
<handler class="org.apache.james.smtpserver.fastfail.SpamAssassinHandler">
<spamdHost>127.0.0.1</spamdHost>
<spamdPort>783</spamdPort>
<spamdRejectionHits>10</spamdRejectionHits>
</handler>
-->
<!-- This MessageHandler could be used to extract domain out of the message and check -->
<!-- this domains against uriRbllists. See http://www.surbl.org for more informations. -->
<!-- The message get rejected if a domain matched . -->
<!--
<handler class="org.apache.james.smtpserver.fastfail.URIRBLHandler">
<action>reject</action>
<getDetail>true</getDetail>
<uriRblServers>
<server>multi.surbl.org</server>
</uriRblServers>
</handler>
-->
<!--
<handler class="org.apache.james.smtpserver.SetMimeHeaderHandler">
<headername>SPF-test</headername>
<headervalue>passed</headervalue>
</handler>
-->
</handlerchain>
</smtpserver>
</smtpservers>