moves the config to lower directory, makes the keys generate automatically

build/comma

@@ -0,0 +1 @@
+,

build/compile-web-html

@@ -4,7 +4,7 @@ set -x
 V=$1
 M=$2
 
-APP_TITLE=`cat ../deploy/config/title`
+APP_TITLE=`cat ../config/title`
 
 dst=www
 cmn_src=../web/common

build/compile-web-js

@@ -4,10 +4,10 @@ V=$1
 M=$2
 dst=www
 
-HOST_PRIMARY=`cat ../deploy/config/hosts/$M`
-HOST_AUTH=`cat ../deploy/config/hosts/auth_$M`
-HOST_TOMCAT=`cat ../deploy/config/hosts/tomcat_$M`
-HOST_WEB=`cat ../deploy/config/hosts/web_$M`
+HOST_PRIMARY=`cat ../config/hosts/$M`
+HOST_AUTH=`cat ../config/hosts/auth_$M`
+HOST_TOMCAT=`cat ../config/hosts/tomcat_$M`
+HOST_WEB=`cat ../config/hosts/web_$M`
 
 function replaceStrings() {
 	sed -i '' -f replace_js_$M.sed $1

build/quote

@@ -0,0 +1 @@
+"

build/replace_html.sed

@@ -24,4 +24,8 @@
   d
 }
 
+/{##COMPANY##}/ {
+  r ../config/company
+  d
+}
 

build/replace_js_dev.sed

@@ -4,3 +4,18 @@
   d
 }
 
+/{##TRUSTSTORE_AUTH##}/ {
+  r quote
+  r ../config/truststores/auth.jks.b64
+  r quote
+  r comma
+  d
+}
+
+/{##TRUSTSTORE_SEND##}/ {
+  r quote
+  r ../config/truststores/send.jks.b64
+  r quote
+  r comma
+  d
+}

build/replace_js_prod.sed

@@ -2,3 +2,19 @@
   r ../web/common/Link.ConstantsProd.html
   d
 }
+
+/{##TRUSTSTORE_AUTH##}/ {
+  r quote
+  r ../config/truststores/auth.jks.b64
+  r quote
+  r comma
+  d
+}
+
+/{##TRUSTSTORE_SEND##}/ {
+  r quote
+  r ../config/truststores/send.jks.b64
+  r quote
+  r comma
+  d
+}

config/company

@@ -0,0 +1 @@
+Your Company Inc.

config/truststores/auth.jks.b64

@@ -0,0 +1 @@
+../../keys/mail/truststore.jks.pem.b64

config/truststores/send.jks.b64

@@ -0,0 +1 @@
+../../keys/localrelay/truststore.jks.pem.b64

deploy/config.hosts

@@ -1,2 +1,2 @@
-M_HOST_PROD=`cat config/hosts/web_prod`
-M_HOST_DEV=`cat config/hosts/web_dev`
+M_HOST_PROD=`cat ../config/hosts/web_prod`
+M_HOST_DEV=`cat ../config/hosts/web_dev`

install/setup-web.remote

@@ -3,13 +3,15 @@ set -x
 sudo ./setup-nginx.remote
 
 sudo mkdir -p /var/log/nginx
+chdown nginx /var/log/nginx
+
 cp sudoers.d-web /etc/sudoers.d/web
 chmod 0440 /etc/sudoers.d/web
 
 cd /opt/nginx/conf
-ln -s /home/web/resources/nginx-ssl.crt
-ln -s /home/web/resources/nginx-ssl.key
-ln -s /home/web/resources/nginx.conf
+ln -fs /home/web/resources/nginx-ssl.crt
+ln -fs /home/web/resources/nginx-ssl.key
+ln -fs /home/web/resources/nginx.conf
 
 cd /var/local
 mkdir www

keys/clean.autos

@@ -0,0 +1,5 @@
+(cd mail && ./clean)
+(cd localrelay && ./clean)
+(cd key && ./clean)
+(cd client && ./clean)
+(cd push && ./clean)

keys/client/clean

@@ -0,0 +1,3 @@
+rm *.jks
+rm *.cer
+rm *.b64

keys/client/make

@@ -1,3 +1,5 @@
-keytool -genkeypair -alias client -keyalg RSA -keysize 2048 -keystore keystore.jks
-keytool -export -alias client -keystore keystore.jks -rfc -file selfsignedcert.cer
-keytool -import -alias client -file selfsignedcert.cer -keystore truststore.jks
+keytool -genkeypair -alias anonymous -keyalg RSA -keysize 2048 -keystore keystore.jks
+keytool -export -alias anonymous -keystore keystore.jks -rfc -file selfsignedcert.cer
+keytool -import -alias anonymous -file selfsignedcert.cer -keystore truststore.jks
+java -jar ../../build/exported/Tools.jar --export-pem file=truststore.jks
+

keys/client/make.auto

@@ -0,0 +1,101 @@
+#!/opt/local/bin/expect -f
+#
+# This Expect script was generated by autoexpect on Thu Sep  5 10:43:19 2013
+# Expect and autoexpect were both written by Don Libes, NIST.
+#
+# Note that autoexpect does not guarantee a working script.  It
+# necessarily has to guess about certain things.  Two reasons a script
+# might fail are:
+#
+# 1) timing - A surprising number of programs (rn, ksh, zsh, telnet,
+# etc.) and devices discard or ignore keystrokes that arrive "too
+# quickly" after prompts.  If you find your new script hanging up at
+# one spot, try adding a short sleep just before the previous send.
+# Setting "force_conservative" to 1 (see below) makes Expect do this
+# automatically - pausing briefly before sending each character.  This
+# pacifies every program I know of.  The -c flag makes the script do
+# this in the first place.  The -C flag allows you to define a
+# character to toggle this mode off and on.
+
+set force_conservative 0  ;# set to 1 to force conservative mode even if
+			  ;# script wasn't run conservatively originally
+if {$force_conservative} {
+	set send_slow {1 .1}
+	proc send {ignore arg} {
+		sleep .1
+		exp_send -s -- $arg
+	}
+}
+
+#
+# 2) differing output - Some programs produce different output each time
+# they run.  The "date" command is an obvious example.  Another is
+# ftp, if it produces throughput statistics at the end of a file
+# transfer.  If this causes a problem, delete these patterns or replace
+# them with wildcards.  An alternative is to use the -p flag (for
+# "prompt") which makes Expect only look for the last line of output
+# (i.e., the prompt).  The -P flag allows you to define a character to
+# toggle this mode off and on.
+#
+# Read the man page for more info.
+#
+# -Don
+
+
+set timeout -1
+spawn ./make
+match_max 100000
+expect -exact "Enter keystore password:  "
+send -- "password\r"
+expect -exact "\r
+Re-enter new password: "
+send -- "password\r"
+expect -exact "\r
+What is your first and last name?\r
+  \[Unknown\]:  "
+send -- "\r"
+expect -exact "\r
+What is the name of your organizational unit?\r
+  \[Unknown\]:  "
+send -- "\r"
+expect -exact "\r
+What is the name of your organization?\r
+  \[Unknown\]:  "
+send -- "\r"
+expect -exact "\r
+What is the name of your City or Locality?\r
+  \[Unknown\]:  "
+send -- "\r"
+expect -exact "\r
+What is the name of your State or Province?\r
+  \[Unknown\]:  "
+send -- "\r"
+expect -exact "\r
+What is the two-letter country code for this unit?\r
+  \[Unknown\]:  "
+send -- "\r"
+expect -exact "\r
+Is CN=Unknown, OU=Unknown, O=Unknown, L=Unknown, ST=Unknown, C=Unknown correct?\r
+  \[no\]:  "
+send -- "yes\r"
+expect -exact "yes\r
+\r
+Enter key password for <anonymous>\r
+	(RETURN if same as keystore password):  "
+send -- "password\r"
+expect -exact "\r
+Re-enter new password: "
+send -- "password\r"
+expect -exact "\r
+Enter keystore password:  "
+send -- "password\r"
+expect -exact "\r
+Certificate stored in file <selfsignedcert.cer>\r
+Enter keystore password:  "
+send -- "password\r"
+expect -exact "\r
+Re-enter new password: "
+send -- "password\r"
+sleep 1
+send -- "yes\r"
+expect eof

keys/key/clean

@@ -0,0 +1,3 @@
+rm *.jks
+rm *.cer
+rm *.b64

keys/key/make

@@ -1,3 +1,5 @@
-keytool -genkeypair -alias piratekey -keyalg RSA -keysize 2048 -keystore keystore.jks
-keytool -export -alias piratekey -keystore keystore.jks -rfc -file selfsignedcert.cer
-keytool -import -alias piratekey -file selfsignedcert.cer -keystore truststore.jks
+keytool -genkeypair -alias anonymous -keyalg RSA -keysize 2048 -keystore keystore.jks
+keytool -export -alias anonymous -keystore keystore.jks -rfc -file selfsignedcert.cer
+keytool -import -alias anonymous -file selfsignedcert.cer -keystore truststore.jks
+java -jar ../../build/exported/Tools.jar --export-pem file=truststore.jks
+

keys/key/make.auto

@@ -0,0 +1,101 @@
+#!/opt/local/bin/expect -f
+#
+# This Expect script was generated by autoexpect on Thu Sep  5 10:43:19 2013
+# Expect and autoexpect were both written by Don Libes, NIST.
+#
+# Note that autoexpect does not guarantee a working script.  It
+# necessarily has to guess about certain things.  Two reasons a script
+# might fail are:
+#
+# 1) timing - A surprising number of programs (rn, ksh, zsh, telnet,
+# etc.) and devices discard or ignore keystrokes that arrive "too
+# quickly" after prompts.  If you find your new script hanging up at
+# one spot, try adding a short sleep just before the previous send.
+# Setting "force_conservative" to 1 (see below) makes Expect do this
+# automatically - pausing briefly before sending each character.  This
+# pacifies every program I know of.  The -c flag makes the script do
+# this in the first place.  The -C flag allows you to define a
+# character to toggle this mode off and on.
+
+set force_conservative 0  ;# set to 1 to force conservative mode even if
+			  ;# script wasn't run conservatively originally
+if {$force_conservative} {
+	set send_slow {1 .1}
+	proc send {ignore arg} {
+		sleep .1
+		exp_send -s -- $arg
+	}
+}
+
+#
+# 2) differing output - Some programs produce different output each time
+# they run.  The "date" command is an obvious example.  Another is
+# ftp, if it produces throughput statistics at the end of a file
+# transfer.  If this causes a problem, delete these patterns or replace
+# them with wildcards.  An alternative is to use the -p flag (for
+# "prompt") which makes Expect only look for the last line of output
+# (i.e., the prompt).  The -P flag allows you to define a character to
+# toggle this mode off and on.
+#
+# Read the man page for more info.
+#
+# -Don
+
+
+set timeout -1
+spawn ./make
+match_max 100000
+expect -exact "Enter keystore password:  "
+send -- "password\r"
+expect -exact "\r
+Re-enter new password: "
+send -- "password\r"
+expect -exact "\r
+What is your first and last name?\r
+  \[Unknown\]:  "
+send -- "\r"
+expect -exact "\r
+What is the name of your organizational unit?\r
+  \[Unknown\]:  "
+send -- "\r"
+expect -exact "\r
+What is the name of your organization?\r
+  \[Unknown\]:  "
+send -- "\r"
+expect -exact "\r
+What is the name of your City or Locality?\r
+  \[Unknown\]:  "
+send -- "\r"
+expect -exact "\r
+What is the name of your State or Province?\r
+  \[Unknown\]:  "
+send -- "\r"
+expect -exact "\r
+What is the two-letter country code for this unit?\r
+  \[Unknown\]:  "
+send -- "\r"
+expect -exact "\r
+Is CN=Unknown, OU=Unknown, O=Unknown, L=Unknown, ST=Unknown, C=Unknown correct?\r
+  \[no\]:  "
+send -- "yes\r"
+expect -exact "yes\r
+\r
+Enter key password for <anonymous>\r
+	(RETURN if same as keystore password):  "
+send -- "password\r"
+expect -exact "\r
+Re-enter new password: "
+send -- "password\r"
+expect -exact "\r
+Enter keystore password:  "
+send -- "password\r"
+expect -exact "\r
+Certificate stored in file <selfsignedcert.cer>\r
+Enter keystore password:  "
+send -- "password\r"
+expect -exact "\r
+Re-enter new password: "
+send -- "password\r"
+sleep 1
+send -- "yes\r"
+expect eof

keys/localrelay/clean

@@ -0,0 +1,3 @@
+rm *.jks
+rm *.cer
+rm *.b64

keys/localrelay/make

@@ -1,3 +1,5 @@
-keytool -genkeypair -alias localrelay.mailiverse -keyalg RSA -keysize 2048 -keystore keystore.jks
-keytool -export -alias localrelay.mailiverse -keystore keystore.jks -rfc -file selfsignedcert.cer
-keytool -import -alias localrelay.mailiverse -file selfsignedcert.cer -keystore truststore.jks
+keytool -genkeypair -alias anonymous -keyalg RSA -keysize 2048 -keystore keystore.jks
+keytool -export -alias anonymous -keystore keystore.jks -rfc -file selfsignedcert.cer
+keytool -import -alias anonymous -file selfsignedcert.cer -keystore truststore.jks
+java -jar ../../build/exported/Tools.jar --export-pem file=truststore.jks
+

keys/localrelay/make.auto

@@ -0,0 +1,101 @@
+#!/opt/local/bin/expect -f
+#
+# This Expect script was generated by autoexpect on Thu Sep  5 10:43:19 2013
+# Expect and autoexpect were both written by Don Libes, NIST.
+#
+# Note that autoexpect does not guarantee a working script.  It
+# necessarily has to guess about certain things.  Two reasons a script
+# might fail are:
+#
+# 1) timing - A surprising number of programs (rn, ksh, zsh, telnet,
+# etc.) and devices discard or ignore keystrokes that arrive "too
+# quickly" after prompts.  If you find your new script hanging up at
+# one spot, try adding a short sleep just before the previous send.
+# Setting "force_conservative" to 1 (see below) makes Expect do this
+# automatically - pausing briefly before sending each character.  This
+# pacifies every program I know of.  The -c flag makes the script do
+# this in the first place.  The -C flag allows you to define a
+# character to toggle this mode off and on.
+
+set force_conservative 0  ;# set to 1 to force conservative mode even if
+			  ;# script wasn't run conservatively originally
+if {$force_conservative} {
+	set send_slow {1 .1}
+	proc send {ignore arg} {
+		sleep .1
+		exp_send -s -- $arg
+	}
+}
+
+#
+# 2) differing output - Some programs produce different output each time
+# they run.  The "date" command is an obvious example.  Another is
+# ftp, if it produces throughput statistics at the end of a file
+# transfer.  If this causes a problem, delete these patterns or replace
+# them with wildcards.  An alternative is to use the -p flag (for
+# "prompt") which makes Expect only look for the last line of output
+# (i.e., the prompt).  The -P flag allows you to define a character to
+# toggle this mode off and on.
+#
+# Read the man page for more info.
+#
+# -Don
+
+
+set timeout -1
+spawn ./make
+match_max 100000
+expect -exact "Enter keystore password:  "
+send -- "password\r"
+expect -exact "\r
+Re-enter new password: "
+send -- "password\r"
+expect -exact "\r
+What is your first and last name?\r
+  \[Unknown\]:  "
+send -- "\r"
+expect -exact "\r
+What is the name of your organizational unit?\r
+  \[Unknown\]:  "
+send -- "\r"
+expect -exact "\r
+What is the name of your organization?\r
+  \[Unknown\]:  "
+send -- "\r"
+expect -exact "\r
+What is the name of your City or Locality?\r
+  \[Unknown\]:  "
+send -- "\r"
+expect -exact "\r
+What is the name of your State or Province?\r
+  \[Unknown\]:  "
+send -- "\r"
+expect -exact "\r
+What is the two-letter country code for this unit?\r
+  \[Unknown\]:  "
+send -- "\r"
+expect -exact "\r
+Is CN=Unknown, OU=Unknown, O=Unknown, L=Unknown, ST=Unknown, C=Unknown correct?\r
+  \[no\]:  "
+send -- "yes\r"
+expect -exact "yes\r
+\r
+Enter key password for <anonymous>\r
+	(RETURN if same as keystore password):  "
+send -- "password\r"
+expect -exact "\r
+Re-enter new password: "
+send -- "password\r"
+expect -exact "\r
+Enter keystore password:  "
+send -- "password\r"
+expect -exact "\r
+Certificate stored in file <selfsignedcert.cer>\r
+Enter keystore password:  "
+send -- "password\r"
+expect -exact "\r
+Re-enter new password: "
+send -- "password\r"
+sleep 1
+send -- "yes\r"
+expect eof

keys/mail/clean

@@ -0,0 +1,3 @@
+rm *.jks
+rm *.cer
+rm *.b64

keys/mail/make

@@ -1,3 +1,4 @@
-keytool -genkeypair -alias piratemail -keyalg RSA -keysize 2048 -keystore keystore.jks
-keytool -export -alias piratemail -keystore keystore.jks -rfc -file selfsignedcert.cer
-keytool -import -alias piratemail -file selfsignedcert.cer -keystore truststore.jks
+keytool -genkeypair -alias anonymous -keyalg RSA -keysize 2048 -keystore keystore.jks
+keytool -export -alias anonymous -keystore keystore.jks -rfc -file selfsignedcert.cer
+keytool -import -alias anonymous -file selfsignedcert.cer -keystore truststore.jks
+java -jar ../../build/exported/Tools.jar --export-pem file=truststore.jks

keys/mail/make.auto

@@ -0,0 +1,101 @@
+#!/opt/local/bin/expect -f
+#
+# This Expect script was generated by autoexpect on Thu Sep  5 10:43:19 2013
+# Expect and autoexpect were both written by Don Libes, NIST.
+#
+# Note that autoexpect does not guarantee a working script.  It
+# necessarily has to guess about certain things.  Two reasons a script
+# might fail are:
+#
+# 1) timing - A surprising number of programs (rn, ksh, zsh, telnet,
+# etc.) and devices discard or ignore keystrokes that arrive "too
+# quickly" after prompts.  If you find your new script hanging up at
+# one spot, try adding a short sleep just before the previous send.
+# Setting "force_conservative" to 1 (see below) makes Expect do this
+# automatically - pausing briefly before sending each character.  This
+# pacifies every program I know of.  The -c flag makes the script do
+# this in the first place.  The -C flag allows you to define a
+# character to toggle this mode off and on.
+
+set force_conservative 0  ;# set to 1 to force conservative mode even if
+			  ;# script wasn't run conservatively originally
+if {$force_conservative} {
+	set send_slow {1 .1}
+	proc send {ignore arg} {
+		sleep .1
+		exp_send -s -- $arg
+	}
+}
+
+#
+# 2) differing output - Some programs produce different output each time
+# they run.  The "date" command is an obvious example.  Another is
+# ftp, if it produces throughput statistics at the end of a file
+# transfer.  If this causes a problem, delete these patterns or replace
+# them with wildcards.  An alternative is to use the -p flag (for
+# "prompt") which makes Expect only look for the last line of output
+# (i.e., the prompt).  The -P flag allows you to define a character to
+# toggle this mode off and on.
+#
+# Read the man page for more info.
+#
+# -Don
+
+
+set timeout -1
+spawn ./make
+match_max 100000
+expect -exact "Enter keystore password:  "
+send -- "password\r"
+expect -exact "\r
+Re-enter new password: "
+send -- "password\r"
+expect -exact "\r
+What is your first and last name?\r
+  \[Unknown\]:  "
+send -- "\r"
+expect -exact "\r
+What is the name of your organizational unit?\r
+  \[Unknown\]:  "
+send -- "\r"
+expect -exact "\r
+What is the name of your organization?\r
+  \[Unknown\]:  "
+send -- "\r"
+expect -exact "\r
+What is the name of your City or Locality?\r
+  \[Unknown\]:  "
+send -- "\r"
+expect -exact "\r
+What is the name of your State or Province?\r
+  \[Unknown\]:  "
+send -- "\r"
+expect -exact "\r
+What is the two-letter country code for this unit?\r
+  \[Unknown\]:  "
+send -- "\r"
+expect -exact "\r
+Is CN=Unknown, OU=Unknown, O=Unknown, L=Unknown, ST=Unknown, C=Unknown correct?\r
+  \[no\]:  "
+send -- "yes\r"
+expect -exact "yes\r
+\r
+Enter key password for <anonymous>\r
+	(RETURN if same as keystore password):  "
+send -- "password\r"
+expect -exact "\r
+Re-enter new password: "
+send -- "password\r"
+expect -exact "\r
+Enter keystore password:  "
+send -- "password\r"
+expect -exact "\r
+Certificate stored in file <selfsignedcert.cer>\r
+Enter keystore password:  "
+send -- "password\r"
+expect -exact "\r
+Re-enter new password: "
+send -- "password\r"
+sleep 1
+send -- "yes\r"
+expect eof

keys/make.autos

@@ -0,0 +1,5 @@
+(cd mail && ./make.auto)
+(cd localrelay && ./make.auto)
+(cd key && ./make.auto)
+(cd client && ./make.auto)
+(cd push && ./make.auto)

keys/push/clean

@@ -0,0 +1,3 @@
+rm *.jks
+rm *.cer
+rm *.b64

keys/push/make

@@ -1,3 +1,5 @@
-keytool -genkeypair -alias client -keyalg RSA -keysize 2048 -keystore keystore.jks
-keytool -export -alias client -keystore keystore.jks -rfc -file selfsignedcert.cer
-keytool -import -alias client -file selfsignedcert.cer -keystore truststore.jks
+keytool -genkeypair -alias anonymous -keyalg RSA -keysize 2048 -keystore keystore.jks
+keytool -export -alias anonymous -keystore keystore.jks -rfc -file selfsignedcert.cer
+keytool -import -alias anonymous -file selfsignedcert.cer -keystore truststore.jks
+java -jar ../../build/exported/Tools.jar --export-pem file=truststore.jks
+

keys/push/make.auto

@@ -0,0 +1,101 @@
+#!/opt/local/bin/expect -f
+#
+# This Expect script was generated by autoexpect on Thu Sep  5 10:43:19 2013
+# Expect and autoexpect were both written by Don Libes, NIST.
+#
+# Note that autoexpect does not guarantee a working script.  It
+# necessarily has to guess about certain things.  Two reasons a script
+# might fail are:
+#
+# 1) timing - A surprising number of programs (rn, ksh, zsh, telnet,
+# etc.) and devices discard or ignore keystrokes that arrive "too
+# quickly" after prompts.  If you find your new script hanging up at
+# one spot, try adding a short sleep just before the previous send.
+# Setting "force_conservative" to 1 (see below) makes Expect do this
+# automatically - pausing briefly before sending each character.  This
+# pacifies every program I know of.  The -c flag makes the script do
+# this in the first place.  The -C flag allows you to define a
+# character to toggle this mode off and on.
+
+set force_conservative 0  ;# set to 1 to force conservative mode even if
+			  ;# script wasn't run conservatively originally
+if {$force_conservative} {
+	set send_slow {1 .1}
+	proc send {ignore arg} {
+		sleep .1
+		exp_send -s -- $arg
+	}
+}
+
+#
+# 2) differing output - Some programs produce different output each time
+# they run.  The "date" command is an obvious example.  Another is
+# ftp, if it produces throughput statistics at the end of a file
+# transfer.  If this causes a problem, delete these patterns or replace
+# them with wildcards.  An alternative is to use the -p flag (for
+# "prompt") which makes Expect only look for the last line of output
+# (i.e., the prompt).  The -P flag allows you to define a character to
+# toggle this mode off and on.
+#
+# Read the man page for more info.
+#
+# -Don
+
+
+set timeout -1
+spawn ./make
+match_max 100000
+expect -exact "Enter keystore password:  "
+send -- "password\r"
+expect -exact "\r
+Re-enter new password: "
+send -- "password\r"
+expect -exact "\r
+What is your first and last name?\r
+  \[Unknown\]:  "
+send -- "\r"
+expect -exact "\r
+What is the name of your organizational unit?\r
+  \[Unknown\]:  "
+send -- "\r"
+expect -exact "\r
+What is the name of your organization?\r
+  \[Unknown\]:  "
+send -- "\r"
+expect -exact "\r
+What is the name of your City or Locality?\r
+  \[Unknown\]:  "
+send -- "\r"
+expect -exact "\r
+What is the name of your State or Province?\r
+  \[Unknown\]:  "
+send -- "\r"
+expect -exact "\r
+What is the two-letter country code for this unit?\r
+  \[Unknown\]:  "
+send -- "\r"
+expect -exact "\r
+Is CN=Unknown, OU=Unknown, O=Unknown, L=Unknown, ST=Unknown, C=Unknown correct?\r
+  \[no\]:  "
+send -- "yes\r"
+expect -exact "yes\r
+\r
+Enter key password for <anonymous>\r
+	(RETURN if same as keystore password):  "
+send -- "password\r"
+expect -exact "\r
+Re-enter new password: "
+send -- "password\r"
+expect -exact "\r
+Enter keystore password:  "
+send -- "password\r"
+expect -exact "\r
+Certificate stored in file <selfsignedcert.cer>\r
+Enter keystore password:  "
+send -- "password\r"
+expect -exact "\r
+Re-enter new password: "
+send -- "password\r"
+sleep 1
+send -- "yes\r"
+expect eof