- make sure an already "owned" connection isn't returned unless
multiplexed.
- clear ->data when returning the connection to the cache again
Regression since 7.62.0 (probably in commit 1b76c38904)
Bug: https://curl.haxx.se/mail/lib-2019-03/0064.htmlCloses#3686
AmiSSL is an Amiga native library which provides a wrapper over OpenSSL.
It also requires all programs using it to use bsdsocket.library
directly, rather than accessing socket functions through clib, which
libcurl was not necessarily doing previously. Configure will now check
for the headers and ensure they are included if found.
Closes#3677
* Adjusted unit tests 2056, 2057
* do not generally close connections with CURLAUTH_NEGOTIATE after every request
* moved negotiatedata from UrlState to connectdata
* Added stream rewind logic for CURLAUTH_NEGOTIATE
* introduced negotiatedata::GSS_AUTHDONE and negotiatedata::GSS_AUTHSUCC
* Consider authproblem state for CURLAUTH_NEGOTIATE
* Consider reuse_forbid for CURLAUTH_NEGOTIATE
* moved and adjusted negotiate authentication state handling from
output_auth_headers into Curl_output_negotiate
* Curl_output_negotiate: ensure auth done is always set
* Curl_output_negotiate: Set auth done also if result code is
GSS_S_CONTINUE_NEEDED/SEC_I_CONTINUE_NEEDED as this result code may
also indicate the last challenge request (only works with disabled
Expect: 100-continue and CURLOPT_KEEP_SENDING_ON_ERROR -> 1)
* Consider "Persistent-Auth" header, detect if not present;
Reset/Cleanup negotiate after authentication if no persistent
authentication
* apply changes introduced with #2546 for negotiate rewind logic
Fixes#1261Closes#1975
The check that prevents payload from sending in case of authentication
doesn't check properly if the authentication is done or not.
They're cases where the proxy respond "200 OK" before sending
authentication challenge. This change takes care of that.
Fixes#2431Closes#3669
Coverity warned for two potentional "Use after free" cases. Both are false
positives because the memory wasn't used, it was only the actual pointer
value that was logged.
The fix still changes the order of execution to avoid the warnings.
Coverity CID 1443033 and 1443034
Closes#3671
This code was once used for the non multi-interface using code path, but
ever since easy_perform was turned into a wrapper around the multi
interface, this code path never runs.
Closes#3666
- Inherit SSL options for the doh handle but not SSL client certs,
SSL ALPN/NPN, SSL engine, SSL version, SSL issuer cert,
SSL pinned public key, SSL ciphers, SSL id cache setting,
SSL kerberos or SSL gss-api settings.
- Fix inheritance of verbose setting.
- Inherit NOSIGNAL.
There is no way for the user to set options for the doh (DNS-over-HTTPS)
handles and instead we inherit some options from the user's easy handle.
My thinking for the SSL options not inherited is they are most likely
not intended by the user for the DOH transfer. I did inherit insecure
because I think that should still be in control of the user.
Prior to this change doh did not work for me because CAINFO was not
inherited. Also verbose was set always which AFAICT was a bug (#3660).
Fixes https://github.com/curl/curl/issues/3660
Closes https://github.com/curl/curl/pull/3661
Since it can't be NULL and it makes Coverity believe we lack proper NULL
checks. Verified by test 659, landed in commit 15401fa886.
Pointed out by Coverity CID 1442746.
Assisted-by: Dan Fandrich
Fixes#3617Closes#3642
If the state machine isn't complete, didn't fail and it didn't return
due to blocking it can just as well loop again.
This addresses the problem with SFTP directory listings where we would
otherwise return back to the parent and as the multi state machine
doesn't have any code for using CURLM_CALL_MULTI_PERFORM for as long the
doing phase isn't complete, it would return out when in reality there
was more data to deal with.
Fixes#3506Closes#3644
- Change closure handle to receive verbose setting from the easy handle
most recently added via curl_multi_add_handle.
The closure handle is a special easy handle used for closing cached
connections. It receives limited settings from the easy handle most
recently added to the multi handle. Prior to this change that did not
include verbose which was a problem because on connection shutdown
verbose mode was not acknowledged.
Ref: https://github.com/curl/curl/pull/3598
Co-authored-by: Daniel Stenberg
Closes https://github.com/curl/curl/pull/3618
- no need to have them protocol specific
- no need to set pointers to them with the Curl_setup_transfer() call
- make Curl_setup_transfer() operate on a transfer pointer, not
connection
- switch some counters from long to the more proper curl_off_t type
Closes#3627
When a transfer is done, the resolver thread will be brought down. That
could accidentally generate an error message in the error buffer even
though this is not an error situationand the transfer would still return
OK. An application that still reads the error buffer could find a
"Could not resolve host: [host name]" message there and get confused.
Reported-by: Michael Schmid
Fixes#3629Closes#3630
Without it set, we would unwillingly triger the "HTTP error before end
of send, stop sending" condition even if the entire POST body had been
sent (since it wouldn't know the expected size) which would
unnecessarily log that message and close the connection when it didn't
have to.
Reported-by: Matt McClure
Bug: https://curl.haxx.se/mail/archive-2019-02/0023.htmlCloses#3624
Follow-up to 8eddb8f425.
If the cookieinfo pointer is NULL there really is nothing to save.
Without this fix, we got a problem when a handle was using shared object
with cookies and is told to "FLUSH" it to file (which worked) and then
the share object was removed and when the easy handle was closed just
afterwards it has no cookieinfo and no cookies so it decided to save an
empty jar (overwriting the file just flushed).
Test 1905 now verifies that this works.
Assisted-by: Michael Wallner
Assisted-by: Marcel Raad
Closes#3621
This allows the compiler to pack and align the structs better in
memory. For a rather feature-complete build on x86_64 Linux, gcc 8.1.2
makes the Curl_easy struct 4.9% smaller. From 6312 bytes to 6000.
Removed an unused struct field.
No functionality changes.
Closes#3610
Instead of using a fixed 256 byte buffer in the connectdata struct.
In my build, this reduces the size of the connectdata struct by 11.8%,
from 2160 to 1904 bytes with no functionality or performance loss.
This also fixes a bug in schannel's Curl_verify_certificate where it
called Curl_sspi_strerror when it should have called Curl_strerror for
string from GetLastError. the only effect would have been no text or the
wrong text being shown for the error.
Co-authored-by: Jay Satiro
Closes#3612
Add support for Ephemeral elliptic curve Diffie-Hellman key exchange
algorithm option when selecting ciphers. This became available on the
Win10 SDK.
Closes https://github.com/curl/curl/pull/3608
Failing to do so would make the CURLINFO_TOTAL_TIME timeout to not get
updated correctly and could end up getting reported to the application
completely wrong (way too small).
Reported-by: accountantM on github
Fixes#3602Closes#3605
- Split off connection shutdown procedure from Curl_disconnect into new
function conn_shutdown.
- Change the shutdown procedure to close the sockets before
disassociating the transfer.
Prior to this change the sockets were closed after disassociating the
transfer so SOCKETFUNCTION wasn't called since the transfer was already
disassociated. That likely came about from recent work started in
Jan 2019 (#3442) to separate transfers from connections.
Bug: https://curl.haxx.se/mail/lib-2019-02/0101.html
Reported-by: Pavel Löbl
Closes https://github.com/curl/curl/issues/3597
Closes https://github.com/curl/curl/pull/3598
RFC 7540 says we should verify that the push is for an "authoritative"
server. We make sure of this by only allowing push with an :athority
header that matches the host that was asked for in the URL.
Fixes#3577
Reported-by: Nicolas Grekas
Bug: https://curl.haxx.se/mail/lib-2019-02/0057.htmlCloses#3581
The variable wasn't properly reset within the loop and thus could remain
set for sockets that hadn't been set before and miss notifying the app.
This is a follow-up to 4c35574 (shipped in curl 7.64.0)
Reported-by: buzo-ffm on github
Detected-by: Jan Alexander Steffens
Fixes#3585Closes#3589
- rename 'n' to buflen in functions, and use size_t for them. Don't pass
in negative buffer lengths.
- move most function comments to above the function starts like we use
to
- remove several unnecessary typecasts (especially of NULL)
Reviewed-by: Patrick Monnerat
Closes#3582
Previously the function would edit the provided header in-place when a
semicolon is used to signify an empty header. This made it impossible to
use the same set of custom headers in multiple threads simultaneously.
This approach now makes a local copy when it needs to edit the string.
Reported-by: d912e3 on github
Fixes#3578Closes#3579
- Change the behavior of win32_init so that the required initialization
procedures are not affected by CURL_GLOBAL_WIN32 flag.
libcurl via curl_global_init supports initializing for win32 with an
optional flag CURL_GLOBAL_WIN32, which if omitted was meant to stop
Winsock initialization. It did so internally by skipping win32_init()
when that flag was set. Since then win32_init() has been expanded to
include required initialization routines that are separate from
Winsock and therefore must be called in all cases. This commit fixes
it so that CURL_GLOBAL_WIN32 only controls the optional win32
initialization (which is Winsock initialization, according to our doc).
The only users affected by this change are those that don't pass
CURL_GLOBAL_WIN32 to curl_global_init. For them this commit removes the
risk of a potential crash.
Ref: https://github.com/curl/curl/pull/3573
Fixes https://github.com/curl/curl/issues/3313
Closes https://github.com/curl/curl/pull/3575
The draft-ietf-httpbis-rfc6265bis-02 draft, specify a set of prefixes
and how they should affect cookie initialization, which has been
adopted by the major browsers. This adds support for the two prefixes
defined, __Host- and __Secure, and updates the testcase with the
supplied examples from the draft.
Closes#3554
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
If mbedtls_ssl_get_session() fails, it may still have allocated
memory that needs to be freed to avoid leaking. Call the library
API function to release session resources on this errorpath as
well as on Curl_ssl_addsessionid() errors.
Closes: #3574
Reported-by: Michał Antoniak <M.Antoniak@posnet.com>
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
... and avoid use of static variables that aren't thread safe.
Fixes regression from e9ababd4f5 (present in the 7.64.0 release)
Reported-by: Paul Groke
Fixes#3572Closes#3573
- Save the original conn->data before it's changed to the specified
data transfer for the connection check and then restore it afterwards.
This is a follow-up to 38d8e1b 2019-02-11.
History:
It was discovered a month ago that before checking whether to extract a
dead connection that that connection should be associated with a "live"
transfer for the check (ie original conn->data ignored and set to the
passed in data). A fix was landed in 54b201b which did that and also
cleared conn->data after the check. The original conn->data was not
restored, so presumably it was thought that a valid conn->data was no
longer needed.
Several days later it was discovered that a valid conn->data was needed
after the check and follow-up fix was landed in bbae24c which partially
reverted the original fix and attempted to limit the scope of when
conn->data was changed to only when pruning dead connections. In that
case conn->data was not cleared and the original conn->data not
restored.
A month later it was discovered that the original fix was somewhat
correct; a "live" transfer is needed for the check in all cases
because original conn->data could be null which could cause a bad deref
at arbitrary points in the check. A fix was landed in 38d8e1b which
expanded the scope to all cases. conn->data was not cleared and the
original conn->data not restored.
A day later it was discovered that not restoring the original conn->data
may lead to busy loops in applications that use the event interface, and
given this observation it's a pretty safe assumption that there is some
code path that still needs the original conn->data. This commit is the
follow-up fix for that, it restores the original conn->data after the
connection check.
Assisted-by: tholin@users.noreply.github.com
Reported-by: tholin@users.noreply.github.com
Fixes https://github.com/curl/curl/issues/3542Closes#3559
On non-ascii platforms, the chunked hex header was measured for char code
conversion length, even for chunked trailers that do not have an hex header.
In addition, the efective length is already known: use it.
Since the hex length can be zero, only convert if needed.
Reported by valgrind.
Convert numerous infof() calls into debug-build only messages since they
are annoyingly verbose for regular applications. Removed a few.
Bug: https://curl.haxx.se/mail/lib-2019-02/0027.html
Reported-by: Volker Schmid
Closes#3552
There is no benefit to holding the data sharelock when freeing the
addrinfo in case it fails, so ensure releaseing it as soon as we can
rather than holding on to it. This also aligns the code with other
consumers of sharelocks.
Closes#3516
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
The http2 code for connection checking needs a transfer to use. Make
sure a working one is set before handler->connection_check() is called.
Reported-by: jnbr on github
Fixes#3541Closes#3547
urlapi: turn three local-only functions into statics
conncache: make conncache_find_first_connection static
multi: make detach_connnection static
connect: make getaddressinfo static
curl_ntlm_core: make hmac_md5 static
http2: make two functions static
http: make http_setup_conn static
connect: make tcpnodelay static
tests: make UNITTEST a thing to mark functions with, so they can be static for
normal builds and non-static for unit test builds
... and mark Curl_shuffle_addr accordingly.
url: make up_free static
setopt: make vsetopt static
curl_endian: make write32_le static
rtsp: make rtsp_connisdead static
warnless: remove unused functions
memdebug: remove one unused function, made another static
If the incoming len 5, but the buffer does not have a termination
after 5 bytes, the strtol() call may keep reading through the line
buffer until is exceeds its boundary. Fix by ensuring that we are
using a bounded read with a temporary buffer on the stack.
Bug: https://curl.haxx.se/docs/CVE-2019-3823.html
Reported-by: Brian Carpenter (Geeknik Labs)
CVE-2019-3823
Attempt to add support for Secure Channel binding when negotiate
authentication is used. The problem to solve is that by default IIS
accepts channel binding and curl doesn't utilise them. The result was a
401 response. Scope affects only the Schannel(winssl)-SSPI combination.
Fixes https://github.com/curl/curl/issues/3503
Closes https://github.com/curl/curl/pull/3509
Stick to "Schannel" everywhere. The configure option --with-winssl is
kept to allow existing builds to work but --with-schannel is added as an
alias.
Closes#3504
mbedTLS doesn't have a sigpipe management. If a write/read occurs when
the remote closes the socket, the signal is raised and kills the
application. Use the curl mecanisms fix this behavior.
Signed-off-by: Jeremie Rapin <j.rapin@overkiz.com>
Closes#3502
Compiling with msvc /analyze and a recent Windows SDK warns against
using GetTickCount (Suggests to use GetTickCount64 instead.)
Since GetTickCount is only being used when GetTickCount64 isn't
available, I am disabling that warning.
Fixes https://github.com/curl/curl/issues/3437
Closes https://github.com/curl/curl/pull/3440
CURLOPT_SSH_KNOWNHOSTS and CURLOPT_SSH_KEYFUNCTION are supported for
libssh as well. So accepting these options only when compiling with
libssh2 is wrong here.
Fixes#3493Closes#3494
By default, libssh creates a new socket, instead of using the socket
created by curl for SSH connections.
Pass the socket created by curl to libssh using ssh_options_set() with
SSH_OPTIONS_FD directly after ssh_new(). So libssh uses our socket
instead of creating a new one.
This approach is very similar to what is done in the libssh2 code, where
the socket created by curl is passed to libssh2 when
libssh2_session_startup() is called.
Fixes#3491Closes#3495
There is no real gain in performing memcmp() comparisons on single
characters, so change these to array subscript inspections which
saves a call and makes the code clearer.
Closes#3486
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Reviewed-by: Jay Satiro <raysatiro@yahoo.com>
Windows extended potection (aka ssl channel binding) is required
to login to ntlm IIS endpoint, otherwise the server returns 401
responses.
Fixes#3280Closes#3321
When a ssh session startup fails, it is useful to know why it has
failed. This commit changes the message from:
"Failure establishing ssh session"
to something like this, for example:
"Failure establishing ssh session: -5, Unable to exchange encryption keys"
Closes#3481
.... to not pass in a const in the second argument as that's not how it
is supposed to be used and might cause compiler warnings.
Reported-by: Pavel Pavlov
Fixes#3477Closes#3478
extract_if_dead() dead is called from two functions, and only one of
them should get conn->data updated and now neither call path clears it.
scan-build found a case where conn->data would be NULL dereferenced in
ConnectionExists() otherwise.
Closes#3473
Make sure that this function sets a proper "live" transfer for the
connection before calling the protocol-specific connection check
function, and then clear it again afterward as a non-used connection has
no current transfer.
Reported-by: Jeroen Ooms
Reviewed-by: Marcel Raad
Reviewed-by: Daniel Gustafsson
Fixes#3463Closes#3464
We use "conn" everywhere to be a pointer to the connection.
Introduces two functions that "attaches" and "detaches" the connection
to and from the transfer.
Going forward, we should favour using "data->conn" (since a transfer
always only has a single connection or none at all) to "conn->data"
(since a connection can have none, one or many transfers associated with
it and updating conn->data to be correct is error prone and a frequent
reason for internal issues).
Closes#3442
Fixes#3436Closes#3448
Problem 1
After LOTS of scratching my head, I eventually realized that even when doing
10 uploads in parallel, sometimes the socket callback to the application that
tells it what to wait for on the socket, looked like it would reflect the
status of just the single transfer that just changed state.
Digging into the code revealed that this was indeed the truth. When multiple
transfers are using the same connection, the application did not correctly get
the *combined* flags for all transfers which then could make it switch to READ
(only) when in fact most transfers wanted to get told when the socket was
WRITEABLE.
Problem 1b
A separate but related regression had also been introduced by me when I
cleared connection/transfer association better a while ago, as now the logic
couldn't find the connection and see if that was marked as used by more
transfers and then it would also prematurely remove the socket from the socket
hash table even in times other transfers were still using it!
Fix 1
Make sure that each socket stored in the socket hash has a "combined" action
field of what to ask the application to wait for, that is potentially the ORed
action of multiple parallel transfers. And remove that socket hash entry only
if there are no transfers left using it.
Problem 2
The socket hash entry stored an association to a single transfer using that
socket - and when curl_multi_socket_action() was called to tell libcurl about
activities on that specific socket only that transfer was "handled".
This was WRONG, as a single socket/connection can be used by numerous parallel
transfers and not necessarily a single one.
Fix 2
We now store a list of handles in the socket hashtable entry and when libcurl
is told there's traffic for a particular socket, it now iterates over all
known transfers using that single socket.
Added Curl_resolver_kill() for all three resolver modes, which only
blocks when necessary, along with test 1592 to confirm
curl_multi_remove_handle() doesn't block unless it must.
Closes#3428Fixes#3371
When building with Unicode on MSVC, the compiler warns about freeing a
pointer to const in Curl_unicodefree. Fix this by declaring it as
non-const and casting the argument to Curl_convert_UTF8_to_tchar to
non-const too, like we do in all other places.
Closes https://github.com/curl/curl/pull/3435
The previous fix for parsing IPv6 URLs with a zone index was a paddle
short for URLs without an explicit port. This patch fixes that case
and adds a unit test case.
This bug was highlighted by issue #3408, and while it's not the full
fix for the problem there it is an isolated bug that should be fixed
regardless.
Closes#3411
Reported-by: GitYuanQu on github
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
This adds support for wildcard hosts in CURLOPT_RESOLVE. These are
try-last so any non-wildcard entry is resolved first. If specified,
any host not matched by another CURLOPT_RESOLVE config will use this
as fallback.
Example send a.com to 10.0.0.1 and everything else to 10.0.0.2:
curl --resolve *:443:10.0.0.2 --resolve a.com:443:10.0.0.1 \
https://a.comhttps://b.com
This is probably quite similar to using:
--connect-to a.com:443:10.0.0.1:443 --connect-to :443:10.0.0.2:443
Closes#3406
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
- Use QueryPerformanceCounter on Windows Vista+
There is confusing info floating around that QueryPerformanceCounter
can leap etc, which might have been true long time ago, but no longer
the case nowadays (perhaps starting from WinXP?). Also, boost and
std::chrono::steady_clock use QueryPerformanceCounter in a similar way.
Prior to this change GetTickCount or GetTickCount64 was used, which has
lower resolution. That is still the case for <= XP.
Fixes https://github.com/curl/curl/issues/3309
Closes https://github.com/curl/curl/pull/3318
Do not assume/store assocation between a given easy handle and the
connection if it can be avoided.
Long-term, the 'conn->data' pointer should probably be removed as it is a
little too error-prone. Still used very widely though.
Reported-by: masbug on github
Fixes#3391Closes#3400
Added CURLOPT_HTTP09_ALLOWED and --http0.9 for this purpose.
For now, both the tool and library allow HTTP/0.9 by default.
docs/DEPRECATE.md lays out the plan for when to reverse that default: 6
months after the 7.64.0 release. The options are added already now so
that applications/scripts can start using them already now.
Fixes#2873Closes#3383
This adds a cleanup callback for cyassl. Resolves possible memory leak
when using ECC fixed point cache.
Closes#3395
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Ensure to perform the checks we have to enforce a sane domain in
the cookie request. The check for non-PSL enabled builds is quite
basic but it's better than nothing.
Closes#2964
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Follow-up to 09e401e01b. If connection gets reused, then data member
will be copied, but not the proto member. As a result, in smb_do(),
path has been set from the original proto.share data.
Closes#3388
The timeout set with CURLOPT_TIMEOUT is no longer used when
disconnecting from one of the pingpong protocols (FTP, IMAP, SMTP,
POP3).
Reported-by: jasal82 on github
Fixes#3264Closes#3374
This adds the CURLOPT_TRAILERDATA and CURLOPT_TRAILERFUNCTION
options that allow a callback based approach to sending trailing headers
with chunked transfers.
The test server (sws) was updated to take into account the detection of the
end of transfer in the case of trailing headers presence.
Test 1591 checks that trailing headers can be sent using libcurl.
Closes#3350
After the migration to URL API all octets in the selector after the
first `?' were interpreted as query and accidentally discarded and not
passed to the server.
Add a gopherpath to always concatenate possible path and query URL
pieces.
Fixes#3369Closes#3370
If just a `?' to indicate the query is passed always store a zero length
query instead of having a NULL query.
This permits to distinguish URL with trailing `?'.
Fixes#3369Closes#3370
Only allow secure origins to be able to write cookies with the
'secure' flag set. This reduces the risk of non-secure origins
to influence the state of secure origins. This implements IETF
Internet-Draft draft-ietf-httpbis-cookie-alone-01 which updates
RFC6265.
Closes#2956
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
A URL with a single colon without a portnumber should use the default
port, discarding the colon. Fix, add a testcase and also do little bit
of comment wordsmithing.
Closes#3365
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
... when not actually following the redirect. Otherwise we return error
for this and an application can't extract the value.
Test 1518 added to verify.
Reported-by: Pavel Pavlov
Fixes#3340Closes#3364
The time_t type is unsigned on some systems and these variables are used
to hold return values from functions that return timediff_t
already. timediff_t is always a signed type.
Closes#3363
This adds a new unittest intended to cover the internal functions in
the urlapi code, starting with parse_port(). In order to avoid name
collisions in debug builds, parse_port() is renamed Curl_parse_port()
since it will be exported.
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Reviewed-by: Marcel Raad <Marcel.Raad@teamviewer.com>
An IPv6 URL which contains a zone index includes a '%%25<zode id>'
string before the ending ']' bracket. The parsing logic wasn't set
up to cope with the zone index however, resulting in a malformed url
error being returned. Fix by breaking the parsing into two stages
to correctly handle the zone index.
Closes#3355Closes#3319
Reported-by: tonystz on Github
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Reviewed-by: Marcel Raad <Marcel.Raad@teamviewer.com>
- Include query in the path passed to generate HTTP auth.
Recent changes to use the URL API internally (46e1640, 7.62.0)
inadvertently broke authentication URIs by omitting the query.
Fixes https://github.com/curl/curl/issues/3353Closes#3356
The http status code 204 (No Content) should not change the "condition
unmet" flag. Only the http status code 304 (Not Modified) should do
this.
Closes#359
- Match URL scheme with LDAP and LDAPS
- Retrieve attributes, scope and filter from URL query instead
Regression brought in 46e164069d (7.62.0)
Closes#3362
All resources defined in lib/libcurl.rc and curl.rc are language
neutral.
winbuild/MakefileBuild.vc ALWAYS defines the macro DEBUGBUILD, so the
ifdef's in line 33 of lib/libcurl.rc and src/curl.rc are wrong.
Replace the hard-coded constants in both *.rc files with #define'd
values.
Thumbs-uped-by: Rod Widdowson, Johannes Schindelin
URL: https://curl.haxx.se/mail/lib-2018-11/0000.htmlCloses#3348
This is a companion patch to cbea2fd2c (NTLM: force the connection to
HTTP/1.1, 2018-12-06): with NTLM, we can switch to HTTP/1.1
preemptively. However, with other (Negotiate) authentication it is not
clear to this developer whether there is a way to make it work with
HTTP/2, so let's try HTTP/2 first and fall back in case we encounter the
error HTTP_1_1_REQUIRED.
Note: we will still keep the NTLM workaround, as it avoids an extra
round trip.
Daniel Stenberg helped a lot with this patch, in particular by
suggesting to introduce the Curl_h2_http_1_1_error() function.
Closes#3349
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
It is allowed to call that function with id set to -1, specifying the
backend by the name instead. We should imitate what is done further down
in that function to allow for that.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Closes#3346
NSS may be built without support for the latest SSL/TLS versions,
leading to "SSL version range is not valid" errors when the library
code supports a recent version (e.g. TLS v1.3) but it has explicitly
been disabled.
This change adjusts the maximum SSL version requested by libcurl to
be the maximum supported version at runtime, as long as that version
is at least as high as the minimum version required by libcurl.
Fixes#3261
Forgetting to bump the year in the copyright clause when hacking has
been quite common among curl developers, but a traditional checksrc
check isn't a good fit as it would penalize anyone hacking on January
1st (among other things). This adds a more selective COPYRIGHTYEAR
check which intends to only cover the currently hacked on changeset.
The check for updated copyright year is currently not enforced on all
files but only on files edited and/or committed locally. This is due to
the amount of files which aren't updated with their correct copyright
year at the time of their respective commit.
To further avoid running this expensive check for every developer, it
adds a new local override mode for checksrc where a .checksrc file can
be used to turn on extended warnings locally.
Closes#3303
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
EBADIOCTL doesn't exist on more recent Minix.
There have also been substantial changes to the network stack.
Fixes build on Minix 3.4rc
Closes https://github.com/curl/curl/pull/3323
curl_multi_wait() was erroneously used from within
curl_easy_perform(). It could lead to it believing there was no socket
to wait for and then instead sleep for a while instead of monitoring the
socket and then miss acting on that activity as swiftly as it should
(causing an up to 1000 ms delay).
Reported-by: Antoni Villalonga
Fixes#3305Closes#3306Closes#3308
Important for when the file is going to be read again and thus must not
contain old contents!
Adds test 327 to verify.
Reported-by: daboul on github
Fixes#3299Closes#3300
The function does not return the same value as snprintf() normally does,
so readers may be mislead into thinking the code works differently than
it actually does. A different function name makes this easier to detect.
Reported-by: Tomas Hoger
Assisted-by: Daniel Gustafsson
Fixes#3296Closes#3297
Session resumption information is not available immediately after a TLS 1.3
handshake. The client must wait until the server has sent a session ticket.
Use OpenSSL's "new session" callback to get the session information and put it
into curl's session cache. For TLS 1.3 sessions, this callback will be invoked
after the server has sent a session ticket.
The "new session" callback is invoked only if OpenSSL's session cache is
enabled, so enable it and use the "external storage" mode which lets curl manage
the contents of the session cache.
A pointer to the connection data and the sockindex are now saved as "SSL extra
data" to make them available to the callback.
This approach also works for old SSL/TLS versions and old OpenSSL versions.
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Fixes#3202Closes#3271
Since we're close to feature freeze, this change disables this feature
with an #ifdef. Define ALLOW_RENEG at build-time to enable.
This could be converted to a bit for CURLOPT_SSL_OPTIONS to let
applications opt-in this.
Concern-raised-by: David Benjamin
Fixes#3283Closes#3293
When using c-ares for asyn dns, the dns socket fd was silently closed
by c-ares without curl being aware. curl would then 'realize' the fd
has been removed at next call of Curl_resolver_getsock, and only then
notify the CURLMOPT_SOCKETFUNCTION to remove fd from its poll set with
CURL_POLL_REMOVE. At this point the fd is already closed.
By using ares socket state callback (ARES_OPT_SOCK_STATE_CB), this
patch allows curl to be notified that the fd is not longer needed
for neither for write nor read. At this point by calling
Curl_multi_closed we are able to notify multi with CURL_POLL_REMOVE
before the fd is actually closed by ares.
In asyn-ares.c Curl_resolver_duphandle we can't use ares_dup anymore
since it does not allow passing a different sock_state_cb_data
Closes#3238
lib/curl_ntlm.c had code that read as follows:
#ifdef USE_OPENSSL
# ifdef USE_OPENSSL
# else
# ..
# endif
#endif
Remove the redundant USE_OPENSSL along with #else (it's not possible to
reach it anyway). The removed construction is a leftover from when the
SSLeay support was removed.
Closes#3269
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Commit 709cf76f6b deprecated USE_SSLEAY, as curl since long isn't
compatible with the SSLeay library. This removes the few leftovers that
were omitted in the less frequently used platform targets.
Closes#3270
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
The SSL_CTX_set_msg_callback callback is not just called for the
Handshake or Alert protocols, but also for the raw record header
(SSL3_RT_HEADER) and the decrypted inner record type
(SSL3_RT_INNER_CONTENT_TYPE). Be sure to ignore the latter to avoid
excess debug spam when using `curl -v` against a TLSv1.3-enabled server:
* TLSv1.3 (IN), TLS app data, [no content] (0):
(Following this message, another callback for the decrypted
handshake/alert messages will be be present anyway.)
Closes https://github.com/curl/curl/pull/3281
The productname from Microsoft is "Schannel", but in infof/failf
reporting we use "schannel". This removes different versions.
Closes#3243
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
APPENDQUERY + URLENCODE would skip all equals signs but now it only skip
encoding the first to better allow "name=content" for any content.
Reported-by: Alexey Melnichuk
Fixes#3231Closes#3231
The function identifying a leading "scheme" part of the URL considered a
few letters ending with a colon to be a scheme, making something like
"short:80" to become an unknown scheme instead of a short host name and
a port number.
Extended test 1560 to verify.
Also fixed test203 to use file_pwd to make it get the correct path on
windows. Removed test 2070 since it was a duplicate of 203.
Assisted-by: Marcel Raad
Reported-by: Hagai Auro
Fixes#3220Fixes#3233Closes#3223Closes#3235
Prior to this change twice as many bytes as necessary were malloc'd when
converting wchar to UTF8. To allay confusion in the future I also
changed the variable name for the amount of bytes from len to bytes.
Closes https://github.com/curl/curl/pull/3209
- for "--netrc", don't ignore the login/password specified with "--user",
only ignore the login/password in the URL.
This restores the netrc behaviour of curl 7.61.1 and earlier.
- fix the documentation of CURL_NETRC_REQUIRED
- improve the detection of login/password changes when reading .netrc
- don't read .netrc if both login and password are already set
Fixes#3213Closes#3224
The internal buffer in infof() is limited to 2048 bytes of payload plus
an additional byte for NULL termination. Servers with very long error
messages can however cause truncation of the string, which currently
isn't very clear, and leads to badly formatted output.
This appends a "...\n" (or just "..." in case the format didn't with a
newline char) marker to the end of the string to clearly show
that it has been truncated.
Also include a unittest covering infof() to try and catch any bugs
introduced in this quite important function.
Closes#3216
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Reviewed-by: Marcel Raad <Marcel.Raad@teamviewer.com>
The function identifying a leading "scheme" part of the URL considered a few
letters ending with a colon to be a scheme, making something like "short:80"
to become an unknown scheme instead of a short host name and a port number.
Extended test 1560 to verify.
Reported-by: Hagai Auro
Fixes#3220Closes#3223
The overflow has no real world impact.
Just avoid it for "best practice".
Code change suggested by "The Infinnovation Team" and Daniel Stenberg.
Closes#3184
When not actually following the redirect and the target URL is only
stored for later retrieval, curl always accepted "non-supported"
schemes. This was a regression from 46e164069d.
Reported-by: Brad King
Fixes#3210Closes#3215
As has been outlined in the DEPRECATE.md document, the axTLS code has
been disabled for 6 months and is hereby removed.
Use a better supported TLS library!
Assisted-by: Daniel Gustafsson
Closes#3194
Curl_verify_certificate() must use the Curl_ prefix since it is globally
available in the lib and otherwise steps outside of our namespace!
Closes#3201
MesaLink support was added in commit 57348eb97d but the
backend was never added to the curl_sslbackend enum in curl/curl.h.
This adds the new backend to the enum and updates the relevant docs.
Closes#3195
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
