... and assign it from the set.fread_func_set pointer in the
Curl_init_CONNECT function. This A) avoids that we have code that
assigns fields in the 'set' struct (which we always knew was bad) and
more importantly B) it makes it impossibly to accidentally leave the
wrong value for when the handle is re-used etc.
Introducing a state-init functionality in multi.c, so that we can set a
specific function to get called when we enter a state. The
Curl_init_CONNECT is thus called when switching to the CONNECT state.
Bug: https://github.com/bagder/curl/issues/346Closes#346
- Add new option CURLOPT_DEFAULT_PROTOCOL to allow specifying a default
protocol for schemeless URLs.
- Add new tool option --proto-default to expose
CURLOPT_DEFAULT_PROTOCOL.
In the case of schemeless URLs libcurl will behave in this way:
When the option is used libcurl will use the supplied default.
When the option is not used, libcurl will follow its usual plan of
guessing from the hostname and falling back to 'http'.
Currently, libcurl rejects responses with "Content-Encoding: compress"
when CURLOPT_ACCEPT_ENCODING is set to "". I think that libcurl should
treat the Content-Encoding "compress" the same as other
Content-Encodings that it does not support, e.g. "bzip2". That means
just ignoring it.
New tool option --ssl-no-revoke.
New value CURLSSLOPT_NO_REVOKE for CURLOPT_SSL_OPTIONS.
Currently this option applies only to WinSSL where we have automatic
certificate revocation checking by default. According to the
ssl-compared chart there are other backends that have automatic checking
(NSS, wolfSSL and DarwinSSL) so we could possibly accommodate them at
some later point.
Bug: https://github.com/bagder/curl/issues/264
Reported-by: zenden2k <zenden2k@gmail.com>
This commit is several drafts squashed together. The changes from each
draft are noted below. If any changes are similar and possibly
contradictory the change in the latest draft takes precedence.
Bug: https://github.com/bagder/curl/issues/244
Reported-by: Chris Araman
%%
%% Draft 1
%%
- return 0 if len == 0. that will have to be documented.
- continue on and process the caches regardless of raw recv
- if decrypted data will be returned then set the error code to CURLE_OK
and return its count
- if decrypted data will not be returned and the connection has closed
(eg nread == 0) then return 0 and CURLE_OK
- if decrypted data will not be returned and the connection *hasn't*
closed then set the error code to CURLE_AGAIN --only if an error code
isn't already set-- and return -1
- narrow the Win2k workaround to only Win2k
%%
%% Draft 2
%%
- Trying out a change in flow to handle corner cases.
%%
%% Draft 3
%%
- Back out the lazier decryption change made in draft2.
%%
%% Draft 4
%%
- Some formatting and branching changes
- Decrypt all encrypted cached data when len == 0
- Save connection closed state
- Change special Win2k check to use connection closed state
%%
%% Draft 5
%%
- Default to CURLE_AGAIN in cleanup if an error code wasn't set and the
connection isn't closed.
%%
%% Draft 6
%%
- Save the last error only if it is an unrecoverable error.
Prior to this I saved the last error state in all cases; unfortunately
the logic to cover that in all cases would lead to some muddle and I'm
concerned that could then lead to a bug in the future so I've replaced
it by only recording an unrecoverable error and that state will persist.
- Do not recurse on renegotiation.
Instead we'll continue on to process any trailing encrypted data
received during the renegotiation only.
- Move the err checks in cleanup after the check for decrypted data.
In either case decrypted data is always returned but I think it's easier
to understand when those err checks come after the decrypted data check.
%%
%% Draft 7
%%
- Regardless of len value go directly to cleanup if there is an
unrecoverable error or a close_notify was already received. Prior to
this change we only acknowledged those two states if len != 0.
- Fix a bug in connection closed behavior: Set the error state in the
cleanup, because we don't know for sure it's an error until that time.
- (Related to above) In the case the connection is closed go "greedy"
with the decryption to make sure all remaining encrypted data has been
decrypted even if it is not needed at that time by the caller. This is
necessary because we can only tell if the connection closed gracefully
(close_notify) once all encrypted data has been decrypted.
- Do not renegotiate when an unrecoverable error is pending.
%%
%% Draft 8
%%
- Don't show 'server closed the connection' info message twice.
- Show an info message if server closed abruptly (missing close_notify).
With many easy handles using the same connection for multiplexing, it is
important we store and keep the transfer-oriented stuff in the
SessionHandle so that callbacks and callback data work fine even when
many easy handles share the same physical connection.
SSLeay was the name of the library that was subsequently turned into
OpenSSL many moons ago (1999). curl does not work with the old SSLeay
library since years. This is now reflected by only using USE_OPENSSL in
code that depends on OpenSSL.
This option can be used to enable/disable certificate status verification using
the "Certificate Status Request" TLS extension defined in RFC6066 section 8.
This also adds the CURLE_SSL_INVALIDCERTSTATUS error, to be used when the
certificate status verification fails, and the Curl_ssl_cert_status_request()
function, used to check whether the SSL backend supports the status_request
extension.
There was a confusion between these: this commit tries to disambiguate them.
- Scope can be computed from the address itself.
- Scope id is scope dependent: it is currently defined as 1-based local
interface index for link-local scoped addresses, and as a site index(?) for
(obsolete) site-local addresses. Linux only supports it for link-local
addresses.
The URL parser properly parses a scope id as an interface index, but stores it
in a field named "scope": confusion. The field has been renamed into "scope_id".
Curl_if2ip() used the scope id as it was a scope. This caused failures
to bind to an interface.
Scope is now computed from the addresses and Curl_if2ip() matches them.
If redundantly specified in the URL, scope id is check for mismatch with
the interface index.
This commit should fix SF bug #1451.
The ability to do HTTP requests over a UNIX domain socket has been
requested before, in Apr 2008 [0][1] and Sep 2010 [2]. While a
discussion happened, no patch seems to get through. I decided to give it
a go since I need to test a nginx HTTP server which listens on a UNIX
domain socket.
One patch [3] seems to make it possible to use the
CURLOPT_OPENSOCKETFUNCTION function to gain a UNIX domain socket.
Another person wrote a Go program which can do HTTP over a UNIX socket
for Docker[4] which uses a special URL scheme (though the name contains
cURL, it has no relation to the cURL library).
This patch considers support for UNIX domain sockets at the same level
as HTTP proxies / IPv6, it acts as an intermediate socket provider and
not as a separate protocol. Since this feature affects network
operations, a new feature flag was added ("unix-sockets") with a
corresponding CURL_VERSION_UNIX_SOCKETS macro.
A new CURLOPT_UNIX_SOCKET_PATH option is added and documented. This
option enables UNIX domain sockets support for all requests on the
handle (replacing IP sockets and skipping proxies).
A new configure option (--enable-unix-sockets) and CMake option
(ENABLE_UNIX_SOCKETS) can disable this optional feature. Note that I
deliberately did not mark this feature as advanced, this is a
feature/component that should easily be available.
[0]: http://curl.haxx.se/mail/lib-2008-04/0279.html
[1]: http://daniel.haxx.se/blog/2008/04/14/http-over-unix-domain-sockets/
[2]: http://sourceforge.net/p/curl/feature-requests/53/
[3]: http://curl.haxx.se/mail/lib-2008-04/0361.html
[4]: https://github.com/Soulou/curl-unix-socket
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Reworked the input token (challenge message) storage as what is passed
to the buf and desc in the response generation are typically blobs of
data rather than strings, so this is more in keeping with other areas
of the SSPI code, such as the NTLM message functions.
When duplicating a handle, the data to post was duplicated using
strdup() when it could be binary and contain zeroes and it was not even
zero terminated! This caused read out of bounds crashes/segfaults.
Since the lib/strdup.c file no longer is easily shared with the curl
tool with this change, it now uses its own version instead.
Bug: http://curl.haxx.se/docs/adv_20141105.html
CVE: CVE-2014-3707
Reported-By: Symeon Paraschoudis
Typically the USE_WINDOWS_SSPI definition would not be used when the
CURL_DISABLE_CRYPTO_AUTH define is, however, it is still a valid build
configuration and, as such, the SASL Kerberos V5 (GSSAPI) authentication
data structures and functions would incorrectly be used when they
shouldn't be.
Introduced a new USE_KRB5 definition that takes into account the use of
CURL_DISABLE_CRYPTO_AUTH like USE_SPNEGO and USE_NTLM do.
Option --pinnedpubkey takes a path to a public key in DER format and
only connect if it matches (currently only implemented with OpenSSL).
Provides CURLOPT_PINNEDPUBLICKEY for curl_easy_setopt().
Extract a public RSA key from a website like so:
openssl s_client -connect google.com:443 2>&1 < /dev/null | \
sed -n '/-----BEGIN/,/-----END/p' | openssl x509 -noout -pubkey \
| openssl rsa -pubin -outform DER > google.com.der
