schannel: schannel_recv overhaul

This commit is several drafts squashed together. The changes from each
draft are noted below. If any changes are similar and possibly
contradictory the change in the latest draft takes precedence.

Bug: https://github.com/bagder/curl/issues/244
Reported-by: Chris Araman

%%
%% Draft 1
%%
- return 0 if len == 0. that will have to be documented.
- continue on and process the caches regardless of raw recv
- if decrypted data will be returned then set the error code to CURLE_OK
and return its count
- if decrypted data will not be returned and the connection has closed
(eg nread == 0) then return 0 and CURLE_OK
- if decrypted data will not be returned and the connection *hasn't*
closed then set the error code to CURLE_AGAIN --only if an error code
isn't already set-- and return -1
- narrow the Win2k workaround to only Win2k

%%
%% Draft 2
%%
- Trying out a change in flow to handle corner cases.

%%
%% Draft 3
%%
- Back out the lazier decryption change made in draft2.

%%
%% Draft 4
%%
- Some formatting and branching changes
- Decrypt all encrypted cached data when len == 0
- Save connection closed state
- Change special Win2k check to use connection closed state

%%
%% Draft 5
%%
- Default to CURLE_AGAIN in cleanup if an error code wasn't set and the
connection isn't closed.

%%
%% Draft 6
%%
- Save the last error only if it is an unrecoverable error.

Prior to this I saved the last error state in all cases; unfortunately
the logic to cover that in all cases would lead to some muddle and I'm
concerned that could then lead to a bug in the future so I've replaced
it by only recording an unrecoverable error and that state will persist.

- Do not recurse on renegotiation.

Instead we'll continue on to process any trailing encrypted data
received during the renegotiation only.

- Move the err checks in cleanup after the check for decrypted data.

In either case decrypted data is always returned but I think it's easier
to understand when those err checks come after the decrypted data check.

%%
%% Draft 7
%%
- Regardless of len value go directly to cleanup if there is an
unrecoverable error or a close_notify was already received. Prior to
this change we only acknowledged those two states if len != 0.

- Fix a bug in connection closed behavior: Set the error state in the
cleanup, because we don't know for sure it's an error until that time.

- (Related to above) In the case the connection is closed go "greedy"
with the decryption to make sure all remaining encrypted data has been
decrypted even if it is not needed at that time by the caller. This is
necessary because we can only tell if the connection closed gracefully
(close_notify) once all encrypted data has been decrypted.

- Do not renegotiate when an unrecoverable error is pending.

%%
%% Draft 8
%%
- Don't show 'server closed the connection' info message twice.

- Show an info message if server closed abruptly (missing close_notify).
This commit is contained in:
Jay Satiro 2015-06-17 00:17:03 -04:00
parent 28f4fc5272
commit 3e7ec1e849
3 changed files with 187 additions and 87 deletions

View File

@ -322,6 +322,9 @@ struct ssl_connect_data {
size_t encdata_offset, decdata_offset;
unsigned char *encdata_buffer, *decdata_buffer;
unsigned long req_flags, ret_flags;
CURLcode recv_unrecoverable_err; /* schannel_recv had an unrecoverable err */
bool recv_sspi_close_notify; /* true if connection closed by close_notify */
bool recv_connection_closed; /* true if connection closed, regardless how */
#endif /* USE_SCHANNEL */
#ifdef USE_DARWINSSL
SSLContextRef ssl_ctx;

View File

@ -268,6 +268,10 @@ schannel_connect_step1(struct connectdata *conn, int sockindex)
infof(data, "schannel: sent initial handshake data: "
"sent %zd bytes\n", written);
connssl->recv_unrecoverable_err = CURLE_OK;
connssl->recv_sspi_close_notify = false;
connssl->recv_connection_closed = false;
/* continue to second handshake step */
connssl->connecting_state = ssl_connect_2;
@ -300,6 +304,17 @@ schannel_connect_step2(struct connectdata *conn, int sockindex)
if(!connssl->cred || !connssl->ctxt)
return CURLE_SSL_CONNECT_ERROR;
/* buffer to store previously received and decrypted data */
if(connssl->decdata_buffer == NULL) {
connssl->decdata_offset = 0;
connssl->decdata_length = CURL_SCHANNEL_BUFFER_INIT_SIZE;
connssl->decdata_buffer = malloc(connssl->decdata_length);
if(connssl->decdata_buffer == NULL) {
failf(data, "schannel: unable to allocate memory");
return CURLE_OUT_OF_MEMORY;
}
}
/* buffer to store previously received and encrypted data */
if(connssl->encdata_buffer == NULL) {
connssl->encdata_offset = 0;
@ -834,8 +849,7 @@ schannel_recv(struct connectdata *conn, int sockindex,
char *buf, size_t len, CURLcode *err)
{
size_t size = 0;
ssize_t nread = 0;
CURLcode result;
ssize_t nread = -1;
struct SessionHandle *data = conn->data;
struct ssl_connect_data *connssl = &conn->ssl[sockindex];
unsigned char *reallocated_buffer;
@ -844,72 +858,103 @@ schannel_recv(struct connectdata *conn, int sockindex,
SecBuffer inbuf[4];
SecBufferDesc inbuf_desc;
SECURITY_STATUS sspi_status = SEC_E_OK;
/* we want the length of the encrypted buffer to be at least large enough
that it can hold all the bytes requested and some TLS record overhead. */
size_t min_encdata_length = len + CURL_SCHANNEL_BUFFER_FREE_SIZE;
/****************************************************************************
* Don't return or set connssl->recv_unrecoverable_err unless in the cleanup.
* The pattern for return error is set *err, optional infof, goto cleanup.
*
* Our priority is to always return as much decrypted data to the caller as
* possible, even if an error occurs. The state of the decrypted buffer must
* always be valid. Transfer of decrypted data to the caller's buffer is
* handled in the cleanup.
*/
infof(data, "schannel: client wants to read %zu bytes\n", len);
*err = CURLE_OK;
/* buffer to store previously received and decrypted data */
if(connssl->decdata_buffer == NULL) {
connssl->decdata_offset = 0;
connssl->decdata_length = CURL_SCHANNEL_BUFFER_INIT_SIZE;
connssl->decdata_buffer = malloc(connssl->decdata_length);
if(connssl->decdata_buffer == NULL) {
failf(data, "schannel: unable to allocate memory");
*err = CURLE_OUT_OF_MEMORY;
return -1;
}
if(len && len <= connssl->decdata_offset) {
infof(data, "schannel: enough decrypted data is already available\n");
goto cleanup;
}
else if(connssl->recv_unrecoverable_err) {
*err = connssl->recv_unrecoverable_err;
infof(data, "schannel: an unrecoverable error occurred in a prior call\n");
goto cleanup;
}
else if(connssl->recv_sspi_close_notify) {
/* once a server has indicated shutdown there is no more encrypted data */
infof(data, "schannel: server indicated shutdown in a prior call\n");
goto cleanup;
}
else if(!len) {
/* It's debatable what to return when !len. Regardless we can't return
immediately because there may be data to decrypt (in the case we want to
decrypt all encrypted cached data) so handle !len later in cleanup.
*/
; /* do nothing */
}
else if(!connssl->recv_connection_closed) {
/* increase enc buffer in order to fit the requested amount of data */
size = connssl->encdata_length - connssl->encdata_offset;
if(size < CURL_SCHANNEL_BUFFER_FREE_SIZE ||
connssl->encdata_length < min_encdata_length) {
reallocated_length = connssl->encdata_offset +
CURL_SCHANNEL_BUFFER_FREE_SIZE;
if(reallocated_length < min_encdata_length) {
reallocated_length = min_encdata_length;
}
reallocated_buffer = realloc(connssl->encdata_buffer,
reallocated_length);
if(reallocated_buffer == NULL) {
*err = CURLE_OUT_OF_MEMORY;
failf(data, "schannel: unable to re-allocate memory");
goto cleanup;
}
/* increase buffer in order to fit the requested amount of data */
if(connssl->encdata_length - connssl->encdata_offset <
CURL_SCHANNEL_BUFFER_FREE_SIZE || connssl->encdata_length < len) {
/* increase internal encrypted data buffer */
reallocated_length = connssl->encdata_offset +
CURL_SCHANNEL_BUFFER_FREE_SIZE;
/* make sure that the requested amount of data fits */
if(reallocated_length < len) {
reallocated_length = len;
}
reallocated_buffer = realloc(connssl->encdata_buffer,
reallocated_length);
if(reallocated_buffer == NULL) {
failf(data, "schannel: unable to re-allocate memory");
*err = CURLE_OUT_OF_MEMORY;
return -1;
}
else {
connssl->encdata_buffer = reallocated_buffer;
connssl->encdata_length = reallocated_length;
size = connssl->encdata_length - connssl->encdata_offset;
infof(data, "schannel: encdata_buffer resized %zu\n",
connssl->encdata_length);
}
}
/* read encrypted data from socket */
infof(data, "schannel: encrypted data buffer: offset %zu length %zu\n",
connssl->encdata_offset, connssl->encdata_length);
size = connssl->encdata_length - connssl->encdata_offset;
if(size > 0) {
infof(data, "schannel: encrypted data buffer: offset %zu length %zu\n",
connssl->encdata_offset, connssl->encdata_length);
/* read encrypted data from socket */
*err = Curl_read_plain(conn->sock[sockindex],
(char *) (connssl->encdata_buffer +
connssl->encdata_offset),
(char *)(connssl->encdata_buffer +
connssl->encdata_offset),
size, &nread);
/* check for received data */
if(*err != CURLE_OK) {
return -1;
if(*err) {
nread = -1;
if(*err == CURLE_AGAIN)
infof(data, "schannel: Curl_read_plain returned CURLE_AGAIN\n");
else if(*err == CURLE_RECV_ERROR)
infof(data, "schannel: Curl_read_plain returned CURLE_RECV_ERROR\n");
else
infof(data, "schannel: Curl_read_plain returned error %d\n", *err);
}
else if(nread == 0) {
connssl->recv_connection_closed = true;
infof(data, "schannel: server closed the connection\n");
}
else if(nread > 0) {
/* increase encrypted data buffer offset */
connssl->encdata_offset += nread;
connssl->encdata_offset += (size_t)nread;
infof(data, "schannel: encrypted data got %zd\n", nread);
}
infof(data, "schannel: encrypted data got %zd\n", nread);
}
infof(data, "schannel: encrypted data buffer: offset %zu length %zu\n",
connssl->encdata_offset, connssl->encdata_length);
/* check if we still have some data in our buffers */
/* decrypt loop */
while(connssl->encdata_offset > 0 && sspi_status == SEC_E_OK &&
connssl->decdata_offset < len) {
(!len || connssl->decdata_offset < len ||
connssl->recv_connection_closed)) {
/* prepare data buffer for DecryptMessage call */
InitSecBuffer(&inbuf[0], SECBUFFER_DATA, connssl->encdata_buffer,
curlx_uztoul(connssl->encdata_offset));
@ -924,13 +969,6 @@ schannel_recv(struct connectdata *conn, int sockindex,
sspi_status = s_pSecFn->DecryptMessage(&connssl->ctxt->ctxt_handle,
&inbuf_desc, 0, NULL);
/* check if we need more data */
if(sspi_status == SEC_E_INCOMPLETE_MESSAGE) {
infof(data, "schannel: failed to decrypt data, need more data\n");
*err = CURLE_AGAIN;
return -1;
}
/* check if everything went fine (server may want to renegotiate
or shutdown the connection context) */
if(sspi_status == SEC_E_OK || sspi_status == SEC_I_RENEGOTIATE ||
@ -943,7 +981,7 @@ schannel_recv(struct connectdata *conn, int sockindex,
/* increase buffer in order to fit the received amount of data */
size = inbuf[1].cbBuffer > CURL_SCHANNEL_BUFFER_FREE_SIZE ?
inbuf[1].cbBuffer : CURL_SCHANNEL_BUFFER_FREE_SIZE;
inbuf[1].cbBuffer : CURL_SCHANNEL_BUFFER_FREE_SIZE;
if(connssl->decdata_length - connssl->decdata_offset < size ||
connssl->decdata_length < len) {
/* increase internal decrypted data buffer */
@ -954,21 +992,18 @@ schannel_recv(struct connectdata *conn, int sockindex,
}
reallocated_buffer = realloc(connssl->decdata_buffer,
reallocated_length);
if(reallocated_buffer == NULL) {
failf(data, "schannel: unable to re-allocate memory");
*err = CURLE_OUT_OF_MEMORY;
return -1;
}
else {
connssl->decdata_buffer = reallocated_buffer;
connssl->decdata_length = reallocated_length;
failf(data, "schannel: unable to re-allocate memory");
goto cleanup;
}
connssl->decdata_buffer = reallocated_buffer;
connssl->decdata_length = reallocated_length;
}
/* copy decrypted data to internal buffer */
size = inbuf[1].cbBuffer;
if(size > 0) {
if(size) {
memcpy(connssl->decdata_buffer + connssl->decdata_offset,
inbuf[1].pvBuffer, size);
connssl->decdata_offset += size;
@ -1007,56 +1042,117 @@ schannel_recv(struct connectdata *conn, int sockindex,
/* check if server wants to renegotiate the connection context */
if(sspi_status == SEC_I_RENEGOTIATE) {
infof(data, "schannel: remote party requests renegotiation\n");
if(*err && *err != CURLE_AGAIN) {
infof(data, "schannel: can't renogotiate, an error is pending\n");
goto cleanup;
}
if(connssl->encdata_offset) {
*err = CURLE_RECV_ERROR;
infof(data, "schannel: can't renogotiate, "
"encrypted data available\n");
goto cleanup;
}
/* begin renegotiation */
infof(data, "schannel: renegotiating SSL/TLS connection\n");
connssl->state = ssl_connection_negotiating;
connssl->connecting_state = ssl_connect_2_writing;
result = schannel_connect_common(conn, sockindex, FALSE, &done);
if(result)
*err = result;
else {
infof(data, "schannel: SSL/TLS connection renegotiated\n");
/* now retry receiving data */
return schannel_recv(conn, sockindex, buf, len, err);
*err = schannel_connect_common(conn, sockindex, FALSE, &done);
if(*err) {
infof(data, "schannel: renegotiation failed\n");
goto cleanup;
}
/* now retry receiving data */
sspi_status = SEC_E_OK;
infof(data, "schannel: SSL/TLS connection renegotiated\n");
continue;
}
/* check if the server closed the connection */
else if(sspi_status == SEC_I_CONTEXT_EXPIRED) {
/* In Windows 2000 SEC_I_CONTEXT_EXPIRED (close_notify) is not
returned so we have to work around that in cleanup. */
connssl->recv_sspi_close_notify = true;
if(!connssl->recv_connection_closed) {
connssl->recv_connection_closed = true;
infof(data, "schannel: server closed the connection\n");
}
goto cleanup;
}
}
else if(sspi_status == SEC_E_INCOMPLETE_MESSAGE) {
if(!*err)
*err = CURLE_AGAIN;
infof(data, "schannel: failed to decrypt data, need more data\n");
goto cleanup;
}
else {
/* something went wrong and we need to return an error */
*err = CURLE_RECV_ERROR;
infof(data, "schannel: failed to read data from server: %s\n",
Curl_sspi_strerror(conn, sspi_status));
*err = CURLE_RECV_ERROR;
return -1;
goto cleanup;
}
}
infof(data, "schannel: encrypted data buffer: offset %zu length %zu\n",
connssl->encdata_offset, connssl->encdata_length);
infof(data, "schannel: decrypted data buffer: offset %zu length %zu\n",
connssl->decdata_offset, connssl->decdata_length);
/* copy requested decrypted data to supplied buffer */
size = len < connssl->decdata_offset ? len : connssl->decdata_offset;
if(size > 0) {
memcpy(buf, connssl->decdata_buffer, size);
cleanup:
/* Warning- there is no guarantee the encdata state is valid at this point */
infof(data, "schannel: schannel_recv cleanup\n");
/* move remaining decrypted data forward to the beginning of buffer */
/* Error if the connection has closed without a close_notify.
Behavior here is a matter of debate. We don't want to be vulnerable to a
truncation attack however there's some browser precedent for ignoring the
close_notify for compatibility reasons.
Additionally, Windows 2000 (v5.0) is a special case since it seems it doesn't
return close_notify. In that case if the connection was closed we assume it
was graceful (close_notify) since there doesn't seem to be a way to tell.
*/
if(len && !connssl->decdata_offset && connssl->recv_connection_closed &&
!connssl->recv_sspi_close_notify) {
DWORD winver_full, winver_major, winver_minor;
winver_full = GetVersion();
winver_major = (DWORD)(LOBYTE(LOWORD(winver_full)));
winver_minor = (DWORD)(HIBYTE(LOWORD(winver_full)));
if(winver_major == 5 && winver_minor == 0 && sspi_status == SEC_E_OK)
connssl->recv_sspi_close_notify = true;
else {
*err = CURLE_RECV_ERROR;
infof(data, "schannel: server closed abruptly (missing close_notify)\n");
}
}
/* Any error other than CURLE_AGAIN is an unrecoverable error. */
if(*err && *err != CURLE_AGAIN)
connssl->recv_unrecoverable_err = *err;
size = len < connssl->decdata_offset ? len : connssl->decdata_offset;
if(size) {
memcpy(buf, connssl->decdata_buffer, size);
memmove(connssl->decdata_buffer, connssl->decdata_buffer + size,
connssl->decdata_offset - size);
connssl->decdata_offset -= size;
infof(data, "schannel: decrypted data returned %zd\n", size);
infof(data, "schannel: decrypted data returned %zu\n", size);
infof(data, "schannel: decrypted data buffer: offset %zu length %zu\n",
connssl->decdata_offset, connssl->decdata_length);
}
/* check if the server closed the connection, */
/* including special check for Windows 2000 Professional */
else if(sspi_status == SEC_I_CONTEXT_EXPIRED || (sspi_status == SEC_E_OK &&
connssl->encdata_offset && connssl->encdata_buffer[0] == 0x15)) {
infof(data, "schannel: server closed the connection\n");
*err = CURLE_OK;
return (ssize_t)size;
}
return size;
if(!*err && !connssl->recv_connection_closed)
*err = CURLE_AGAIN;
/* It's debatable what to return when !len. We could return whatever error we
got from decryption but instead we override here so the return is consistent.
*/
if(!len)
*err = CURLE_OK;
return *err ? -1 : 0;
}
CURLcode

View File

@ -72,6 +72,7 @@
#define SECBUFFER_ALERT 17
#endif
/* Both schannel buffer sizes must be > 0 */
#define CURL_SCHANNEL_BUFFER_INIT_SIZE 4096
#define CURL_SCHANNEL_BUFFER_FREE_SIZE 1024