of streams that had some parts (legitimately) missing. We now provide and use
a proper cleanup function for the content encoding submodule.
http://curl.haxx.se/mail/lib-2009-05/0092.html
as reported by Ebenezer Ikonne (on curl-users) and Laurent Rabret (on
curl-library). The transfer was mistakenly marked to get more data to send
but since it didn't actually have that, it just hung there...
KEEP_RECV to better match the general terminology: receive and send is what we
do from the (remote) servers. We read and write from and to the local fs.
(http://curl.haxx.se/bug/view.cgi?id=2784055) identifying a problem to
connect to SOCKS proxies when using the multi interface. It turned out to
almost not work at all previously. We need to wait for the TCP connect to
be properly verified before doing the SOCKS magic.
There's still a flaw in the FTP code for this.
(http://curl.haxx.se/bug/view.cgi?id=2786255) with a patch, identifying how
libcurl did not deal with SSL session ids properly if the server rejected a
re-use of one. Starting now, it will forget the rejected one and remember
the new. This change was for OpenSSL only, it is likely that other SSL lib
code needs similar fixes.
I've now made TFTP "connections" not being kept for re-use within libcurl.
TFTP is UDP-based so the benefit was really low (if even existing) to begin
with so instead of tracking down to fix this problem we instead removed the
re-use. I also enabled test case 1099 that I wrote a few days ago to verify
that this change fixes the reported problem.
Chen pointed out how curl couldn't upload with resume when reading from a
pipe.
This ended up with the introduction of a new return code for the
CURLOPT_SEEKFUNCTION callback that basically says that the seek failed but
that libcurl may try to resolve the situation anyway. In our case this means
libcurl will attempt to instead read that much data from the stream instead
of seeking and that way curl can now upload with resume when data is read
from a stream!
Previous workaround proved useful, but triggered the following warning:
warning #556: a value of type "volatile Curl_addrinfo *" cannot be assigned to an entity of type "Curl_addrinfo *"
Previous 'volatile' variables workaround proved useful, but it triggered the following warning:
warning #167: argument of type "volatile Curl_addrinfo *" is incompatible with parameter of type "void *"
how it occurs (http://curl.haxx.se/mail/lib-2009-04/0289.html). The
conclusion was that if an error is detected and Curl_done() is called for
the connection, ftp_done() could at times return another error code that
then would take precedence and that new code confused existing logic that
works for the first error code (CURLE_SEND_ERROR) only.
proxy. libcurl would then wrongly close the connection after each
request. In his case it had the weird side-effect that it killed NTLM auth
for the proxy causing an inifinite loop!
I added test case 1098 to verify this fix. The test case does however not
properly verify that the transfers are done persistently - as I couldn't
think of a clever way to achieve it right now - but you need to read the
stderr output after a test run to see that it truly did the right thing.
Storsjo pointed out how setting CURLOPT_NOBODY to 0 could be downright
confusing as it set the method to either GET or HEAD. The example he showed
looked like:
curl_easy_setopt(curl, CURLOPT_PUT, 1);
curl_easy_setopt(curl, CURLOPT_NOBODY, 0);
The new way doesn't alter the method until the request is about to start. If
CURLOPT_NOBODY is then 1 the HTTP request will be HEAD. If CURLOPT_NOBODY is
0 and the request happens to have been set to HEAD, it will then instead be
set to GET. I believe this will be less surprising to users, and hopefully
not hit any existing users badly.
out to be leaking cacerts. Kamil Dudka helped me complete the fix. The issue
is found in Redhat's bug tracker:
https://bugzilla.redhat.com/show_bug.cgi?id=453612
There are still memory leaks present, but they seem to have other reasons.
curl_easy_duphandle did not necessarily duplicate the CURLOPT_COOKIEFILE
option. It only enabled the cookie engine in the destination handle if
data->cookies is not NULL (where data is the source handle). In case of a
newly initialized handle which just had the cookie support enabled by a
curl_easy_setopt(handle, CURL_COOKIEFILE, "")-call, handle->cookies was
still NULL because the setopt-call only appends the value to
data->change.cookielist, hence duplicating this handle would not have the
cookie engine switched on.
We also concluded that the slist-functionality would be suitable for being
put in its own module rather than simply hanging out in lib/sendf.c so I
created lib/slist.[ch] for them.
in the gnutls code where we were checking for negative values for errors,
when the man pages state that GNUTLS_E_SUCCESS is returned on success and
other values indicate error conditions.
(http://curl.haxx.se/docs/adv_20090303.html also known as CVE-2009-0037) in
which previous libcurl versions (by design) can be tricked to access an
arbitrary local/different file instead of a remote one when
CURLOPT_FOLLOWLOCATION is enabled. This flaw is now fixed in this release
together this the addition of two new setopt options for controlling this
new behavior:
o CURLOPT_REDIR_PROTOCOLS controls what protocols libcurl is allowed to
follow to when CURLOPT_FOLLOWLOCATION is enabled. By default, this option
excludes the FILE and SCP protocols and thus you nee to explicitly allow
them in your app if you really want that behavior.
o CURLOPT_PROTOCOLS controls what protocol(s) libcurl is allowed to fetch
using the primary URL option. This is useful if you want to allow a user or
other outsiders control what URL to pass to libcurl and yet not allow all
protocols libcurl may have been built to support.
curl_global_init() function to properly maintain the performing functions
thread-safe. We've previously (28 April 2007) moved the init to a later time
just to avoid it to fail very early when libgcrypt dislikes the situation,
but that move was bad and the fix should rather be in libgcrypt or
elsewhere.
CURLINFO_CONTENT_LENGTH_DOWNLOAD and CURLINFO_CONTENT_LENGTH_UPLOAD return
-1 if the sizes aren't know. Previously these returned 0, make it impossible
to detect the difference between actually zero and unknown.
FTP with the multi interface: when a transfer fails, like when aborted by a
write callback, the control connection was wrongly closed and thus not
re-used properly.
This change is also an attempt to cleanup the code somewhat in this area, as
now the FTP code attempts to keep (better) track on pending responses
necessary to get read in ftp_done().
libcurl did a superfluous 1000ms wait when doing SFTP downloads!
We read data with libssh2 while doing the "DO" operation for SFTP and then
when we were about to start getting data for the actual file part, the
"TRANSFER" part, we waited for socket action (in 1000ms) before doing a
libssh2-read. But in this case libssh2 had already read and buffered the
data so we ended up always just waiting 1000ms before we get working on the
data!
plain FTP connections, and it will then allow MKD to fail once and retry the
CWD afterwards. This is especially useful if you're doing many simultanoes
connections against the same server and they all have this option enabled,
as then CWD may first fail but then another connection does MKD before this
connection and thus MKD fails but trying CWD works! The numbers can
(should?) now be set with the convenience enums now called
CURLFTP_CREATE_DIR and CURLFTP_CREATE_DIR_RETRY.
Tests has proven that if you're making an application that uploads a set of
files to an ftp server, you will get a noticable gain in speed if you're
using multiple connections and this option will be then be very useful.
the condition in the previous request was unmet. This is typically a time
condition set with CURLOPT_TIMECONDITION and was previously not possible to
reliably figure out. From bug report #2565128
(http://curl.haxx.se/bug/view.cgi?id=2565128)
interface and setting CURLMOPT_MAXCONNECTS to something less than the number
of handles you add to the multi handle. All the connections that didn't fit
in the cache would not be properly disconnected nor freed!
version 1.1 instead of 1.0 like before. This change also introduces the new
proxy type for libcurl called 'CURLPROXY_HTTP_1_0' that then allows apps to
switch (back) to CONNECT 1.0 requests. The curl tool also got a --proxy1.0
option that works exactly like --proxy but sets CURLPROXY_HTTP_1_0.
I updated all test cases cases that use CONNECT and I tried to do some using
--proxy1.0 and some updated to do CONNECT 1.1 to get both versions run.
enabled, we can now take advantage of its brand new AF_UNSPEC support in
ares_gethostbyname(). This makes test case 241 finally run fine for me wtih
this setup since it now parses the "::1 ip6-localhost" line fine in my
/etc/hosts file!
Curl_sspi_global_init() and Curl_sspi_global_cleanup() which previously were
named Curl_ntlm_global_init() and Curl_ntlm_global_cleanup() in http_ntlm.c
Also adjusted socks_sspi.c to remove the link-time dependency on the Windows
SSPI library using it now in the same way as it was done in http_ntlm.c.
CURLOPT_SOCKS5_GSSAPI_SERVICE and CURLOPT_SOCKS5_GSSAPI_NEC to allow libcurl
to do GSS-style authentication with SOCKS5 proxies. The curl tool got the
options called --socks5-gssapi-service and --socks5-gssapi-nec to enable
these.
disable "rfc4507bis session ticket support". rfc4507bis was later turned
into the proper RFC5077 it seems: http://tools.ietf.org/html/rfc5077
The enabled extension concerns the session management. I wonder how often
libcurl stops a connection and then resumes a TLS session. also, sending the
session data is some overhead. .I suggest that you just use your proposed
patch (which explicitly disables TICKET).
If someone writes an application with libcurl and openssl who wants to
enable the feature, one can do this in the SSL callback.
Sharad Gupta brought this to my attention. Peter Sylvester helped me decide
on the proper action.
(http://curl.haxx.se/bug/view.cgi?id=2535504) pointing out that realms with
quoted quotation marks in HTTP Digest headers didn't work. I've now added
test case 1095 that verifies my fix.
They basically offer the same thing the NO_PROXY environment variable only
offered previously: list a set of host names that shall not use the proxy
even if one is specified.
clarity. This does fix one problem that causes ;type=i FTP URLs
to fail in the Turkish locale when CURLOPT_PROXY_TRANSFER_MODE is
used (test case 561)
Added tests 561 and 1092 through 1094 to test various combinations
of ;type= and ;mode= URLs that could potentially fail in the Turkish
locale.
When using the multi interface over HTTP and the server returns a Location
header, the running easy handle will get stuck in the CURLM_STATE_PERFORM
state, leaving the external event loop stuck waiting for data from the
ingoing socket (when using the curl_multi_socket_action stuff). While this
bug was pretty hard to find, it seems to require only a one-line fix. The
break statement on line 1374 in multi.c caused the function to skip the call
to multistate().
How to reproduce this bug? Well, that's another question. evhiperfifo.c in
the examples directory chokes on this bug only _sometimes_, probably
depending on how fast the URLs are added. One way of testing the bug out is
writing to hiper.fifo from more than one source at the same time.
curl_easy_reset() by creating Curl_init_userdefined(). This had the side effect
of fixing curl_easy_reset() so it now also resets CURLOPT_FTP_FILEMETHOD and
CURLOPT_SSL_SESSIONID_CACHE
I have to jump through a few hoops now with the NSS library initialization
since another part of an application may have already initialized NSS by the
time Curl gets invoked. This patch is more careful to only shutdown the NSS
library if Curl did the initialization.
It also adds in a bit of code to set the default ciphers if the app that
call NSS_Init* did not call NSS_SetDomesticPolicy() or set specific
ciphers. One might argue that this lets other application developers get
lazy and/or they aren't using the NSS API correctly, and you'd be right.
But still, this will avoid terribly difficult-to-trace crashes and is
generally helpful.
(http://curl.haxx.se/bug/view.cgi?id=2413067) that identified a problem that
would cause libcurl to mark a DNS cache entry "in use" eternally if the
subsequence TCP connect failed. It would thus never get pruned and refreshed
as it should've been.
pipelining, as libcurl could then easily get confused and A) work on the
handle that was not "first in queue" on a pipeline, or even B) tell the app
to REMOVE a socket while it was in use by a second handle in a pipeline. Both
errors caused hanging or stalling applications.
was actually ready to get done, as the internal time resolution is higher
than the returned millisecond timer. Therefore it could cause applications
running on fast processors to do short bursts of busy-loops.
curl_multi_timeout() will now only return 0 if the timeout is actually
alreay triggered.
now has an improved ability to do right when the multi interface (both
"regular" and multi_socket) is used for SCP and SFTP transfers. This should
result in (much) less busy-loop situations and thus less CPU usage with no
speed loss.
operation didn't complete properly if the EAGAIN equivalent was returned but
libcurl would simply continue with a half-completed close operation
performed. This ruined persistent connection re-use and cause some
SSH-protocol errors in general. The correction is unfortunately adding a
blocking function - doing it entirely non-blocking should be considered for
a better fix.
If USE_WATT32=1 one needs to use stack-based calls (-3s).
So to keep the makefile nice and clean, specify -3s for
Winsock target too (there's hardly any speed-gain using -3r).
removing easy handles from multi handles when the easy handle is/was within
a HTTP pipeline. His bug report #2351653
(http://curl.haxx.se/bug/view.cgi?id=2351653) was also related and was
eventually fixed by a patch by Igor himself.
duphandle+curl_mutli" (http://curl.haxx.se/bug/view.cgi?id=2416182) showed
that curl_easy_duphandle() wrongly also copied the pointer to the connection
cache, which was plain wrong and caused a segfault if the handle would be
used in a different multi handle than the handle it was duplicated from.
_ Adjust OS400 make script for non-CVS distributions.
_ Upgrade ILE/RPG binding.
_ Define CURL_HIDDEN_SYMBOLS on OS400, since only CURL_EXTERN-marked symbols are exported.
there are servers "out there" that relies on the client doing this broken
Digest authentication. Apache even comes with an option to work with such
broken clients.
The difference is only for URLs that contain a query-part (a '?'-letter and
text to the right of it).
libcurl now supports this quirk, and you enable it by setting the
CURLAUTH_DIGEST_IE bit in the bitmask you pass to the CURLOPT_HTTPAUTH or
CURLOPT_PROXYAUTH options. They are thus individually controlled to server
and proxy.
particular state for the control connection like it did before for implicit
FTPS (libcurl assumed such control connections to be encrypted while some
FTPS servers such as FileZilla assumes such connections to be clear
mode). Use the CURLOPT_USE_SSL option to set your desired level.
researching it, it turned out he got a 550 response back from a SIZE command
and then I fell over the text in RFC3659 that says:
The presence of the 550 error response to a SIZE command MUST NOT be taken
by the client as an indication that the file cannot be transferred in the
current MODE and TYPE.
In other words: the change I did on September 30th 2008 and that has been
included in the last two releases were a regression and a bad idea. We MUST
NOT take a 550 response from SIZE as a hint that the file doesn't exist.
(http://curl.haxx.se/bug/view.cgi?id=2221237) that identified an infinite
loop during GSS authentication given some specific conditions. With his
patience and great feedback I managed to narrow down the problem and
eventually fix it although I can't test any of this myself!
(http://curl.haxx.se/bug/view.cgi?id=2351645) that identified a problem with
the multi interface that occured if you removed an easy handle while in
progress and the handle was used in a HTTP pipeline.
function when built to support SCP and SFTP that helps the library to know
in which direction a particular libssh2 operation would return EAGAIN so
that libcurl knows what socket conditions to wait for before trying the
function call again. Previously (and still when using libssh2 0.18 or
earlier), libcurl will busy-loop in this situation when the easy interface
is used!
when uploading files to a single FTP server using multiple easy handle
handles with the multi interface. Occasionally a handle would stall in
mysterious ways.
The problem turned out to be a side-effect of the ConnectionExists()
function's eagerness to re-use a handle for HTTP pipelining so it would
select it even if already being in use, due to an inadequate check for its
chances of being used for pipelnining.
codes for all calls to malloc and strdup that were missing. I also changed
a few malloc(13) to use arrays on the stack and a few malloc(PATH_MAX) to
instead use aprintf() to lower memory use.
I also fixed a memory leak in Curl_nss_connect() when CURLOPT_ISSUERCERT is
in use.
(http://curl.haxx.se/bug/view.cgi?id=2255627) which pointed out that a
program using libcurl's multi interface to download a HTTPS page with a
libcurl built powered by OpenSSL, would easily get silly and instead hand
over SSL details as data instead of the actual HTTP headers and body. This
happened because libcurl would consider the connection handshake done too
early. This problem was introduced at September 22nd 2008 with my fix of the
bug #2107377
The correct fix is now instead done within the GnuTLS-handling code, as both
the OpenSSL and the NSS code already deal with this situation in similar
fashion. I added test case 560 in an attempt to verify this fix, but
unfortunately it didn't trigger it even before this fix!
problem with my CURLINFO_PRIMARY_IP fix from October 7th that caused a NULL
pointer read. I also took the opportunity to clean up this logic (storing of
the connection's IP address) somewhat as we had it stored in two different
places and ways previously and they are now unified.
Changed checkprefix() to use it and those instances of strnequal() that
compare host names or other protocol strings that are defined to be
independent of case in the C locale. This should fix a few more
Turkish locale problems.
make CURLOPT_PROXYUSERPWD sort of deprecated. The primary motive for adding
these new options is that they have no problems with the colon separator
that the CURLOPT_PROXYUSERPWD option does.
are consecutive and with a 0x20 "distance" to the uppercase letter), since we do
support EBCDIC as well. Thus I replaced the macro with a (larger) switch case.
I better change the function name...
(http://curl.haxx.se/bug/view.cgi?id=2154627) which pointed out that libcurl
uses strcasecmp() in multiple places where it causes failures when the
Turkish locale is used. This is because 'i' and 'I' isn't the same letter so
strcasecmp() on those letters are different in Turkish than in English (or
just about all other languages). I thus introduced a totally new internal
function in libcurl (called Curl_ascii_equal) for doing case insentive
comparisons for english-(ascii?) style strings that thus will make "file"
and "FILE" match even if the Turkish locale is selected.
(http://curl.haxx.se/bug/view.cgi?id=2155496) pointing out an error case
without a proper human-readable error message. When a read callback returns
a too large value (like when trying to return a negative number) it would
trigger and the generic error message then makes the proplem slightly
different to track down. I've added an error message for this now.
because the struct is declared on the stack and not all members are used so
we could just as well make struct with only struct members we actually need.
systems supporting getifaddrs(). Also fixed a problem where an IPv6
address could be chosen instead of an IPv4 one for --interface when it
involved a name lookup.
fixed a CURLINFO_REDIRECT_URL memory leak and an additional wrong-doing:
Any subsequent transfer with a redirect leaks memory, eventually crashing
the process potentially.
Any subsequent transfer WITHOUT a redirect causes the most recent redirect
that DID occur on some previous transfer to still be reported.
eventually identified a flaw in how the multi_socket interface in some cases
missed to call the timeout callback when easy interfaces are removed and
added within the same millisecond.
curl_easy_setopt: CURLOPT_USERNAME and CURLOPT_PASSWORD that sort of
deprecates the good old CURLOPT_USERPWD since they allow applications to set
the user name and password independently and perhaps more importantly allow
both to contain colon(s) which CURLOPT_USERPWD doesn't fully support.
a fresh connection to be made in such cases and the request retransmitted.
This should fix test case 160. Added test case 1079 in an attempt to
test a similar connection dropping scenario, but as a race condition, it's
hard to test reliably.
the app re-used the handle to do a connection to host B and then again
re-used the handle to host A, it would not update the info with host A's IP
address (due to the connection being re-used) but it would instead report
the info from host B.
gets a 550 response back for the cases where a download (or NOBODY) is
wanted. It still allows a 550 as response if the SIZE is used as part of an
upload process (like if resuming an upload is requested and the file isn't
there before the upload). I also modified the FTP test server and a few test
cases accordingly to match this modified behavior.
and when not crosscompiling verifies if it is IPv6 capable.
HAVE_INET_NTOP will only be defined when an IPv6 capable working
inet_ntop function is available.
2008-09-24 stable snapshot have a buf_mem_st.length structure member with
'int' data type.
OpenSSL un-released 0.9.9 CVS version has a buf_mem_st.length structure member
with 'size_t' data type since 2007-Oct-09.
These 4 typecasts should silence compiler warnings in all cases.
switching from one protocol to another in a single request (e.g.
redirecting from HTTP to FTP as in test 1055) by resetting
state.expect100header before every request.
date parser function. This makes our function less dependent on system-
provided functions and instead we do all the magic ourselves. We also no
longer depend on the TZ environment variable.
Markus Moeller reported: http://curl.haxx.se/mail/archive-2008-09/0016.html
- recv() errors other than those equal to EAGAIN now cause proper
CURLE_RECV_ERROR to get returned. This made test case 160 fail so I've now
disabled it until we can figure out another way to exercise that logic.
proxy" (http://curl.haxx.se/bug/view.cgi?id=2107377) that showed how a multi
interface using program didn't work when built with GnuTLS and a CONNECT
request was done over a proxy (basically test 502 over a proxy to a HTTPS
site). It turned out the ssl connect function would get called twice which
caused the second call to fail.
sites in cases where the cookie clearly has a very old expiry date. The
condition was simply that libcurl's date parser would fail to convert the
date and it would then count as a (timed-based) match. Starting now, a
missed date due to an unsupported date format or date range will now cause
the cookie to not match.
CURLOPT_POST301 (but adds a define for backwards compatibility for you who
don't define CURL_NO_OLDIES). This option allows you to now also change the
libcurl behavior for a HTTP response 302 after a POST to not use GET in the
subsequent request (when CURLOPT_FOLLOWLOCATION is enabled). I edited the
patch somewhat before commit. The curl tool got a matching --post302
option. Test case 1076 was added to verify this.
enabling this feature with CURLOPT_CERTINFO for a request using SSL (HTTPS
or FTPS), libcurl will gather lots of server certificate info and that info
can then get extracted by a client after the request has completed with
curl_easy_getinfo()'s CURLINFO_CERTINFO option. Linus Nielsen Feltzing
helped me test and smoothen out this feature.
Unfortunately, this feature currently only works with libcurl built to use
OpenSSL.
This feature was sponsored by networking4all.com - thanks!
"Connection: close" and actually close the connection after the
response-body, libcurl could still have outstanding data to send and it
would not properly notice this and stop sending. This caused weirdness and
sad faces. http://curl.haxx.se/bug/view.cgi?id=2080222
Note that there are still reasons to consider libcurl's behavior when
getting a >= 400 response code while sending data, as Craig Perras' note
"http upload: how to stop on error" specifies:
http://curl.haxx.se/mail/archive-2008-08/0138.html
an unlock in between) for a certain case and that in fact works when using
regular windows mutexes but not with pthreads'! Locks should of course not
get locked again so this is now fixed.
http://curl.haxx.se/mail/lib-2008-08/0422.html
firefox-db2pem.sh conversion script that converts a local Firefox db of ca
certs into PEM format, suitable for use with a OpenSSL or GnuTLS built
libcurl.
memory leak because it never called the OpenSSL function
CRYPTO_cleanup_all_ex_data() as it was supposed to. This was because of a
missing define in config-win32.h!
when including the OpenSSL header files. This is the recommended setting, this
prevents the undesired inclusion of header files with the same name as those
of OpenSSL but which do not belong to the OpenSSL package. The visible change
from previously released libcurl versions is that now OpenSSl enabled NetWare
builds also define USE_OPENSSL in config files, and that OpenSSL header files
must be located in a subdirectory named 'openssl'.
remain in use as internal curl_off_t print formatting strings for the internal
*printf functions which still cannot handle print formatting string directives
such as "I64d", "I64u", and others available on MSVC, MinGW, Intel's ICC, and
other DOS/Windows compilers.
This reverts previous commit part which did:
FORMAT_OFF_T -> CURL_FORMAT_CURL_OFF_T
FORMAT_OFF_TU -> CURL_FORMAT_CURL_OFF_TU
the names of the curl_off_t formatting string directives now become
CURL_FORMAT_CURL_OFF_T and CURL_FORMAT_CURL_OFF_TU.
CURL_FMT_OFF_T -> CURL_FORMAT_CURL_OFF_T
CURL_FMT_OFF_TU -> CURL_FORMAT_CURL_OFF_TU
Remove the use of an internal name for the curl_off_t formatting string directives
and use the common one available from the inside and outside of the library.
FORMAT_OFF_T -> CURL_FORMAT_CURL_OFF_T
FORMAT_OFF_TU -> CURL_FORMAT_CURL_OFF_TU
when a server responded with long headers and data. Luckily, the buffer
overflowed into another unused buffer, so no actual harm was done.
Added test cases 1060 and 1061 to verify.
line of a multiline FTP response whose last byte landed exactly at the end
of the BUFSIZE-length buffer would be treated as the terminal response
line. The following response code read in would then actually be the
end of the previous response line, and all responses from then on would
correspond to the wrong command. Test case 1062 verifies this.
Stop closing a never-opened ftp socket.
(http://curl.haxx.se/bug/view.cgi?id=2042430) with a patch. "NTLM Windows
SSPI code is not thread safe". This was due to libcurl using static
variables to tell wether to load the necessary SSPI DLL, but now the loading
has been moved to the more suitable curl_global_init() call.
(http://curl.haxx.se/bug/view.cgi?id=2042440) with a patch. He identified a
problem when using NTLM over a proxy but the end-point does Basic, and then
libcurl would do wrong when the host sent "Connection: close" as the proxy's
NTLM state was erroneously cleared.
NetWare curlbuild.h settings depend on whether LIBC or CLIB is used.
The NetWare specific Makefile is capable of knowing which target is being built.
So, finally, the NetWare Makefile will take care of generating curlbuild.h
connection with the multi interface even if a previous use of it caused a
CURLE_PEER_FAILED_VERIFICATION to get returned. I now make sure that failed
SSL connections properly close the connections.
proved how PUT and POST with a redirect could lead to a "hang" due to the
data stream not being rewound properly when it had to in order to get sent
properly (again) to the subsequent URL. This is now fixed and these test
cases are no longer disabled.
with -C - sent garbage in the Content-Range: header. I fixed this problem by
making sure libcurl always sets the size of the _entire_ upload if an app
attemps to do resumed uploads since libcurl simply cannot know the size of
what is currently at the server end. Test 1041 is no longer disabled.
incorrectly--the host name is treated as part of the user name and the
port number becomes the password. This can be observed in test 279
(was KNOWN_ISSUE #54).
an URL in a Location: header didn't have the scope ID removed, so an
invalid host name was used. Second, when the scope ID was removed, it
also removed any port number that may have existed in the URL.
parser to allow numerical IPv6-addresses to be specified with the scope
given, as per RFC4007 - with a percent letter that itself needs to be URL
escaped. For example, for an address of fe80::1234%1 the HTTP URL is:
"http://[fe80::1234%251]/"
true bug in libcurl built with OpenSSL. It made curl_easy_getinfo() more or
less always return 0 for CURLINFO_SSL_VERIFYRESULT because the function that
would set it to something non-zero would return before the assign in almost
all error cases. The internal variable is now set to non-zero from the start
of the function only to get cleared later on if things work out fine.
overrun" (http://curl.haxx.se/bug/view.cgi?id=2026240) identifying two
problems, and providing the fix for them:
- CURL_READFUNC_PAUSE did in fact not pause the _sending_ of data that it is
designed for but paused _receiving_ of data!
- libcurl didn't internally set the read counter to zero when this return
code was detected, which would potentially lead to junk getting sent to
the server.
finds out its return type and the types of its arguments. Added definitions
for non-configure systems config files, and introduced macro sreadfrom which
will be used on udp sockets as a recvfrom() wrapper.
set the attribute that has changed instead of all possible ones. Hopefully,
this will solve the "Permission denied" problem that Nagarajan Sreenivasan
reported when setting some modes, but regardless, it saves a protocol
round trip in the chmod case.
is set in fdset.events" (http://curl.haxx.se/bug/view.cgi?id=2015126) which
exactly pinpointed the problem only triggered on Windows Vista, provided
reference to docs and also a fix. There is much work behind Peter Lamberg's
excellent bug report. Thank You!
fix for it. It occured when you did a FTP transfer using
CURLFTPMETHOD_SINGLECWD and then did another one on the same easy handle but
switched to CURLFTPMETHOD_NOCWD. Due to the "dir depth" variable not being
cleared properly. Scott's test case is now known as test 539 and it
verifies the fix.
CURLINFO_APPCONNECT_TIME. This is set with the "application layer"
handshake/connection is completed (typically SSL, TLS or SSH). By using this
you can figure out the application layer's own connect time. You can extract
the time stamp using curl's -w option and the new variable named
'time_appconnect'. This feature was sponsored by Lenny Rachitsky at NeuStar.
(http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=487567) pointing out that
libcurl used Content-Range: instead of Range when doing a range request with
--head (CURLOPT_NOBODY). This is now fixed and test case 1032 was added to
verify.
handshake with a SSLv2 server, and it turned out to be because it didn't
recognize the cipher named "rc4-md5". In our list that cipher was named
plainly "rc4". I've now added rc4-md5 to work as an alias as Phil reported
that it made things work for him again.
crashed libcurl. This is now addressed by making sure we use "plain send"
internally when doing the socks handshake instead of the Curl_write()
function which is designed to use the "target" protocol. That's then SCP or
SFTP in this case. I also took the opportunity and cleaned up some ssh-
related #ifdefs in the code for readability.
libcurl to not tell the app properly when a socket was closed (when the name
resolve done by c-ares is done) and then immediately re-created and put to
use again (for the actual connection). Since the closure will make the
"watch status" get lost in several event-based systems libcurl will need to
tell the app about this close/re-create case.
multi interface with pipelining enabled as it would wrongly check for,
detect and close "dead connections" even though that connection was already
in use!
warning in the code though but we need NSS' base64.h header for that and we
don't currently have a suitable way to include it as our own base64.h header
kind of "blocks" it.
libraries are supported. Starting now, each underlying SSL library support
code does a set of defines for the 16 functions the generic layer (sslgen.c)
uses (all these new function defines use the prefix "curlssl_"). This
greatly simplified the generic layer in readability by involving much less
#ifdefs and other preprocessor stuff and should make it easier for people to
make libcurl work with new SSL libraries.
Hopefully I can later on document these 16 functions somewhat as well.
I also made most of the internal SSL-dependent functions (using Curl_ssl_
prefix) #defined to nothing when no SSL support is requested - previously
they would unnecessarily call mostly empty functions.
curl_easy_getinfo. It returns a pointer to a string with the most recently
used IP address. Modified test case 500 to also verify this feature. The
implementing of this feature was sponsored by Lenny Rachitsky at NeuStar.
the curl_multi_socket() API with HTTP pipelining enabled and could lead to
the pipeline basically stalling for a very long period of time until it took
off again.
provided excellent repeat recipes. I fixed the cases I managed to reproduce
but Jeff still got some (SCP) problems even after these fixes:
http://curl.haxx.se/mail/lib-2008-05/0342.html
how the HTTP redirect following code didn't properly follow to a new URL if
the new url was but a query string such as "Location: ?moo=foo". Test case
1031 was added to verify this fix.
_ Updated packages/OS400/curl.inc.in with new definitions.
_ New connect/bind/sendto/recvfrom wrappers to support AF_UNIX sockets.
_ Include files line length shortened below 100 chars.
_ Const parameter in lib/qssl.[ch].
_ Typos in packages/OS400/initscript.sh.
go straight to DO
we had multiple states for which the internal function returned no socket at
all to wait for, with the effect that libcurl calls the socket callback (when
curl_multi_socket() is used) with REMOVE prematurely (as it would be added
again within very shortly)
handler functions didn't return that the socket should be waited for writing,
but instead it was treated as if no socket was needing monitoring so REMOVE
was called prematurely
and receive data over a connection previously setup with curl_easy_perform()
and its CURLOPT_CONNECT_ONLY option. The sendrecv.c example was added to
show how they can be used.
when function clock_gettime() is available and the monotonic timer is
also available. Otherwise, in some cases, librt or libposix4 could be used
for linking even when finally not using the clock_gettime() function due
to lack of the monotonic clock.
when using CURL_AUTH_ANY" (http://curl.haxx.se/bug/view.cgi?id=1945240).
The problem was that when libcurl rewound a stream meant for upload when it
would prepare for a second request, it could accidentally continue the
sending of the rewound data on the first request instead of on the second.
Ben also provided test case 1030 that verifies this fix.
since libcurl used getprotobyname() and that isn't thread-safe. We now
switched to use IPPROTO_TCP unconditionally, but perhaps the proper fix is
to detect the thread-safe version of the function and use that.
http://curl.haxx.se/mail/lib-2008-05/0011.html
redirections and thus cannot use CURLOPT_FOLLOWLOCATION easily, we now
introduce the new CURLINFO_REDIRECT_URL option that lets applications
extract the URL libcurl would've redirected to if it had been told to. This
then enables the application to continue to that URL as it thinks is
suitable, without having to re-implement the magic of creating the new URL
from the Location: header etc. Test 1029 verifies it.
server input and response request files of the test harness sws server.
Reintroduce, for test # 1001, the <postcheck> small delay. The delay is
needed even with the accelerated writing of server input and response
request files in test harness sws server.
http://curl.haxx.se/mail/lib-2008-04/0385.html
Define HAVE_GSSMIT if <gssapi/{gssapi.h,gssapi_generic.h,gssapi_krb5.h}> are
available, otherwise define HAVE_GSSHEIMDAL if <gssapi.h> is available.
Only define GSS_C_NT_HOSTBASED_SERVICE to gss_nt_service_name if
GSS_C_NT_HOSTBASED_SERVICE isn't declared by the gssapi headers. This should
avoid breakage in case we wrongly recognize Heimdal as MIT again.
message when libcurl doesn't get a 220 back immediately on connect, I now
changed it to be more specific on what the problem is. Also worth noticing:
while the bug report contains an example where the response is:
421 There are too many connected users, please try again later
we cannot assume that the error message will always be this readable nor
that it fits within a particular boundary etc.
GET simply because previously when you set CURLOPT_NOBODY to TRUE first and
then FALSE you'd end up in a broken state where a HTTP request would do a
HEAD by still act a lot like for a GET and hang waiting for the content etc.
application to provide data for a multipart with the read callback. Note
that the size needs to be provided with CURLFORM_CONTENTSLENGTH when the
stream option is used. This feature is verified by the new test case
554. This feature was sponsored by Xponaut.
default instead of a ca bundle. The configure script will also look for a
ca path if no ca bundle is found and no option given.
- Fixed detection of previously installed curl-ca-bundle.crt
CURLOPT_FTP_CREATE_MISSING_DIRS to create a directory, and then re-used the
handle and uploaded another file to another directory that needed to be
created, the second upload would fail. Another case of a state variable that
wasn't properly reset between requests.
(http://curl.haxx.se/bug/view.cgi?id=1911069) that identified a race
condition in the name resolver code when the DNS cache is shared between
multiple easy handles, each running in simultaneous threads that could cause
crashes.
easy handle if curl_easy_reset() was used between them. I fixed it and Brian
verified that it cured his problem.
- Brian Ulm reported that if you first tried to download a non-existing SFTP
file and then fetched an existing one and re-used the handle, libcurl would
still report the second one as non-existing as well! I fixed it abd Brian
verified that it cured his problem.
select/poll calls will only be retried upon EINTR failures as
it previously was in lib/select.c revision 1.29
In this way Curl_socket_ready() and Curl_poll() will again fail
on any select/poll errors different than EINTR.
better control at the exact state of the connection's SSL status so that we
know exactly when it has completed the SSL negotiation or not so that there
won't be accidental re-uses of connections that are wrongly believed to be
in SSL-completed-negotiate state.
such as the CURLOPT_SSL_CTX_FUNCTION one treat that as if it was a Location:
following. The patch that introduced this feature was done for 7.11.0, but
this code and functionality has been broken since about 7.15.4 (March 2006)
with the introduction of non-blocking OpenSSL "connects".
It was a hack to begin with and since it doesn't work and hasn't worked
correctly for a long time and nobody has even noticed, I consider it a very
suitable subject for plain removal. And so it was done.
get a fresh one downloaded and created with 'make ca-bundle' or you can get
one from here => http://curl.haxx.se/docs/caextract.html if you want a fresh
new one extracted from Mozilla's recent list of ca certs.
The configure option --with-ca-bundle now lets you specify what file to use
as default ca bundle for your build. If not specified, the configure script
will check a few known standard places for a global ca cert to use.
DONE before the entire request operation is complete and thus we can't know in
what state it is for re-using, so we're forced to close it. In a perfect world
we can add code that keep track of if we really must close it here or not, but
currently we have no such detail knowledge.
Jerome Muffat-Meridol helped us work this out.
verification is requested. Previously it would even return failure if gnutls
failed to get the server cert even though no verification was asked for.
- Fix my Curl_timeleft() leftover mistake in the gnutls code
out and provides test program that demonstrates that libcurl might not set
error description message for error CURLE_COULDNT_RESOLVE_HOST for Windows
threaded name resolver builds. Fixed now.
(http://curl.haxx.se/bug/view.cgi?id=1889856): When using the gnutls ssl
layer, cleaning-up and reinitializing curl ends up with https requests
failing with "ASN1 parser: Element was not found" errors. Obviously a
regression added in 7.16.3.
"HttpOnly" feature introduced by Microsoft and apparently also supported by
Firefox: http://msdn2.microsoft.com/en-us/library/ms533046.aspx . HttpOnly
is now supported when received from servers in HTTP headers, when written to
cookie jars and when read from existing cookie jars.
the SingleRequest one to make pipelining better. It is a bit tricky to keep
them in the right place, to keep things related to the actual request or to
the actual connection in the right place.
(http://curl.haxx.se/bug/view.cgi?id=1879375) which describes how libcurl
got lost in this scenario: proxy tunnel (or HTTPS over proxy), ask to do any
proxy authentication and the proxy replies with an auth (like NTLM) and then
closes the connection after that initial informational response.
libcurl would not properly re-initialize the connection to the proxy and
continue the auth negotiation like supposed. It does now however, as it will
now detect if one or more authentication methods were available and asked
for, and will thus retry the connection and continue from there.
- I made the progress callback get called properly during proxy CONNECT.
CONNECT over a proxy. curl_multi_fdset() didn't report back the socket
properly during that state, due to a missing case in the switch in the
multi_getsock() function.
previously had a number of flaws, perhaps most notably when an application
fired up N transfers at once as then they wouldn't pipeline at all that
nicely as anyone would think... Test case 530 was also updated to take the
improved functionality into account.
The signalling of that a global DNS cache is wanted is done by setting the
option but the setting of the internal variable that it is in use must not be
done until it finally actually gets used!
NOTE and WARNING: I noticed that you can't actually switch off the global dns
cache with CURLOPT_DNS_USE_GLOBAL_CACHE but you couldn't do that previously
either and the option is very clearly and loudly documented as DO NOTE USE so
I won't bother to fix this bug now.
silly code left from when we switched to let the multi handle "hold" the dns
cache when using the multi interface... Of course this only triggered when a
certain function call returned error at the correct moment.
(http://curl.haxx.se/bug/view.cgi?id=1871269) and we could fix his hang-
problem that occurred when doing a large HTTP POST request with the
response-body read from a callback.
libcurl to seek in a given input stream. This is particularly important when
doing upload resumes when there's already a huge part of the file present
remotely. Before, and still if this callback isn't used, libcurl will read
and through away the entire file up to the point to where the resuming
begins (which of course can be a slow opereration depending on file size,
I/O bandwidth and more). This new function will also be preferred to get
used instead of the CURLOPT_IOCTLFUNCTION for seeking back in a stream when
doing multi-stage HTTP auth with POST/PUT.
(http://curl.haxx.se/bug/view.cgi?id=1868255) with a patch. It identifies
and fixes a problem with parsing WWW-Authenticate: headers with additional
spaces in the line that the parser wasn't written to deal with.
