New option that allows a user to ONLY switch off curl's progress meter
and leave everything else in "talkative" mode.
Reported-by: Piotr Komborski
Fixes#4422Closes#4470
This should again enable crazy-large download ranges of the style
[1-10000000] that otherwise easily ran out of memory starting in 7.66.0
when this new handle allocating scheme was introduced.
Reported-by: Peter Sumatra
Fixes#4393Closes#4438
When looping around the ranges and given URLs to create transfers, all
errors should exit the loop and return. Previously it would keep
looping.
Reported-by: SumatraPeter on github
Bug: #4393Closes#4396
This commit fixes a regression introduced by curl-7_65_3-5-gb88940850.
Detected by tests 2005, 2008, 2009, 2010, 2011, and 2012 with valgrind
and libmetalink enabled.
Closes#4326
Even though it cannot fall-back to a lower HTTP version automatically. The
safer way to upgrade remains via CURLOPT_ALTSVC.
CURLOPT_H3 no longer has any bits that do anything and might be removed
before we remove the experimental label.
Updated the curl tool accordingly to use "--http3".
Closes#4197
Repeatedly we see problems where using curl_multi_wait() is difficult or
just awkward because if it has no file descriptor to wait for
internally, it returns immediately and leaves it to the caller to wait
for a small amount of time in order to avoid occasional busy-looping.
This is often missed or misunderstood, leading to underperforming
applications.
This change introduces curl_multi_poll() as a replacement drop-in
function that accepts the exact same set of arguments. This function
works identically to curl_multi_wait() - EXCEPT - for the case when
there's nothing to wait for internally, as then this function will by
itself wait for a "suitable" short time before it returns. This
effectiely avoids all risks of busy-looping and should also make it less
likely that apps "over-wait".
This also changes the curl tool to use this funtion internally when
doing parallel transfers and changes curl_easy_perform() to use it
internally.
Closes#4163
As the plan has been laid out in DEPRECATED. Update docs accordingly and
verify in test 1174. Now requires the option to be set to allow HTTP/0.9
responses.
Closes#4191
... to avoid integer overflows later when multiplying with 1000 to
convert seconds to milliseconds.
Added test 1269 to verify.
Reported-by: Jason Lee
Closes#4166
USe configure --with-ngtcp2 or --with-quiche
Using either option will enable a HTTP3 build.
Co-authored-by: Alessandro Ghedini <alessandro@ghedini.me>
Closes#3500
This is done by making sure each individual transfer is first added to a
linked list as then they can be performed serially, or at will, in
parallel.
Closes#3804
... as larger values would rather indicate something silly (and could
potentially cause buffer problems).
Reported-by: pendrek at hackerone
Closes#4114
Commit 61faa0b420 fixed the progress bar
width calculation to avoid integer overflow, but failed to account for
the fact that initial_size is initialized to -1 when the file size is
retrieved from the remote on an upload, causing another signed integer
overflow. Fix by separately checking for this case before the width
calculation.
Closes#3984
Reported-by: Brian Carpenter (Geeknik Labs)
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
- Revert all commits related to the SASL authzid feature since the next
release will be a patch release, 7.65.1.
Prior to this change CURLOPT_SASL_AUTHZID / --sasl-authzid was destined
for the next release, assuming it would be a feature release 7.66.0.
However instead the next release will be a patch release, 7.65.1 and
will not contain any new features.
After the patch release after the reverted commits can be restored by
using cherry-pick:
git cherry-pick a14d72ca9499ff8c1cc36c2a8d520edf690
Details for all reverted commits:
Revert "os400: take care of CURLOPT_SASL_AUTHZID in curl_easy_setopt_ccsid()."
This reverts commit 0edf6907ae.
Revert "tests: Fix the line endings for the SASL alt-auth tests"
This reverts commit c2a8d52a13.
Revert "examples: Added SASL PLAIN authorisation identity (authzid) examples"
This reverts commit 8c1cc369d0.
Revert "curl: --sasl-authzid added to support CURLOPT_SASL_AUTHZID from the tool"
This reverts commit a9499ff136.
Revert "sasl: Implement SASL authorisation identity via CURLOPT_SASL_AUTHZID"
This reverts commit a14d72ca2f.
Using the memdebug.h mem-leak feature, I noticed 2 calls like:
FILE tool_parsecfg.c:70 fopen("c:\Users\Gisle\AppData\Roaming\_curlrc","rt")
FILE tool_parsecfg.c:114 fopen("c:\Users\Gisle\AppData\Roaming\_curlrc","rt")
No need for 'fopen(), 'fclose()' and a 'fopen()' yet again.
They serve very little purpose and mostly just add noise. Most of them
have been around for a very long time. I read them all before removing
or rephrasing them.
Ref: #3876Closes#3883
... since libcurl has started to be totally unaware of options for
disabled protocols they now return error.
Bug: c9c5304dd4 (commitcomment-33533937)
Reported-by: Marcel Raad
Closes#3886
- remove unused variables
- declare conditionally used variables conditionally
- suppress unused variable warnings in the CMake tests
- remove dead variable stores
- consistently use WIN32 macro to detect Windows
Closes https://github.com/curl/curl/pull/3739
Commit f5bc578f4c reintroduced the
warning fixed in commit 2f5f31bb57.
Extend fhnd's scope and reuse that variable instead of calling
_get_osfhandle a second time to fix the warning again.
Closes https://github.com/curl/curl/pull/3718
- Improve console detection.
Prior to this change WriteConsole could be called to write to a handle
that may not be a console, which would cause an error. This issue is
limited to character devices that are not also consoles such as the null
device NUL.
Bug: https://github.com/curl/curl/issues/3175#issuecomment-439068724
Reported-by: Gisle Vanem
... and remove it from the dist tarball. It has served its time, it
barely gets updated anymore and "everything curl" is now convering all
this document once tried to include, and does it more and better.
In the compressed scenario, this removes ~15K data from the binary,
which is 25% of the -M output.
It remains in the git repo for now for as long as the web site builds a
page using that as source. It renders poorly on the site (especially for
mobile users) so its not even good there.
Closes#3587
Option -F generates an intermediate representation of the mime structure
that is used later to create the libcurl mime structure and generate
the --libcurl statements.
Reported-by: Daniel Stenberg
Fixes#3532Closes#3546
Commit 3f16990ec8 followed-up a bug in b49652ac66 but was
inadvertently introducing a new bug in the ternary expression.
Close#3555
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Use long for CURLOPT_HTTP09_ALLOWED to fix the following warning:
tool_operate.c: In function 'operate_do':
../include/curl/typecheck-gcc.h:47:9: error: call to
'_curl_easy_setopt_err_long' declared with attribute warning:
curl_easy_setopt expects a long argument for this option [-Werror]
Closes https://github.com/curl/curl/pull/3534
Stick to "Schannel" everywhere. The configure option --with-winssl is
kept to allow existing builds to work but --with-schannel is added as an
alias.
Closes#3504
MinGW-w64 defaults to targeting Windows 7 now, so GetTickCount64 is
used and the milliseconds are represented as unsigned long long,
leading to a compiler warning when implicitly converting them to long.
Added CURLOPT_HTTP09_ALLOWED and --http0.9 for this purpose.
For now, both the tool and library allow HTTP/0.9 by default.
docs/DEPRECATE.md lays out the plan for when to reverse that default: 6
months after the 7.64.0 release. The options are added already now so
that applications/scripts can start using them already now.
Fixes#2873Closes#3383
All resources defined in lib/libcurl.rc and curl.rc are language
neutral.
winbuild/MakefileBuild.vc ALWAYS defines the macro DEBUGBUILD, so the
ifdef's in line 33 of lib/libcurl.rc and src/curl.rc are wrong.
Replace the hard-coded constants in both *.rc files with #define'd
values.
Thumbs-uped-by: Rod Widdowson, Johannes Schindelin
URL: https://curl.haxx.se/mail/lib-2018-11/0000.htmlCloses#3348
If another string had been set first, the writout function for reading
the syntax from file would leak the previously allocated memory.
Reported-by: Brian Carpenter
Fixes#3322Closes#3330
The function does not return the same value as snprintf() normally does,
so readers may be mislead into thinking the code works differently than
it actually does. A different function name makes this easier to detect.
Reported-by: Tomas Hoger
Assisted-by: Daniel Gustafsson
Fixes#3296Closes#3297
The partial struct initialization in 397664a065 caused
a warning on uninitialized MODULEENTRY32 struct members:
/src/tool_doswin.c:681:3: warning: missing initializer for field
'th32ModuleID' of 'MODULEENTRY32 {aka struct tagMODULEENTRY32}'
[-Wmissing-field-initializers]
This is sort of a bogus warning as the remaining members will be set
to zero by the compiler, as all omitted members are. Nevertheless,
remove the warning by omitting all members and setting the dwSize
members explicitly.
Closes#3254
Reviewed-by: Marcel Raad <Marcel.Raad@teamviewer.com>
Reviewed-by: Jay Satiro <raysatiro@yahoo.com>
Commit 5bfaa86ceb introduced a new
compiler warning on Windows cross compilation with GCC. See below
for an example of the warning from the autobuild logs (whitespace
edited to fit):
/src/tool_cb_wrt.c:175:9: warning: cast from function call of type
'intptr_t {aka long long int}' to non-matching type 'void *'
[-Wbad-function-cast]
(HANDLE) _get_osfhandle(fileno(outs->stream)),
^
Store the return value from _get_osfhandle() in an intermediate
variable and cast the variable in WriteConsoleW() rather than the
function call directly to avoid a compiler warning.
In passing, also add inspection of the MultiByteToWideChar() return
value and return failure in case an error is reported.
Closes#3263
Reviewed-by: Marcel Raad <Marcel.Raad@teamviewer.com>
Reviewed-by: Viktor Szakats <commit@vszakats.net>
The end port number in a given range was not included in the range used,
as it is documented to be.
Reported-by: infinnovation-dev on github
Fixes#3251Closes#3255
The tool's local port command line range parser didn't check for integer
overflows and could pass "weird" data to libcurl for this option.
libcurl however, has a strict range check for the values so it rejects
anything outside of the accepted range.
Reported-by: Brian Carpenter
Closes#3242
Follow-up to e431daf013, as I did the wrong correction for a compiler
warning. It should be a break and not a fall-through.
Pointed-out-by: Frank Gevaerts
- Add an undocumented diagnostic option for Windows to show the full
paths of all loaded modules regardless of whether or not libcurl
initialization succeeds.
This is needed so that in the CI we can get a list of all DLL
dependencies after initialization (when they're most likely to have
finished loading) and then package them as artifacts so that a
functioning build can be downloaded. Also I imagine it may have some use
as a diagnostic for help requests.
Ref: https://github.com/curl/curl/pull/3103
Closes https://github.com/curl/curl/pull/3208
As has been outlined in the DEPRECATE.md document, the axTLS code has
been disabled for 6 months and is hereby removed.
Use a better supported TLS library!
Assisted-by: Daniel Gustafsson
Closes#3194
Classic MinGW has neither InitializeCriticalSectionEx nor
GetTickCount64, independent of the target Windows version.
Closes https://github.com/curl/curl/pull/3113
Now FILE transfers send headers to the header callback like HTTP and
other protocols. Also made curl_easy_getinfo(...CURLINFO_PROTOCOL...)
work for FILE in the callbacks.
Makes "curl -i file://.." and "curl -I file://.." work like before
again. Applied the bold header logic to them too.
Regression from c1c2762 (7.61.0)
Reported-by: Shaun Jackman
Fixes#3083Closes#3101
Use 'GNUInstallDirs' standard module to set destinations of installed
files.
Use uppercase "CURL" names instead of lowercase "curl" to match standard
'FindCURL.cmake' CMake module:
* https://cmake.org/cmake/help/latest/module/FindCURL.html
Meaning:
* Install 'CURLConfig.cmake' instead of 'curl-config.cmake'
* User should call 'find_package(CURL)' instead of 'find_package(curl)'
Use 'configure_package_config_file' function to generate
'CURLConfig.cmake' file. This will make 'curl-config.cmake.in' template
file smaller and handle components better. E.g. current configuration
report no error if user specified unknown components (note: new
configuration expects no components, report error if user will try to
specify any).
Closes https://github.com/curl/curl/pull/2849
- replace tabs with spaces where possible
- remove line ending spaces
- remove double/triple newlines at EOF
- fix a non-UTF-8 character
- cleanup a few indentations/line continuations
in manual examples
Closes https://github.com/curl/curl/pull/3037
This enables level 4 instead of the default level 3, which of the
currently used comments only allows /* FALLTHROUGH */ to silence the
warning.
Closes https://github.com/curl/curl/pull/2747
This warning used to be enabled only for clang as it's a bit stricter
on GCC. Silence the remaining occurrences and enable it on GCC too.
Closes https://github.com/curl/curl/pull/2747
... simply because this is usually a sign of the user having omitted the
file name and the next option is instead "eaten" by the parser as a file
name.
Add test1268 to verify
Closes#2885
This allows the use of PKCS#11 URI for certificates and keys without
setting the corresponding type as "ENG" and the engine as "pkcs11"
explicitly. If a PKCS#11 URI is provided for certificate, key,
proxy_certificate or proxy_key, the corresponding type is set as "ENG"
if not provided and the engine is set to "pkcs11" if not provided.
Acked-by: Nikos Mavrogiannopoulos
Closes#2333
- Get rid of variable that was generating false positive warning
(unitialized)
- Fix issues in tests
- Reduce scope of several variables all over
etc
Closes#2631
* enable it in `src/Makefile.m32`
* enable it in `winbuild/MakefileBuild.vc` if a custom manifest is
_not_ enabled via the existing `EMBED_MANIFEST` option
* enable it for all Windows CMake builds (also disable the built-in
minimal manifest, added by CMake by default.)
For other build systems, add the `-DCURL_EMBED_MANIFEST` option to
the list of RC (Resource Compiler) flags to enable the manifest
included in `src/curl.rc`. This may require to disable whatever
automatic or other means in which way another manifest is added to
`curl.exe`.
Notice that Borland C doesn't support this method due to a
long-pending resource compiler bug. Watcom C may also not handle
it correctly when the `-zm` `wrc` option is used (this option may
be unnecessary though) and regardless of options in certain earlier
revisions of the 2.0 beta version.
Closes https://github.com/curl/curl/pull/1221
Fixes https://github.com/curl/curl/issues/2591
Adds CURLOPT_TLS13_CIPHERS and CURLOPT_PROXY_TLS13_CIPHERS.
curl: added --tls13-ciphers and --proxy-tls13-ciphers
Fixes#2435
Reported-by: zzq1015 on github
Closes#2607
The feature is only enabled if the output is believed to be a tty.
-J: There's some minor differences and improvements in -J handling, as
now J should work with -i and it actually creates a file first using the
initial name and then *renames* that to the one found in
Content-Disposition (if any).
-i: only shows headers for HTTP transfers now (as documented).
Previously it would also show for pieces of the transfer that were HTTP
(for example when doing FTP over a HTTP proxy).
-i: now shows trailers as well. Previously they were not shown at all.
--libcurl: the CURLOPT_HEADER is no longer set, as the header output is
now done in the header callback.
This extends the INDENTATION case to also handle 'else' statements
and require proper indentation on the following line. Also fixes the
offending cases found in the codebase.
Closes#2532
- Move verify_certificate functionality in schannel.c into a new
file called schannel_verify.c. Additionally, some structure defintions
from schannel.c have been moved to schannel.h to allow them to be
used in schannel_verify.c.
- Make verify_certificate functionality for Schannel available on
all versions of Windows instead of just Windows CE. verify_certificate
will be invoked on Windows CE or when the user specifies
CURLOPT_CAINFO and CURLOPT_SSL_VERIFYPEER.
- In verify_certificate, create a custom certificate chain engine that
exclusively trusts the certificate store backed by the CURLOPT_CAINFO
file.
- doc updates of --cacert/CAINFO support for schannel
- Use CERT_NAME_SEARCH_ALL_NAMES_FLAG when invoking CertGetNameString
when available. This implements a TODO in schannel.c to improve
handling of multiple SANs in a certificate. In particular, all SANs
will now be searched instead of just the first name.
- Update tool_operate.c to not search for the curl-ca-bundle.crt file
when using Schannel to maintain backward compatibility. Previously,
any curl-ca-bundle.crt file found in that search would have been
ignored by Schannel. But, with CAINFO support, the file found by
that search would have been used as the certificate store and
could cause issues for any users that have curl-ca-bundle.crt in
the search path.
- Update url.c to not set the build time CURL_CA_BUNDLE if the selected
SSL backend is Schannel. We allow setting CA location for schannel
only when explicitly specified by the user via CURLOPT_CAINFO /
--cacert.
- Add new test cases 3000 and 3001. These test cases check that the first
and last SAN, respectively, matches the connection hostname. New test
certificates have been added for these cases. For 3000, the certificate
prefix is Server-localhost-firstSAN and for 3001, the certificate
prefix is Server-localhost-secondSAN.
- Remove TODO 15.2 (Add support for custom server certificate
validation), this commit addresses it.
Closes https://github.com/curl/curl/pull/1325
When a zeroed out allocation is required, use calloc() rather than
malloc() followed by an explicit memset(). The result will be the
same, but using calloc() everywhere increases consistency in the
codebase and avoids the risk of subtle bugs when code is injected
between malloc and memset by accident.
Closes https://github.com/curl/curl/pull/2497
Only treat response code as FTP response codes in case the
protocol type is FTP.
This fixes an issue where an HTTP download was treated as FTP
in case libcurl returned with 33. This happens when the
download has already finished and the server responses 416:
HTTP/1.1 416 Requested Range Not Satisfiable
This should not be treated as an FTP error.
Fixes#2464Closes#2465
- In keeping with the naming of our other connect timeout options rename
CURLOPT_HAPPY_EYEBALLS_TIMEOUT to CURLOPT_HAPPY_EYEBALLS_TIMEOUT_MS.
This change adds the _MS suffix since the option expects milliseconds.
This is more intuitive for our users since other connect timeout options
that expect milliseconds use _MS such as CURLOPT_TIMEOUT_MS,
CURLOPT_CONNECTTIMEOUT_MS, CURLOPT_ACCEPTTIMEOUT_MS.
The tool option already uses an -ms suffix, --happy-eyeballs-timeout-ms.
Follow-up to 2427d94 which added the lib and tool option yesterday.
Ref: https://github.com/curl/curl/pull/2260
- Add new option CURLOPT_HAPPY_EYEBALLS_TIMEOUT to set libcurl's happy
eyeball timeout value.
- Add new optval macro CURL_HET_DEFAULT to represent the default happy
eyeballs timeout value (currently 200 ms).
- Add new tool option --happy-eyeballs-timeout-ms to expose
CURLOPT_HAPPY_EYEBALLS_TIMEOUT. The -ms suffix is used because the
other -timeout options in the tool expect seconds not milliseconds.
Closes https://github.com/curl/curl/pull/2260
... since the libc provided one are locale dependent in a way we don't
want. Also, the "native" isalnum() (for example) works differently on
different platforms which caused test 1307 failures on macos only.
Closes#2269
djgpp do have 'mkdir(dir, mode)'. Other DOS-compilers does not
But djgpp seems the only choice for MSDOS anyway.
PellesC do have a 'F_OK' defined in it's <unistd.h>.
Update year in Copyright.
Get screen width from the environment variable COLUMNS first, if set. If
not, use ioctl(). If nether works, assume 79.
Closes#2242
The "refresh" is for the -# output when no total transfer size is
known. It will now only use a single updated line even for this case:
The "-=O=-" ship moves when data is transferred. The four flying
"hashes" move (on a sine wave) on each refresh, independent of data.
This reverts commit 9ffad8eb13.
It was actually added rather recently in 8e8afa82cb due to a crash
that would otherwise happen in the RTSP code. As I don't think we've
fixed that behavior yet, we better keep this work-around until we have
fixed it better.
These are OS/2-specific things added to the code in the year 2000. They
were always ugly. If there's any user left, they still don't need it
done this way.
Closes#2166
That data is only ever used by the CURLOPT_INTERLEAVEFUNCTION callback
and that option isn't set or used by the curl tool!
Updates the 9 tests that verify --libcurl
Closes#2167
Make it use a max 10Hz update frequency for this case as well. Return
early if the "point" hasn't moved since last invoke.
Reported-by: Elliot Saba
Fixes#2158Closes#2163
This uses the brotli external library (https://github.com/google/brotli).
Brotli becomes a feature: additional curl_version_info() bit and
structure fields are provided for it and CURLVERSION_NOW bumped.
Tests 314 and 315 check Brotli content unencoding with correct and
erroneous data.
Some tests are updated to accomodate with the now configuration dependent
parameters of the Accept-Encoding header.
By properly keeping track of the last entry in the list of URLs/uploads
to handle, curl now avoids many meaningless traverses of the list which
speeds up many-URL handling *MASSIVELY* (several magnitudes on 100K
URLs).
Added test 1291, to verify that it doesn't take ages - but we don't have
any detection of "too slow" command in the test suite.
Reported-by: arainchik on github
Fixes#1959Closes#2052
Do not generate line with the current date, such as:
* Generation time: Tue Oct-24 18:01:41 2017
This will improve reproducibility. The generated string is only
part of a comment, so there should be no adverse consequences.
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
closes#2026
Also upgrade test 1133 to cover this case and clarify man page about
form data quoting.
Bug: https://github.com/curl/curl/issues/2022
Reported-By: omau on github
The config files define curl and libcurl targets as imported targets
CURL::curl and CURL::libcurl. For backward compatibility with CMake-
provided find-module the CURL_INCLUDE_DIRS and CURL_LIBRARIES are
also set.
Closes#1879
Allow to ovverride certain build tools, making it possible to
use LLVM/Clang to build curl. The default behavior is unchanged.
To build with clang (as offered by MSYS2), these settings can
be used:
CURL_CC=clang
CURL_AR=llvm-ar
CURL_RANLIB=llvm-ranlib
Closes https://github.com/curl/curl/pull/1993
If stdin is not a regular file, its content is memory-buffered to enable
a possible data "rewind".
In all cases, stdin data size is determined before real use to avoid
having an unknown part's size.
--libcurl generated code is left as an unbuffered stdin fread/fseek callback
part with unknown data size.
Buffering is not supported in deprecated curl_formadd() API.
When curl and libcurl are built with some protocols disabled, they stop
setting and receiving some options that don't make sense with those
protocols. In particular, when HTTP is disabled many options aren't set
that are used only by HTTP. However, some options that appear to be
HTTP-only are actually used by other protocols as well (some despite
having HTTP in the name) and should be set, but weren't. This change now
causes some of these options to be set and used for more (or for all)
protocols. In particular, this fixes tests 646 through 649 in an
HTTP-disabled build, which use the MIME API in the mail protocols.
In MultiSSL mode (i.e. when more than one SSL backend is compiled
in), we cannot use the compile time flag `USE_NSS` as indicator that
the NSS backend is in use. As far as Metalink is concerned, the SSL
backend is only used for MD5, SHA-1 and SHA-256 calculations,
therefore one of the available SSL backends is selected at compile
time, in a strict order of preference.
Let's introduce a new `HAVE_NSS_CONTEXT` constant that can be used
to determine whether the SSL backend used for Metalink is the NSS
backend, and use that to guard the code that wants to de-initialize
the NSS-specific data structure.
Ref: https://github.com/curl/curl/pull/1848
... previously it would store a return value even when it returned
error, which could make the value get used anyway!
Reported-by: Brian Carpenter
Closes#1893
- The part kind MIMEKIND_FILE and associated code are suppressed.
- Seek data origin offset not used anymore: suppressed.
- MIMEKIND_NAMEDFILE renamed MIMEKIND_FILE; associated fields/functions
renamed accordingly.
- Curl_getformdata() processes stdin via a callback.
curl_mime_encoder() is operational and documented.
curl tool -F option is extended with ";encoder=".
curl tool --libcurl option generates calls to curl_mime_encoder().
New encoder tests 648 & 649.
Test 1404 extended with an encoder specification.
To support telling a string is nul-terminated, symbol CURL_ZERO_TERMINATED
has been introduced.
Documentation updated accordingly.
symbols in versions updated. Added form API symbols deprecation info.
This feature is badly supported in Windows: as a replacement, a caller has
to use curl_mime_data_cb() with fread, fseek and possibly fclose
callbacks to process opened files.
The cli tool and documentation are updated accordingly.
The feature is however kept internally for form API compatibility, with
the known caveats it always had.
As a side effect, stdin size is not determined by the cli tool even if
possible and this results in a chunked transfer encoding. Test 173 is
updated accordingly.
Previously, the code assumed that at most one of the SSL backends would
be compiled in, emulating OpenSSL's functions if the configured backend
was not OpenSSL itself.
However, now we allow building with multiple SSL backends and choosing
one at runtime. Therefore, metalink needs to be adjusted to handle this
scenario, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The previous message was just too long for ordinary people and it was
encouraging users to use `--insecure` a little too easy.
Based-on-work-by: Frank Denis
Closes#1810Closes#1817
libidn was replaced with libidn2 last year in configure.
Caveat: libidn2 may depend on a list of further libs.
These can be manually specified via CURL_LDFLAG_EXTRAS.
Closes https://github.com/curl/curl/pull/1815
The required low-level logic was already available as part of
`libssh2` (via `LIBSSH2_FLAG_COMPRESS` `libssh2_session_flag()`[1]
option.)
This patch adds the new `libcurl` option `CURLOPT_SSH_COMPRESSION`
(boolean) and the new `curl` command-line option `--compressed-ssh`
to request this `libssh2` feature. To have compression enabled, it
is required that the SSH server supports a (zlib) compatible
compression method and that `libssh2` was built with `zlib` support
enabled.
[1] https://www.libssh2.org/libssh2_session_flag.html
Ref: https://github.com/curl/curl/issues/1732
Closes https://github.com/curl/curl/pull/1735
Commit curl-7_54_0-118-g8b2f22e changed the output format of curl --help
to use <file> and <dir> instead of FILE and DIR, which caused zsh.pl to
produce a broken completion script:
% curl --<TAB>
_curl:10: no such file or directory: seconds
Closes#1779
The fix for this in 8661a0aacc01492e0436275ff36a21734f2541bb wasn't
complete: if the parsed number in num is larger than will fit in a long,
the conversion is undefined behaviour (causing test1427 to fail for me
on IA32 with GCC 7.1, although it passes on AMD64 and ARMv7). Getting
rid of the cast means the comparison will be done using doubles.
It might make more sense for the max argument to also be a double...
Fixes#1750Closes#1749
Make the number parser aware of the maximum limit curl accepts for a
value and return an error immediately if larger, instead of running an
integer overflow later.
Fixes#1730Closes#1736
Prior to this change (SET_)ERRNO mapped to GetLastError/SetLastError
for Win32 and regular errno otherwise.
I reviewed the code and found no justifiable reason for conflating errno
on WIN32 with GetLastError/SetLastError. All Win32 CRTs support errno,
and any Win32 multithreaded CRT supports thread-local errno.
Fixes https://github.com/curl/curl/issues/895
Closes https://github.com/curl/curl/pull/1589
GCC 4.4 complains:
tool_cb_wrt.c:81: error: declaration of ‘isatty’ shadows a global
declaration
/usr/include/unistd.h:782: error: shadowed declaration is here
Fix this by renaming the variable.
Closes https://github.com/curl/curl/pull/1661
... to enable sending "OPTIONS *" which wasn't possible previously.
This option currently only works for HTTP.
Added test cases 1298 + 1299 to verify
Fixes#1280Closes#1462
... unless "--output -" is used. Binary detection is done by simply
checking for a binary zero in early data.
Added test 1425 1426 to verify.
Closes#1512
The multiply() function that is used to avoid integer overflows, was
itself reason for a possible division by zero error when passed a
specially formatted glob.
Reported-by: GwanYeong Kim
Don't malloc() the temporary buffer, and use the correct type:
SearchPath() works with TCHAR, but SearchPathA() works with char.
Set the buffer size to MAX_PATH, because the terminating null byte
is already included in MAX_PATH.
Reviewed-by: Daniel Stenberg
Reviewed-by: Marcel Raad
Closes#1548
... and support and additional "security patched" date for those who
enhance older versions that way. Pass on the define CURL_PATCHSTAMP with
a date for that.
Building with non-release headers shows the date as [unreleased].
Also: this changes the date format generated in the curlver.h file to be
"YYYY-MM-DD" (no name of the day or month, no time, no time zone) to
make it easier on the eye and easier to parse. Example (new) date
string: 2017-05-09
Suggested-by: Brian Childs
Closes#1474
... using the docs/cmdline-opts/gen.pl script, so that we get all the
command line option documentation from the same source.
The generation of the list has to be done manually and pasted into the
source code.
Closes#1465
