Make sure that Curl_cache_addr() errors are propagated to callers of
loadhostpairs().
(this loadhostpairs function caused a scan-build warning due to the
'dns' variable getting assigned but never used)
Doing curlx_strtoofft() on the size just to figure out the end of it
causes a compiler warning since the result wasn't used, but is also a
bit of a waste.
Since the original `conn' pointer was used after the `connectdata' it
points to has been closed/cleaned up by Curl_reconnect_request it caused
a crash. We must make sure to use the newly created connection instead!
URL: http://curl.haxx.se/mail/lib-2010-12/0202.html
Make the c-ares resolver code ask for both IPv4 and IPv6 addresses when
IPv6 is enabled.
This is a workaround for the missing ares_getaddrinfo() and is a lot
easier to implement.
Note that as long as c-ares returns IPv4 addresses when IPv6 addresses
were requested but missing, this will cause a host's IPv4 addresses to
occur twice in the DNS cache.
URL: http://curl.haxx.se/mail/lib-2010-12/0041.html
The SSL_SERVER_VERIFY_LATER bit in the ssl_ctx_new() call allows the
code to verify the peer certificate explicitly after the handshake and
then the "data->set.ssl.verifypeer" option works.
The public axTLS header (at least as of 1.2.7) redefines the memory
functions. We #undef those again immediately after the public header to
limit the damage. This should be fixed in axTLS.
Failed HTTPS tests: 301, 306, 311, 312, 313, 560
311, 312 need more detailed error reporting from axTLS.
313 relates to CRL, which hasn't been implemented yet.
Added axTLS to autotool files and glue code to misc other files.
axtls.h maps SSL API functions, but may change.
axtls.c is just a stub file and will definitely change.
The function that checks if pipelining is possible now requires the HTTP
bit to be set so that it doesn't mistakenly tries to do it for other
protocols.
Bug: http://curl.haxx.se/mail/lib-2010-12/0152.html
Reported by: Dmitri Shubin
The generic timeout code must not check easy handles that are already
completed. Going to completed (again) within there risked decreasing the
number of alive handles again and thus it could go negative.
This regression bug was added in 7.21.2 in commit ca10e28f06
ossl_connect_common() now checks whether or not 'struct
connectdata->state' is equal 'ssl_connection_complete' and if so, will
return CURLE_OK with 'done' set to 'TRUE'. This check prevents
ossl_connect_common() from creating a new ssl connection on an existing
ssl session which causes openssl to fail when it tries to parse an
encrypted TLS packet since the cipher data was effectively thrown away
when the new ssl connection was created.
Bug: http://curl.haxx.se/mail/lib-2010-11/0169.html
It helps to prevent a hangup with some FTP servers in case idle session
timeout has exceeded. But it may be useful also for other protocols
that send any quit message on disconnect. Currently used by FTP, POP3,
IMAP and SMTP.
When looping in this function and checking for the timeout being
expired, it was not updating the reference time when calculating the
timediff since previous round which made it think each subsequent loop
to have taken longer than it actually did.
I also modified the function to use the generic Curl_timeleft() function
instead of the custom logic.
Bug: http://curl.haxx.se/bug/view.cgi?id=3112579
Ensure that spurious results from system's getaddrinfo() ares not propagated
by Curl_getaddrinfo_ex() into the library.
Also ensure that the ai_addrlen member of Curl_getaddrinfo_ex()'s output linked
list of Curl_addrinfo structures has appropriate family-specific address size.
On Windows, translate WSAGetLastError() to errno values as GNU
TLS does it internally, too. This is necessary because send() and
recv() on Windows don't set errno when they fail but GNU TLS
expects a proper errno value.
Bug: http://curl.haxx.se/bug/view.cgi?id=3110991
When no timeout is set, we call the socket_ready function with a timeout
value of 0 during handshake, which makes it loop too much/fast in this
function. It also made this function return CURLE_OPERATION_TIMEDOUT
wrongly on a slow handshake.
However, the particular bug report that highlighted this problem is not
solved by this fix, as this fix only makes the more proper error get
reported instead.
Bug: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=594150
Reported by: Johannes Ernst
While changing Curl_sec_read_msg to accept an enum protection_level
instead of an int, I went ahead and fixed the usage of the associated
fields.
Some code was assuming that prot_clear == 0. Fixed those to use the
proper value. Added assertions prior to any code that would set the
protection level.
This is the advised way of checking for errors in the GSS-API RFC.
Also added some '\n' to the error message so that they are not mixed
with other outputs.
The IP version choice was previously only in the UserDefined struct
within the SessionHandle, but since we sometimes alter that option
during a request we need to have it on a per-connection basis.
I also moved more "init conn" code into the allocate_conn() function
which is designed for that purpose more or less.
CURLOPT_RESOLVE is a new option that sends along a curl_slist with
name:port:address sets that will populate the DNS cache with entries so
that request can be "fooled" to use another host than what otherwise
would've been used. Previously we've encouraged the use of Host: for
that when dealing with HTTP, but this new feature has the added bonus
that it allows the name from the URL to be used for TLS SNI and server
certificate name checks as well.
This is a first change. Surely more will follow to make it decent.
If the query result has a binary attribute, the binary attribute is
base64 encoded. But all following non binary attributes are also base64
encoded which is wrong.
This is a test (LDAP server is public).
curl
ldap://x500.bund.de:389/o=Bund,c=DE?userCertificate,certificateSerialNumber?sub
?cn=*Woehleke*
If you use a custom Host: name in a request to a SSL server, libcurl
will now use that given name when it verifies the server certificate to
be correct rather than using the host name used in the actual URL.
When given a custom host name in a Host: header, we can use it for
several different purposes other than just cookies, so we rename it and
use it for SSL SNI etc.
Some FTP servers (e.g. Pure-ftpd) end up hanging if we close the data
connection before transferring all the requested data. If we send ABOR
in that case, it prevents the server from hanging.
Bug: https://bugzilla.redhat.com/643656
Reported by: Pasi Karkkainen, Patrick Monnerat
These haven't worked in at least 8 years due to missing source
files, and most active RiscOS developers these days apparently
cross-compile anyway.
Signed-off-by: James Bursa <james@zamez.org>
In libssh2 1.2.8, libssh2_session_handshake() replaces
libssh2_session_startup() to fix the previous portability problem with
the socket type that was too small for win64 and thus easily could cause
crashes and more.
It is a bad idea to use the public prefix used by another library and
now we realize that libssh2 introduces a symbol in the upcoming version
1.2.8 that conflicts with our static function named libssh2_free.
When failing to build form post due to an error, the code now does a
proper failf(). Previously libcurl would report an error like "failed
creating formpost data" when a file wasn't possible to open which was
not easy for users to figure out.
I also lower cased a function name to be named more curl-style and
removed some unnecessary code.
The URL parser got a little stricter as it now considers a ? to be a
host name divider so that the slightly sloppier URLs work too. The
problem that made me do this change was the reported problem with an URL
like: www.example.com?email=name@example.com This form of URL is not
really a legal URL (due to the missing slash after the host name) but is
widely accepted by all major browsers and libcurl also already accepted
it, it was just the '@' letter that triggered the problem now.
The side-effect of this change is that now libcurl no longer accepts the
? letter as part of user-name or password when given in the URL, which
it used to accept (and is tested in test 191). That letter is however
mentioned in RFC3986 to be required to be percent encoded since it is
used as a divider.
Bug: http://curl.haxx.se/bug/view.cgi?id=3090268
In order to avoid for example the pingpong protocols to issue STARTTLS
(or equivalent) even though there's no SSL support built-in.
Reported by: Sune Ahlgren
Bug: http://curl.haxx.se/mail/archive-2010-10/0045.html
As the change in 5f0ae7a062 added a precaution against negative
file sizes that for some reason managed to get returned, this change now
introduces the same check at the second place in the code where the file
size from the libssh2 stat call is used.
This check might not be suitable for a 32 bit curl_off_t, but libssh2.h
assumes long long to work and to be 64 bit so I believe such a small
curl_off_t will be very unlikely to occur in the wild.
Renamed SDK_* to NDK_*; made NDK_* defines overwriteable from
environment; removed now obsolete YACC macro;
moved some curl_config.h defines to IPv6 section since they
are only needed when IPv6 is enabled - this makes libcurl compile
with older NDKs too which were not IPv6-aware.
We forgot to release the buffer passed to gss_init_sec_context.
The previous logic was difficult to read as we were reusing the same
variable (gssbuf) for both input buffer and output buffer. Splitted the
logic in 2 variables to better underline who needs to be released.
Also made the code break at 80 lines.
This fixes a memory leak related to the GSS-API code.
Added a krb5_init and krb5_end functions. Also removed a work-around
the lack of proper initialization of the GSS-API context.
It was pointed out that the special case libcurl did for 416 was
incorrect and wrong. 416 is not really different to other errors so the
response body must be handled like for other errors/http responses.
Reported by: Chris Smowton
Bug: http://curl.haxx.se/bug/view.cgi?id=3076808
It is still not clarified exactly why this happens, but libssh2
sometimes report a negative file size for the remote SFTP file and that
deeply confuses libcurl (or crashes it) so this precaution is added to
avoid badness.
Reported by: Ernest Beinrohr
Bug: http://curl.haxx.se/bug/view.cgi?id=3076430
Remove a leak seen on Kerberos/MIT (gss_OID is copied internally and
we were leaking it). Now we just pass NULL as advised in RFC2744.
|tmp| was never set back to buf->data.
Cleaned up Curl_sec_end to take into account failure in Curl_sec_login
(where conn->mech would be NULL but not conn->app_data or
conn->in_buffer->data).
Following a change in the way socket handler are registered, the custom
recv and send method were conditionaly registered.
We need to register them everytime to handle the ftp security
extensions.
Re-added the clear text handling in sec_recv.
Curl_sec_login was returning the opposite result that the code in ftp.c
was expecting. Simplified the return code (using a CURLcode) so to see
more clearly what is going on.
The functions Curl_disconnect() and Curl_done() are both used within the
scope of a single request so they cannot be allowed to use
Curl_expire(... 0) to kill all timeouts as there are some timeouts that
are set before a request that are supposed to remain until the request
is done.
The timeouts are now instead cleared at curl_easy_cleanup() and when the
multi state machine changes a handle to the complete state.
The date format in RFC822 allows that the seconds part of HH:MM:SS is
left out, but this function didn't allow it. This change also includes a
modified test case that makes sure that this now works.
Reported by: Matt Ford
Bug: http://curl.haxx.se/bug/view.cgi?id=3076529
tftpd-hpa has a bug where it will send an incorrect ack when the block
counter wraps and tftp options have been sent. Work around that by
accepting an ack for 65535 when we're expecting one for 0.
- |fd| is now a curl_socket_t and |len| a size_t to avoid conversions.
- Added 2 FIXMEs about the 2 unsigned -> signed conversions.
- Included 2 minor changes to Curl_sec_end.
- Renamed it to do_sec_send as it is the function doing the actual
transfer.
- Do not return any values as no one was checking it and it never
reported a failure (added a FIXME about checking for errors).
- Renamed the variables to make their use more specific.
- Removed some casts (int -> curl_socket_t, ...)
- Avoid doing the htnl <-> nthl twice by caching the 2 results.
- Renamed the variables name to better match their intend.
- Unified the |decoded_len| checks.
- Added some FIXMEs to flag some improvement that did not go in this
change.
- Removed sec_prot_internal as it is now inlined in the function (this removed
a redundant check).
- Changed the prototype to return an error code.
- Updated the method to use the new ftp_send_command function.
- Added a level_to_char helper method to avoid relying on the compiler's
bound checks. This default to the maximum security we have in case of a
wrong input.
Tighten the type of the |data| parameter to avoid a cast. Also made
it const as we should not modify it.
Added a DEBUGASSERT on the size to be written while changing it.
To do so, made block_read call Curl_read_plain instead of read.
While changing them renamed block_read to socket_read and sec_get_data
to read_data to better match their function.
Also fixed a potential memory leak in block_read.
Obviously, browsers ignore a colon without a following port number. Both
Firefox and Chrome just removes the colon for such URLs. This change
does not remove the colon for URLs sent over a HTTP proxy, so we should
consider doing that change as well.
Reported by: github user 'kreshano'
curl_easy_duphandle() was not properly duping the ares channel. The
ares_dup() function was introduced in c-ares 1.6.0 so by starting to use
this function we also raise the bar and require c-ares >= 1.6.0
(released Dec 9, 2008) for such builds.
Reported by: Ning Dong
Bug: http://curl.haxx.se/mail/lib-2010-08/0318.html
If built without HTTP or proxy support it would cause a compiler warning
due to the unused variable. I moved the declaration of it into the only
scope it is used.
bool_false is the internal name used in the setup_once.h definition
we fall back to for non-C99 non-stdbool systems, it's not the actual
name to use in assignments (we use bool_false, bool_true there to
avoid global namespace problems, see comment in setup_once.h).
The correct C99 value to use is 'false', but let's use FALSE as
used elsewhere when assigning to bits.close. FALSE is set equal
to 'false' in setup_once.h when possible.
This fixes a build problem on C99 targets.
As of curl-7.21.1 tunnelling ldap queries through HTTP Proxies is not
supported. Actually if --proxytunnel command-line option (or equivalent
CURLOPT_HTTPPROXYTUNNEL) is used for ldap queries like
ldap://ldap.my.server.com/... You are unable to successfully execute the
query. In facts ldap_*_bind is executed directly against the ldap server
and proxy is totally ignored. This is true for both openLDAP and
Microsoft LDAP API.
Step to reproduce the error:
Just launch "curl --proxytunnel --proxy 192.168.1.1:8080
ldap://ldap.my.server.com/dc=... "
This fix adds an invocation to Curl_proxyCONNECT against the provided
proxy address and on successful "CONNECT" it tunnels ldap query to the
final ldap server through the HTTP proxy. As far as I know Microsoft
LDAP APIs don't permit tunnelling in any way so the patch provided is
for OpenLDAP only. The patch has been developed against OpenLDAP 2.4.23
and has been tested with Microsoft ISA Server 2006 and works properly
with basic, digest and NTLM authentication.
Rodric provide an awesome recipe that proved libcurl didn't timeout at
the requested time - it instead often timed out at [connect time] +
[timeout time] instead of the documented and intended [timeout time]
only. This bug was due to the code using the wrong base offset when
comparing against "now". I could also take the oppurtinity to simplify
the code by properly using of the generic help function for this:
Curl_timeleft.
Reported by: Rodric Glaser
Bug: http://curl.haxx.se/bug/view.cgi?id=3061535
As this function uses return code 0 to mean that there is no timeout, it
needs to check that it doesn't return a time left value that is exactly
zero. It could lead to libcurl doing an extra 1000 ms select() call and
thus not timing out as accurately as it should.
I fell over this bug when working on the bug 3061535 but this fix does
not correct that problem alone, although this is a problem that needs to
be fixed.
Reported by: Rodric Glaser
Bug: http://curl.haxx.se/bug/view.cgi?id=3061535
The timeout is set for the connect phase already at the start of the
request so we should not add a new one, and we MUST not set expire to 0
as that will remove any other potentially existing timeouts.
The code reading chunked encoding attempts to rewind the code if it had
read more data than the chunky parser consumes. The rewinding can fail
and it will then cause an error. This change now makes the rewinding
only happen if pipelining is in use - as that's the only time it really
needs to be done.
Bug: http://curl.haxx.se/mail/lib-2010-08/0297.html
Reported by: Ron Parker
Curl_getconnectinfo() is changed to return a proper curl_socket_t for
the last socket so that it'll work more portably (and cause less
compiler warnings).
