This way, we always have exactly one slash after the host name, making
the tests pass when curl is compiled with the MSYS GCC.
Closes https://github.com/curl/curl/pull/4512
The MSYS system on Windows can run the test suite for curl built with
any toolset. When built with the MSYS GCC, curl uses Unix line endings,
while it uses Windows line endings when built with the MinGW GCC, and
`^O` reports 'msys' in both cases. Use the curl executable itself to
determine the line endings instead, which reports 'x86_64-pc-msys' when
built with the MSYS GCC.
Closes https://github.com/curl/curl/pull/4506
The URL extracted with CURLINFO_EFFECTIVE_URL was returned as given as
input in most cases, which made it not get a scheme prefixed like before
if the URL was given without one, and it didn't remove dotdot sequences
etc.
Added test case 1907 to verify that this now works as intended and as
before 7.62.0.
Regression introduced in 7.62.0
Reported-by: Christophe Dervieux
Fixes#4491Closes#4493
This should again enable crazy-large download ranges of the style
[1-10000000] that otherwise easily ran out of memory starting in 7.66.0
when this new handle allocating scheme was introduced.
Reported-by: Peter Sumatra
Fixes#4393Closes#4438
The 'share object' only sets the storage area for cookies. The "cookie
engine" still needs to be enabled or activated using the normal cookie
options.
This caused the curl command line tool to accidentally use cookies
without having been told to, since curl switched to using shared cookies
in 7.66.0.
Test 1166 verifies
Updated test 506
Fixes#4429Closes#4434
The parser would check for a query part before fragment, which caused it
to do wrong when the fragment contains a question mark.
Extended test 1560 to verify.
Reported-by: Alex Konev
Fixes#4412Closes#4413
CURLU_NO_AUTHORITY is intended for use with unknown schemes (i.e. not
"file:///") to override cURL's default demand that an authority exists.
Closes#4349
Added unit test case 1655 to verify.
Close#4352
the code correctly finds the flaws in the old code,
if one temporarily restores doh.c to the old version.
This is a protocol violation but apparently there are legacy proprietary
servers doing this.
Added test 336 and 337 to verify.
Reported-by: Philippe Marguinaud
Closes#4339
It needs to parse correctly. Otherwise it could be tricked into letting
through a-f using host names that libcurl would then resolve. Like
'[ab.be]'.
Reported-by: Thomas Vegas
Closes#4315
This allows the function to figure out if a unix domain socket has a
file name or not associated with it! When a socket is created with
socketpair(), as done in the fuzzer testing, the path struct member is
uninitialized and must not be accessed.
Bug: https://crbug.com/oss-fuzz/16699Closes#4283
Double-underscored or underscore plus uppercase letter at least.
... as they're claimed to be reserved.
Reported-by: patnyb on github
Fixes#4254Closes#4255
When a username and password are provided in the URL, they were wrongly
removed from the stored URL so that subsequent uses of the same URL
wouldn't find the crendentials. This made doing HTTP auth with multiple
connections (like Digest) mishave.
Regression from 46e164069d (7.62.0)
Test case 335 added to verify.
Reported-by: Mike Crowe
Fixes#4228Closes#4229
So that users can mask in/out specific HTTP versions when Alt-Svc is
used.
- Removed "h2c" and updated test case accordingly
- Changed how the altsvc struct is laid out
- Added ifdefs to make the unittest run even in a quiche-tree
Closes#4201
This is only the libcurl part that provides the information. There's no
user of the parsed value. This change includes three new tests for the
parser.
Ref: #3794
- Change data and protocol sections to CRLF line endings.
Prior to this change the tests would fail or hang, which is because
certain sections such as protocol require CRLF line endings.
Follow-up to grandparent commit which added the tests.
Ref: https://github.com/curl/curl/issues/3653
Ref: https://github.com/curl/curl/pull/3790
NOTE: This commit was cherry-picked and is part of a series of commits
that added the authzid feature for upcoming 7.66.0. The series was
temporarily reverted in db8ec1f so that it would not ship in a 7.65.x
patch release.
Closes https://github.com/curl/curl/pull/4186
Repeatedly we see problems where using curl_multi_wait() is difficult or
just awkward because if it has no file descriptor to wait for
internally, it returns immediately and leaves it to the caller to wait
for a small amount of time in order to avoid occasional busy-looping.
This is often missed or misunderstood, leading to underperforming
applications.
This change introduces curl_multi_poll() as a replacement drop-in
function that accepts the exact same set of arguments. This function
works identically to curl_multi_wait() - EXCEPT - for the case when
there's nothing to wait for internally, as then this function will by
itself wait for a "suitable" short time before it returns. This
effectiely avoids all risks of busy-looping and should also make it less
likely that apps "over-wait".
This also changes the curl tool to use this funtion internally when
doing parallel transfers and changes curl_easy_perform() to use it
internally.
Closes#4163
As the plan has been laid out in DEPRECATED. Update docs accordingly and
verify in test 1174. Now requires the option to be set to allow HTTP/0.9
responses.
Closes#4191
Allow pretty much anything to be part of the ALPN identifier. In
particular minus, which is used for "h3-20" (in-progress HTTP/3
versions) etc.
Updated test 356.
Closes#4182
If HTTPAUTH_GSSNEGOTIATE was used for a POST request and
gss_init_sec_context() failed, the POST request was sent
with empty body. This commit also restores the original
behavior of `curl --fail --negotiate`, which was changed
by commit 6c60355323.
Add regression tests 2077 and 2078 to cover this.
Fixes#3992Closes#4171
... to avoid integer overflows later when multiplying with 1000 to
convert seconds to milliseconds.
Added test 1269 to verify.
Reported-by: Jason Lee
Closes#4166
If using the read callback for HTTP_POST, and POSTFIELDSIZE is not set,
automatically add a Transfer-Encoding: chunked header, same as it is
already done for HTTP_PUT, HTTP_POST_FORM and HTTP_POST_MIME. Update
test 1514 according to the new behaviour.
Closes#4138
This is done by making sure each individual transfer is first added to a
linked list as then they can be performed serially, or at will, in
parallel.
Closes#3804
The testcase ensures that redirects to CURLPROTO_GOPHER won't be
allowed, by default, in the future. Also, curl is being used
for convenience while keeping the testcases DRY.
The expected error code is CURLE_UNSUPPORTED_PROTOCOL when the client is
redirected to CURLPROTO_GOPHER
Signed-off-by: Linos Giannopoulos <lgian@skroutz.gr>
With CURLOPT_TIMECONDITION set, a header is automatically added (e.g.
If-Modified-Since). Allow this to be replaced or suppressed with
CURLOPT_HTTPHEADER.
Fixes#4103Closes#4109
smbserver.py/dictserver.py were explicitly using localhost/127.0.0.1 for
binding the server which when we were running the tests with a separate
HOSTIP and CLIENTIP had failures verifying the server from the device we
were testing.
This changes them to take the address from runtests.py and default to
localhost/127.0.0.1 if none is given.
Closes#4048
Make '-k' a no-op. The singletest function now clears the log directory
BEFORE each individual test and not after, which makes it possible to
always keep the logfiles around after a test has been run. No need to
specify -k anymore. Keeping the option parsing around to work with users
of old habits.
Some tests also didn't work properly when -k was used (since the old
logs would be kep when a new test starts) which this change also fixes.
Closes#4035
... so that runtests can skip individual test cases that test features
that are explicitly disabled in this build. This new logic is intended
for disabled features that aren't otherwise easily visible through the
curl_version_info() or other API calls.
tests/server/disabled is a newly built executable that will output a
list of disabled features. Outputs nothing for a default build.
Closes#3950
Remove support for, references to and use of "cyaSSL" from the source
and docs. wolfSSL is the current name and there's no point in keeping
references to ancient history.
Assisted-by: Daniel Gustafsson
Closes#3903
Responses with status codes 1xx, 204 or 304 don't have a response body. For
these, don't parse these headers:
- Content-Encoding
- Content-Length
- Content-Range
- Last-Modified
- Transfer-Encoding
This change ensures that HTTP/2 upgrades work even if a
"Content-Length: 0" or a "Transfer-Encoding: chunked" header is present.
Co-authored-by: Daniel Stenberg
Closes#3702Fixes#3968Closes#3977
- Revert all commits related to the SASL authzid feature since the next
release will be a patch release, 7.65.1.
Prior to this change CURLOPT_SASL_AUTHZID / --sasl-authzid was destined
for the next release, assuming it would be a feature release 7.66.0.
However instead the next release will be a patch release, 7.65.1 and
will not contain any new features.
After the patch release after the reverted commits can be restored by
using cherry-pick:
git cherry-pick a14d72ca9499ff8c1cc36c2a8d520edf690
Details for all reverted commits:
Revert "os400: take care of CURLOPT_SASL_AUTHZID in curl_easy_setopt_ccsid()."
This reverts commit 0edf6907ae.
Revert "tests: Fix the line endings for the SASL alt-auth tests"
This reverts commit c2a8d52a13.
Revert "examples: Added SASL PLAIN authorisation identity (authzid) examples"
This reverts commit 8c1cc369d0.
Revert "curl: --sasl-authzid added to support CURLOPT_SASL_AUTHZID from the tool"
This reverts commit a9499ff136.
Revert "sasl: Implement SASL authorisation identity via CURLOPT_SASL_AUTHZID"
This reverts commit a14d72ca2f.
- Change data and protocol sections to CRLF line endings.
Prior to this change the tests would fail or hang, which is because
certain sections such as protocol require CRLF line endings.
Follow-up to a9499ff from today which added the tests.
Ref: https://github.com/curl/curl/pull/3790
They serve very little purpose and mostly just add noise. Most of them
have been around for a very long time. I read them all before removing
or rephrasing them.
Ref: #3876Closes#3883
Codacy/CppCheck warns about this. Consistently use parentheses as we
already do in some places to silence the warning.
Closes https://github.com/curl/curl/pull/3866
This reverts commit b0972bc.
- No longer show verbose output for the conncache closure handle.
The offending commit was added so that the conncache closure handle
would inherit verbose mode from the user's easy handle. (Note there is
no way for the user to set options for the closure handle which is why
that was necessary.) Other debug settings such as the debug function
were not also inherited since we determined that could lead to crashes
if the user's per-handle private data was used on an unexpected handle.
The reporter here says he has a debug function to capture the verbose
output, and does not expect or want any output to stderr; however
because the conncache closure handle does not inherit the debug function
the verbose output for that handle does go to stderr.
There are other plausible scenarios as well such as the user redirects
stderr on their handle, which is also not inherited since it could lead
to crashes when used on an unexpected handle.
Short of allowing the user to set options for the conncache closure
handle I don't think there's much we can safely do except no longer
inherit the verbose setting.
Bug: https://curl.haxx.se/mail/lib-2019-05/0021.html
Reported-by: Kristoffer Gleditsch
Ref: https://github.com/curl/curl/pull/3598
Ref: https://github.com/curl/curl/pull/3618
Closes https://github.com/curl/curl/pull/3856
... to make the host name "usable". Store the scope id and put it back
when extracting a URL out of it.
Also makes curl_url_set() syntax check CURLUPART_HOST.
Fixes#3817Closes#3822
This limits all accepted input strings passed to libcurl to be less than
CURL_MAX_INPUT_LENGTH (8000000) bytes, for these API calls:
curl_easy_setopt() and curl_url_set().
The 8000000 number is arbitrary picked and is meant to detect mistakes
or abuse, not to limit actual practical use cases. By limiting the
acceptable string lengths we also reduce the risk of integer overflows
all over.
NOTE: This does not apply to `CURLOPT_POSTFIELDS`.
Test 1559 verifies.
Closes#3805
RFC 4616 specifies the authzid is optional in the client authentication
message and that the server will derive the authorisation identity
(authzid) from the authentication identity (authcid) when not specified
by the client.
Make sure to run curl_global_cleanup() when shutting down the test
suite to release any resources allocated in the SSL setup. This is
clearly visible when running tests with PolarSSL where the thread
lock calloc() memory which isn't released when not running cleanup.
Below is an excerpt from the autobuild logs:
==12368== 96 bytes in 1 blocks are possibly lost in loss record 1 of 2
==12368== at 0x4837B65: calloc (vg_replace_malloc.c:752)
==12368== by 0x11A76E: curl_dbg_calloc (memdebug.c:205)
==12368== by 0x145CDF: Curl_polarsslthreadlock_thread_setup
(polarssl_threadlock.c:54)
==12368== by 0x145B37: Curl_polarssl_init (polarssl.c:865)
==12368== by 0x14129D: Curl_ssl_init (vtls.c:171)
==12368== by 0x118B4C: global_init (easy.c:158)
==12368== by 0x118BF5: curl_global_init (easy.c:221)
==12368== by 0x118D0B: curl_easy_init (easy.c:299)
==12368== by 0x114E96: test (lib1906.c:32)
==12368== by 0x115495: main (first.c:174)
Closes#3783
Reviewed-by: Marcel Raad <Marcel.Raad@teamviewer.com>
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
