Allow pretty much anything to be part of the ALPN identifier. In
particular minus, which is used for "h3-20" (in-progress HTTP/3
versions) etc.
Updated test 356.
Closes#4182
If HTTPAUTH_GSSNEGOTIATE was used for a POST request and
gss_init_sec_context() failed, the POST request was sent
with empty body. This commit also restores the original
behavior of `curl --fail --negotiate`, which was changed
by commit 6c60355323.
Add regression tests 2077 and 2078 to cover this.
Fixes#3992Closes#4171
It was used (intended) to pass in the size of the 'socks' array that is
also passed to these functions, but was rarely actually checked/used and
the array is defined to a fixed size of MAX_SOCKSPEREASYHANDLE entries
that should be used instead.
Closes#4169
... to make CURLOPT_MAX_RECV_SPEED_LARGE and
CURLOPT_MAX_SEND_SPEED_LARGE work correctly on subsequent transfers that
reuse the same handle.
Fixed-by: Ironbars13 on github
Fixes#4084Closes#4161
If using the read callback for HTTP_POST, and POSTFIELDSIZE is not set,
automatically add a Transfer-Encoding: chunked header, same as it is
already done for HTTP_PUT, HTTP_POST_FORM and HTTP_POST_MIME. Update
test 1514 according to the new behaviour.
Closes#4138
- In curl_easy_reset attempt to resize the receive buffer to its default
size. If realloc fails then continue using the previous size.
Prior to this change curl_easy_reset did not properly handle resetting
the receive buffer (data->state.buffer). It reset the variable holding
its size (data->set.buffer_size) to the default size (READBUFFER_SIZE)
but then did not actually resize the buffer. If a user resized the
buffer by using CURLOPT_BUFFERSIZE to set the size smaller than the
default, later called curl_easy_reset and attempted to reuse the handle
then a heap overflow would very likely occur during that handle's next
transfer.
Reported-by: Felix Hädicke
Fixes https://github.com/curl/curl/issues/4143
Closes https://github.com/curl/curl/pull/4145
Specifying O_APPEND in conjunction with O_TRUNC and O_CREAT does not
make much sense. And this combination of flags is not accepted by all
SFTP servers (at least not Apache SSHD).
Fixes#4147Closes#4148
Curl_disconnect bails out if conn->easyq is not empty, detach_connection
needs to be called first to remove the current easy from the queue.
Fixes#4144Closes#4151
USe configure --with-ngtcp2 or --with-quiche
Using either option will enable a HTTP3 build.
Co-authored-by: Alessandro Ghedini <alessandro@ghedini.me>
Closes#3500
Several reasons:
- we can't add everyone who's helping out so its unfair to just a few
selected ones.
- we already list all helpers in THANKS and in RELEASE-NOTES for each
release
- we don't want to give the impression that some parts of the code is
"owned" or "controlled" by specific persons
Assisted-by: Daniel Gustafsson
Closes#4129
PK11_IsPresent() checks for the token for the given slot is available,
and sets needlogin flags for the PK11_Authenticate() call. Should it
return false, we should however treat it as an error and bail out.
Closes https://github.com/curl/curl/pull/4110
All protocols except for CURLPROTO_FILE/CURLPROTO_SMB and their TLS
counterpart were allowed for redirect. This vastly broadens the
exploitation surface in case of a vulnerability such as SSRF [1], where
libcurl-based clients are forced to make requests to arbitrary hosts.
For instance, CURLPROTO_GOPHER can be used to smuggle any TCP-based
protocol by URL-encoding a payload in the URI. Gopher will open a TCP
connection and send the payload.
Only HTTP/HTTPS and FTP are allowed. All other protocols have to be
explicitly enabled for redirects through CURLOPT_REDIR_PROTOCOLS.
[1]: https://www.acunetix.com/blog/articles/server-side-request-forgery-vulnerability/
Signed-off-by: Linos Giannopoulos <lgian@skroutz.gr>
Closes#4094
With CURLOPT_TIMECONDITION set, a header is automatically added (e.g.
If-Modified-Since). Allow this to be replaced or suppressed with
CURLOPT_HTTPHEADER.
Fixes#4103Closes#4109
- Return CURLE_REMOTE_ACCESS_DENIED for SMB access denied on file open.
Prior to this change CURLE_REMOTE_FILE_NOT_FOUND was returned instead.
Closes https://github.com/curl/curl/pull/4095
There were a leftover few prototypes of Curl_ functions that we used to
export but no longer do, this removes those prototypes and cleans up any
comments still referring to them.
Curl_write32_le(), Curl_strcpy_url(), Curl_strlen_url(), Curl_up_free()
Curl_concat_url(), Curl_detach_connnection(), Curl_http_setup_conn()
were made static in 05b100aee2.
Curl_http_perhapsrewind() made static in 574aecee20.
For the remainder, I didn't trawl the Git logs hard enough to capture
their exact time of deletion, but they were all gone: Curl_splayprint(),
Curl_http2_send_request(), Curl_global_host_cache_dtor(),
Curl_scan_cache_used(), Curl_hostcache_destroy(), Curl_second_connect(),
Curl_http_auth_stage() and Curl_close_connections().
Closes#4096
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
The file suffix for dynamically loadable objects on macOS is .dylib,
which need to be added for the module definitions in order to get the
NSS TLS backend to work properly on macOS.
Closes https://github.com/curl/curl/pull/4046
The value of the maxPTDs parameter to PR_Init() has since at least
NSPR 2.1, which was released sometime in 1998, been marked ignored
as is accordingly not used in the initialization code. Setting it
to a value when calling PR_Init() is thus benign, but indicates an
intent which may be misleading. Reset the value to zero to improve
clarity.
Closes https://github.com/curl/curl/pull/4054
Change the logic around such that we only keep CRLs that NSS actually
ended up caching around for later deletion. If CERT_CacheCRL() fails
then there is little point in delaying the freeing of the CRL as it
is not used.
Closes https://github.com/curl/curl/pull/4053
Some editors and IDEs assume that source files use UTF-8 file encodings.
It also fixes the build with MSVC when /utf-8 command line option is
used (this option is mandatory for some other open-source projects, this
is useful when using the same options is desired for building all
libraries of a project).
Closes https://github.com/curl/curl/pull/4087
... since that needs UI_OpenSSL() which isn't provided when OpenSSL is
built with OPENSSL_NO_UI_CONSOLE which happens when OpenSSL is built for
UWP (with "VC-WIN32-UWP").
Reported-by: Vasily Lobaskin
Fixes#4073Closes#4077
The header buffer size calculation can from static analysis seem to
overlow as it performs an addition between two size_t variables and
stores the result in a size_t variable. Overflow is however guarded
against elsewhere since the input to the addition is regulated by
the maximum read buffer size. Clarify this with a comment since the
question was asked.
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
To make sure a HTTP/2 stream registers the end of stream.
Bug #4043 made me find this problem but this fix doesn't correct the
reported issue.
Closes#4068
Certinfo gives the same result for all OpenSSL versions.
Also made printing RSA pubkeys consistent with older versions.
Reported-by: Michael Wallner
Fixes#3706Closes#4030
OpenSSL used to call exit(1) on syntax errors in OPENSSL_config(),
which is why we switched to CONF_modules_load_file() and introduced
a comment stating why. This behavior was however changed in OpenSSL
commit abdd677125f3a9e3082f8c5692203590fdb9b860, so remove the now
outdated and incorrect comment. The mentioned commit also declares
OPENSSL_config() deprecated so keep the current coding.
Closes#4033
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Even though the variable was used in a DEBUGASSERT, GCC 8 warned in
debug mode:
krb5.c:324:17: error: unused variable 'maj' [-Werror=unused-variable]
Just suppress the warning and declare the variable unconditionally
instead of only for DEBUGBUILD (which also missed the check for
HAVE_ASSERT_H).
Closes https://github.com/curl/curl/pull/4020
- The transfer hashes weren't using the correct keys so removing entries
failed.
- Simplified the iteration logic over transfers sharing the same socket and
they now simply are set to expire and thus get handled in the "regular"
timer loop instead.
Reported-by: Tom van der Woerdt
Fixes#4012Closes#4014
Old connections are meant to expire from the connection cache after
CURLOPT_MAXAGE_CONN seconds. However, they actually expire after 1000x
that value. This occurs because a time value measured in milliseconds is
accidentally divided by 1M instead of by 1,000.
Closes https://github.com/curl/curl/pull/4013
Remove support for, references to and use of "cyaSSL" from the source
and docs. wolfSSL is the current name and there's no point in keeping
references to ancient history.
Assisted-by: Daniel Gustafsson
Closes#3903
Since more than one socket can be used by each transfer at a given time,
each sockhash entry how has its own hash table with transfers using that
socket.
In addition, the sockhash entry can now be marked 'blocked = TRUE'"
which then makes the delete function just set 'removed = TRUE' instead
of removing it "for real", as a way to not rip out the carpet under the
feet of a parent function that iterates over the transfers of that same
sockhash entry.
Reported-by: Tom van der Woerdt
Fixes#3961Fixes#3986Fixes#3995Fixes#4004Closes#3997
... so that timeouts or other state machine actions get going again
after a changing pause state. For example, if the last delivery was
paused there's no pending socket activity.
Reported-by: sstruchtrup on github
Fixes#3994Closes#4001
Responses with status codes 1xx, 204 or 304 don't have a response body. For
these, don't parse these headers:
- Content-Encoding
- Content-Length
- Content-Range
- Last-Modified
- Transfer-Encoding
This change ensures that HTTP/2 upgrades work even if a
"Content-Length: 0" or a "Transfer-Encoding: chunked" header is present.
Co-authored-by: Daniel Stenberg
Closes#3702Fixes#3968Closes#3977
An inner loop within the singlesocket() function wrongly re-used the
variable for the outer loop which then could cause an infinite
loop. Change to using a separate variable!
Reported-by: Eric Wu
Fixes#3970Closes#3973
Various functions called within Curl_http2_done() can have the
side-effect of setting the Easy connection into drain mode (by calling
drain_this()). However, the last time we unset this for a transfer (by
calling drained_transfer()) is at the beginning of Curl_http2_done().
If the Curl_easy is reused for another transfer, it is then stuck in
drain mode permanently, which in practice makes it unable to write any
data in the new transfer.
This fix moves the last call to drained_transfer() to later in
Curl_http2_done(), after the functions that could potentially call for a
drain.
Fixes#3966Closes#3967
Reported-by: Josie-H
This fixes the static dependency on iphlpapi.lib and allows curl to
build for targets prior to Windows Vista.
This partially reverts 170bd047.
Fixes#3960Closes#3958
... so that it has a sensible value when ConnectionExists() is called which
needs it set to differentiate host "bundles" correctly on port number!
Also, make conncache:hashkey() use correct port for bundles that are proxy vs
host connections.
Probably a regression from 7.62.0
Reported-by: Tom van der Woerdt
Fixes#3956Closes#3957
Only HTTP proxy use where multiple host names can be used over the same
connection should use the proxy host name for bundles.
Reported-by: Tom van der Woerdt
Fixes#3951Closes#3955
They need to be removed from the socket hash linked list with more care.
When sh_delentry() is called to remove a sockethash entry, remove all
individual transfers from the list first. To enable this, each Curl_easy struct
now stores a pointer to the sockethash entry to know how to remove itself.
Reported-by: Tom van der Woerdt and Kunal Ekawde
Fixes#3952Fixes#3904Closes#3953
Microsoft added support for Unix Domain Sockets in Windows 10 1803
(RS4). Rather than expect the user to enable Unix Domain Sockets by
uncommenting the #define that was added in 0fd6221f we use the RS4
pre-processor variable that is present in newer versions of the
Windows SDK.
Closes#3939
- Revert all commits related to the SASL authzid feature since the next
release will be a patch release, 7.65.1.
Prior to this change CURLOPT_SASL_AUTHZID / --sasl-authzid was destined
for the next release, assuming it would be a feature release 7.66.0.
However instead the next release will be a patch release, 7.65.1 and
will not contain any new features.
After the patch release after the reverted commits can be restored by
using cherry-pick:
git cherry-pick a14d72ca9499ff8c1cc36c2a8d520edf690
Details for all reverted commits:
Revert "os400: take care of CURLOPT_SASL_AUTHZID in curl_easy_setopt_ccsid()."
This reverts commit 0edf6907ae.
Revert "tests: Fix the line endings for the SASL alt-auth tests"
This reverts commit c2a8d52a13.
Revert "examples: Added SASL PLAIN authorisation identity (authzid) examples"
This reverts commit 8c1cc369d0.
Revert "curl: --sasl-authzid added to support CURLOPT_SASL_AUTHZID from the tool"
This reverts commit a9499ff136.
Revert "sasl: Implement SASL authorisation identity via CURLOPT_SASL_AUTHZID"
This reverts commit a14d72ca2f.
This reverts commit 3b06e68b77.
Clearly this change wasn't good enough as it broke CURLOPT_LOW_SPEED_LIMIT +
CURLOPT_LOW_SPEED_TIME
Reported-by: Dave Reisner
Fixes#3927Closes#3928
Added the ability for the calling program to specify the authorisation
identity (authzid), the identity to act as, in addition to the
authentication identity (authcid) and password when using SASL PLAIN
authentication.
Fixed#3653Closes#3790
If the proxy string is given as an IPv6 numerical address with a zone
id, make sure to use that for the connect to the proxy.
Reported-by: Edmond Yu
Fixes#3482Closes#3918
When running a multi TLS backend build the version string needs more
buffer space. Make the internal ssl_buffer stack buffer match the one
in Curl_multissl_version() to allow for the longer string. For single
TLS backend builds there is no use in extended to buffer. This is a
fallout from #3863 which fixes up the multi_ssl string generation to
avoid a buffer overflow when the buffer is too small.
Closes#3875
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Currently when the server responds with 401 on NTLM authenticated
connection (re-used) we consider it to have failed. However this is
legitimate and may happen when for example IIS is set configured to
'authPersistSingleRequest' or when the request goes thru a proxy (with
'via' header).
Implemented by imploying an additional state once a connection is
re-used to indicate that if we receive 401 we need to restart
authentication.
Missed in fe6049f0.
They serve very little purpose and mostly just add noise. Most of them
have been around for a very long time. I read them all before removing
or rephrasing them.
Ref: #3876Closes#3883
Given that Curl_disconnect() calls Curl_http_auth_cleanup_ntlm() prior
to calling conn_shutdown() and it in turn performs this, there is no
need to perform the same action in conn_shutdown().
Closes#3881
In Curl_multissl_version() it was possible to overflow the passed in
buffer if the generated version string exceeded the size of the buffer.
Fix by inverting the logic, and also make sure to not exceed the local
buffer during the string generation.
Closes#3863
Reported-by: nevv on HackerOne/curl
Reviewed-by: Jay Satiro
Reviewed-by: Daniel Stenberg
Codacy/CppCheck warns about this. Consistently use parentheses as we
already do in some places to silence the warning.
Closes https://github.com/curl/curl/pull/3866
Due to limitations in Curl_resolver_wait_resolv(), it doesn't work for
DOH resolves. This fix disables DOH for those.
Limitation added to KNOWN_BUGS.
Fixes#3850Closes#3857
This reverts commit b0972bc.
- No longer show verbose output for the conncache closure handle.
The offending commit was added so that the conncache closure handle
would inherit verbose mode from the user's easy handle. (Note there is
no way for the user to set options for the closure handle which is why
that was necessary.) Other debug settings such as the debug function
were not also inherited since we determined that could lead to crashes
if the user's per-handle private data was used on an unexpected handle.
The reporter here says he has a debug function to capture the verbose
output, and does not expect or want any output to stderr; however
because the conncache closure handle does not inherit the debug function
the verbose output for that handle does go to stderr.
There are other plausible scenarios as well such as the user redirects
stderr on their handle, which is also not inherited since it could lead
to crashes when used on an unexpected handle.
Short of allowing the user to set options for the conncache closure
handle I don't think there's much we can safely do except no longer
inherit the verbose setting.
Bug: https://curl.haxx.se/mail/lib-2019-05/0021.html
Reported-by: Kristoffer Gleditsch
Ref: https://github.com/curl/curl/pull/3598
Ref: https://github.com/curl/curl/pull/3618
Closes https://github.com/curl/curl/pull/3856
Older versions of OpenSSL report FIPS availabilty via an OPENSSL_FIPS
define. It uses this define to determine whether to publish -fips at
the end of the version displayed. Applications that utilize the version
reported by OpenSSL will see a mismatch if they compare it to what curl
reports, as curl is not modifying the version in the same way. This
change simply adds a check to see if OPENSSL_FIPS is defined, and will
alter the reported version to match what OpenSSL itself provides. This
only appears to be applicable in versions of OpenSSL <1.1.1
Closes#3771
Currently you can do things like --cert <(cat ./cert.crt) with (at least) the
openssl backend, but that doesn't work for nss because is_file rejects fifos.
I don't actually know if this is sufficient, nss might do things internally
(like seeking back) that make this not work, so actual testing is needed.
Closes#3807
... to make the host name "usable". Store the scope id and put it back
when extracting a URL out of it.
Also makes curl_url_set() syntax check CURLUPART_HOST.
Fixes#3817Closes#3822
As soon as a TLS backend gets ALPN conformation about the specific HTTP
version it can now set the multiplex situation for the "bundle" and
trigger moving potentially queued up transfers to the CONNECT state.
With transfers being queued up, we only move one at a a time back to the
CONNECT state but now we mark moved transfers so that when a moved
transfer is confirmed "successful" (it connected) it will trigger the
move of another pending transfer. Previously, it would otherwise wait
until the transfer was done before doing this. This makes queued up
pending transfers get processed (much) faster.
In case the name pointer isn't set (due to memory pressure most likely)
we need to skip the prefix matching and reject with a badcookie to avoid
a possible NULL pointer dereference.
Closes#3820#3821
Reported-by: Jonathan Moerman
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
This limits all accepted input strings passed to libcurl to be less than
CURL_MAX_INPUT_LENGTH (8000000) bytes, for these API calls:
curl_easy_setopt() and curl_url_set().
The 8000000 number is arbitrary picked and is meant to detect mistakes
or abuse, not to limit actual practical use cases. By limiting the
acceptable string lengths we also reduce the risk of integer overflows
all over.
NOTE: This does not apply to `CURLOPT_POSTFIELDS`.
Test 1559 verifies.
Closes#3805
Just like we do for mbed TLS, use our local implementation of MD4 when
OpenSSL doesn't support it. This allows a type-3 message to include the
NT response.
RFC 4616 specifies the authzid is optional in the client authentication
message and that the server will derive the authorisation identity
(authzid) from the authentication identity (authcid) when not specified
by the client.
ALTSVC requires Curl_get_line which is defined in lib/cookie.c inside a #if
check of HTTP and COOKIES. That makes Curl_get_line undefined if COOKIES is
disabled. Fix by splitting out the function into a separate file which can
be included where needed.
Closes#3717
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Marcel Raad <Marcel.Raad@teamviewer.com>
The indentation from 211d5329 and 57d6d253 was a little strange as
parts didn't align correctly, uses 4 spaces rather than 2. Checked
the indentation of the original source so it aligns, albeit, using
curl style.
Commit 9081014 fixed most of the confusing issues between scope id and
scope however 844896d added bad limits checking assuming that the scope
is being set and not the scope id.
I have fixed the documentation so it all refers to scope ids.
In addition Curl_if2ip refered to the scope id as remote_scope_id which
is incorrect, so I renamed it to local_scope_id.
Adjusted-by: Daniel Stenberg
Closes#3655Closes#3765Fixes#3713
Only allow well formed decimal numbers in the input.
Document that the number MUST be between 1 and 65535.
Add tests to test 1560 to verify the above.
Ref: https://github.com/curl/curl/issues/3753Closes#3762
Without this, detecting and avoid reusing a closed TLS connection
(without a previous GOAWAY) when doing HTTP/2 is tricky.
Reported-by: Tom van der Woerdt
Fixes#3750Closes#3763
Functionally this doesn't change anything as we still use the username
for both the authorisation identity and the authentication identity.
Closes#3757
Remove the code too. The functionality has been disabled in code since
7.62.0. Setting this option will from now on simply be ignored and have
no function.
Closes#3654
- remove unused variables
- declare conditionally used variables conditionally
- suppress unused variable warnings in the CMake tests
- remove dead variable stores
- consistently use WIN32 macro to detect Windows
Closes https://github.com/curl/curl/pull/3739
Make functions no-ops if neither both USE_THREADS_POSIX and
HAVE_PTHREAD_H nor both USE_THREADS_WIN32 and HAVE_PROCESS_H are
defined. Previously, if only one of them was defined, there was either
code compiled that did nothing useful or the wrong header included for
the functions used.
Also, move POLARSSL_MUTEX_T define to implementation file as it's not
used externally.
Closes https://github.com/curl/curl/pull/3739
Fixes#3745Closes#3746
The following snippet
```
int main()
{
CURL* hCurlHandle = curl_easy_init();
curl_easy_setopt(hCurlHandle, CURLOPT_URL, "http://example.com");
curl_easy_setopt(hCurlHandle, CURLOPT_PROXY, "1");
curl_easy_perform(hCurlHandle);
curl_easy_cleanup(hCurlHandle);
return 0;
}
```
triggers the following Valgrind warning
```
==4125== Invalid read of size 8
==4125== at 0x4E7D1EE: Curl_llist_remove (llist.c:97)
==4125== by 0x4E7EF5C: detach_connnection (multi.c:798)
==4125== by 0x4E80545: multi_runsingle (multi.c:1451)
==4125== by 0x4E8197C: curl_multi_perform (multi.c:2072)
==4125== by 0x4E766A0: easy_transfer (easy.c:625)
==4125== by 0x4E76915: easy_perform (easy.c:719)
==4125== by 0x4E7697C: curl_easy_perform (easy.c:738)
==4125== by 0x4008BE: main (in /home/even/curl/test)
==4125== Address 0x9b3d1d0 is 1,120 bytes inside a block of size 1,600 free'd
==4125== at 0x4C2ECF0: free (vg_replace_malloc.c:530)
==4125== by 0x4E62C36: conn_free (url.c:756)
==4125== by 0x4E62D34: Curl_disconnect (url.c:818)
==4125== by 0x4E48DF9: Curl_once_resolved (hostip.c:1097)
==4125== by 0x4E8052D: multi_runsingle (multi.c:1446)
==4125== by 0x4E8197C: curl_multi_perform (multi.c:2072)
==4125== by 0x4E766A0: easy_transfer (easy.c:625)
==4125== by 0x4E76915: easy_perform (easy.c:719)
==4125== by 0x4E7697C: curl_easy_perform (easy.c:738)
==4125== by 0x4008BE: main (in /home/even/curl/test)
==4125== Block was alloc'd at
==4125== at 0x4C2F988: calloc (vg_replace_malloc.c:711)
==4125== by 0x4E6438E: allocate_conn (url.c:1654)
==4125== by 0x4E685B4: create_conn (url.c:3496)
==4125== by 0x4E6968F: Curl_connect (url.c:4023)
==4125== by 0x4E802E7: multi_runsingle (multi.c:1368)
==4125== by 0x4E8197C: curl_multi_perform (multi.c:2072)
==4125== by 0x4E766A0: easy_transfer (easy.c:625)
==4125== by 0x4E76915: easy_perform (easy.c:719)
==4125== by 0x4E7697C: curl_easy_perform (easy.c:738)
==4125== by 0x4008BE: main (in /home/even/curl/test)
```
This has been bisected to commit 2f44e94
Fixes https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=14109
Credit to OSS Fuzz
Just remove the redundant condition, which also makes it clear that
k->buf is always 0-terminated if this break is not hit.
Closes https://github.com/curl/curl/pull/3732
- Fix clang string-plus-int warning.
Clang 8 warns about adding a string to an int does not append to the
string. Indeed it doesn't, but that was not the intention either. Use
array indexing as suggested to silence the warning. There should be no
functional changes.
(In other words clang warns about "foo"+2 but not &"foo"[2] so use the
latter.)
smtp.c:1221:29: warning: adding 'int' to a string does not append to the
string [-Wstring-plus-int]
eob = strdup(SMTP_EOB + 2);
~~~~~~~~~~~~~~~~^~~~
Closes https://github.com/curl/curl/pull/3729
