When getting multiple URLs, curl didn't properly reset the byte counter
after a successful transfer so if the subsequent transfer failed it
would wrongly use the previous byte counter and behave badly (segfault)
because of that. The code assumes that the byte counter and the 'stream'
pointer is well in synch.
Reported by: Jon Sargeant
Bug: http://curl.haxx.se/bug/view.cgi?id=3028241
When configured with '--without-ssl --with-nss', NTLM authentication
now uses NSS crypto library for MD5 and DES. For MD4 we have a local
implementation in that case. More details are available at
https://bugzilla.redhat.com/603783
In order to get it working, curl_global_init() must be called with
CURL_GLOBAL_SSL or CURL_GLOBAL_ALL. That's necessary because NSS needs
to be initialized globally and we do so only when the NSS library is
actually required by protocol. The mentioned call of curl_global_init()
is responsible for creating of the initialization mutex.
There was also slightly changed the NSS initialization scenario, in
particular, loading of the NSS PEM module. It used to be loaded always
right after the NSS library was initialized. Now the library is
initialized as soon as any SSL or NTLM is required, while the PEM module
is prevented from being loaded until the SSL is actually required.
curl didn't properly handle escaping characters in a URL with the use of
backslash. It did an attempt, but that failed as reported in bug
3022551. The described example was using the URL
"http://example.com?{AB,C\,D}".
I've now removed the special-handling of letters following the backslash
and I also removed the bad extra check that triggered this particular
bug.
Bug: http://curl.haxx.se/bug/view.cgi?id=3022551
Reported by: Jon Sargeant
Was seeing spurious SSL connection aborts using libcurl and
OpenSSL. I tracked it down to uncleared error state on the
OpenSSL error stack - patch attached deals with that.
Rough idea of problem:
Code that uses libcurl calls some library that uses OpenSSL but
don't clear the OpenSSL error stack after an error.
ssluse.c calls SSL_read which eventually gets an EWOULDBLOCK from
the OS. Returns -1 to indicate an error
ssluse.c calls SSL_get_error. First thing, SSL_get_error calls
ERR_get_error to check the OpenSSL error stack, finds an old
error and returns SSL_ERROR_SSL instead of SSL_ERROR_WANT_READ or
SSL_ERROR_WANT_WRITE.
ssluse.c returns an error and aborts the connection
Solution:
Clear the openssl error stack before calling SSL_* operation if
we're going to call SSL_get_error afterwards.
Notes:
This is much more likely to happen with multi because it's easier
to intersperse other calls to the OpenSSL library in the same
thread.
Enable OpenLDAP support for cygwin builds. This support was disabled back
in 2008 due to incompatibilities between OpenSSL and OpenLDAP headers.
cygwin's OpenSSL 0.9.8l and OpenLDAP 2.3.43 versions on cygwin 1.5.25
allow building an OpenLDAP enabled libcurl supporting back to Windows 95.
Remove non-functional CURL_LDAP_HYBRID code and references.
Jason McDonald posted bug report #3006786 when he found that the
SFTP code didn't timeout properly in several places in the code
even if a timeout was set properly.
Based on his suggested patch, I wrote a different implementation
that I think addressed the issue better and also uses the connect
timeout for the initial part of the SSH/SFTP done during the
"protocol connect" phase.
(http://curl.haxx.se/bug/view.cgi?id=3006786)
Igor Novoseltsev reported a problem with the multi socket API and
using timeouts and timers. It boiled down to a problem with
libcurl's use of GetTickCount() interally to figure out the
current time, while Igor's own application code used another
function call.
It made his app call the socket API timeout function a bit
_before_ libcurl would consider the timeout to trigger, and that
could easily lead to timeouts or stalls in the app. It seems
GetTickCount() in general often has no better resolution than
16ms and switching to the alternative function
QueryPerformanceCounter has its share of problems:
http://www.virtualdub.org/blog/pivot/entry.php?id=106
We address this problem by simply having libcurl treat timers
that already has occured or will occur within 40ms subject for
treatment. I'm confident that there are other implementations and
operating systems with similarly in accurate timer functions so
it makes sense to have applied generically and I don't believe we
sacrifice much by adding a 40ms inaccuracy on these timeouts.
makes the LDAP code much cleaner, nicer and in general being a
better libcurl citizen. If a new enough OpenLDAP version is
detect, the new and shiny lib/openldap.c code is then used
instead of the old cruft
Code by Howard, minor cleanups by Daniel.
In a normal expression, doing [unsigned short] + 1 will not wrap
at 16 bits so the comparisons and outputs were done wrong. I
added a macro do make sure it gets done right.
Douglas Kilpatrick filed bug report #3004787 about it:
http://curl.haxx.se/bug/view.cgi?id=3004787
Eric Mertens posted bug report #3003005 pointing out that the
libcurl TFTP code was not sending the timeout option properly to
the server, and suggested a fix.
(http://curl.haxx.se/bug/view.cgi?id=3003005)
John-Mark Bell filed bug #3000052 that identified a problem (with
an associated patch) with the OpenSSL handshake state machine
when the multi interface is used:
Performing an https request using a curl multi handle and using
select or epoll to wait for events results in a hang. It appears
that the cause is the fix for bug #2958179, which makes
ossl_connect_common unconditionally return from the step 2 loop
when fetching from a multi handle.
When ossl_connect_step2 has completed, it updates
connssl->connecting_state to ssl_connect_3. ossl_connect_common
will then return to the caller, as a multi handle is in
use. Eventually, the client code will call curl_multi_fdset to
obtain an updated fdset to select or epoll on. For https
requests, curl_multi_fdset will cause https_getsock to be called.
https_getsock will only return a socket handle if the
connecting_state is ssl_connect_2_reading or
ssl_connect_2_writing. Therefore, the client will never obtain a
valid fdset, and thus not drive the multi handle, resulting in a
hang.
(http://curl.haxx.se/bug/view.cgi?id=3000052)
Sebastian V reported bug #3000056 identifying a problem with
redirect following. It showed that when curl followed redirects
it didn't properly ignore the response body of the 30X response
if that response was using compressed Content-Encoding!
(http://curl.haxx.se/bug/view.cgi?id=3000056)
Dirk Manske reported a regression. When connecting with the multi
interface, there were situations where libcurl wouldn't store
connect time correctly as it used to (and is documented to) do.
Using his fine sample program we could repeat it, and I wrote up
test case 573 using that code. The problem does not easily show
itself using the local test suite though.
The fix, also as suggested by Dirk, is a bit on the ugly side as
it adds yet another call to Curl_verboseconnect() and setting the
TIMER_CONNECT time. That situation is subject for some closer
inspection in the future.
Prefixing the FTP quote commands with an asterisk really only
worked for the postquote actions. This is now fixed and test case
227 has been extended to verify.
Matt Wixson found and fixed a bug in the SCP/SFTP area where the
code treated a 0 return code from libssh2 to be the same as
EAGAIN while in reality it isn't. The problem caused a hang in
SFTP transfers from a MessageWay server.
Ben Greear brought a patch that from now on allows all protocols
to specify name and user within the URL, in the same manner HTTP
and FTP have been allowed to in the past - although far from all
of the libcurl supported protocols actually have that feature in
their URL definition spec.
Bob Richmond: There's an annoying situation where libcurl will
read new HTTP response data from a socket, then check if it's a
timeout if one is set. If the last packet received constitutes
the end of the response body, libcurl still treats it as a
timeout condition and reports a message like:
"Operation timed out after 3000 milliseconds with 876 out of 876
bytes received"
It should only a timeout if the timer lapsed and we DIDN'T
receive the end of the response body yet.
Christopher Conroy fixed a problem with RTSP and GET_PARAMETER
reported to us by Massimo Callegari. There's a new test case 572
that verifies this now.
Kenny To filed the bug report #2963679 with patch to fix a
problem he experienced with doing multi interface HTTP POST over
a proxy using PROXYTUNNEL. He found a case where it would connect
fine but bits.tcpconnect was not set correct so libcurl didn't
work properly.
(http://curl.haxx.se/bug/view.cgi?id=2963679)
Akos Pasztory filed debian bug report #572276http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=572276
mentioning a problem with a resource that returns chunked-encoded
_and_ with a Content-Length and libcurl failed to properly ignore
the latter information.
Hauke Duden provided an example program that made the multi
interface crash. His example simply used the multi interface and
did first one FTP transfer and after completion it used a second
easy handle and did another FTP transfer on the same FTP server.
This triggered a bug in the "delayed easy handle kill" system
that curl uses: when an FTP connection is left alive it must keep
an easy handle around internally - only for the purpose of having
an easy handle when it later disconnects it. The code assumed
that when the easy handle was removed and an internal reference
was made, that version could be killed later on when a new easy
handle came using the same connection. This was wrong as Hauke's
example showed that the removed handle wasn't killed for real
until later. This caused a double close attempt => segfault.
The problem mentioned on Dec 10 2009
(http://curl.haxx.se/bug/view.cgi?id=2905220) was only partially fixed.
Partially because an easy handle can be associated with many connections in
the cache (e.g. if there is a redirect during the lifetime of the easy
handle). The previous patch only cleaned up the first one. The new fix now
removes the easy handle from all connections, not just the first one.
ran into some issues with the GSSAPI tests in configure.ac. The tests first
try to determine the include dirs and libs and set CPPFLAGS and LIBS
accordingly. It then checks for the headers and finally sets LIBS a second
time, causing the libs to be included twice. The first setting of LIBS seems
redundant and should be left out, since the first part is otherwise just
about finding headers.
My second issue is that 'krb5-config --libs gssapi' on Darwin is less than
useless and returns junk that, while it happens to work with gcc, causes
clang to choke. For example, --libs returns $CFLAGS along with the libs,
which is really retarded. Simply setting 'LIBS="$LIBS -lgssapi_krb5
-lresolv"' on Darwin is sufficient.
makes sure that when using sub-second timeouts, there's no final bad 1000ms
wait. Previously, a sub-second timeout would often make the elapsed time end
up the time rounded up to the nearest second (e.g. 1s for 200ms timeout)
the global timeout if set. Also, as was reported in the bug report #2956437
by Ryan Chan, the time stamp to use as basis for the per command timeout was
not set properly in the DONE phase for FTP (and not for SMTP) so I fixed
that just now. This was a regression compared to 7.19.7 due to the
conversion of FTP code over to the generic pingpong concepts.
http://curl.haxx.se/bug/view.cgi?id=2956437
(http://curl.haxx.se/bug/view.cgi?id=2958074) that curl on Windows with
option --trace-time did not use local time when timestamping trace lines.
This could also happen on other systems depending on time souurce.
properly in angle brackets. Recipients provided with CURLOPT_MAIL_RCPT now
get angle bracket wrapping automatically by libcurl unless the recipient
starts with an angle bracket as then the app is assumed to deal with that
properly on its own.
full DATA has been sent, and I modified the test SMTP server to also send
that response. As usual, the DONE operation that is made after a completed
transfer is still not doable in a non-blocking way so this waiting for 250
is unfortunately made blockingly.
in the same RCPT TO line, when they should be sent in separate single
commands. I updated test case 802 to verify this.
- I also fixed a bad use of my_setopt_str() of CURLOPT_MAIL_RCPT in the curl
tool which made it try to output it as string for the --libcurl feature
which could lead to crashes.
to automatically uncompress it with the CURLOPT_ENCODING option, libcurl
could wrongly provide the callback with more data than what the maximum
documented amount. An application could thus get tricked into badness if the
maximum limit was trusted to be enforced by libcurl itself (as it is
documented).
This is further detailed and explained in the libcurl security advisory
20100209 at
http://curl.haxx.se/docs/adv_20100209.html
simply check for CURLM_CALL_MULTI_PERFORM internally. This has the added
benefit that this goes in line with my long-term wishes to get rid of the
CURLM_CALL_MULTI_PERFORM all together from the public API.
HTTP Cookie: header _needs_ to be sorted on the path length in the cases
where two cookies using the same name are set more than once using
(overlapping) paths. Realizing this, identically named cookies must be
sorted correctly. But detecting only identically named cookies and take care
of them individually is harder than just to blindly and unconditionally sort
all cookies based on their path lengths. All major browsers also already do
this, so this makes our behavior one step closer to them in the cookie area.
Test case 8 was the only one that broke due to this change and I updated it
accordingly.
again when downloading files over FTP using ASCII and it turns out that the
final size of the file is not the same as the initial size the server
reported. This is very common since servers don't take the newline
conversions into account.
transfers: curl_multi_fdset() would return -1 and not set and file
descriptors several times during a transfer of a single file. It turned out
to be due to two different flaws now fixed. Gil's excellent recipe helped me
nail this.
ossl_connect_step3() increments an SSL session handle reference counter on
each call. When sessions are re-used this reference counter may be
incremented many times, but it will be decremented only once when done (by
Curl_ossl_session_free()); and the internal OpenSSL data will not be freed
if this reference count remains positive. When a session is re-used the
reference counter should be corrected by explicitly calling
SSL_SESSION_free() after each consecutive SSL_get1_session() to avoid
introducing a memory leak.
(http://curl.haxx.se/bug/view.cgi?id=2926284)
versions --ftp-ssl and --ftp-ssl-reqd as these options are now used to
control SSL/TLS for IMAP, POP3 and SMTP as well in addition to FTP. The old
option names are still working but the new ones are the prefered ones
(listed and documented).
command is a special "hack" used by the drftpd server, but even though it is
a custom extension I've deemed it fine to add to libcurl since this server
seems to survive and people keep using it and want libcurl to support
it. The new libcurl option is named CURLOPT_FTP_USE_PRET, and it is also
usable from the curl tool with --ftp-pret. Using this option on a server
that doesn't support this command will make libcurl fail.
detects and uses proxies based on the environment variables. If the proxy
was given as an explicit option it worked, but due to the setup order
mistake proxies would not be used fine for a few protocols when picked up
from '[protocol]_proxy'. Obviously this broke after 7.19.4. I now also added
test case 1106 that verifies this functionality.
(http://curl.haxx.se/bug/view.cgi?id=2913886)
on FTP errors in the transient 5xx range. Transient FTP errors are in the
4xx range. The code itself only tried on 5xx errors that occured _at login_.
Now the retry code retries on all FTP transfer failures that ended with a
4xx response.
(http://curl.haxx.se/bug/view.cgi?id=2911279)
accessing alredy freed memory and thus crash when using HTTPS (with
OpenSSL), multi interface and the CURLOPT_DEBUGFUNCTION and a certain order
of cleaning things up. I fixed it.
(http://curl.haxx.se/bug/view.cgi?id=2891591)
curl_easy_setopt with CURLOPT_HTTPHEADER, the library should set
data->state.expect100header accordingly - the current code (in 7.19.7 at
least) doesn't handle this properly. Martin Storsjo provided the fix!
rework patch that now integrates TFTP properly into libcurl so that it can
be used non-blocking with the multi interface and more. BLKSIZE also works.
The --tftp-blksize option was added to allow setting the TFTP BLKSIZE from
the command line.
though it failed to write a very small download to disk (done in a single
fwrite call). It turned out to be because fwrite() returned success, but
there was insufficient error-checking for the fclose() call which tricked
curl to believe things were fine.
CURLOPT_HTTPPROXYTUNNEL enabled over a proxy, a subsequent request using the
same proxy with the tunnel option disabled would still wrongly re-use that
previous connection and the outcome would only be badness.
end up with entries that wouldn't time-out:
1. Set up a first web server that redirects (307) to a http://server:port
that's down
2. Have curl connect to the first web server using curl multi
After the curl_easy_cleanup call, there will be curl dns entries hanging
around with in_use != 0.
(http://curl.haxx.se/bug/view.cgi?id=2891591)
its pkg-config file. So -Wl stuff ended up in the .pc file, which is really
bad, and breaks if there are multiple -Wl in our LDFLAGS (which are in
PTXdist). bug #2893592 (http://curl.haxx.se/bug/view.cgi?id=2893592)
--with-nss is set but not "yes".
I think we can still improve that to check for pkg-config in that path etc,
but at least this patch brings back the same functionality we had before.
the client certificate. It also disable the key name test as some engines
can select a private key/cert automatically (When there is only one key
and/or certificate on the hardware device used by the engine)
(http://curl.haxx.se/bug/view.cgi?id=2891595) which identified how an entry
in the DNS cache would linger too long if the request that added it was in
use that long. He also provided the patch that now makes libcurl capable of
still doing a request while the DNS hash entry may get timed out.
used during the FTP connection phase (after the actual TCP connect), while
it of course should be. I also made the speed check get called correctly so
that really slow servers will trigger that properly too.
wrong percentage for small files, most notable for <1000 bytes and could
easily end up showing more than 100% at the end. It also didn't show any
percentage, transfer size or estimated transfer times when transferring
less than 100 bytes.
auth is used, as it caused a crash. I failed to repeat the issue, but still
made a change that now forces the TCP connection used for a freed SCP
session to get closed and not be re-used.
POST using a read callback, with Digest authentication and
"Transfer-Encoding: chunked" enforced. I would then cause the first request
to be wrongly sent and then basically hang until the server closed the
connection. I fixed the problem and added test case 565 to verify it.
unparsable expiry dates and then treat them as session cookies - previously
libcurl would reject cookies with a date format it couldn't parse. Research
shows that the major browser treat such cookies as session cookies. I
modified test 8 and 31 to verify this.
by user 'koresh' introduced the --crlfile option to curl, which makes curl
tell libcurl about a file with CRL (certificate revocation list) data to
read.
(http://curl.haxx.se/bug/view.cgi?id=2873666) which identified a problem which
made libcurl loop infinitely when given incorrect credentials when using HTTP
GSS negotiate authentication.
(http://curl.haxx.se/bug/view.cgi?id=2870221) that libcurl returned an
incorrect return code from the internal trynextip() function which caused
him grief. This is a regression that was introduced in 7.19.1 and I find it
strange it hasn't hit us harder, but I won't persue into figuring out
exactly why.
SO_SNDBUF to CURL_WRITE_SIZE even if the SO_SNDBUF starts out larger. The
patch doesn't do a setsockopt if SO_SNDBUF is already greater than
CURL_WRITE_SIZE. This should help folks who have set up their computer with
large send buffers.
the define CURL_MAX_HTTP_HEADER which is even exposed in the public header
file to allow for users to fairly easy rebuild libcurl with a modified
limit. The rationale for a fixed limit is that libcurl is realloc()ing a
buffer to be able to put a full header into it, so that it can call the
header callback with the entire header, but that also risk getting it into
trouble if a server by mistake or willingly sends a header that is more or
less without an end. The limit is set to 100K.
saving received cookies with no given path, if the path in the request had a
query part. That is means a question mark (?) and characters on the right
side of that. I wrote test case 1105 and fixed this problem.
(http://curl.haxx.se/bug/view.cgi?id=2861587) identifying that libcurl used
the OpenSSL function X509_load_crl_file() wrongly and failed if it would
load a CRL file with more than one certificate within. This is now fixed.
powered libcurl in 7.19.6. If there was a X509v3 Subject Alternative Name
field in the certficate it had to match and so even if non-DNS and non-IP
entry was present it caused the verification to fail.
start second "Thu Jan 1 00:00:00 GMT 1970" as the date parser then returns 0
which internally then is treated as a session cookie. That particular date
is now made to get the value of 1.
libcurl to resolve 'localhost' whatever name you use in the URL *if* you set
the --interface option to (exactly) "LocalHost". This will enable us to
write tests for custom hosts names but still use a local host server.
when cross-compiling. The key to success is then you properly setup
PKG_CONFIG_PATH before invoking configure.
I also improved how NSS is detected by trying nss-config if pkg-config isn't
present, and as a last resort just use the lib name and force the user to
setup the LIBS/LDFLAGS/CFLAGS etc properly. The previous last resort would
add a range of various libs that would almost never be quite correct.
QUOTE commands and the request used the same path as the connection had
already changed to, it would decide that no commands would be necessary for
the "DO" action and that was not handled properly but libcurl would instead
hang.
read stdin in a non-blocking fashion. This also brings back -T- (minus) to
the previous blocking behavior since it could break stuff for people at
times.
strdup() that could lead to segfault if it returned NULL. I extended his
suggest patch to now have Curl_retry_request() return a regular return code
and better check that.
Fix SIGSEGV on free'd easy_conn when pipe unexpectedly breaks
Fix data corruption issue with re-connected transfers
Fix use after free if we're completed but easy_conn not NULL
sending of the TSIZE option. I don't like fixing bugs just hours before
a release, but since it was broken and the patch fixes this for him I decided
to get it in anyway.
each test, so that the test suite can now be used to actually test the
verification of cert names etc. This made an error show up in the OpenSSL-
specific code where it would attempt to match the CN field even if a
subjectAltName exists that doesn't match. This is now fixed and verified
in test 311.
should introduce an option to disable SNI, but as we're in feature freeze
now I've addressed the obvious bug here (pointed out by Peter Sylvester): we
shouldn't try to enable SNI when SSLv2 or SSLv3 is explicitly selected.
Code for OpenSSL and GnuTLS was fixed. NSS doesn't seem to have a particular
option for SNI, or are we simply not using it?
(http://curl.haxx.se/bug/view.cgi?id=2829955) mentioning the recent SSL cert
verification flaw found and exploited by Moxie Marlinspike. The presentation
he did at Black Hat is available here:
https://www.blackhat.com/html/bh-usa-09/bh-usa-09-archives.html#Marlinspike
Apparently at least one CA allowed a subjectAltName or CN that contain a
zero byte, and thus clients that assumed they would never have zero bytes
were exploited to OK a certificate that didn't actually match the site. Like
if the name in the cert was "example.com\0theatualsite.com", libcurl would
happily verify that cert for example.com.
libcurl now better use the length of the extracted name, not assuming it is
zero terminated.
only in some OpenSSL installs - like on Windows) isn't thread-safe and we
agreed that moving it to the global_init() function is a decent way to deal
with this situation.
CURLOPT_PREQUOTE) now accept a preceeding asterisk before the command to
send when using FTP, as a sign that libcurl shall simply ignore the response
from the server instead of treating it as an error. Not treating a 400+ FTP
response code as an error means that failed commands will not abort the
chain of commands, nor will they cause the connection to get disconnected.
out that OpenSSL-powered libcurl didn't support the SHA-2 digest algorithm,
and provided the solution too: to use OpenSSL_add_all_algorithms() instead
of the older SSLeay_* alternative. OpenSSL_add_all_algorithms was added in
OpenSSL 0.9.5
(http://curl.haxx.se/bug/view.cgi?id=2813123) and an a patch that fixes the
problem:
Url A is accessed using auth. Url A redirects to Url B (on a different
server0. Url B reuses a persistent connection. Url B has auth, even though
it's on a different server.
Note: if Url B does not reuse a persistent connection, auth is not sent.
This allows curl(1) to be used as a client-side tunnel for arbitrary stream
protocols by abusing chunked transfer encoding in both the HTTP request and
HTTP response. This requires server support for sending a response while a
request is still being read, of course.
If attempting to read from stdin returns EAGAIN, then we pause our sender.
This leaves curl to attempt to read from the socket while reading from stdin
(and thus sending) is paused.
to detect gnutls build options with pkg-config only and not libgnutls-config
anymore since GnuTLS has stopped distributing that tool. If an explicit path
is given to configure, we will instead guess on how to link and use that
lib. I did not use the patch from the bug report.
is almost always a VERY BAD IDEA. Yet there are still apps out there doing
this, and now recently it triggered a bug/side-effect in libcurl as when
libcurl sends a POST or PUT with NTLM, it sends an empty post first when it
knows it will just get a 401/407 back. If the app then replaced the
Content-Length header, it caused the server to wait for input that libcurl
wouldn't send. Aaron Oneal reported this problem in bug report #2799008http://curl.haxx.se/bug/view.cgi?id=2799008) and helped us verify the fix.
out that the cookie parser would leak memory when it parses cookies that are
received with domain, path etc set multiple times in the same header. While
such a cookie is questionable, they occur in the wild and libcurl no longer
leaks memory for them. I added such a header to test case 8.
of streams that had some parts (legitimately) missing. We now provide and use
a proper cleanup function for the content encoding submodule.
http://curl.haxx.se/mail/lib-2009-05/0092.html
as reported by Ebenezer Ikonne (on curl-users) and Laurent Rabret (on
curl-library). The transfer was mistakenly marked to get more data to send
but since it didn't actually have that, it just hung there...
(http://curl.haxx.se/bug/view.cgi?id=2784055) identifying a problem to
connect to SOCKS proxies when using the multi interface. It turned out to
almost not work at all previously. We need to wait for the TCP connect to
be properly verified before doing the SOCKS magic.
There's still a flaw in the FTP code for this.
(http://curl.haxx.se/bug/view.cgi?id=2786255) with a patch, identifying how
libcurl did not deal with SSL session ids properly if the server rejected a
re-use of one. Starting now, it will forget the rejected one and remember
the new. This change was for OpenSSL only, it is likely that other SSL lib
code needs similar fixes.
I've now made TFTP "connections" not being kept for re-use within libcurl.
TFTP is UDP-based so the benefit was really low (if even existing) to begin
with so instead of tracking down to fix this problem we instead removed the
re-use. I also enabled test case 1099 that I wrote a few days ago to verify
that this change fixes the reported problem.
Chen pointed out how curl couldn't upload with resume when reading from a
pipe.
This ended up with the introduction of a new return code for the
CURLOPT_SEEKFUNCTION callback that basically says that the seek failed but
that libcurl may try to resolve the situation anyway. In our case this means
libcurl will attempt to instead read that much data from the stream instead
of seeking and that way curl can now upload with resume when data is read
from a stream!
how it occurs (http://curl.haxx.se/mail/lib-2009-04/0289.html). The
conclusion was that if an error is detected and Curl_done() is called for
the connection, ftp_done() could at times return another error code that
then would take precedence and that new code confused existing logic that
works for the first error code (CURLE_SEND_ERROR) only.
OBJECTPOINT options. Now we've introduced a new function - my_setopt_str -
within the app for setting plain string options to avoid the risk of this
mistake happening.
Storsjo pointed out how setting CURLOPT_NOBODY to 0 could be downright
confusing as it set the method to either GET or HEAD. The example he showed
looked like:
curl_easy_setopt(curl, CURLOPT_PUT, 1);
curl_easy_setopt(curl, CURLOPT_NOBODY, 0);
The new way doesn't alter the method until the request is about to start. If
CURLOPT_NOBODY is then 1 the HTTP request will be HEAD. If CURLOPT_NOBODY is
0 and the request happens to have been set to HEAD, it will then instead be
set to GET. I believe this will be less surprising to users, and hopefully
not hit any existing users badly.
out to be leaking cacerts. Kamil Dudka helped me complete the fix. The issue
is found in Redhat's bug tracker:
https://bugzilla.redhat.com/show_bug.cgi?id=453612
There are still memory leaks present, but they seem to have other reasons.
non-configured libcurl. In this case curl_off_t data type was gated
to the off_t data type which depends on the _FILE_OFFSET_BITS. This
configuration is exactly the unwanted configuration for our curl_off_t
data type which must not depend on such setting. This breaks ABI for
libcurl libraries built with Sun compilers which were built without
having run the configure script with _FILE_OFFSET_BITS different than
64 and using the ILP32 data model.
curl_easy_duphandle did not necessarily duplicate the CURLOPT_COOKIEFILE
option. It only enabled the cookie engine in the destination handle if
data->cookies is not NULL (where data is the source handle). In case of a
newly initialized handle which just had the cookie support enabled by a
curl_easy_setopt(handle, CURL_COOKIEFILE, "")-call, handle->cookies was
still NULL because the setopt-call only appends the value to
data->change.cookielist, hence duplicating this handle would not have the
cookie engine switched on.
We also concluded that the slist-functionality would be suitable for being
put in its own module rather than simply hanging out in lib/sendf.c so I
created lib/slist.[ch] for them.
scripts to make it detect a bad checkout earlier. People with older
checkouts who don't do cvs update with the -d option won't get the new dirs
and then will get funny outputs that can be a bit hard to understand and
fix.
in the gnutls code where we were checking for negative values for errors,
when the man pages state that GNUTLS_E_SUCCESS is returned on success and
other values indicate error conditions.
curl didn't use sprintf() in a way that is documented to work in POSIX but
since we use our own printf() code (from libcurl) that shouldn't be a
problem. Nonetheless I modified the code to not rely on such particular
features and to not cause further raised eyebrowse with no good reason.
(http://curl.haxx.se/docs/adv_20090303.html also known as CVE-2009-0037) in
which previous libcurl versions (by design) can be tricked to access an
arbitrary local/different file instead of a remote one when
CURLOPT_FOLLOWLOCATION is enabled. This flaw is now fixed in this release
together this the addition of two new setopt options for controlling this
new behavior:
o CURLOPT_REDIR_PROTOCOLS controls what protocols libcurl is allowed to
follow to when CURLOPT_FOLLOWLOCATION is enabled. By default, this option
excludes the FILE and SCP protocols and thus you nee to explicitly allow
them in your app if you really want that behavior.
o CURLOPT_PROTOCOLS controls what protocol(s) libcurl is allowed to fetch
using the primary URL option. This is useful if you want to allow a user or
other outsiders control what URL to pass to libcurl and yet not allow all
protocols libcurl may have been built to support.
curl_global_init() function to properly maintain the performing functions
thread-safe. We've previously (28 April 2007) moved the init to a later time
just to avoid it to fail very early when libgcrypt dislikes the situation,
but that move was bad and the fix should rather be in libgcrypt or
elsewhere.
CURLINFO_CONTENT_LENGTH_DOWNLOAD and CURLINFO_CONTENT_LENGTH_UPLOAD return
-1 if the sizes aren't know. Previously these returned 0, make it impossible
to detect the difference between actually zero and unknown.
FTP with the multi interface: when a transfer fails, like when aborted by a
write callback, the control connection was wrongly closed and thus not
re-used properly.
This change is also an attempt to cleanup the code somewhat in this area, as
now the FTP code attempts to keep (better) track on pending responses
necessary to get read in ftp_done().
libcurl did a superfluous 1000ms wait when doing SFTP downloads!
We read data with libssh2 while doing the "DO" operation for SFTP and then
when we were about to start getting data for the actual file part, the
"TRANSFER" part, we waited for socket action (in 1000ms) before doing a
libssh2-read. But in this case libssh2 had already read and buffered the
data so we ended up always just waiting 1000ms before we get working on the
data!
plain FTP connections, and it will then allow MKD to fail once and retry the
CWD afterwards. This is especially useful if you're doing many simultanoes
connections against the same server and they all have this option enabled,
as then CWD may first fail but then another connection does MKD before this
connection and thus MKD fails but trying CWD works! The numbers can
(should?) now be set with the convenience enums now called
CURLFTP_CREATE_DIR and CURLFTP_CREATE_DIR_RETRY.
Tests has proven that if you're making an application that uploads a set of
files to an ftp server, you will get a noticable gain in speed if you're
using multiple connections and this option will be then be very useful.
the condition in the previous request was unmet. This is typically a time
condition set with CURLOPT_TIMECONDITION and was previously not possible to
reliably figure out. From bug report #2565128
(http://curl.haxx.se/bug/view.cgi?id=2565128)
interface and setting CURLMOPT_MAXCONNECTS to something less than the number
of handles you add to the multi handle. All the connections that didn't fit
in the cache would not be properly disconnected nor freed!
version 1.1 instead of 1.0 like before. This change also introduces the new
proxy type for libcurl called 'CURLPROXY_HTTP_1_0' that then allows apps to
switch (back) to CONNECT 1.0 requests. The curl tool also got a --proxy1.0
option that works exactly like --proxy but sets CURLPROXY_HTTP_1_0.
I updated all test cases cases that use CONNECT and I tried to do some using
--proxy1.0 and some updated to do CONNECT 1.1 to get both versions run.
enabled, we can now take advantage of its brand new AF_UNSPEC support in
ares_gethostbyname(). This makes test case 241 finally run fine for me wtih
this setup since it now parses the "::1 ip6-localhost" line fine in my
/etc/hosts file!
(http://curl.haxx.se/bug/view.cgi?id=2550061) mentioning that I failed to
properly make sure that the VC9 makefiles got included in the latest
release. I've now fixed the release script and verified it so next release
will hopefully include them properly!
CURLOPT_SOCKS5_GSSAPI_SERVICE and CURLOPT_SOCKS5_GSSAPI_NEC to allow libcurl
to do GSS-style authentication with SOCKS5 proxies. The curl tool got the
options called --socks5-gssapi-service and --socks5-gssapi-nec to enable
these.
disable "rfc4507bis session ticket support". rfc4507bis was later turned
into the proper RFC5077 it seems: http://tools.ietf.org/html/rfc5077
The enabled extension concerns the session management. I wonder how often
libcurl stops a connection and then resumes a TLS session. also, sending the
session data is some overhead. .I suggest that you just use your proposed
patch (which explicitly disables TICKET).
If someone writes an application with libcurl and openssl who wants to
enable the feature, one can do this in the SSL callback.
Sharad Gupta brought this to my attention. Peter Sylvester helped me decide
on the proper action.
(http://curl.haxx.se/bug/view.cgi?id=2535504) pointing out that realms with
quoted quotation marks in HTTP Digest headers didn't work. I've now added
test case 1095 that verifies my fix.
They basically offer the same thing the NO_PROXY environment variable only
offered previously: list a set of host names that shall not use the proxy
even if one is specified.
clarity. This does fix one problem that causes ;type=i FTP URLs
to fail in the Turkish locale when CURLOPT_PROXY_TRANSFER_MODE is
used (test case 561)
Added tests 561 and 1092 through 1094 to test various combinations
of ;type= and ;mode= URLs that could potentially fail in the Turkish
locale.
by Daniel Black, I've now added magic to the configure script that makes it
use pkg-config to detect gnutls details as well if the existing method
(using libgnutls-config) fails. While doing this, I cleaned up and unified
the pkg-config usage when detecting openssl and nss as well.
When using the multi interface over HTTP and the server returns a Location
header, the running easy handle will get stuck in the CURLM_STATE_PERFORM
state, leaving the external event loop stuck waiting for data from the
ingoing socket (when using the curl_multi_socket_action stuff). While this
bug was pretty hard to find, it seems to require only a one-line fix. The
break statement on line 1374 in multi.c caused the function to skip the call
to multistate().
How to reproduce this bug? Well, that's another question. evhiperfifo.c in
the examples directory chokes on this bug only _sometimes_, probably
depending on how fast the URLs are added. One way of testing the bug out is
writing to hiper.fifo from more than one source at the same time.
curl_easy_reset() by creating Curl_init_userdefined(). This had the side effect
of fixing curl_easy_reset() so it now also resets CURLOPT_FTP_FILEMETHOD and
CURLOPT_SSL_SESSIONID_CACHE
I have to jump through a few hoops now with the NSS library initialization
since another part of an application may have already initialized NSS by the
time Curl gets invoked. This patch is more careful to only shutdown the NSS
library if Curl did the initialization.
It also adds in a bit of code to set the default ciphers if the app that
call NSS_Init* did not call NSS_SetDomesticPolicy() or set specific
ciphers. One might argue that this lets other application developers get
lazy and/or they aren't using the NSS API correctly, and you'd be right.
But still, this will avoid terribly difficult-to-trace crashes and is
generally helpful.
(http://curl.haxx.se/bug/view.cgi?id=2413067) that identified a problem that
would cause libcurl to mark a DNS cache entry "in use" eternally if the
subsequence TCP connect failed. It would thus never get pruned and refreshed
as it should've been.
pipelining, as libcurl could then easily get confused and A) work on the
handle that was not "first in queue" on a pipeline, or even B) tell the app
to REMOVE a socket while it was in use by a second handle in a pipeline. Both
errors caused hanging or stalling applications.
was actually ready to get done, as the internal time resolution is higher
than the returned millisecond timer. Therefore it could cause applications
running on fast processors to do short bursts of busy-loops.
curl_multi_timeout() will now only return 0 if the timeout is actually
alreay triggered.
now has an improved ability to do right when the multi interface (both
"regular" and multi_socket) is used for SCP and SFTP transfers. This should
result in (much) less busy-loop situations and thus less CPU usage with no
speed loss.
operation didn't complete properly if the EAGAIN equivalent was returned but
libcurl would simply continue with a half-completed close operation
performed. This ruined persistent connection re-use and cause some
SSH-protocol errors in general. The correction is unfortunately adding a
blocking function - doing it entirely non-blocking should be considered for
a better fix.
duphandle+curl_mutli" (http://curl.haxx.se/bug/view.cgi?id=2416182) showed
that curl_easy_duphandle() wrongly also copied the pointer to the connection
cache, which was plain wrong and caused a segfault if the handle would be
used in a different multi handle than the handle it was duplicated from.
there are servers "out there" that relies on the client doing this broken
Digest authentication. Apache even comes with an option to work with such
broken clients.
The difference is only for URLs that contain a query-part (a '?'-letter and
text to the right of it).
libcurl now supports this quirk, and you enable it by setting the
CURLAUTH_DIGEST_IE bit in the bitmask you pass to the CURLOPT_HTTPAUTH or
CURLOPT_PROXYAUTH options. They are thus individually controlled to server
and proxy.
particular state for the control connection like it did before for implicit
FTPS (libcurl assumed such control connections to be encrypted while some
FTPS servers such as FileZilla assumes such connections to be clear
mode). Use the CURLOPT_USE_SSL option to set your desired level.
researching it, it turned out he got a 550 response back from a SIZE command
and then I fell over the text in RFC3659 that says:
The presence of the 550 error response to a SIZE command MUST NOT be taken
by the client as an indication that the file cannot be transferred in the
current MODE and TYPE.
In other words: the change I did on September 30th 2008 and that has been
included in the last two releases were a regression and a bad idea. We MUST
NOT take a 550 response from SIZE as a hint that the file doesn't exist.
(http://curl.haxx.se/bug/view.cgi?id=2221237) that identified an infinite
loop during GSS authentication given some specific conditions. With his
patience and great feedback I managed to narrow down the problem and
eventually fix it although I can't test any of this myself!
(http://curl.haxx.se/bug/view.cgi?id=2351645) that identified a problem with
the multi interface that occured if you removed an easy handle while in
progress and the handle was used in a HTTP pipeline.
function when built to support SCP and SFTP that helps the library to know
in which direction a particular libssh2 operation would return EAGAIN so
that libcurl knows what socket conditions to wait for before trying the
function call again. Previously (and still when using libssh2 0.18 or
earlier), libcurl will busy-loop in this situation when the easy interface
is used!
when uploading files to a single FTP server using multiple easy handle
handles with the multi interface. Occasionally a handle would stall in
mysterious ways.
The problem turned out to be a side-effect of the ConnectionExists()
function's eagerness to re-use a handle for HTTP pipelining so it would
select it even if already being in use, due to an inadequate check for its
chances of being used for pipelnining.
(http://curl.haxx.se/bug/view.cgi?id=2255627) which pointed out that a
program using libcurl's multi interface to download a HTTPS page with a
libcurl built powered by OpenSSL, would easily get silly and instead hand
over SSL details as data instead of the actual HTTP headers and body. This
happened because libcurl would consider the connection handshake done too
early. This problem was introduced at September 22nd 2008 with my fix of the
bug #2107377
The correct fix is now instead done within the GnuTLS-handling code, as both
the OpenSSL and the NSS code already deal with this situation in similar
fashion. I added test case 560 in an attempt to verify this fix, but
unfortunately it didn't trigger it even before this fix!
problem with MSVC 6 makefile that caused a build failure. It was noted that
the curl_addrinfo.obj reference was missing. I took the opportunity to sort
the list in which this was missing.
make CURLOPT_PROXYUSERPWD sort of deprecated. The primary motive for adding
these new options is that they have no problems with the colon separator
that the CURLOPT_PROXYUSERPWD option does.
(http://curl.haxx.se/bug/view.cgi?id=2154627) which pointed out that libcurl
uses strcasecmp() in multiple places where it causes failures when the
Turkish locale is used. This is because 'i' and 'I' isn't the same letter so
strcasecmp() on those letters are different in Turkish than in English (or
just about all other languages). I thus introduced a totally new internal
function in libcurl (called Curl_ascii_equal) for doing case insentive
comparisons for english-(ascii?) style strings that thus will make "file"
and "FILE" match even if the Turkish locale is selected.
systems supporting getifaddrs(). Also fixed a problem where an IPv6
address could be chosen instead of an IPv4 one for --interface when it
involved a name lookup.
fixed a CURLINFO_REDIRECT_URL memory leak and an additional wrong-doing:
Any subsequent transfer with a redirect leaks memory, eventually crashing
the process potentially.
Any subsequent transfer WITHOUT a redirect causes the most recent redirect
that DID occur on some previous transfer to still be reported.
eventually identified a flaw in how the multi_socket interface in some cases
missed to call the timeout callback when easy interfaces are removed and
added within the same millisecond.
curl_easy_setopt: CURLOPT_USERNAME and CURLOPT_PASSWORD that sort of
deprecates the good old CURLOPT_USERPWD since they allow applications to set
the user name and password independently and perhaps more importantly allow
both to contain colon(s) which CURLOPT_USERPWD doesn't fully support.
the app re-used the handle to do a connection to host B and then again
re-used the handle to host A, it would not update the info with host A's IP
address (due to the connection being re-used) but it would instead report
the info from host B.
gets a 550 response back for the cases where a download (or NOBODY) is
wanted. It still allows a 550 as response if the SIZE is used as part of an
upload process (like if resuming an upload is requested and the file isn't
there before the upload). I also modified the FTP test server and a few test
cases accordingly to match this modified behavior.
date parser function. This makes our function less dependent on system-
provided functions and instead we do all the magic ourselves. We also no
longer depend on the TZ environment variable.
Markus Moeller reported: http://curl.haxx.se/mail/archive-2008-09/0016.html
- recv() errors other than those equal to EAGAIN now cause proper
CURLE_RECV_ERROR to get returned. This made test case 160 fail so I've now
disabled it until we can figure out another way to exercise that logic.
proxy" (http://curl.haxx.se/bug/view.cgi?id=2107377) that showed how a multi
interface using program didn't work when built with GnuTLS and a CONNECT
request was done over a proxy (basically test 502 over a proxy to a HTTPS
site). It turned out the ssl connect function would get called twice which
caused the second call to fail.
sites in cases where the cookie clearly has a very old expiry date. The
condition was simply that libcurl's date parser would fail to convert the
date and it would then count as a (timed-based) match. Starting now, a
missed date due to an unsupported date format or date range will now cause
the cookie to not match.
CURLOPT_POST301 (but adds a define for backwards compatibility for you who
don't define CURL_NO_OLDIES). This option allows you to now also change the
libcurl behavior for a HTTP response 302 after a POST to not use GET in the
subsequent request (when CURLOPT_FOLLOWLOCATION is enabled). I edited the
patch somewhat before commit. The curl tool got a matching --post302
option. Test case 1076 was added to verify this.
enabling this feature with CURLOPT_CERTINFO for a request using SSL (HTTPS
or FTPS), libcurl will gather lots of server certificate info and that info
can then get extracted by a client after the request has completed with
curl_easy_getinfo()'s CURLINFO_CERTINFO option. Linus Nielsen Feltzing
helped me test and smoothen out this feature.
Unfortunately, this feature currently only works with libcurl built to use
OpenSSL.
This feature was sponsored by networking4all.com - thanks!
file for libcurl, and while doing that fix he unified with curl-config.in
how the supported protocols and features are extracted and used, so both those
tools should now always be synced.
"Connection: close" and actually close the connection after the
response-body, libcurl could still have outstanding data to send and it
would not properly notice this and stop sending. This caused weirdness and
sad faces. http://curl.haxx.se/bug/view.cgi?id=2080222
Note that there are still reasons to consider libcurl's behavior when
getting a >= 400 response code while sending data, as Craig Perras' note
"http upload: how to stop on error" specifies:
http://curl.haxx.se/mail/archive-2008-08/0138.html
an unlock in between) for a certain case and that in fact works when using
regular windows mutexes but not with pthreads'! Locks should of course not
get locked again so this is now fixed.
http://curl.haxx.se/mail/lib-2008-08/0422.html
which caused an error when the second header was dumped due to stdout
being closed. Added test case 1066 to verify. Also fixed a potential
problem where a closed file descriptor might be used for an upload
when more than one URL is given.
memory leak because it never called the OpenSSL function
CRYPTO_cleanup_all_ex_data() as it was supposed to. This was because of a
missing define in config-win32.h!
(http://curl.haxx.se/bug/view.cgi?id=2042430) with a patch. "NTLM Windows
SSPI code is not thread safe". This was due to libcurl using static
variables to tell wether to load the necessary SSPI DLL, but now the loading
has been moved to the more suitable curl_global_init() call.
(http://curl.haxx.se/bug/view.cgi?id=2042440) with a patch. He identified a
problem when using NTLM over a proxy but the end-point does Basic, and then
libcurl would do wrong when the host sent "Connection: close" as the proxy's
NTLM state was erroneously cleared.
connection with the multi interface even if a previous use of it caused a
CURLE_PEER_FAILED_VERIFICATION to get returned. I now make sure that failed
SSL connections properly close the connections.
proved how PUT and POST with a redirect could lead to a "hang" due to the
data stream not being rewound properly when it had to in order to get sent
properly (again) to the subsequent URL. This is now fixed and these test
cases are no longer disabled.
with -C - sent garbage in the Content-Range: header. I fixed this problem by
making sure libcurl always sets the size of the _entire_ upload if an app
attemps to do resumed uploads since libcurl simply cannot know the size of
what is currently at the server end. Test 1041 is no longer disabled.
when we have been doing this since revision 1.47 of configure.ac 4 years and
5 months ago when cross-compiling a Windows target. We actually don't use any
function from the Windows GDI (Graphics Device Interface) related with drawing
or graphics-related operations.
incorrectly--the host name is treated as part of the user name and the
port number becomes the password. This can be observed in test 279
(was KNOWN_ISSUE #54).
parser to allow numerical IPv6-addresses to be specified with the scope
given, as per RFC4007 - with a percent letter that itself needs to be URL
escaped. For example, for an address of fe80::1234%1 the HTTP URL is:
"http://[fe80::1234%251]/"
true bug in libcurl built with OpenSSL. It made curl_easy_getinfo() more or
less always return 0 for CURLINFO_SSL_VERIFYRESULT because the function that
would set it to something non-zero would return before the assign in almost
all error cases. The internal variable is now set to non-zero from the start
of the function only to get cleared later on if things work out fine.
overrun" (http://curl.haxx.se/bug/view.cgi?id=2026240) identifying two
problems, and providing the fix for them:
- CURL_READFUNC_PAUSE did in fact not pause the _sending_ of data that it is
designed for but paused _receiving_ of data!
- libcurl didn't internally set the read counter to zero when this return
code was detected, which would potentially lead to junk getting sent to
the server.
is set in fdset.events" (http://curl.haxx.se/bug/view.cgi?id=2015126) which
exactly pinpointed the problem only triggered on Windows Vista, provided
reference to docs and also a fix. There is much work behind Peter Lamberg's
excellent bug report. Thank You!
fix for it. It occured when you did a FTP transfer using
CURLFTPMETHOD_SINGLECWD and then did another one on the same easy handle but
switched to CURLFTPMETHOD_NOCWD. Due to the "dir depth" variable not being
cleared properly. Scott's test case is now known as test 539 and it
verifies the fix.
CURLINFO_APPCONNECT_TIME. This is set with the "application layer"
handshake/connection is completed (typically SSL, TLS or SSH). By using this
you can figure out the application layer's own connect time. You can extract
the time stamp using curl's -w option and the new variable named
'time_appconnect'. This feature was sponsored by Lenny Rachitsky at NeuStar.
some systems" (http://curl.haxx.se/bug/view.cgi?id=1999181). The problem was
that the configure script did not use the _POSIX_MONOTONIC_CLOCK feature test
macro when checking monotonic clock availability. This is now fixed and the
monotonic clock will not be used unless the feature test macro is defined
with a value greater than zero indicating always supported.
(http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=487567) pointing out that
libcurl used Content-Range: instead of Range when doing a range request with
--head (CURLOPT_NOBODY). This is now fixed and test case 1032 was added to
verify.
handshake with a SSLv2 server, and it turned out to be because it didn't
recognize the cipher named "rc4-md5". In our list that cipher was named
plainly "rc4". I've now added rc4-md5 to work as an alias as Phil reported
that it made things work for him again.
crashed libcurl. This is now addressed by making sure we use "plain send"
internally when doing the socks handshake instead of the Curl_write()
function which is designed to use the "target" protocol. That's then SCP or
SFTP in this case. I also took the opportunity and cleaned up some ssh-
related #ifdefs in the code for readability.
libcurl to not tell the app properly when a socket was closed (when the name
resolve done by c-ares is done) and then immediately re-created and put to
use again (for the actual connection). Since the closure will make the
"watch status" get lost in several event-based systems libcurl will need to
tell the app about this close/re-create case.
multi interface with pipelining enabled as it would wrongly check for,
detect and close "dead connections" even though that connection was already
in use!
All boolean options (such as -O, -I, -v etc), both short and long versions,
now always switch on/enable the option named. Using the same option multiple
times thus make no difference. To switch off one of those options, you need
to use the long version of the option and type --no-OPTION. Like to disable
verbose mode you use --no-verbose!
- Added --remote-name-all to curl, which if used changes the default for all
given URLs to be dealt with as if -O is used. So if you want to disable that
for a specific URL after --remote-name-all has been used, you muse use -o -
or --no-remote-name.
curl_easy_getinfo. It returns a pointer to a string with the most recently
used IP address. Modified test case 500 to also verify this feature. The
implementing of this feature was sponsored by Lenny Rachitsky at NeuStar.
the curl_multi_socket() API with HTTP pipelining enabled and could lead to
the pipeline basically stalling for a very long period of time until it took
off again.
provided excellent repeat recipes. I fixed the cases I managed to reproduce
but Jeff still got some (SCP) problems even after these fixes:
http://curl.haxx.se/mail/lib-2008-05/0342.html
how the HTTP redirect following code didn't properly follow to a new URL if
the new url was but a query string such as "Location: ?moo=foo". Test case
1031 was added to verify this fix.
interface problems:
o with pipelining disabled, the state should never be set to WAITDO but
rather go straight to DO
o we had multiple states for which the internal function returned no socket
at all to wait for, with the effect that libcurl calls the socket callback
(when curl_multi_socket() is used) with REMOVE prematurely (as it would be
added again within very shortly)
o when in DO and DOING states, the HTTP and HTTPS protocol handler functions
didn't return that the socket should be waited for writing, but instead it
was treated as if no socket was needing monitoring so again REMOVE was
called prematurely.
and receive data over a connection previously setup with curl_easy_perform()
and its CURLOPT_CONNECT_ONLY option. The sendrecv.c example was added to
show how they can be used.
when using CURL_AUTH_ANY" (http://curl.haxx.se/bug/view.cgi?id=1945240).
The problem was that when libcurl rewound a stream meant for upload when it
would prepare for a second request, it could accidentally continue the
sending of the rewound data on the first request instead of on the second.
Ben also provided test case 1030 that verifies this fix.
since libcurl used getprotobyname() and that isn't thread-safe. We now
switched to use IPPROTO_TCP unconditionally, but perhaps the proper fix is
to detect the thread-safe version of the function and use that.
http://curl.haxx.se/mail/lib-2008-05/0011.html
redirections and thus cannot use CURLOPT_FOLLOWLOCATION easily, we now
introduce the new CURLINFO_REDIRECT_URL option that lets applications
extract the URL libcurl would've redirected to if it had been told to. This
then enables the application to continue to that URL as it thinks is
suitable, without having to re-implement the magic of creating the new URL
from the Location: header etc. Test 1029 verifies it.
Define HAVE_GSSMIT if <gssapi/{gssapi.h,gssapi_generic.h,gssapi_krb5.h}> are
available, otherwise define HAVE_GSSHEIMDAL if <gssapi.h> is available.
Only define GSS_C_NT_HOSTBASED_SERVICE to gss_nt_service_name if
GSS_C_NT_HOSTBASED_SERVICE isn't declared by the gssapi headers. This should
avoid breakage in case we wrongly recognize Heimdal as MIT again.
GET simply because previously when you set CURLOPT_NOBODY to TRUE first and
then FALSE you'd end up in a broken state where a HTTP request would do a
HEAD by still act a lot like for a GET and hang waiting for the content etc.
application to provide data for a multipart with the read callback. Note
that the size needs to be provided with CURLFORM_CONTENTSLENGTH when the
stream option is used. This feature is verified by the new test case
554. This feature was sponsored by Xponaut.
support when curl didn't even have regular LDAP support. It looks like
this could happen when the --enable-ldaps configure switch is given but
configure couldn't find the LDAP headers or libraries.
default instead of a ca bundle. The configure script will also look for a
ca path if no ca bundle is found and no option given.
- Fixed detection of previously installed curl-ca-bundle.crt
CURLOPT_FTP_CREATE_MISSING_DIRS to create a directory, and then re-used the
handle and uploaded another file to another directory that needed to be
created, the second upload would fail. Another case of a state variable that
wasn't properly reset between requests.
- I rewrote the 100-continue code to use a single state variable instead of
the previous two ones. I think it made the logic somewhat clearer.
