There is no benefit to holding the data sharelock when freeing the
addrinfo in case it fails, so ensure releaseing it as soon as we can
rather than holding on to it. This also aligns the code with other
consumers of sharelocks.
Closes#3516
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
The http2 code for connection checking needs a transfer to use. Make
sure a working one is set before handler->connection_check() is called.
Reported-by: jnbr on github
Fixes#3541Closes#3547
urlapi: turn three local-only functions into statics
conncache: make conncache_find_first_connection static
multi: make detach_connnection static
connect: make getaddressinfo static
curl_ntlm_core: make hmac_md5 static
http2: make two functions static
http: make http_setup_conn static
connect: make tcpnodelay static
tests: make UNITTEST a thing to mark functions with, so they can be static for
normal builds and non-static for unit test builds
... and mark Curl_shuffle_addr accordingly.
url: make up_free static
setopt: make vsetopt static
curl_endian: make write32_le static
rtsp: make rtsp_connisdead static
warnless: remove unused functions
memdebug: remove one unused function, made another static
If the incoming len 5, but the buffer does not have a termination
after 5 bytes, the strtol() call may keep reading through the line
buffer until is exceeds its boundary. Fix by ensuring that we are
using a bounded read with a temporary buffer on the stack.
Bug: https://curl.haxx.se/docs/CVE-2019-3823.html
Reported-by: Brian Carpenter (Geeknik Labs)
CVE-2019-3823
Attempt to add support for Secure Channel binding when negotiate
authentication is used. The problem to solve is that by default IIS
accepts channel binding and curl doesn't utilise them. The result was a
401 response. Scope affects only the Schannel(winssl)-SSPI combination.
Fixes https://github.com/curl/curl/issues/3503
Closes https://github.com/curl/curl/pull/3509
Stick to "Schannel" everywhere. The configure option --with-winssl is
kept to allow existing builds to work but --with-schannel is added as an
alias.
Closes#3504
mbedTLS doesn't have a sigpipe management. If a write/read occurs when
the remote closes the socket, the signal is raised and kills the
application. Use the curl mecanisms fix this behavior.
Signed-off-by: Jeremie Rapin <j.rapin@overkiz.com>
Closes#3502
Compiling with msvc /analyze and a recent Windows SDK warns against
using GetTickCount (Suggests to use GetTickCount64 instead.)
Since GetTickCount is only being used when GetTickCount64 isn't
available, I am disabling that warning.
Fixes https://github.com/curl/curl/issues/3437
Closes https://github.com/curl/curl/pull/3440
CURLOPT_SSH_KNOWNHOSTS and CURLOPT_SSH_KEYFUNCTION are supported for
libssh as well. So accepting these options only when compiling with
libssh2 is wrong here.
Fixes#3493Closes#3494
By default, libssh creates a new socket, instead of using the socket
created by curl for SSH connections.
Pass the socket created by curl to libssh using ssh_options_set() with
SSH_OPTIONS_FD directly after ssh_new(). So libssh uses our socket
instead of creating a new one.
This approach is very similar to what is done in the libssh2 code, where
the socket created by curl is passed to libssh2 when
libssh2_session_startup() is called.
Fixes#3491Closes#3495
There is no real gain in performing memcmp() comparisons on single
characters, so change these to array subscript inspections which
saves a call and makes the code clearer.
Closes#3486
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Reviewed-by: Jay Satiro <raysatiro@yahoo.com>
Windows extended potection (aka ssl channel binding) is required
to login to ntlm IIS endpoint, otherwise the server returns 401
responses.
Fixes#3280Closes#3321
When a ssh session startup fails, it is useful to know why it has
failed. This commit changes the message from:
"Failure establishing ssh session"
to something like this, for example:
"Failure establishing ssh session: -5, Unable to exchange encryption keys"
Closes#3481
.... to not pass in a const in the second argument as that's not how it
is supposed to be used and might cause compiler warnings.
Reported-by: Pavel Pavlov
Fixes#3477Closes#3478
extract_if_dead() dead is called from two functions, and only one of
them should get conn->data updated and now neither call path clears it.
scan-build found a case where conn->data would be NULL dereferenced in
ConnectionExists() otherwise.
Closes#3473
Make sure that this function sets a proper "live" transfer for the
connection before calling the protocol-specific connection check
function, and then clear it again afterward as a non-used connection has
no current transfer.
Reported-by: Jeroen Ooms
Reviewed-by: Marcel Raad
Reviewed-by: Daniel Gustafsson
Fixes#3463Closes#3464
We use "conn" everywhere to be a pointer to the connection.
Introduces two functions that "attaches" and "detaches" the connection
to and from the transfer.
Going forward, we should favour using "data->conn" (since a transfer
always only has a single connection or none at all) to "conn->data"
(since a connection can have none, one or many transfers associated with
it and updating conn->data to be correct is error prone and a frequent
reason for internal issues).
Closes#3442
Fixes#3436Closes#3448
Problem 1
After LOTS of scratching my head, I eventually realized that even when doing
10 uploads in parallel, sometimes the socket callback to the application that
tells it what to wait for on the socket, looked like it would reflect the
status of just the single transfer that just changed state.
Digging into the code revealed that this was indeed the truth. When multiple
transfers are using the same connection, the application did not correctly get
the *combined* flags for all transfers which then could make it switch to READ
(only) when in fact most transfers wanted to get told when the socket was
WRITEABLE.
Problem 1b
A separate but related regression had also been introduced by me when I
cleared connection/transfer association better a while ago, as now the logic
couldn't find the connection and see if that was marked as used by more
transfers and then it would also prematurely remove the socket from the socket
hash table even in times other transfers were still using it!
Fix 1
Make sure that each socket stored in the socket hash has a "combined" action
field of what to ask the application to wait for, that is potentially the ORed
action of multiple parallel transfers. And remove that socket hash entry only
if there are no transfers left using it.
Problem 2
The socket hash entry stored an association to a single transfer using that
socket - and when curl_multi_socket_action() was called to tell libcurl about
activities on that specific socket only that transfer was "handled".
This was WRONG, as a single socket/connection can be used by numerous parallel
transfers and not necessarily a single one.
Fix 2
We now store a list of handles in the socket hashtable entry and when libcurl
is told there's traffic for a particular socket, it now iterates over all
known transfers using that single socket.
Added Curl_resolver_kill() for all three resolver modes, which only
blocks when necessary, along with test 1592 to confirm
curl_multi_remove_handle() doesn't block unless it must.
Closes#3428Fixes#3371
When building with Unicode on MSVC, the compiler warns about freeing a
pointer to const in Curl_unicodefree. Fix this by declaring it as
non-const and casting the argument to Curl_convert_UTF8_to_tchar to
non-const too, like we do in all other places.
Closes https://github.com/curl/curl/pull/3435
The previous fix for parsing IPv6 URLs with a zone index was a paddle
short for URLs without an explicit port. This patch fixes that case
and adds a unit test case.
This bug was highlighted by issue #3408, and while it's not the full
fix for the problem there it is an isolated bug that should be fixed
regardless.
Closes#3411
Reported-by: GitYuanQu on github
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
This adds support for wildcard hosts in CURLOPT_RESOLVE. These are
try-last so any non-wildcard entry is resolved first. If specified,
any host not matched by another CURLOPT_RESOLVE config will use this
as fallback.
Example send a.com to 10.0.0.1 and everything else to 10.0.0.2:
curl --resolve *:443:10.0.0.2 --resolve a.com:443:10.0.0.1 \
https://a.comhttps://b.com
This is probably quite similar to using:
--connect-to a.com:443:10.0.0.1:443 --connect-to :443:10.0.0.2:443
Closes#3406
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
- Use QueryPerformanceCounter on Windows Vista+
There is confusing info floating around that QueryPerformanceCounter
can leap etc, which might have been true long time ago, but no longer
the case nowadays (perhaps starting from WinXP?). Also, boost and
std::chrono::steady_clock use QueryPerformanceCounter in a similar way.
Prior to this change GetTickCount or GetTickCount64 was used, which has
lower resolution. That is still the case for <= XP.
Fixes https://github.com/curl/curl/issues/3309
Closes https://github.com/curl/curl/pull/3318
