Most headerfiles end with a /* <headerguard> */ comment, but it was
missing from some. The comment isn't the most important part of our
code documentation but consistency has an intrinsic value in itself.
This adds header guard comments to the files that were lacking it.
Closes#3158
Reviewed-by: Jay Satiro <raysatiro@yahoo.com>
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Curl_follow() no longer frees the string. Make sure it happens in the
caller function, like we normally handle allocations.
This bug was introduced with the use of the URL API internally, it has
never been in a release version
Reported-by: Dario Weißer
Closes#3149
For IP addresses in the subject alternative name field, the length
of the IP address (and hence the number of bytes to perform a
memcmp on) is incorrectly calculated to be zero. The code previously
subtracted q from name.end. where in a successful case q = name.end
and therefore addrlen equalled 0. The change modifies the code to
subtract name.beg from name.end to calculate the length correctly.
The issue only affects libcurl with GSKit SSL, not other SSL backends.
The issue is not a security issue as IP verification would always fail.
Fixes#3102Closes#3141
Classic MinGW has neither InitializeCriticalSectionEx nor
GetTickCount64, independent of the target Windows version.
Closes https://github.com/curl/curl/pull/3113
Now FILE transfers send headers to the header callback like HTTP and
other protocols. Also made curl_easy_getinfo(...CURLINFO_PROTOCOL...)
work for FILE in the callbacks.
Makes "curl -i file://.." and "curl -I file://.." work like before
again. Applied the bold header logic to them too.
Regression from c1c2762 (7.61.0)
Reported-by: Shaun Jackman
Fixes#3083Closes#3101
In case a very small buffer was passed to the version function, it could
result in the buffer not being NULL-terminated since strncpy() doesn't
guarantee a terminator on an overflowed buffer. Rather than adding code
to terminate (and handle zero-sized buffers), move to using snprintf()
instead like all the other vtls backends.
Closes#3105
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Reviewed-by: Viktor Szakats <commit@vszakats.net>
If a !checksrc! disable command specified to ignore zero errors, it was
still added to the ignore block even though nothing was ignored. While
there were no blocks ignored that shouldn't be ignored, the processing
ended with with a warning:
<filename>:<line>:<col>: warning: Unused ignore: LONGLINE (UNUSEDIGNORE)
/* !checksrc! disable LONGLINE 0 */
^
Fix by instead treating a zero ignore as a a badcommand and throw a
warning for that one.
Closes#3096
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Enable strict and warnings mode for checksrc to ensure we aren't missing
anything due to bugs in the checking code. This uncovered a few things
which are all fixed in this commit:
* several variables were used uninitialized
* several variables were not defined in the correct scope
* the whitelist filehandle was read even if the file didn't exist
* the enable_warn() call when a disable counter had expired was passing
incorrect variables, but since the checkwarn() call is unlikely to hit
(the counter is only decremented to zero on actual ignores) it didn't
manifest a problem.
Closes#3090
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Reviewed-by: Marcel Raad <Marcel.Raad@teamviewer.com>
The result of a memory allocation should always be checked, as we may
run under memory pressure where even a small allocation can fail. This
adds checking and error handling to a few cases where the allocation
wasn't checked for success. In the ftp case, the freeing of the path
variable is moved ahead of the allocation since there is little point
in keeping it around across the strdup, and the separation makes for
more readable code. In nwlib, the lock is aslo freed in the error path.
Also bumps the copyright years on affected files.
Closes#3084
Reviewed-by: Jay Satiro <raysatiro@yahoo.com>
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
... and libcurl doesn't support any single-letter URL schemes (if there
even exist any) so it should be fairly risk-free.
Reported-by: Marcel Raad
Fixes#3070Closes#3071
Use 'GNUInstallDirs' standard module to set destinations of installed
files.
Use uppercase "CURL" names instead of lowercase "curl" to match standard
'FindCURL.cmake' CMake module:
* https://cmake.org/cmake/help/latest/module/FindCURL.html
Meaning:
* Install 'CURLConfig.cmake' instead of 'curl-config.cmake'
* User should call 'find_package(CURL)' instead of 'find_package(curl)'
Use 'configure_package_config_file' function to generate
'CURLConfig.cmake' file. This will make 'curl-config.cmake.in' template
file smaller and handle components better. E.g. current configuration
report no error if user specified unknown components (note: new
configuration expects no components, report error if user will try to
specify any).
Closes https://github.com/curl/curl/pull/2849
This fixes potential out-of-buffer access on "file:./" URL
$ valgrind curl "file:./"
==24516== Memcheck, a memory error detector
==24516== Copyright (C) 2002-2015, and GNU GPL'd, by Julian Seward et al.
==24516== Using Valgrind-3.11.0 and LibVEX; rerun with -h for copyright info
==24516== Command: /home/even/install-curl-git/bin/curl file:./
==24516==
==24516== Conditional jump or move depends on uninitialised value(s)
==24516== at 0x4C31F9C: strcmp (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==24516== by 0x4EBB315: seturl (urlapi.c:801)
==24516== by 0x4EBB568: parseurl (urlapi.c:861)
==24516== by 0x4EBC509: curl_url_set (urlapi.c:1199)
==24516== by 0x4E644C6: parseurlandfillconn (url.c:2044)
==24516== by 0x4E67AEF: create_conn (url.c:3613)
==24516== by 0x4E68A4F: Curl_connect (url.c:4119)
==24516== by 0x4E7F0A4: multi_runsingle (multi.c:1440)
==24516== by 0x4E808E5: curl_multi_perform (multi.c:2173)
==24516== by 0x4E7558C: easy_transfer (easy.c:686)
==24516== by 0x4E75801: easy_perform (easy.c:779)
==24516== by 0x4E75868: curl_easy_perform (easy.c:798)
Was originally spotted by
https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=10637
Credit to OSS-Fuzz
Closes#3039
- replace tabs with spaces where possible
- remove line ending spaces
- remove double/triple newlines at EOF
- fix a non-UTF-8 character
- cleanup a few indentations/line continuations
in manual examples
Closes https://github.com/curl/curl/pull/3037
- Treat CURL_SSLVERSION_MAX_NONE the same as
CURL_SSLVERSION_MAX_DEFAULT. Prior to this change NONE would mean use
the minimum version also as the maximum.
This is a follow-up to 6015cef which changed the behavior of setting
the SSL version so that the requested version would only be the minimum
and not the maximum. It appears it was (mostly) implemented in OpenSSL
but not other backends. In other words CURL_SSLVERSION_TLSv1_0 used to
mean use just TLS v1.0 and now it means use TLS v1.0 *or later*.
- Fix CURL_SSLVERSION_MAX_DEFAULT for OpenSSL.
Prior to this change CURL_SSLVERSION_MAX_DEFAULT with OpenSSL was
erroneously treated as always TLS 1.3, and would cause an error if
OpenSSL was built without TLS 1.3 support.
Co-authored-by: Daniel Gustafsson
Fixes https://github.com/curl/curl/issues/2969
Closes https://github.com/curl/curl/pull/3012
In order for this API to fully work for libcurl itself, it now offers a
CURLU_GUESS_SCHEME flag that makes it "guess" scheme based on the host
name prefix just like libcurl always did. If there's no known prefix, it
will guess "http://".
Separately, it relaxes the check of the host name so that IDN host names
can be passed in as well.
Both these changes are necessary for libcurl itself to use this API.
Assisted-by: Daniel Gustafsson
Closes#3018
In the CURLUPART_URL case, there is no codepath which invokes url
decoding so remove the assignment of the urldecode variable. This
fixes the deadstore bug-report from clang static analysis.
Closes#3015
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
The reallocation was using the input pointer for the return value, which
leads to a memory leak on reallication failure. Fix by instead use the
safe internal API call Curl_saferealloc().
Closes#3005
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Reviewed-by: Nick Zitzmann <nickzman@gmail.com>
ftp_send_command() was using vsnprintf() without including the libcurl
*rintf() replacement header. Fix by including curl_printf.h and also
add curl_memory.h while at it since memdebug.h depends on it.
Closes#2999
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
The failf() macro is the name used for invoking Curl_failf(). While
there isn't a way to turn off failf like there is for infof, but it's
still a good idea to use the macro.
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Strings broken on multiple rows in the .c file need to have appropriate
whitespace padding on either side of the concatenation point to render
a correct amalgamated string. Fix by adding a space at the occurrences
found.
Closes#2986
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Commit 8238ba9c5f inadvertently removed
the actual command to be sent from the send buffer in a refactoring.
Add back copying the command into the buffer. Also add more guards
against malformed input while at it.
Closes#2985
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
When erroring out on a request being too large, the existing buffer was
leaked. Fix by explicitly freeing on the way out.
Closes#2966
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
- Use memcpy instead of strncpy to copy a string without termination,
since gcc8 warns about using strncpy to copy as many bytes from a
string as its length.
Suggested-by: Viktor Szakats
Closes https://github.com/curl/curl/issues/2980
Rather than jumping backwards to where failure cleanup happens
to be performed, move the failure case to end of the function
where it is expected per existing coding convention.
Closes#2965
If the formatting fails, we error out on a fatal error and
clean up on the way out. The array was however freed within
the wrong scope and was thus never freed in case the cookies
were written to a file instead of STDOUT.
Closes#2957
Add functionality so that protocols can do custom keepalive on their
connections, when an external API function is called.
Add docs for the new options in 7.62.0
Closes#1641
Sometimes it may be considered a security risk to load an external
OpenSSL configuration automatically inside curl_global_init(). The
configuration option --disable-ssl-auto-load-config disables this
automatism. The Windows build scripts winbuild/Makefile.vs provide a
corresponding option ENABLE_SSL_AUTO_LOAD_CONFIG accepting a boolean
value.
Setting neither of these options corresponds to the previous behavior
loading the external OpenSSL configuration automatically.
Fixes#2724Closes#2791
The gcc typecheck macros and coverity combined made it warn on the 2nd
argument for ERROR_CHECK_SETOPT(). Here's minor rearrange to please it.
Coverity CID 1439115 and CID 1439114.
SEC_E_APPLICATION_PROTOCOL_MISMATCH isn't defined in some versions of
mingw and would require an ifdef otherwise.
Reported-by: Thomas Glanzmann
Approved-by: Marc Hörsken
Bug: https://curl.haxx.se/mail/lib-2018-09/0020.htmlCloses#2950
... and add "MAILINDEX".
As described in #2789, this is a suggested solution. Changing UID=xx to
actually get mail with UID xx and add "MAILINDEX" to get a mail with a
special index in the mail box (old behavior). So MAILINDEX=1 gives the
first non deleted mail in the mail box.
Fixes#2789Closes#2815
CURLE_PEER_FAILED_VERIFICATION makes more sense because Curl_parseX509
does not allocate memory internally as its first argument is a pointer
to the certificate structure. The same error code is also returned by
Curl_verifyhost when its call to Curl_parseX509 fails so the change
makes error handling more consistent.
Transparently. The related curl_multi_setopt() options all still returns
OK when pipelining is selected.
To re-enable the support, the single line change in lib/multi.c needs to
be reverted.
See docs/DEPRECATE.md
Closes#2705
According to RFC6265 section 5.4, cookies with equal path lengths
SHOULD be sorted by creation-time (earlier first). This adds a
creation-time record to the cookie struct in order to make cookie
sorting more deterministic. The creation-time is defined as the
order of the cookies in the jar, the first cookie read fro the
jar being the oldest. The creation-time is thus not serialized
into the jar. Also remove the strcmp() matching in the sorting as
there is no lexicographic ordering in RFC6265. Existing tests are
updated to match.
Closes#2524
As uintptr_t and HANDLE are always the same size, this warning is
harmless. Just silence it using an intermediate uintptr_t variable.
Closes https://github.com/curl/curl/pull/2908
1) Using CERT_STORE_OPEN_EXISTING_FLAG ( or CERT_STORE_READONLY_FLAG )
while opening certificate store would be sufficient in this scenario and
less-demanding in sense of required user credentials ( for example,
IIS_IUSRS will get "Access Denied" 0x05 error for existing CertOpenStore
call without any of flags mentioned above ),
2) as 'cert_store_name' is a DWORD, attempt to format its value like a
string ( in "Failed to open cert store" error message ) will throw null
pointer exception
3) adding GetLastError(), in my opinion, will make error message more
useful.
Bug: https://curl.haxx.se/mail/lib-2018-08/0198.htmlCloses#2909
Since GOPHER support was added in curl `?' character was automatically
translated to `%09' (`\t').
However, this behaviour does not seems documented in RFC 4266 and for
search selectors it is documented to directly use `%09' in the URL.
Apart that several gopher servers in the current gopherspace have CGI
support where `?' is used as part of the selector and translating it to
`%09' often leads to surprising results.
Closes#2910
This enables level 4 instead of the default level 3, which of the
currently used comments only allows /* FALLTHROUGH */ to silence the
warning.
Closes https://github.com/curl/curl/pull/2747
Handles created with curl_easy_duphandle do not use the SSL engine set
up in the original handle. This fixes the issue by storing the engine
name in the internal url state and setting the engine from its name
inside curl_easy_duphandle.
Reported-by: Anton Gerasimov
Signed-of-by: Laurent Bonnans
Fixes#2829Closes#2833
If this is the last stream on this connection, the RST_STREAM might not
get pushed to the wire otherwise.
Fixes#2882Closes#2887
Researched-by: Michael Kaufmann
This change allows to use the CMake config files generated by Curl's
CMake scripts for static builds of the library.
The symbol CURL_STATIC lib must be defined to compile downstream,
thus the config package is the perfect place to do so.
Fixes#2817Closes#2823
Reported-by: adnn on github
Reviewed-by: Sergei Nikulov
The verbose message "Authentication using SSH public key file" was
printed each time the ssh_userauth_publickey_auto() was called, which
meant each time a packet was transferred over network because the API
operates in non-blocking mode.
This patch makes sure that the verbose message is printed just once
(when the authentication state is entered by the SSH state machine).
Deal with tiny "HTTP/0.9" (header-less) responses by checking the
status-line early, even before a full "HTTP/" is received to allow
detecting 0.9 properly.
Test 1266 and 1267 added to verify.
Fixes#2420Closes#2872
This allows the use of PKCS#11 URI for certificates and keys without
setting the corresponding type as "ENG" and the engine as "pkcs11"
explicitly. If a PKCS#11 URI is provided for certificate, key,
proxy_certificate or proxy_key, the corresponding type is set as "ENG"
if not provided and the engine is set to "pkcs11" if not provided.
Acked-by: Nikos Mavrogiannopoulos
Closes#2333
Use standard CMake variable BUILD_SHARED_LIBS instead of introducing
custom option CURL_STATICLIB.
Use '-DBUILD_SHARED_LIBS=%SHARED%' in appveyor.yml.
Reviewed-by: Sergei Nikulov
Closes#2755
This restores the ability to build a static lib with
--disable-symbol-hiding to keep non-curl_ symbols.
Researched-by: Dan Fandrich
Reported-by: Ran Mozes
Fixes#2830Closes#2831
Follow-up to 09e401e01b. The SMB protocol handler needs to use its
doing function too, which requires smb_do() to not mark itself as
done...
Closes#2822
This change fixes a regression where redirect body would needlessly be
decompressed even though it was to be ignored anyway. As it happens this
causes secondary issues since there appears to be a bug in apache2 that
it in certain conditions generates a corrupt zlib response. The
regression was created by commit:
dbcced8e32
Discovered-by: Harry Sintonen
Closes#2798
RNG structure must be freed by call to FreeRng after its use in
Curl_cyassl_random. This call fixes Valgrind failures when running the
test suite with wolfSSL.
Closes#2784
This fixes a memory leak when CURLOPT_LOGIN_OPTIONS is used, together with
connection reuse.
I found this with oss-fuzz on GDAL and curl master:
https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=9582
I couldn't reproduce with the oss-fuzz original test case, but looking
at curl source code pointed to this well reproducable leak.
Closes#2790
In the current version, VERSION_GREATER_THAN_EQUAL 6.3 will return false
when run on windows 10.0. This patch addresses that error.
Closes https://github.com/curl/curl/pull/2792
So far, the code tries to pick an authentication method only if
user/password credentials are available, which is not the case for
Bearer authentictation...
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Closes#2754
The Bearer authentication was added to cURL 7.61.0, but there is a
problem: if CURLAUTH_ANY is selected, and the server supports multiple
authentication methods including the Bearer method, we strongly prefer
that latter method (only CURLAUTH_NEGOTIATE beats it), and if the Bearer
authentication fails, we will never even try to attempt any other
method.
This is particularly unfortunate when we already know that we do not
have any Bearer token to work with.
Such a scenario happens e.g. when using Git to push to Visual Studio
Team Services (which supports Basic and Bearer authentication among
other methods) and specifying the Personal Access Token directly in the
URL (this aproach is frequently taken by automated builds).
Let's make sure that we have a Bearer token to work with before we
select the Bearer authentication among the available authentication
methods.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Closes#2754
Follow-up to 1b76c38904. The VTLS backends that close down the TLS
layer for a connection still needs a Curl_easy handle for the session_id
cache etc.
Fixes#2764Closes#2771
... the protocol is doing read/write a lot, so it needs to write often
even when downloading. A more proper fix could check for eactly when it
wants to write and only ask for it then.
Without this fix, an SMB download could easily get stuck when the event-driven
API was used.
Closes#2768
Some servers issue raw deflate data that may be followed by an undocumented
trailer. This commit makes curl tolerate such a trailer of up to 4 bytes
before considering the data is in error.
Reported-by: clbr on github
Fixes#2719
It was previously erroneously skipped in some situations.
libtest/libntlmconnect.c wrongly depended on wrong behavior (that it
would get a zero timeout) when no handles are "running" in a multi
handle. That behavior is no longer present with this fix. Now libcurl
will always return a -1 timeout when all handles are completed.
Closes#2733
Commit 38203f1585 changed engine detection to be version-based,
with a baseline of openssl 1.0.1. This does in fact break builds
with openssl 1.0.0, which has engine support - the configure script
detects that ENGINE_cleanup() is available - but <openssl/engine.h>
doesn't get included to declare it.
According to upstream documentation, engine support was added to
mainstream openssl builds as of version 0.9.7:
https://github.com/openssl/openssl/blob/master/README.ENGINE
This commit drops the version test down to 1.0.0 as version 1.0.0d
is the oldest version I have to test with.
Closes#2732
MinGW warns:
/lib/vtls/schannel.c:219:64: warning: signed and unsigned type in
conditional expression [-Wsign-compare]
Fix this by casting the ptrdiff_t to size_t as we know it's positive.
Closes https://github.com/curl/curl/pull/2721
... not the read buffer size, as that can be set smaller and thus cause
a buffer overflow! CVE-2018-0500
Reported-by: Peter Wu
Bug: https://curl.haxx.se/docs/adv_2018-70a2.html
telnet.c(1401,28): warning: cast from function call of type 'int' to
non-matching type 'HANDLE' (aka 'void *') [-Wbad-function-cast]
Fixes#2696Closes#2700
The code treated the set version as the *exact* version to require in
the TLS handshake, which is not what other TLS backends do and probably
not what most people expect either.
Reported-by: Andreas Olsson
Assisted-by: Gaurav Malhotra
Fixes#2691Closes#2694
... and trim the threaded Curl_resolver_getsock() to return zero
millisecond wait times during the first three milliseconds so that
localhost or names in the OS resolver cache gets detected and used
faster.
Closes#2685
By masking sure to use the *current* easy handle with extracted
connections from the cache, and make sure to NULLify the ->data pointer
when the connection is put into the cache to make this mistake easier to
detect in the future.
Reported-by: Will Dietz
Fixes#2669Closes#2672
When the application just started the transfer and then stops it while
the name resolve in the background thread hasn't completed, we need to
wait for the resolve to complete and then cleanup data accordingly.
Enabled test 1553 again and added test 1590 to also check when the host
name resolves successfully.
Detected by OSS-fuzz.
Closes#1968
certdata.txt should be deleted also when the process is interrupted by
"same certificate downloaded, exiting"
The certdata.txt is currently kept on disk even if you give the -u
option
Closes#2655
with clang-6.0:
```
vtls/schannel_verify.c: In function 'add_certs_to_store':
vtls/schannel_verify.c:212:30: warning: passing argument 11 of 'CryptQueryObject' from incompatible pointer type [-Wincompatible-pointer-types]
&cert_context)) {
^
In file included from /usr/share/mingw-w64/include/schannel.h:10:0,
from /usr/share/mingw-w64/include/schnlsp.h:9,
from vtls/schannel.h:29,
from vtls/schannel_verify.c:40:
/usr/share/mingw-w64/include/wincrypt.h:4437:26: note: expected 'const void **' but argument is of type 'CERT_CONTEXT ** {aka struct _CERT_CONTEXT **}'
WINIMPM WINBOOL WINAPI CryptQueryObject (DWORD dwObjectType, const void *pvObject, DWORD dwExpectedContentTypeFlags, DWORD dwExpectedFormatTypeFlags, DWORD dwFlags,
^~~~~~~~~~~~~~~~
```
Ref: https://msdn.microsoft.com/library/windows/desktop/aa380264
Closes https://github.com/curl/curl/pull/2648
Given the contstraints of SChannel, I'm exposing these as the algorithms
themselves instead; while replicating the ciphersuite as specified by
OpenSSL would have been preferable, I found no way in the SChannel API
to do so.
To use this from the commandline, you need to pass the names of contants
defining the desired algorithms. For example, curl --ciphers
"CALG_SHA1:CALG_RSA_SIGN:CALG_RSA_KEYX:CALG_AES_128:CALG_DH_EPHEM"
https://github.com The specific names come from wincrypt.h
Closes#2630
- Get rid of variable that was generating false positive warning
(unitialized)
- Fix issues in tests
- Reduce scope of several variables all over
etc
Closes#2631
Previously it was checked for in configure/cmake, but that would then
leave other build systems built without engine support.
While engine support probably existed prior to 1.0.1, I decided to play
safe. If someone experience a problem with this, we can widen the
version check.
Fixes#2641Closes#2644
