By avoiding an unnecessary error check and the temp use of the tm
struct, the time2epoch conversion function gets a little bit faster.
When repeating test 517, the updated version is perhaps 1% faster (on
one particular build on one particular architecture).
Closes#5985
If the received PASV response doesn't match the expected pattern, we
could end up reading uninitialized integers for IP address and port
number.
Issue pointed out by muse.dev
Closes#5972
Also skip pre-checking sockets to set timeout_ms to 0
after the first socket has been detected to be ready.
Reviewed-by: rcombs on github
Reviewed-by: Daniel Stenberg
Follow up to #5886
Since the struct is quite large (1 long and 10 ints) we
declare it once at the beginning of the function instead
of multiple times inside loops to avoid stack movements.
Reviewed-by: Viktor Szakats
Reviewed-by: Daniel Stenberg
Closes#5886
This is primarily interesting for cases where CURLOPT_NOBODY is set as
previously curl would not return an error for this case.
MDTM getting 550 now also returns this error (it returned
CURLE_FTP_COULDNT_RETR_FILE before) in order to unify return codes for
missing files across protocols and specific FTP commands.
libcurl already returns error on a 550 as a MDTM response (when
CURLOPT_FILETIME is set). If CURLOPT_NOBODY is not set, an error would
happen subsequently anyway since the RETR command would fail.
Add test 1913 and 1914 to verify. Updated several tests accordingly due
to the updated SIZE behavior.
Reported-by: Tomas Berger
Fixes#5953Closes#5957
... when continuing a transfer from a FETCH response.
When the size of the file was small enough that the entirety of the
transfer happens in a single go and schannel buffers holds the entire
data. However, it wasn't completely read in Curl_pp_readresp since a
line break was found before that could happen. So, by the time we are in
imap_state_fetch_resp - there's data in buffers that needs to be read
via Curl_read but nothing to read from the socket. After we setup a
transfer (Curl_setup_transfer), curl just waits on the socket state to
change - which doesn't happen since no new data ever comes.
Closes#5961
Previously there were several locations that called
nghttp2_session_mem_recv and handled responses slightly differently.
Those have been converted to call the existing
h2_process_pending_input() function.
Moved the end-of-session check to h2_process_pending_input() since the
only place the end-of-session state can change is after nghttp2
processes additional input frames.
This will likely fix the fuzzing error. While I don't have a root cause
the out-of-bounds read seems like a use after free, so moving the
nghttp2_session_check_request_allowed() call to a location with a
guaranteed nghttp2 session seems reasonable.
Also updated a few nghttp2 callsites to include error messages and added
a few additional error checks.
Closes#5648
configure --enable-debug now enables -Wassign-enum with clang,
identifying several enum "abuses" also fixed.
Reported-by: Gisle Vanem
Bug: 879007f811 (commitcomment-42087553)Closes#5929
If the error reason from the lib is
SSL_R_SSLV3_ALERT_CERTIFICATE_EXPIRED, libcurl will return
CURLE_PEER_FAILED_VERIFICATION and not CURLE_SSL_CONNECT_ERROR.
This unifies the libcurl return code and makes libressl run test 313
(CRL testing) fine.
Closes#5934
The cache content is not duplicated, like other caches, but the setting
and specified file name are.
Test 1908 is extended to verify this somewhat. Since the duplicated
handle gets the same file name, the test unfortunately overwrites the
same file twice (with different contents) which makes it hard to check
automatically.
Closes#5923
The code section that is OpenSSL 3+ specific now uses the same logic as
is used in the version < 3 section. It caused a compiler error without
it.
Closes#5907
Drop dynamic loading of ws2_32.dll and instead rely on the
imported version which is now required to be at least 2.2.
Reviewed-by: Marcel Raad
Reviewed-by: Jay Satiro
Reviewed-by: Daniel Stenberg
Reviewed-by: Viktor Szakats
Closes#5854
IPv6, telnet and now also the multi API require WinSock
version 2 which is available starting with Windows 95.
Therefore we think it is time to drop support for version 1.
Reviewed-by: Marcel Raad
Reviewed-by: Jay Satiro
Reviewed-by: Daniel Stenberg
Reviewed-by: Viktor Szakats
Follow up to #5634Closes#5854
The poll emulation via select already consumes POLLRDNORM,
POLLWRNORM and POLLRDBAND as input events. Therefore it
should also return them as output events if signaled.
Also fix indentation in input event handling block.
Assisted-by: Jay Satiro
Reviewed-by: Daniel Stenberg
Replaces #5852Closes#5883
`USE_WINDOWS_SSPI` without `USE_WIN32_CRYPTO` but with any other DES
backend is fine, but was excluded before.
This also fixes test 1013 as the condition for SMB support in
configure.ac didn't match the condition in the source code. Now it
does.
Fixes https://github.com/curl/curl/issues/1262
Closes https://github.com/curl/curl/pull/5771
poll and select already return -1 on error according to POSIX,
so there is no need to perform a <0 to -1 conversion in code.
Also we can just use one check with <= 0 on the return code.
Assisted-by: Daniel Stenberg
Reviewed-by: Jay Satiro
Replaces #5852Closes#5880
Learn from the way Cygwin handles and maps the WinSock events
to simulate correct and complete poll and select behaviour
according to Richard W. Stevens Network Programming book.
Reviewed-by: Jay Satiro
Reviewed-by: Marcel Raad
Follow up to #5634Closes#5867
Setting a timeout to INT_MAX could cause an immediate error to get
returned as timeout because of an overflow when different values of
'now' were used.
This is primarily fixed by having Curl_pgrsTime() return the "now" when
TIMER_STARTSINGLE is set so that the parent function will continue using
that time.
Reported-by: Ionuț-Francisc Oancea
Fixes#5583Closes#5847
USE_TLS_SRP will be true if *any* selected TLS backend can use SRP
HAVE_OPENSSL_SRP is defined when OpenSSL can use it
HAVE_GNUTLS_SRP is defined when GnuTLS can use it
Clarify in the curl_verison_info docs that CURL_VERSION_TLSAUTH_SRP is
set if at least one of the supported backends offers SRP.
Reported-by: Stefan Strogin
Fixes#5865Closes#5870
const struct curl_easyoption *curl_easy_option_by_name(const char *name);
const struct curl_easyoption *curl_easy_option_by_id (CURLoption id);
const struct curl_easyoption *
curl_easy_option_next(const struct curl_easyoption *prev);
The purpose is to provide detailed enough information to allow for
example libcurl bindings to get option information at run-time about
what easy options that exist and what arguments they expect.
Assisted-by: Jeroen Ooms
Closes#5365
The get_cert_location function allocates memory only on success.
Previously get_cert_location was able to allocate memory and return
error. It wasn't obvious and in this case the memory wasn't
released.
Fixes#5855Closes#5860
Check readiness of all sockets before waiting on them
to avoid locking in case the one-time event FD_WRITE
was already consumed by a previous wait operation.
More information about WinSock network events:
https://docs.microsoft.com/en-us/windows/win32/api/
winsock2/nf-winsock2-wsaeventselect#return-value
Closes#5634
This avoids using a pair of TCP ports to provide wakeup functionality
for every multi instance on Windows, where socketpair() is emulated
using a TCP socket on loopback which could in turn lead to socket
resource exhaustion.
A previous version of this patch failed to account for how in WinSock,
FD_WRITE is set only once when writing becomes possible and not again
until after a send has failed due to the buffer filling. This contrasts
to how FD_READ and FD_OOB continue to be set until the conditions they
refer to no longer apply. This meant that if a user wrote some data to
a socket, but not enough data to completely fill its send buffer, then
waited on that socket to become writable, we'd erroneously stall until
their configured timeout rather than returning immediately.
This version of the patch addresses that issue by checking each socket
we're waiting on to become writable with select() before the wait, and
zeroing the timeout if it's already writable.
Assisted-by: Marc Hörsken
Reviewed-by: Marcel Raad
Reviewed-by: Daniel Stenberg
Tested-by: Gergely Nagy
Tested-by: Rasmus Melchior Jacobsen
Tested-by: Tomas Berger
Replaces #5397
Reverts #5632Closes#5634
Change Curl_socket_check to use select-fallback in Curl_poll
instead of implementing it in Curl_socket_check and Curl_poll.
Reviewed-by: Daniel Stenberg
Reviewed-by: Jay Satiro
Replaces #5262 and #5492Closes#5707
This commit changes Curl_socket_check to use POLLPRI to
check for connect failure on the write socket, because
POLLPRI maps to fds_err. This is in line with select(2).
The select-based socket check correctly checks for connect
failures by adding the write socket also to fds_err.
The poll-based implementation (which internally can itself
fallback to select again) did not previously check for
connect failure by using POLLPRI with the write socket.
See the follow up commit to this for more information.
This commit makes sure connect failures can be detected
and handled if HAVE_POLL_FINE is defined, eg. on msys2-devel.
Reviewed-by: Daniel Stenberg
Reviewed-by: Jay Satiro
Replaces #5509
Prepares #5707
The buffer only exists during transfer and then we shouldn't change the
size (the setopt is not documented to work then).
Reported-by: Harry Sintonen
Closes#5842
Failures clearly returned from a (SOCKS) proxy now causes this return
code. Previously the situation was not very clear as what would be
returned and when.
In addition: when this error code is returned, an application can use
CURLINFO_PROXY_ERROR to query libcurl for the detailed error, which then
returns a value from the new 'CURLproxycode' enum.
Closes#5770
... not newline separated from the previous line. This makes it output
asterisk prefixed properly like other verbose putput!
Reported-by: jmdavitt on github
Fixes#5826Closes#5827
This flag was applied to the connection struct that is released on
retry. These changes move the retry counter into Curl_easy struct that
lives across retries and retains the new connection.
Reported-by: Cherish98 on github
Fixes#5794Closes#5800
The debug output used ssherr instead of sftperr which not only outputs
the wrong error code but also casues a warning on Windows.
Follow-up to 7370b4e39f
Reported-by: Gisle Vanem
Bug: 7370b4e39f (r41334700)Closes#5799
The shutdown function is for downgrading a connection from TLS to plain,
and this is not requested here.
Have ssl_close reset the TLS connection state.
This partially reverts commit f002c850d9
Reported-by: Rasmus Melchior Jacobsen
Reported-by: Denis Goleshchikhin
Fixes#5797
The previous h2 trailer fix in 54a2b63 was wrong and caused a
regression: it cannot deal with trailers immediately when read since
they may be read off the connection by the wrong 'data' owner.
This change reverts the logic back to gathering all trailers into a
single buffer, like before 54a2b63.
Reported-by: Tadej Vengust
Fixes#5663Closes#5769
Classic mingw and 10y+ old versions of mingw-w64 don't ship with
Windows headers having the typedef necessary for Unix Sockets
support, so try detecting these environments to disable this
feature.
Ref: cf6afc5717/
Reviewed-by: Daniel Stenberg
Fixes#5674Closes#5758
Previously any connect-only connections in a multi handle would be kept
alive until the multi handle was closed. Since these connections cannot
be re-used, they can be marked for closure when the associated easy
handle is removed from the multi handle.
Closes#5749
They're not thread-safe so they should not be used in libcurl code.
Explictly enabled when deemed necessary and in examples and tests
Reviewed-by: Nicolas Sterchele
Closes#5732
Previously a file that isn't user-readable but is user-writable would
not be properly avoided and would get overwritten.
Reported-by: BrumBrum on hackerone
Assisted-by: Jay Satiro
Bug: https://hackerone.com/reports/926638Closes#5731
Since 09b9fc900 (multi: remove 'Curl_one_easy' struct, phase 1,
2013-08-02), the easy handle list is not circular but ends with
->next pointing to NULL.
Reported-by: Masaya Suzuki <masayasuzuki@google.com>
Closes#5737
Unsetting CURLOPT_NOBODY with 0L when doing HTTP has no documented
action but before 7.71.0 that used to switch back to GET and with this
change (assuming the method is still set to HEAD) this behavior is
brought back.
Reported-by: causal-agent on github
Fixes#5725Closes#5728
Stack overflows can occur with precisions for integers and floats.
Proof of concepts:
- curl_mprintf("%d, %.*1$d", 500, 1);
- curl_mprintf("%d, %+0500.*1$f", 500, 1);
Ideally, compile with -fsanitize=address which makes this undefined
behavior a bit more defined for debug purposes.
The format strings are valid. The overflows occur due to invalid
arguments. If these arguments are variables with contents controlled
by an attacker, the function's stack can be corrupted.
Also see CVE-2016-9586 which partially fixed the float aspect.
Signed-off-by: Tobias Stoeckmann <tobias@stoeckmann.org>
Closes https://github.com/curl/curl/pull/5722
Verify that specified parameters are in range. If parameters are too
large, fail early on and avoid out of boundary accesses.
Also do not read behind boundaries of illegal format strings.
These are defensive measures since it is expected that format strings
are well-formed. Format strings should not be modifiable by user
input due to possible generic format string attacks.
Closes https://github.com/curl/curl/pull/5722
They are marked as deprecated for -mmacosx-version-min >= 10.15,
which might result in warnings-as-errors.
Closes https://github.com/curl/curl/pull/5695
It confuses code analyzers with its use of -1 for unsigned value. Also,
a check that's not normally used in strdup() code - and not necessary.
Closes#5697
Provide the HTTP method that was used on the latest request, which might
be relevant for users when there was one or more redirects involved.
Closes#5511
Use the unsigned type (size_t) in the arithmetic of pointers. In this
context, the signed type (ssize_t) is used unnecessarily.
Authored-by: ihsinme on github
Closes#5654
include zstd curl patch for Makefile.m32 from vszakats
and include Add CMake support for zstd from Peter Wu
Helped-by: Viktor Szakats
Helped-by: Peter Wu
Closes#5453
`http_proxy`/`proxy_ssl`/`tunnel_proxy` will not be available in `conn`
if `CURL_DISABLE_PROXY` is enabled. Repair the build with that
configuration.
Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Closes#5645
Well-behaving HTTP2 servers send two GOAWAY messages. The first
message is a warning that indicates that the server is going to
stop accepting streams. The second one actually closes the stream.
nghttp2 reports this state (and the other state of no more stream
identifiers) via the call nghttp2_session_check_request_allowed().
In this state the client should not create more streams on the
session (tcp connection), and in curl this means that the server
has requested that the connection is closed.
It would be also be possible to put the connclose() call into the
on_http2_frame_recv() function that triggers on the GOAWAY message.
This fixes a bug seen when the client sees the following sequence of
frames:
// advisory GOAWAY
HTTP2 GOAWAY [stream-id = 0, promised-stream-id = -1]
... some additional frames
// final GOAWAY
HTTP2 GOAWAY [stream-id = 0, promised-stream-id = N ]
Before this change, curl will attempt to reuse the connection even
after the last stream, will encounter this error:
* Found bundle for host localhost: 0x5595f0a694e0 [can multiplex]
* Re-using existing connection! (#0) with host localhost
* Connected to localhost (::1) port 10443 (#0)
* Using Stream ID: 9 (easy handle 0x5595f0a72e30)
> GET /index.html?5 HTTP/2
> Host: localhost:10443
> user-agent: curl/7.68.0
> accept: */*
>
* stopped the pause stream!
* Connection #0 to host localhost left intact
curl: (16) Error in the HTTP2 framing layer
This error may posion the connection cache, causing future requests
which resolve to the same curl connection to go through the same error
path.
Closes#5643
Confusingly, nghttp2 has two different error code enums:
- nghttp2_error, to be used with nghttp2_strerror
- nghttp2_error_code, to be used with nghttp2_http2_strerror
Closes#5641
Since commit f3d501dc67, if proxy support is disabled, MSVC warns:
url.c : warning C4701: potentially uninitialized local variable
'hostaddr' used
url.c : error C4703: potentially uninitialized local pointer variable
'hostaddr' used
That could actually only happen if both `conn->bits.proxy` and
`CURL_DISABLE_PROXY` were enabled.
Initialize it to NULL to silence the warning.
Closes https://github.com/curl/curl/pull/5638
Updated terminology in docs, comments and phrases to refer to C strings
as "null-terminated". Done to unify with how most other C oriented docs
refer of them and what users in general seem to prefer (based on a
single highly unscientific poll on twitter).
Reported-by: coinhubs on github
Fixes#5598Closes#5608
Don't reference fields that do not exist. Fixes build failure:
vtls/mbedtls.c: In function 'mbed_connect_step1':
vtls/mbedtls.c:249:54: error: 'struct connectdata' has no member named 'http_proxy'
Closes#5615
...previously CURLINFO_EFFECTIVE_URL would report the URL of the
original "mother transfer", not the actually pushed resource.
Reported-by: Jonathan Cardoso Machado
Fixes#5589Closes#5591
- Include wincrypt before OpenSSL includes so that the latter can
properly handle any conflicts between the two.
Closes https://github.com/curl/curl/pull/5606
Replace "Failed writing body (X != Y)" with
"Failure writing output to destination". Possibly slightly less cryptic.
Reported-by: coinhubs on github
Fixes#5594Closes#5596
Follow-up to c4e6968127
When a new transfer is created, as a resuly of an acknowledged push,
that transfer needs a download buffer allocated.
Closes#5590
This commit changes the behavior of CURLSSLOPT_NATIVE_CA so that it does
not override CURLOPT_CAINFO / CURLOPT_CAPATH, or the hardcoded default
locations. Instead the CA store can now be used at the same time.
The change is due to the impending release. The issue is still being
discussed. The behavior of CURLSSLOPT_NATIVE_CA is subject to change and
is now documented as experimental.
Ref: bc052cc (parent commit)
Ref: https://github.com/curl/curl/issues/5585
For QUIC but also for regular TCP when the second family runs out of IPs
with a failure while the first family is still trying to connect.
Separated the timeout handling for IPv4 and IPv6 connections when they
both have a number of addresses to iterate over.
This avoids using a pair of TCP ports to provide wakeup functionality
for every multi instance on Windows, where socketpair() is emulated
using a TCP socket on loopback which could in turn lead to socket
resource exhaustion.
Reviewed-by: Gergely Nagy
Reviewed-by: Marc Hörsken
Closes#5397
When wolfSSL is built with its OpenSSL API layer, it fetures the same DES*
functions that OpenSSL has. This change take advantage of that.
Co-authored-by: Daniel Stenberg
Closes#5556Fixes#5548
Since the connection can be used by many independent requests (using
HTTP/2 or HTTP/3), things like user-agent and other transfer-specific
data MUST NOT be kept connection oriented as it could lead to requests
getting the wrong string for their requests. This struct data was
lingering like this due to old HTTP1 legacy thinking where it didn't
mattered..
Fixes#5566Closes#5567
When asking for a specific feature to be shared in the share object,
that bit was previously set unconditionally even if the shared feature
failed or otherwise wouldn't work.
Closes#5554
Instead of discussing if there's value or meaning (implied or not) in
the colors, let's use words without the same possibly negative
associations.
Closes#5546
The SOCKS4/5 state machines weren't properly terminated when the proxy
connection got closed, leading to a busy-loop.
Reported-By: zloi-user on github
Fixes#5532Closes#5542
To reduce the amount of allocations needed for creating a Curl_addrinfo
struct, make a single larger malloc instead of three separate smaller
ones.
Closes#5533
quiche now requires the application to explicitly set the keylog path
for each connection, rather than reading the environment variable
itself.
Closes#5541
Now that all functions in select.[ch] take timediff_t instead
of the limited int or long, we can remove type conversions
and related preprocessor checks to silence compiler warnings.
Avoiding conversions from time_t was already done in 842f73de.
Based upon #5262
Supersedes #5214, #5220 and #5221
Follow up to #5343 and #5479Closes#5490
On some systems, openssl 1.0.x is still the default, but it has been
patched to contain all the recent security fixes. As a result of this
patching, it is possible for macro X509_V_FLAG_NO_ALT_CHAINS to be
defined, while the previous behavior of openssl to not look at trusted
chains first, remains.
Fix it: ensure X509_V_FLAG_TRUSTED_FIRST is always set, do not try to
probe for the behavior of openssl based on the existence ofmacros.
Closes#5530
Commit 4a4b63d forgot to set the expected SOCKS5 reply length when the
reply ATYP is X'01'. This resulted in erroneously expecting more bytes
when the request length is greater than the reply length (e.g., when
remotely resolving the hostname).
Closes#5527
When the method is updated inside libcurl we must still not change the
method as set by the user as then repeated transfers with that same
handle might not execute the same operation anymore!
This fixes the libcurl part of #5462
Test 1633 added to verify.
Closes#5499
`http_proxy` will not be available in `conndata` if `CURL_DISABLE_PROXY`
is enabled. Repair the build with that configuration.
Follow-up to f3d501dc67Closes#5498
"Null-checking k->str suggests that it may be null, but it has already
been dereferenced on all paths leading to the check" - and it can't
legally be NULL at this point. Remove check.
Detected by Coverity CID 1463884
Closes#5495
Since Win32 almost always will also have USE_WINSOCK,
we can reduce complexity and always use Sleep there.
Assisted-by: Jay Satiro
Reviewed-by: Daniel Stenberg
Follow up to #5343Closes#5489
... and free it as soon as the transfer is done. It removes the extra
alloc when a new size is set with setopt() and reduces memory for unused
easy handles.
In addition: the closure_handle now doesn't use an allocated buffer at
all but the smallest supported size as a stack based one.
Closes#5472
Using time_t and suseconds_t if suseconds_t is available,
long on Windows (maybe others in the future) and int elsewhere.
Also handle case of ULONG_MAX being greater or equal to INFINITE.
Assisted-by: Jay Satiro
Reviewed-by: Daniel Stenberg
Part of #5343
Make all functions in select.[ch] take timeout_ms as timediff_t
which should always be large enough and signed on all platforms
to take all possible timeout values and avoid type conversions.
Reviewed-by: Jay Satiro
Reviewed-by: Daniel Stenberg
Replaces #5107 and partially #5262
Related to #5240 and #5286Closes#5343
Tested with ngtcp2 built against the OpenSSL library. Additionally
tested with MultiSSL (NSS for TLS and ngtcp2+OpenSSL for QUIC).
The TLS backend (independent of QUIC) may or may not already have opened
the keylog file before. Therefore Curl_tls_keylog_open is always called
to ensure the file is open.
Tested following the same curl and tshark commands as in commit
"vtls: Extract and simplify key log file handling from OpenSSL" using
WolfSSL v4.4.0-stable-128-g5179503e8 from git master built with
`./configure --enable-all --enable-debug CFLAGS=-DHAVE_SECRET_CALLBACK`.
Full support for this feature requires certain wolfSSL build options,
see "Availability note" in lib/vtls/wolfssl.c for details.
Closes#5327
Create a set of routines for TLS key log file handling to enable reuse
with other TLS backends. Simplify the OpenSSL backend as follows:
- Drop the ENABLE_SSLKEYLOGFILE macro as it is unconditionally enabled.
- Do not perform dynamic memory allocation when preparing a log entry.
Unless the TLS specifications change we can suffice with a reasonable
fixed-size buffer.
- Simplify state tracking when SSL_CTX_set_keylog_callback is
unavailable. My original sslkeylog.c code included this tracking in
order to handle multiple calls to SSL_connect and detect new keys
after renegotiation (via SSL_read/SSL_write). For curl however we can
be sure that a single master secret eventually becomes available
after SSL_connect, so a simple flag is sufficient. An alternative to
the flag is examining SSL_state(), but this seems more complex and is
not pursued. Capturing keys after server renegotiation was already
unsupported in curl and remains unsupported.
Tested with curl built against OpenSSL 0.9.8zh, 1.0.2u, and 1.1.1f
(`SSLKEYLOGFILE=keys.txt curl -vkso /dev/null https://localhost:4433`)
against an OpenSSL 1.1.1f server configured with:
# Force non-TLSv1.3, use TLSv1.0 since 0.9.8 fails with 1.1 or 1.2
openssl s_server -www -tls1
# Likewise, but fail the server handshake.
openssl s_server -www -tls1 -Verify 2
# TLS 1.3 test. No need to test the failing server handshake.
openssl s_server -www -tls1_3
Verify that all secrets (1 for TLS 1.0, 4 for TLS 1.3) are correctly
written using Wireshark. For the first and third case, expect four
matches per connection (decrypted Server Finished, Client Finished, HTTP
Request, HTTP Response). For the second case where the handshake fails,
expect a decrypted Server Finished only.
tshark -i lo -pf tcp -otls.keylog_file:keys.txt -Tfields \
-eframe.number -eframe.time -etcp.stream -e_ws.col.Info \
-dtls.port==4433,http -ohttp.desegment_body:FALSE \
-Y 'tls.handshake.verify_data or http'
A single connection can easily be identified via the `tcp.stream` field.
For HTTP 1.x, it's a protocol error when the server sends more bytes
than announced. If this happens, don't reuse the connection, because the
start position of the next response is undefined.
Closes#5440
When USE_RESOLVE_ON_IPS is set (defined on macOS), it means that
numerical IP addresses still need to get "resolved" - but not with DoH.
Reported-by: Viktor Szakats
Fixes#5454Closes#5459
They're only limited to the maximum string input restrictions, not to
256 bytes.
Added test 1178 to verify
Reported-by: Will Roberts
Fixes#5448Closes#5449
Fixed the alt-svc parser to treat a newline as end of line.
The unit tests in test 1654 were done without CRLF and thus didn't quite
match the real world. Now they use CRLF as well.
Reported-by: Peter Wu
Assisted-by: Peter Wu
Assisted-by: Jay Satiro
Fixes#5445Closes#5446
This reverts commit 74623551f3.
Instead mark the function call with (void). Getting the return code and
using it instead triggered Coverity warning CID 1463596 because
snprintf() can return a negative value...
Closes#5441
... as returning a "" is not a good idea as the string is supposed to be
allocated and returning a const string will cause issues.
Reported-by: Brian Carpenter
Follow-up to ed35d6590eCloses#5405
This change introduces a generic way to provide binary data in setopt
options, called BLOBs.
This change introduces these new setopts:
CURLOPT_ISSUERCERT_BLOB, CURLOPT_PROXY_SSLCERT_BLOB,
CURLOPT_PROXY_SSLKEY_BLOB, CURLOPT_SSLCERT_BLOB and CURLOPT_SSLKEY_BLOB.
Reviewed-by: Daniel Stenberg
Closes#5357
- Stick to a single unified way to use structs
- Make checksrc complain on 'typedef struct {'
- Allow them in tests, public headers and examples
- Let MD4_CTX, MD5_CTX, and SHA256_CTX typedefs remain as they actually
typedef different types/structs depending on build conditions.
Closes#5338
Previously, after PASV and immediately after the data connection has
connected, the function would only return the control socket to wait for
which then made the data connection simply timeout and not get polled
correctly. This become obvious when running test 1631 and 1632 event-
based.
Use them only if `_UNICODE` is defined, in which case command-line
arguments have been converted to UTF-8.
Closes https://github.com/curl/curl/pull/3784
- use `wmain` instead of `main` when `_UNICODE` is defined [0]
- define `argv_item_t` as `wchar_t *` in this case
- use the curl_multibyte gear to convert the command-line arguments to
UTF-8
This makes it possible to pass parameters with characters outside of
the current locale on Windows, which is required for some tests, e.g.
the IDN tests. Out of the box, this currently only works with the
Visual Studio project files, which default to Unicode, and winbuild
with the `ENABLE_UNICODE` option.
[0] https://devblogs.microsoft.com/oldnewthing/?p=40643
Ref: https://github.com/curl/curl/issues/3747
Closes https://github.com/curl/curl/pull/3784
Fix theoretical integer overflow in Curl_auth_create_plain_message.
The security impact of the overflow was discussed on hackerone. We
agreed this is more of a theoretical vulnerability, as the integer
overflow would only be triggerable on systems using 32-bits size_t with
over 4GB of available memory space for the process.
Closes#5391
Since input passed to libcurl with CURLOPT_USERPWD and
CURLOPT_PROXYUSERPWD circumvents the regular string length check we have
in Curl_setstropt(), the input length limit is enforced in
Curl_parse_login_details too, separately.
Reported-by: Thomas Bouzerar
Closes#5383
When looking for a protocol match among supported schemes, check the
most "popular" schemes first. It has zero functionality difference and
for all practical purposes a speed difference will not be measureable
but it still think it makes sense to put the least likely matches last.
"Popularity" based on the 2019 user survey.
Closes#5377
Add three new CMake Find modules (using the curl license, but I grant
others the right to apply the CMake BSD license instead).
This CMake config is simpler than the autotools one because it assumes
ngtcp2 and nghttp3 to be used together. Another difference is that this
CMake config checks whether QUIC is actually supported by the TLS
library (patched OpenSSL or boringssl) since this can be a common
configuration mistake that could result in build errors later.
Unlike autotools, CMake does not warn you that the features are
experimental. The user is supposed to already know that and read the
documentation. It requires a very special build environment anyway.
Tested with ngtcp2+OpenSSL+nghttp3 and quiche+boringssl, both built from
current git master. Use `LD_DEBUG=files src/curl |& grep need` to figure
out which features (libldap-2.4, libssh2) to disable due to conflicts
with boringssl.
Closes#5359
If the QLOGDIR environment variable is set, enable qlogging.
... and create Curl_qlogdir() in the new generic vquic/vquic.c file for
QUIC functions that are backend independent.
Closes#5353
That return code is reserved for build-time conditional code not being
present while this was a regular run-time error from a Windows API.
Reported-by: wangp on github
Fixes#5349Closes#5350
Triggered by a crash detected by OSS-Fuzz after the dynbuf introduction in
ed35d6590e. This should make the trailer handling more straight forward and
hopefully less error-prone.
Deliver the trailer header to the callback already at receive-time. No
longer caches the trailers to get delivered at end of stream.
Bug: https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=22030Closes#5348
In my very basic test that lists sftp://127.0.0.1/tmp/, this patched
code makes 161 allocations compared to 194 in git master. A 17%
reduction.
Closes#5336
quiche has the potential to log qlog files. To enable this, you must
build quiche with the qlog feature enabled `cargo build --features
qlog`. curl then passes a file descriptor to quiche, which takes
ownership of the file. The FD transfer only works on UNIX.
The convention is to enable logging when the QLOGDIR environment is
set. This should be a path to a folder where files are written with the
naming template <SCID>.qlog.
Co-authored-by: Lucas Pardue
Replaces #5337Closes#5341
A common set of functions instead of many separate implementations for
creating buffers that can grow when appending data to them. Existing
functionality has been ported over.
In my early basic testing, the total number of allocations seem at
roughly the same amount as before, possibly a few less.
See docs/DYNBUF.md for a description of the API.
Closes#5300
- Check for NULL entry parameter before attempting to deref entry in
Curl_resolver_is_resolved, like is already done in asyn-ares.
This is to silence cppcheck which does not seem to understand that
asyn-ares and asyn-thread have separate Curl_resolver_is_resolved
and those units are mutually exclusive. Prior to this change it warned
of a scenario where asyn-thread's Curl_resolver_is_resolved is called
with a NULL entry from asyn-ares, but that couldn't happen.
Reported-by: rl1987@users.noreply.github.com
Fixes https://github.com/curl/curl/issues/5326
More connection cache accesses are protected by locks.
CONNCACHE_* is a beter prefix for the connection cache lock macros.
Curl_attach_connnection: now called as soon as there's a connection
struct available and before the connection is added to the connection
cache.
Curl_disconnect: now assumes that the connection is already removed from
the connection cache.
Ref: #4915Closes#5009
Regression since 7.69.0 and 68fb25fa3f.
The code wrongly assigned 'from' instead of 'auth' which probably was a
copy and paste mistake from other code, leading to that auth could
remain NULL and later cause an error to be returned.
Assisted-by: Eric Sauvageau
Fixes#5294Closes#5295
Previously, options set explicitly through command line options could be
overridden by the configuration files parsed automatically when
ssh_connect() was called.
By calling ssh_options_parse_config() explicitly, the configuration
files are parsed before setting the options, avoiding the options
override. Once the configuration files are parsed, the automatic
configuration parsing is not executed.
Fixes#4972Closes#5283
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Coverity found CID 1461718:
Integer handling issues (CONSTANT_EXPRESSION_RESULT) "timeout_ms >
9223372036854775807L" is always false regardless of the values of its
operands. This occurs as the logical second operand of "||".
Closes#5240
Prior to this change if there was a 303 reply to a PUT request then
the subsequent request to respond to that redirect would also be a PUT.
It was determined that was most likely incorrect based on the language
of the RFCs. Basically 303 means "see other" resource, which implies it
is most likely not the same resource, therefore we should not try to PUT
to that different resource.
Refer to the discussions in #5237 and #5248 for more information.
Fixes https://github.com/curl/curl/issues/5237
Closes https://github.com/curl/curl/pull/5248
GnuTLS 3.1.10 added new functions we want to use. That version was
released on Mar 22, 2013. Removing support for older versions also
greatly simplifies the code.
Ref: #5271Closes#5276
Detected by Coverity. CID 1462319.
"The same code is executed when the condition result is true or false,
because the code in the if-then branch and after the if statement is
identical."
Closes#5275
When cURL is compiled with support for multiple SSL backends, it is
possible to configure an SSL backend via `curl_global_sslset()`, but
only *before* `curl_global_init()` was called.
If another SSL backend should be used after that, a user might be
tempted to call `curl_global_cleanup()` to start over. However, we did
not foresee that use case and forgot to reset the SSL backend in that
cleanup.
Let's allow that use case.
Fixes#5255Closes#5257
Reported-by: davidedec on github
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
From libssh 0.9.0, ssh_key_type() returns different key types for ECDSA
keys depending on the curve.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Fixes#5252Closes#5253
- Fix schannel_send for the case when no timeout was set.
Prior to this change schannel would error if the socket was not ready
to send data and no timeout was set.
This commit is similar to parent commit 89dc6e0 which recently made the
same change for SOCKS, for the same reason. Basically it was not well
understood that when Curl_timeleft returns 0 it is not a timeout of 0 ms
but actually means no timeout.
Fixes https://github.com/curl/curl/issues/5177
Closes https://github.com/curl/curl/pull/5221
- Document in Curl_timeleft's comment block that returning 0 signals no
timeout (ie there's infinite time left).
- Fix SOCKS' Curl_blockread_all for the case when no timeout was set.
Prior to this change if the timeout had a value of 0 and that was passed
to SOCKET_READABLE it would return right away instead of blocking. That
was likely because it was not well understood that when Curl_timeleft
returns 0 it is not a timeout of 0 ms but actually means no timeout.
Ref: https://github.com/curl/curl/pull/5214#issuecomment-612512360
Closes https://github.com/curl/curl/pull/5220
Prior to this change gopher's blocking code would block forever,
ignoring any set timeout value.
Assisted-by: Jay Satiro
Reviewed-by: Daniel Stenberg
Similar to #5220 and #5221Closes#5214
When SRP is requested in the priority string, GnuTLS will disable
support for TLS 1.3. Before this change, curl would always add +SRP to
the priority list, effectively always disabling TLS 1.3 support.
With this change, +SRP is only added to the priority list when SRP
authentication is also requested. This also allows updating the error
handling here to not have to retry without SRP. This is because SRP is
only added when requested and in that case a retry is not needed.
Closes#5223
- If loss of data may occur converting a timediff_t to time_t and
the time value is > TIME_T_MAX then treat it as TIME_T_MAX.
This is a follow-up to 8843678 which removed the (time_t) typecast
from the macros so that conversion warnings could be identified.
Closes https://github.com/curl/curl/pull/5199
In a debug build, settting the environment variable "CURL_SMALLREQSEND"
will make the first HTTP request send not send more bytes than the set
amount, thus ending up verifying that the logic for handling a split
HTTP request send works correctly.
Restores the --head functionality to the curl utility which extracts
'protocol' that is stored that way.
Reported-by: James Fuller
Fixes#5196Closes#5198
In libcurl, CURLINFO_CONDITION_UNMET is used to avoid writing to the
output file if the server did not transfered a file based on time
condition. In the same manner, getting a 304 HTTP response back from the
server, for example after passing a custom If-Match-* header, also
fulfill this condition.
Fixes#5181Closes#5183
Currently, the TLS backend used by vquic/ngtcp2.c is selected at compile
time. Therefore OpenSSL support needs to be explicitly disabled.
Signed-off-by: Daiki Ueno <dueno@redhat.com>
Closes#5148
This updates the ngtcp2 OpenSSL backend to follow the API change in
commit 32e703164 of ngtcp2.
Notable changes are:
- ngtcp2_crypto_derive_and_install_{rx,tx}_key have been added to replace
ngtcp2_crypto_derive_and_install_key
- the 'side' argument of ngtcp2_crypto_derive_and_install_initial_key
has been removed
Fixes#5166Closes#5168
OpenSSL 3 deprecates SSL_CTX_load_verify_locations and the MD4, DES
functions we use.
Fix the MD4 and SSL_CTX_load_verify_locations warnings.
In configure, detect OpenSSL v3 and if so, inhibit the deprecation
warnings. OpenSSL v3 deprecates the DES functions we use for NTLM and
until we rewrite the code to use non-deprecated functions we better
ignore these warnings as they don't help us.
Closes#5139
Reported by the new script 'scripts/copyright.pl'. The script has a
regex whitelist for the files that don't need copyright headers.
Removed three (mostly usesless) README files from docs/
Closes#5141
.. because not all Windows build systems have those symbols, and even
those that do may be missing newer symbols (eg the Windows 7 SDK does
not define _WIN32_WINNT_WIN10).
Those symbols are used in build-time logic to decide which API to use
and prior to this change if the symbols were missing it would have
resulted in deprecated API being used when more recent functions were
available (eg GetVersionEx used instead of VerifyVersionInfo).
Reported-by: FuccDucc@users.noreply.github.com
Probably fixes https://github.com/curl/curl/issues/4995
Closes https://github.com/curl/curl/pull/5057
Prior to this change in libcurl debug builds http2 stream closure was
erroneously referred to as connection closure.
Before:
* nread <= 0, server closed connection, bailing
After:
* nread == 0, stream closed, bailing
Closes https://github.com/curl/curl/pull/5118
- Implement new option CURLSSLOPT_REVOKE_BEST_EFFORT and
--ssl-revoke-best-effort to allow a "best effort" revocation check.
A best effort revocation check ignores errors that the revocation check
was unable to take place. The reasoning is described in detail below and
discussed further in the PR.
---
When running e.g. with Fiddler, the schannel backend fails with an
unhelpful error message:
Unknown error (0x80092012) - The revocation function was unable
to check revocation for the certificate.
Sadly, many enterprise users who are stuck behind MITM proxies suffer
the very same problem.
This has been discussed in plenty of issues:
https://github.com/curl/curl/issues/3727,
https://github.com/curl/curl/issues/264, for example.
In the latter, a Microsoft Edge developer even made the case that the
common behavior is to ignore issues when a certificate has no recorded
distribution point for revocation lists, or when the server is offline.
This is also known as "best effort" strategy and addresses the Fiddler
issue.
Unfortunately, this strategy was not chosen as the default for schannel
(and is therefore a backend-specific behavior: OpenSSL seems to happily
ignore the offline servers and missing distribution points).
To maintain backward-compatibility, we therefore add a new flag
(`CURLSSLOPT_REVOKE_BEST_EFFORT`) and a new option
(`--ssl-revoke-best-effort`) to select the new behavior.
Due to the many related issues Git for Windows and GitHub Desktop, the
plan is to make this behavior the default in these software packages.
The test 2070 was added to verify this behavior, adapted from 310.
Based-on-work-by: georgeok <giorgos.n.oikonomou@gmail.com>
Co-authored-by: Markus Olsson <j.markus.olsson@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Closes https://github.com/curl/curl/pull/4981
- If an easy handle is owned by a multi different from the one specified
then return CURLM_BAD_EASY_HANDLE.
Prior to this change I assume user error could cause corruption.
Closes https://github.com/curl/curl/pull/5116
Makes curl_easy_getinfo() of "variable" numerical content instead return
the number set in the env variable `CURL_TIME`.
Makes curl_version() of "variable" textual content. This guarantees a
stable version string which can be tested against. Environment variable
`CURL_VERSION` defines the content.
Assisted-by: Mathias Gumz
This commit adds support to generate JSON via the writeout feature:
-w "%{json}"
It leverages the existing infrastructure as much as possible. Thus,
generating the JSON on STDERR is possible by:
-w "%{stderr}%{json}"
This implements a variant of
https://github.com/curl/curl/wiki/JSON#--write-out-json.
Closes#4870
When libcurl retries a connection due to it being "seemingly dead" or by
REFUSED_STREAM, it will now only do it up five times before giving up,
to avoid never-ending loops.
Reported-by: Dima Tisnek
Bug: https://curl.haxx.se/mail/lib-2020-03/0044.htmlCloses#5074
Make sure each separate index in connn->tempaddr[] is used for a fixed
family (and only that family) during the connection process.
If family one takes a long time and family two fails immediately, the
previous logic could misbehave and retry the same family two address
repeatedly.
Reported-by: Paul Vixie
Reported-by: Jay Satiro
Fixes#5083Fixes#4954Closes#5089
- Ignore CURLE_NOT_BUILT_IN errors returned by c-ares functions in
curl_easy_duphandle.
Prior to this change if c-ares was used as the resolver backend and
either it was too old or libcurl was built without IPv6 support then
some of our resolver functions could return CURLE_NOT_BUILT_IN to
curl_easy_duphandle causing it to fail.
Caused by c8f086b which shipped in 7.69.1.
Reported-by: Karl Chen
Fixes https://github.com/curl/curl/issues/5097
Closes https://github.com/curl/curl/pull/5100
1. The socks4 state machine was broken in the host resolving phase
2. The code now insists on IPv4-only when using SOCKS4 as the protocol
only supports that.
Regression from #4907 and 4a4b63d, shipped in 7.69.0
Reported-by: amishmm on github
Bug: https://github.com/curl/curl/issues/5053#issuecomment-596191594Closes#5061
New test 666 checks this is effective.
As upload buffer size is significant in this kind of tests, shorten it
in similar test 652.
Fixes#4860Closes#4833
Reported-by: RuurdBeerstra on github
Input buffer filling may delay the data sending if data reads are slow.
To overcome this problem, file and callback data reads do not accumulate
in buffer anymore. All other data (memory data and mime framing) are
considered as fast and still concatenated in buffer.
As this may highly impact performance in terms of data overhead, an early
end of part data check is added to spare a read call.
When encoding a part's data, an encoder may require more bytes than made
available by a single read. In this case, the above rule does not apply
and reads are performed until the encoder is able to deliver some data.
Tests 643, 644, 645, 650 and 654 have been adapted to the output data
changes, with test data size reduced to avoid the boredom of long lists of
1-byte chunks in verification data.
New test 667 checks mimepost using single-byte read callback with encoder.
New test 668 checks the end of part data early detection.
Fixes#4826
Reported-by: MrdUkk on github
In case a read callback returns a status (pause, abort, eof,
error) instead of a byte count, drain the bytes read so far but
remember this status for further processing.
Takes care of not losing data when pausing, and properly resume a
paused mime structure when requested.
New tests 670-673 check unpausing cases, with easy or multi
interface and mime or form api.
Fixes#4813
Reported-by: MrdUkk on github
With c-ares the dns parameters lives in ares_channel. Store them in the
curl handle and set them again in easy_duphandle.
Regression introduced in #3228 (6765e6d), shipped in curl 7.63.0.
Fixes#4893Closes#5020
Signed-off-by: Ernst Sjöstrand <ernst.sjostrand@verisure.com>
- Don't check errno on wakeup socket if sread returned 0 since sread
doesn't set errno in that case.
This is a follow-up to cf7760a from several days ago which fixed
Curl_multi_wait to stop busy looping sread on the non-blocking wakeup
socket if it was closed (ie sread returns 0). Due to a logic error it
was still possible to busy loop in that case if errno == EINTR.
Closes https://github.com/curl/curl/pull/5047
As we have logic that checks if we get a >= 400 reponse code back before
the upload is done, which then got confused since it wasn't "done" but
yet there was no data to send!
Reported-by: IvanoG on github
Fixes#4996Closes#5002
New test 666 checks this is effective.
As upload buffer size is significant in this kind of tests, shorten it
in similar test 652.
Fixes#4860
Reported-by: RuurdBeerstra on github
Input buffer filling may delay the data sending if data reads are slow.
To overcome this problem, file and callback data reads do not accumulate
in buffer anymore. All other data (memory data and mime framing) are
considered as fast and still concatenated in buffer.
As this may highly impact performance in terms of data overhead, an early
end of part data check is added to spare a read call.
When encoding a part's data, an encoder may require more bytes than made
available by a single read. In this case, the above rule does not apply
and reads are performed until the encoder is able to deliver some data.
Tests 643, 644, 645, 650 and 654 have been adapted to the output data
changes, with test data size reduced to avoid the boredom of long lists of
1-byte chunks in verification data.
New test 664 checks mimepost using single-byte read callback with encoder.
New test 665 checks the end of part data early detection.
Fixes#4826
Reported-by: MrdUkk on github
In case a read callback returns a status (pause, abort, eof,
error) instead of a byte count, drain the bytes read so far but
remember this status for further processing.
Takes care of not losing data when pausing, and properly resume a
paused mime structure when requested.
New tests 670-673 check unpausing cases, with easy or multi
interface and mime or form api.
Fixes#4813
Reported-by: MrdUkk on github
Closes#4833
... since the socket might not actually be readable anymore when for
example the data is already buffered in the TLS layer.
Fixes#4966
Reported-by: Anders Berg
Closes#5000
This reduces the HTTP/2 window size to 32 MB since libcurl might have to
buffer up to this amount of data in memory and yet we don't want it set
lower to potentially impact tranfer performance on high speed networks.
Requires nghttp2 commit b3f85e2daa629
(https://github.com/nghttp2/nghttp2/pull/1444) to work properly, to end
up in the next release after 1.40.0.
Fixes#4939Closes#4940
Previously, it was not possible to get a known hosts file entry due to
the lack of an API. ssh_session_get_known_hosts_entry(), introduced in
libssh-0.9.0, allows libcurl to obtain such information and behave the
same as when compiled with libssh2.
This also tries to avoid the usage of deprecated functions when the
replacements are available. The behaviour will not change if versions
older than libssh-0.8.0 are used.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Fixes#4953Closes#4962
When doing a request with a body + Expect: 100-continue and the server
responds with a 417, the same request will be retried immediately
without the Expect: header.
Added test 357 to verify.
Also added a control instruction to tell the sws test server to not read
the request body if Expect: is present, which the new test 357 uses.
Reported-by: bramus on github
Fixes#4949Closes#4964
Note: The RCPT TO command isn't required to advertise to the server that
it contains UTF-8 characters, instead the server is told that a mail may
contain UTF-8 in any envelope command via the MAIL command.
Support the SMTPUTF8 extension when sending mailbox information in the
MAIL command (FROM and AUTH parameters). Non-ASCII domain names will
be ACE encoded, if IDN is supported, whilst non-ASCII characters in
the local address part are passed to the server.
Reported-by: ygthien on github
Fixes#4828
* Don't include 'struct' in the gcrypt MD4_CTX typedef
* The call to gcry_md_read() should use a dereferenced ctx
* The call to gcry_md_close() should use a dereferenced ctx
Additional minor whitespace issue in the USE_WIN32_CRYPTO code.
Closes#4959
To simplify our code and since earlier versions lack important function
calls libcurl needs to function correctly.
nghttp2 1.12.0 was relased on June 26, 2016.
Closes#4961
TLS servers may request a certificate from the client. This request
includes a list of 0 or more acceptable issuer DNs. The client may use
this list to determine which certificate to send. GnuTLS's default
behavior is to not send a client certificate if there is no
match. However, OpenSSL's default behavior is to send the configured
certificate. The `GNUTLS_FORCE_CLIENT_CERT` flag mimics OpenSSL
behavior.
Authored-by: jethrogb on github
Fixes#1411Closes#4958
Whilst lib\md4.c used this pre-processor, lib\md5.c and
src\tool_metalink.c did not and simply relied on the WIN32
pre-processor directive.
Reviewed-by: Marcel Raad
Closes#4955
- Change tool_util.c tvnow() for Windows to match more closely to
timeval.c Curl_now().
- Create a win32 init function for the tool, since some initialization
is required for the tvnow() changes.
Prior to this change the monotonic time function used by curl in Windows
was determined at build-time and not runtime. That was a problem because
when curl was built targeted for compatibility with old versions of
Windows (eg _WIN32_WINNT < 0x0600) it would use GetTickCount which wraps
every 49.7 days that Windows has been running.
This change makes curl behave similar to libcurl's tvnow function, which
determines at runtime whether the OS is Vista+ and if so calls
QueryPerformanceCounter instead. (Note QueryPerformanceCounter is used
because it has higher resolution than the more obvious candidate
GetTickCount64). The changes to tvnow are basically a copy and paste but
the types in some cases are different.
Ref: https://github.com/curl/curl/issues/3309
Closes https://github.com/curl/curl/pull/4847
Saves the file as "[filename].[8 random hex digits].tmp" and renames
away the extension when done.
Co-authored-by: Jay Satiro
Reported-by: Mike Frysinger
Fixes#4914Closes#4926
- Deduplicate GetEnv() code.
- On Windows change ultimate call to use Windows API
GetEnvironmentVariable() instead of C runtime getenv().
Prior to this change both libcurl and the tool had their own GetEnv
which over time diverged. Now the tool's GetEnv is a wrapper around
curl_getenv (libcurl API function which is itself a wrapper around
libcurl's GetEnv).
Furthermore this change fixes a bug in that Windows API
GetEnvironmentVariable() is called instead of C runtime getenv() to get
the environment variable since some changes aren't always visible to the
latter.
Reported-by: Christoph M. Becker
Fixes https://github.com/curl/curl/issues/4774
Closes https://github.com/curl/curl/pull/4863
STRERROR_LEN is the constant used throughout the library to set the size
of the buffer on the stack that the curl strerror functions write to.
Prior to this change some extended length Windows error messages could
be truncated.
Closes https://github.com/curl/curl/pull/4920
- Do not say that conn->data is "cleared" by multi_done().
If the connection is in use then multi_done assigns another easy handle
still using the connection to conn->data, therefore in that case it is
not cleared.
Closes https://github.com/curl/curl/pull/4901
This avoids the duplication of strings when the optional AUTH and SIZE
parameters are required. It also assists with the modifications that
are part of #4892.
Closes#4903
The alt-svc cache survives a call to curl_easy_reset fine, but the file
name to use for saving the cache was cleared. Now the alt-svc cache has
a copy of the file name to survive handle resets.
Added test 1908 to verify.
Reported-by: Craig Andrews
Fixes#4898Closes#4902
RFC 7616 section 3.4 (The Authorization Header Field) states that "For
historical reasons, a sender MUST NOT generate the quoted string syntax
for the following parameters: algorithm, qop, and nc". This removes the
quoting for the algorithm parameter.
Reviewed-by: Steve Holme
Closes#4890
... as this is already done much earlier in the URL parser.
Also add test case 894 that verifies that pop3 with an encodedd CR in
the user name is rejected.
Closes#4887
- Fixed the flag parsing to apply to specific alternative entry only, as
per RFC. The earlier code would also get totally confused by
multiprotocol header, parsing flags from the wrong part of the header.
- Fixed the parser terminating on unknown protocols, instead of skipping
them.
- Fixed a busyloop when protocol-id was present without an equal sign.
Closes#4875
... since the current transfer is being killed. Setting to NULL is
wrong, leaving it pointing to 'data' is wrong since that handle might be
about to get freed.
Fixes#4845Closes#4858
Reported-by: dmitrmax on github
In the "scheme-less" parsing case, we need to strip off credentials
first before we guess scheme based on the host name!
Assisted-by: Jay Satiro
Fixes#4856Closes#4857
Previously it was stored in a global state which contributed to
curl_global_init's thread unsafety. This boolean is now instead figured
out in curl_multi_init() and stored in the multi handle. Less effective,
but thread safe.
Closes#4851
- Removed from global_init since it isn't thread-safe. The symbol will
still remain to not break compiles, it just won't have any effect going
forward.
- make the internals NOT loop on EINTR (the opposite from previously).
It only risks returning from the select/poll/wait functions early, and that
should be risk-free.
Closes#4840
Avoid "reparsing" the content and instead deliver more exactly what is
provided in the certificate and avoid truncating the data after 512
bytes as done previously. This no longer removes embedded newlines.
Fixes#4837
Reported-by: bnfp on github
Closes#4841
As detailed in DEPRECATE.md, the polarssl support is now removed after
having been disabled for 6 months and nobody has missed it.
The threadlock files used by mbedtls are renamed to an 'mbedtls' prefix
instead of the former 'polarssl' and the common functions that
previously were shared between mbedtls and polarssl and contained the
name 'polarssl' have now all been renamed to instead say 'mbedtls'.
Closes#4825
A regression made the code use 'multiplexed' as a boolean instead of the
counter it is intended to be. This made curl try to "over-populate"
connections with new streams.
This regression came with 41fcdf71a1, shipped in curl 7.65.0.
Also, respect the CURLMOPT_MAX_CONCURRENT_STREAMS value in the same
check.
Reported-by: Kunal Ekawde
Fixes#4779Closes#4784
- Allow forcing the host's key type found in the known_hosts file.
Currently, curl (with libssh2) does not take keys from your known_hosts
file into account when talking to a server. With this patch the
known_hosts file will be searched for an entry matching the hostname
and, if found, libssh2 will be told to claim this key type from the
server.
Closes https://github.com/curl/curl/pull/4747
- Support hostname verification via alternative names (SAN) in the
peer certificate when CURLOPT_CAINFO is used in Windows 7 and earlier.
CERT_NAME_SEARCH_ALL_NAMES_FLAG doesn't exist before Windows 8. As a
result CertGetNameString doesn't quite work on those versions of
Windows. This change provides an alternative solution for
CertGetNameString by iterating through CERT_ALT_NAME_INFO for earlier
versions of Windows.
Prior to this change many certificates failed the hostname validation
when CURLOPT_CAINFO was used in Windows 7 and earlier. Most certificates
now represent multiple hostnames and rely on the alternative names field
exclusively to represent their hostnames.
Reported-by: Jeroen Ooms
Fixes https://github.com/curl/curl/issues/3711
Closes https://github.com/curl/curl/pull/4761
- Add new error code CURLE_QUIC_CONNECT_ERROR for QUIC connection
errors.
Prior to this change CURLE_FAILED_INIT was used, but that was not
correct.
Closes https://github.com/curl/curl/pull/4754
- Define USE_WIN32_CRYPTO by default. This enables SMB.
- Show whether SMB is enabled in the "Enabled features" output.
- Fix mingw compiler warning for call to CryptHashData by casting away
const param. mingw CryptHashData prototype is wrong.
Closes https://github.com/curl/curl/pull/4717
The code was duplicated in the various resolver backends.
Also, it was called after the call to `Curl_ipvalid`, which matters in
case of `CURLRES_IPV4` when called from `connect.c:bindlocal`. This
caused test 1048 to fail on classic MinGW.
The code ignores `conn->ip_version` as done previously in the
individual resolver backends.
Move the call to the `resolver_start` callback up to appease test 655,
which wants it to be called also for literal addresses.
Closes https://github.com/curl/curl/pull/4798
Factor out common I/O loop as bearssl_run_until, which reads/writes TLS
records until the desired engine state is reached. This is now used for
the handshake, read, write, and close.
Match OpenSSL SSL_write behavior, and don't return the number of bytes
written until the corresponding records have been completely flushed
across the socket. This involves keeping track of the length of data
buffered into the TLS engine, and assumes that when CURLE_AGAIN is
returned, the write function will be called again with the same data
and length arguments. This is the same requirement of SSL_write.
Handle TLS close notify as EOF when reading by returning 0.
Closes https://github.com/curl/curl/pull/4748
- Undefine DEBUGASSERT in curl_setup_once.h in case it was already
defined as a system macro.
- Don't compile write32_le in curl_endian unless
CURL_SIZEOF_CURL_OFF_T > 4, since it's only used by Curl_write64_le.
- Include <arpa/inet.h> in socketpair.c.
Closes https://github.com/curl/curl/pull/4756
- Remove our cb_update_key in favor of ngtcp2's new
ngtcp2_crypto_update_key_cb which does the same thing.
Several days ago the ngtcp2_update_key callback function prototype was
changed in ngtcp2/ngtcp2@42ce09c. Though it would be possible to
fix up our cb_update_key for that change they also added
ngtcp2_crypto_update_key_cb which does the same thing so we'll use that
instead.
Ref: https://github.com/ngtcp2/ngtcp2/commit/42ce09c
Closes https://github.com/curl/curl/pull/4735
... as it would previously prefer new connections rather than
multiplexing in most conditions! The (now removed) code was a leftover
from the Pipelining code that was translated wrongly into a
multiplex-only world.
Reported-by: Kunal Ekawde
Bug: https://curl.haxx.se/mail/lib-2019-12/0060.htmlCloses#4732
- Remove the final semi-colon in the SEC2TXT() macro definition.
Before: #define SEC2TXT(sec) case sec: txt = #sec; break;
After: #define SEC2TXT(sec) case sec: txt = #sec; break
Prior to this change SEC2TXT(foo); would generate break;; which caused
the empty expression warning.
Ref: https://github.com/curl/curl/commit/5b22e1a#r36458547
This makes them never to be considered "the oldest" to be discarded when
reaching the connection cache limit. The reasoning here is that
CONNECT_ONLY is primarily used in combination with using the
connection's socket post connect and since that is used outside of
curl's knowledge we must assume that it is in use until explicitly
closed.
Reported-by: Pavel Pavlov
Reported-by: Pavel Löbl
Fixes#4426Fixes#4369Closes#4696
It could accidentally let the connection get used by more than one
thread, leading to double-free and more.
Reported-by: Christopher Reid
Fixes#4544Closes#4557
Add support for CURLSSLOPT_NO_PARTIALCHAIN in CURLOPT_PROXY_SSL_OPTIONS
and OS400 package spec.
Also I added the option to the NameValue list in the tool even though it
isn't exposed as a command-line option (...yet?). (NameValue stringizes
the option name for the curl cmd -> libcurl source generator)
Follow-up to 564d88a which added CURLSSLOPT_NO_PARTIALCHAIN.
Ref: https://github.com/curl/curl/pull/4655
- Stop treating lack of HTTP2 as an unknown option error result for
CURLOPT_SSL_ENABLE_ALPN and CURLOPT_SSL_ENABLE_NPN.
Prior to this change it was impossible to disable ALPN / NPN if libcurl
was built without HTTP2. Setting either option would result in
CURLE_UNKNOWN_OPTION and the respective internal option would not be
set. That was incorrect since ALPN and NPN are used independent of
HTTP2.
Reported-by: Shailesh Kapse
Fixes https://github.com/curl/curl/issues/4668
Closes https://github.com/curl/curl/pull/4672
