The comment was confusing and suggested that setting CURLOPT_NOPROGRESS
to 0L would both enable and disable debug output at the same time, like
a Schrödinger's cat of CURLOPTs.
Closes#4745
This commit adds curl_multi_wakeup() which was previously in the TODO
list under the curl_multi_unblock name.
On some platforms and with some configurations this feature might not be
available or can fail, in these cases a new error code
(CURLM_WAKEUP_FAILURE) is returned from curl_multi_wakeup().
Fixes#4418Closes#4608
Starting with this change when doing parallel transfers, without this
option set, curl will prefer to create new transfers multiplexed on an
existing connection rather than creating a brand new one.
--parallel-immediate can be set to tell curl to prefer to use new
connections rather than to wait and try to multiplex.
libcurl-wise, this means that curl will set CURLOPT_PIPEWAIT by default
on parallel transfers.
Suggested-by: Tom van der Woerdt
Closes#4500
The disable-scan script used in test 1165 is extended to also verify
that the docs cover all used defines and all defines offered by
configure.
Reported-by: SLDiggie on github
Fixes#4545Closes#4587
With the `isdigit` implementation that comes with MSYS2, the argument
is used as an array subscript, resulting in a -Wchar-subscripts
warning. `isdigit`'s behavior is undefined if the argument is negative
and not EOF [0]. As done in lib/curl_ctype.h, cast the `char` variable
to `unsigned char` to avoid that.
[0] https://en.cppreference.com/w/c/string/byte/isdigit
Closes https://github.com/curl/curl/pull/4503
Prior to this change some users did not understand that the "request"
starts when the handle is added to the multi handle, or probably they
did not understand that some of those transfers may be queued and that
time is included in timeout.
Reported-by: Jeroen Ooms
Fixes https://github.com/curl/curl/issues/4486
Closes https://github.com/curl/curl/pull/4489
New option that allows a user to ONLY switch off curl's progress meter
and leave everything else in "talkative" mode.
Reported-by: Piotr Komborski
Fixes#4422Closes#4470
... just say that limiting operations risk aborting otherwise fine
working transfers. If that means seconds, minutes or hours, we leave to
the user.
Reported-by: Martin Gartner
Closes#4469
CURLU_NO_AUTHORITY is intended for use with unknown schemes (i.e. not
"file:///") to override cURL's default demand that an authority exists.
Closes#4349
Double-underscored or underscore plus uppercase letter at least.
... as they're claimed to be reserved.
Reported-by: patnyb on github
Fixes#4254Closes#4255
For a long time (since 7.28.1) we've returned error when setting the
value to 1 to make applications notice that we stopped supported the old
behavior for 1. Starting now, we treat 1 and 2 exactly the same.
Closes#4241
RFC 7838 section 5:
When using an alternative service, clients SHOULD include an Alt-Used
header field in all requests.
Removed CURLALTSVC_ALTUSED again (feature is still EXPERIMENTAL thus
this is deemed ok).
You can disable sending this header just like you disable any other HTTP
header in libcurl.
Closes#4199
Even though it cannot fall-back to a lower HTTP version automatically. The
safer way to upgrade remains via CURLOPT_ALTSVC.
CURLOPT_H3 no longer has any bits that do anything and might be removed
before we remove the experimental label.
Updated the curl tool accordingly to use "--http3".
Closes#4197
This is only the libcurl part that provides the information. There's no
user of the parsed value. This change includes three new tests for the
parser.
Ref: #3794
Added the ability for the calling program to specify the authorisation
identity (authzid), the identity to act as, in addition to the
authentication identity (authcid) and password when using SASL PLAIN
authentication.
Fixes#3653Closes#3790
NOTE: This commit was cherry-picked and is part of a series of commits
that added the authzid feature for upcoming 7.66.0. The series was
temporarily reverted in db8ec1f so that it would not ship in a 7.65.x
patch release.
Closes https://github.com/curl/curl/pull/4186
Repeatedly we see problems where using curl_multi_wait() is difficult or
just awkward because if it has no file descriptor to wait for
internally, it returns immediately and leaves it to the caller to wait
for a small amount of time in order to avoid occasional busy-looping.
This is often missed or misunderstood, leading to underperforming
applications.
This change introduces curl_multi_poll() as a replacement drop-in
function that accepts the exact same set of arguments. This function
works identically to curl_multi_wait() - EXCEPT - for the case when
there's nothing to wait for internally, as then this function will by
itself wait for a "suitable" short time before it returns. This
effectiely avoids all risks of busy-looping and should also make it less
likely that apps "over-wait".
This also changes the curl tool to use this funtion internally when
doing parallel transfers and changes curl_easy_perform() to use it
internally.
Closes#4163
As the plan has been laid out in DEPRECATED. Update docs accordingly and
verify in test 1174. Now requires the option to be set to allow HTTP/0.9
responses.
Closes#4191
If using the read callback for HTTP_POST, and POSTFIELDSIZE is not set,
automatically add a Transfer-Encoding: chunked header, same as it is
already done for HTTP_PUT, HTTP_POST_FORM and HTTP_POST_MIME. Update
test 1514 according to the new behaviour.
Closes#4138
USe configure --with-ngtcp2 or --with-quiche
Using either option will enable a HTTP3 build.
Co-authored-by: Alessandro Ghedini <alessandro@ghedini.me>
Closes#3500
This is done by making sure each individual transfer is first added to a
linked list as then they can be performed serially, or at will, in
parallel.
Closes#3804
Since 7.54 --tlsv1. options use the specified version or later, however
older versions of curl documented it as using just the specified version
which may or may not have happened depending on the TLS library.
Document this discrepancy to allay confusion for users familiar with the
old documentation that expect just the specified version.
Fixes https://github.com/curl/curl/issues/4097
Closes https://github.com/curl/curl/pull/4119
- Escape apostrophes at line start.
Some lines begin with a "'" (apostrophe, single quote), which is then
interpreted as a control character in *roff.
Such lines are interpreted as being a call to a macro, and if
undefined, the lines are removed from the output.
Bug: https://bugs.debian.org/926352
Signed-off-by: Bjarni Ingi Gislason <bjarniig@rhi.hi.is>
Submitted-by: Alessandro Ghedini
Closes https://github.com/curl/curl/pull/4111
The backslash in the character Line Feed must be escaped.
The current man-page outputs the code as following:
fprintf(stderr, "curl_multi failed, code %d.0, mc);
The commit fixes it as follow:
fprintf(stderr, "curl_multi failed, code %d\n", mc);
Closes#4079
Commit 25fd1057c9 made HTTP2 the default, and further down in the
man page that new default is mentioned, but the section at the top
contradicted it until now.
Also remove claim that setting the HTTP version is not sensible.
Closes#4075
Clarify the functionality when built to use Schannel and Secure
Transport and stop calling it the "recommended" or "preferred" way and
instead rather call it the default.
Removed the reference to the ssl comparison table as it isn't necessary.
Reported-by: Richard Alcock
Bug: https://curl.haxx.se/mail/lib-2019-06/0019.htmlCloses#4005
Remove support for, references to and use of "cyaSSL" from the source
and docs. wolfSSL is the current name and there's no point in keeping
references to ancient history.
Assisted-by: Daniel Gustafsson
Closes#3903
As want is size_t, (file->buffer_pos - want) is unsigned, so checking
if it's less than zero makes no sense.
Check if file->buffer_pos is less than want instead to avoid the
unsigned integer wraparound.
Closes https://github.com/curl/curl/pull/3975
- Revert all commits related to the SASL authzid feature since the next
release will be a patch release, 7.65.1.
Prior to this change CURLOPT_SASL_AUTHZID / --sasl-authzid was destined
for the next release, assuming it would be a feature release 7.66.0.
However instead the next release will be a patch release, 7.65.1 and
will not contain any new features.
After the patch release after the reverted commits can be restored by
using cherry-pick:
git cherry-pick a14d72ca9499ff8c1cc36c2a8d520edf690
Details for all reverted commits:
Revert "os400: take care of CURLOPT_SASL_AUTHZID in curl_easy_setopt_ccsid()."
This reverts commit 0edf6907ae.
Revert "tests: Fix the line endings for the SASL alt-auth tests"
This reverts commit c2a8d52a13.
Revert "examples: Added SASL PLAIN authorisation identity (authzid) examples"
This reverts commit 8c1cc369d0.
Revert "curl: --sasl-authzid added to support CURLOPT_SASL_AUTHZID from the tool"
This reverts commit a9499ff136.
Revert "sasl: Implement SASL authorisation identity via CURLOPT_SASL_AUTHZID"
This reverts commit a14d72ca2f.
Added the ability for the calling program to specify the authorisation
identity (authzid), the identity to act as, in addition to the
authentication identity (authcid) and password when using SASL PLAIN
authentication.
Fixed#3653Closes#3790
They serve very little purpose and mostly just add noise. Most of them
have been around for a very long time. I read them all before removing
or rephrasing them.
Ref: #3876Closes#3883
Due to limitations in Curl_resolver_wait_resolv(), it doesn't work for
DOH resolves. This fix disables DOH for those.
Limitation added to KNOWN_BUGS.
Fixes#3850Closes#3857
The time field in the curl_fileinfo struct will always be zero. No code
was ever implemented to actually convert the date string to a time_t.
Fixes#3829Closes#3835
... to make the host name "usable". Store the scope id and put it back
when extracting a URL out of it.
Also makes curl_url_set() syntax check CURLUPART_HOST.
Fixes#3817Closes#3822
Kerberos was incorrectly indented as a subsection under FTP, which is
incorrect as they are both top level sections. A fix for this was first
attempted in commit fef38a0898 but that
was a few paddles short of being complete.
Add the subsections under "Structs in libcurl" to the table of contents.
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Make all struct members under the Curl_handler section
print in monospace font.
Closes#3801
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Introducing the curl bug bounty program on hackerone. We now recommend
filing security issues directly in the hackerone ticket system which
only is readable to curl security team members.
Assisted-by: Daniel Gustafsson
Closes#3488
Commit 9081014 fixed most of the confusing issues between scope id and
scope however 844896d added bad limits checking assuming that the scope
is being set and not the scope id.
I have fixed the documentation so it all refers to scope ids.
In addition Curl_if2ip refered to the scope id as remote_scope_id which
is incorrect, so I renamed it to local_scope_id.
Adjusted-by: Daniel Stenberg
Closes#3655Closes#3765Fixes#3713
Only allow well formed decimal numbers in the input.
Document that the number MUST be between 1 and 65535.
Add tests to test 1560 to verify the above.
Ref: https://github.com/curl/curl/issues/3753Closes#3762
Remove the code too. The functionality has been disabled in code since
7.62.0. Setting this option will from now on simply be ignored and have
no function.
Closes#3654
.. and for Windows also call WSACleanup since we call WSAStartup.
The example is to demonstrate handling the socket independently of
libcurl. In this case libcurl is not responsible for creating, opening
or closing the socket, it is handled by the application (our example).
Fixes https://github.com/curl/curl/pull/3663
The main change here is the timer value that was wrong, it was given in
usecs (ms * 1000), while the itimerspec struct wants nsecs (ms * 1000 *
1000). This resulted in the callback being invoked WAY TOO OFTEN.
As a quick check you can run this command before and after applying this
commit:
# shell 1
./ephiperfifo 2>&1 | tee ephiperfifo.log
# shell 2
echo http://hacking.elboulangero.com > hiper.fifo
Then just compare the size of the logs files.
Closes#3633Fixes#3632
Signed-off-by: Arnaud Rebillout <arnaud.rebillout@collabora.com>
Add support for Ephemeral elliptic curve Diffie-Hellman key exchange
algorithm option when selecting ciphers. This became available on the
Win10 SDK.
Closes https://github.com/curl/curl/pull/3608
From within the timer callbacks. Recursive is problematic for several
reasons. They should still work, but this way the examples and the
documentation becomes simpler. I don't think we need to encourage
recursive calls.
Discussed in #3537Closes#3601
... and remove it from the dist tarball. It has served its time, it
barely gets updated anymore and "everything curl" is now convering all
this document once tried to include, and does it more and better.
In the compressed scenario, this removes ~15K data from the binary,
which is 25% of the -M output.
It remains in the git repo for now for as long as the web site builds a
page using that as source. It renders poorly on the site (especially for
mobile users) so its not even good there.
Closes#3587
The draft-ietf-httpbis-rfc6265bis-02 draft, specify a set of prefixes
and how they should affect cookie initialization, which has been
adopted by the major browsers. This adds support for the two prefixes
defined, __Host- and __Secure, and updates the testcase with the
supplied examples from the draft.
Closes#3554
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
- Pass an empty string to CURLOPT_ACCEPT_ENCODING to use the default
supported encodings.
Prior to this change the specific encodings of gzip and deflate were set
but there's no guarantee they'd be supported by the user's libcurl.
The Kerberos subsection was mistakenly a subsubsection under FTP, and
the curlx subsection was missing an anchor for the TOC link.
Closes#3529
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
