This option sets the (octal) mode to use for the remote file when one is
created, using the SFTP, SCP or FILE protocols. When not set, the
default is 0644.
Closes#6244
Fix regression from commit fc813f80e1 (#6248) that changed the unit
to microseconds instead of seconds with fractions
Reported-by: 不确定
Fixes#6321Closes#6322
The command line tool also independently sets --ftp-skip-pasv-ip by
default.
Ten test cases updated to adapt the modified --libcurl output.
Bug: https://curl.se/docs/CVE-2020-8284.html
CVE-2020-8284
Reported-by: Varnavas Papaioannou
Commit 3b80d3ca46 (June 2017) introduced getinfo replacement
variables that use curl_off_t instead of doubles. Switch the --write-out
function over to use them.
Closes#6248
- enable in the build (configure)
- header parsing
- host name lookup
- unit tests for the above
- CI build
- CURL_VERSION_HSTS bit
- curl_version_info support
- curl -V output
- curl-config --features
- CURLOPT_HSTS_CTRL
- man page for CURLOPT_HSTS_CTRL
- curl --hsts (sets CURLOPT_HSTS_CTRL and works with --libcurl)
- man page for --hsts
- save cache to disk
- load cache from disk
- CURLOPT_HSTS
- man page for CURLOPT_HSTS
- added docs/HSTS.md
- fixed --version docs
- adjusted curl_easy_duphandle
Closes#5896
This was inadvertently dropped from the code when the parallel support
was added.
Regression since b88940850 (7.66.0)
Reviewed-by: Jay Satiro
Closes#6155
by linking `lib/dynbuf.c` when building a static curl binary.
Previously this source file was only included when building
a dynamic curl binary. This was likely possibly because no
functions from the `src/Makefile.inc` / `CURLX_CFILES` sources
were actually required for a curl tool build. This has
recently changed with the introduction of `curlx_dyn_*()`
memory functions and their use by the tool sources.
Closes#6060
Previously, it would pass on a define (int) which could make libcurl
read junk as a value - which prevented the CURLOPT_IPRESOLVE option to
"take". This could then make test 2100 do two DoH requests instead of
one!
Fixes#6042Closes#6043
Whitespace is spelled without a space between white and space, so
make sure to consistently spell it that way across the codebase.
Closes#6023
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Reviewed-by: Emil Engler <me@emilengler.com>
... since it is converted and the original pointer is freed on Windows
unicode handling.
Follow-up to aa8777f63fFixes#5977Closes#5978
Reported-by: xwxbug on github
When the code was changed to do fputs() instead of fprintf() it got
sensitive for NULL pointers; add checks for that.
Follow-up from 0c1e767e83Closes#5963
The previous sleep for retries would block all other concurrent
transfers. Starting now, the retry will instead be properly marked to
not get restarted until after the delay time but other transfers can
still continue in the mean time.
Closes#5917
They're not thread-safe so they should not be used in libcurl code.
Explictly enabled when deemed necessary and in examples and tests
Reviewed-by: Nicolas Sterchele
Closes#5732
Previously a file that isn't user-readable but is user-writable would
not be properly avoided and would get overwritten.
Reported-by: BrumBrum on hackerone
Assisted-by: Jay Satiro
Bug: https://hackerone.com/reports/926638Closes#5731
timeval::tv_usec might be a 32-bit integer and timespec::tv_nsec might
be a 64-bit integer. This is the case when building for recent macOS
versions, for example. Just treat tv_usec as an int, which should
hopefully always be sufficient on systems with
`HAVE_CLOCK_GETTIME_MONOTONIC`.
Closes https://github.com/curl/curl/pull/5695
It confuses code analyzers with its use of -1 for unsigned value. Also,
a check that's not normally used in strdup() code - and not necessary.
Closes#5697
... to use the maximum value for 'size_t' when detecting integer overflow.
Changed the limit to max/4 as already that seems unreasonably large.
Codacy didn't like the previous approach.
Closes#5683
include zstd curl patch for Makefile.m32 from vszakats
and include Add CMake support for zstd from Peter Wu
Helped-by: Viktor Szakats
Helped-by: Peter Wu
Closes#5453
Updated terminology in docs, comments and phrases to refer to C strings
as "null-terminated". Done to unify with how most other C oriented docs
refer of them and what users in general seem to prefer (based on a
single highly unscientific poll on twitter).
Reported-by: coinhubs on github
Fixes#5598Closes#5608
Background:
148534d added CURLSSLOPT_NATIVE_CA to use the Windows OS certificate
store in libcurl w/ OpenSSL on Windows. CURLSSLOPT_NATIVE_CA overrides
CURLOPT_CAINFO if both are set. The curl tool will fall back to
CURLSSLOPT_NATIVE_CA if it could not find a certificate bundle to set
via CURLOPT_CAINFO.
Problem:
libcurl may be built with hardcoded paths to a certificate bundle or
directory, and if CURLSSLOPT_NATIVE_CA is used then those paths are
ignored.
Solution:
A solution is still being discussed but since there's an impending
release this commit removes using CURLSSLOPT_NATIVE_CA in the curl tool.
Ref: https://github.com/curl/curl/issues/5585
... and not as a "glob". Now done by passing the supposed host to the
URL parser which supposedly will do a better job at identifying "real"
numerical IPv6 addresses.
Reported-by: puckipedia on github
Fixes#5576Closes#5579
Prior to this change in Windows Unicode builds most parsed options would
not be freed.
Found using _CrtDumpMemoryLeaks().
Ref: https://github.com/curl/curl/issues/5545
curl would previously show "curl: Saved to filename 'name from header'"
if -J was used and a name was picked from the Content-Disposition
header. That output could interfer with other stdout output, such as -w.
This commit removes that output line.
Bug: https://curl.haxx.se/mail/archive-2020-05/0044.html
Reported-by: Коваленко Анатолий Викторович
Closes#5435
This change introduces a generic way to provide binary data in setopt
options, called BLOBs.
This change introduces these new setopts:
CURLOPT_ISSUERCERT_BLOB, CURLOPT_PROXY_SSLCERT_BLOB,
CURLOPT_PROXY_SSLKEY_BLOB, CURLOPT_SSLCERT_BLOB and CURLOPT_SSLKEY_BLOB.
Reviewed-by: Daniel Stenberg
Closes#5357
- Stick to a single unified way to use structs
- Make checksrc complain on 'typedef struct {'
- Allow them in tests, public headers and examples
- Let MD4_CTX, MD5_CTX, and SHA256_CTX typedefs remain as they actually
typedef different types/structs depending on build conditions.
Closes#5338
- use `wmain` instead of `main` when `_UNICODE` is defined [0]
- define `argv_item_t` as `wchar_t *` in this case
- use the curl_multibyte gear to convert the command-line arguments to
UTF-8
This makes it possible to pass parameters with characters outside of
the current locale on Windows, which is required for some tests, e.g.
the IDN tests. Out of the box, this currently only works with the
Visual Studio project files, which default to Unicode, and winbuild
with the `ENABLE_UNICODE` option.
[0] https://devblogs.microsoft.com/oldnewthing/?p=40643
Ref: https://github.com/curl/curl/issues/3747
Closes https://github.com/curl/curl/pull/3784
To avoid collision risks with private libcurl symbols when linked with
static versions (or just versions not hiding internal symbols).
Reported-by: hydra3333 on github
Fixes#5219Closes#5234
This change inverse the order of processing for the --etag-compare and
--etag-save option to process first --etag-compare. This in turn allows
to use the same file name to compare and save an etag.
The original behavior of not failing if the etag file does not exists is
conserved.
Fixes#5179Closes#5180
Load long values correctly (e.g. for http_code).
Use curl_off_t (not long) for:
- size_download (CURLINFO_SIZE_DOWNLOAD_T)
- size_upload (CURLINFO_SIZE_UPLOAD_T)
The unit for these values is bytes/second, not microseconds:
- speed_download (CURLINFO_SPEED_DOWNLOAD_T)
- speed_upload (CURLINFO_SPEED_UPLOAD_T)
Fixes#5131Closes#5152
Previously it rendered the page from files matching "*.d" in the correct
directory, which worked fine in git builds when the files were added but
made it easy to forget adding the files to the dist.
Now, only man page sections listed in DPAGES in Makefile.inc will be
used, thus "forcing" us to update this to get the man page right and get
it included in the dist at the same time.
Ref: #5146Closes#5149
Reported by the new script 'scripts/copyright.pl'. The script has a
regex whitelist for the files that don't need copyright headers.
Removed three (mostly usesless) README files from docs/
Closes#5141
Ensures that -K/--config inserts new items at the end of the list
instead of overwriting the second item, and that after a -K/--config
option has been parsed, the option parser's view of the current config
is update.
Fixes#5120Closes#5123
