Add the new option CURLOPT_KEEP_SENDING_ON_ERROR to control whether
sending the request body shall be completed when the server responds
early with an error status code.
This is suitable for manual NTLM authentication.
Reviewed-by: Jay Satiro
Closes https://github.com/curl/curl/pull/904
Speed limits (from CURLOPT_MAX_RECV_SPEED_LARGE &
CURLOPT_MAX_SEND_SPEED_LARGE) were applied simply by comparing limits
with the cumulative average speed of the entire transfer; While this
might work at times with good/constant connections, in other cases it
can result to the limits simply being "ignored" for more than "short
bursts" (as told in man page).
Consider a download that goes on much slower than the limit for some
time (because bandwidth is used elsewhere, server is slow, whatever the
reason), then once things get better, curl would simply ignore the limit
up until the average speed (since the beginning of the transfer) reached
the limit. This could prove the limit useless to effectively avoid
using the entire bandwidth (at least for quite some time).
So instead, we now use a "moving starting point" as reference, and every
time at least as much as the limit as been transferred, we can reset
this starting point to the current position. This gets a good limiting
effect that applies to the "current speed" with instant reactivity (in
case of sudden speed burst).
Closes#971
With HTTP/2 each transfer is made in an indivial logical stream over the
connection, making most previous errors that caused the connection to get
forced-closed now instead just kill the stream and not the connection.
Fixes#941
- Disable ALPN on Wine.
- Don't pass input secbuffer when ALPN is disabled.
When ALPN support was added a change was made to pass an input secbuffer
to initialize the context. When ALPN is enabled the buffer contains the
ALPN information, and when it's disabled the buffer is empty. In either
case this input buffer caused problems with Wine and connections would
not complete.
Bug: https://github.com/curl/curl/issues/983
Reported-by: Christian Fillion
Sessionid cache management is inseparable from managing individual
session lifetimes. E.g. for reference-counted sessions (like those in
SChannel and OpenSSL engines) every session addition and removal
should be accompanied with refcount increment and decrement
respectively. Failing to do so synchronously leads to a race condition
that causes symptoms like use-after-free and memory corruption.
This commit:
- makes existing session cache locking explicit, thus allowing
individual engines to manage lock's scope.
- fixes OpenSSL and SChannel engines by putting refcount management
inside this lock's scope in relevant places.
- adds these explicit locking calls to other engines that use
sessionid cache to accommodate for this change. Note, however,
that it is unknown whether any of these engines could also have
this race.
Bug: https://github.com/curl/curl/issues/815Fixes#815Closes#847
Only protocols that actually have a protocol registered for ALPN and NPN
should try to get that negotiated in the TLS handshake. That is only
HTTPS (well, http/1.1 and http/2) right now. Previously ALPN and NPN
would wrongly be used in all handshakes if libcurl was built with it
enabled.
Reported-by: Jay Satiro
Fixes#789
WinSock destroys recv() buffer if send() is failed. As result - server
response may be lost if server sent it while curl is still sending
request. This behavior noticeable on HTTP server short replies if
libcurl use several send() for request (usually for POST request).
To workaround this problem, libcurl use recv() before every send() and
keeps received data in intermediate buffer for further processing.
Fixes: #657Closes: #668
As these two options provide identical functionality, the former for
SOCK5 proxies and the latter for HTTP proxies, merged the two options
together.
As such CURLOPT_SOCKS5_GSSAPI_SERVICE is marked as deprecated as of
7.49.0.
Some TFTP server implementations ignore the "TFTP Option extension"
(RFC 1782-1784, 2347-2349), or implement it in a flawed way, causing
problems with libcurl. Another switch for curl_easy_setopt
"CURLOPT_TFTP_NO_OPTIONS" is introduced which prevents libcurl from
sending TFTP option requests to a server, avoiding many problems caused
by faulty implementations.
Bug: https://github.com/curl/curl/issues/481
Since we didn't keep the input argument around after having called
mbedtls, it could end up accessing the wrong memory when figuring out
the ALPN protocols.
Closes#642
... and assign it from the set.fread_func_set pointer in the
Curl_init_CONNECT function. This A) avoids that we have code that
assigns fields in the 'set' struct (which we always knew was bad) and
more importantly B) it makes it impossibly to accidentally leave the
wrong value for when the handle is re-used etc.
Introducing a state-init functionality in multi.c, so that we can set a
specific function to get called when we enter a state. The
Curl_init_CONNECT is thus called when switching to the CONNECT state.
Bug: https://github.com/bagder/curl/issues/346Closes#346
- Add new option CURLOPT_DEFAULT_PROTOCOL to allow specifying a default
protocol for schemeless URLs.
- Add new tool option --proto-default to expose
CURLOPT_DEFAULT_PROTOCOL.
In the case of schemeless URLs libcurl will behave in this way:
When the option is used libcurl will use the supplied default.
When the option is not used, libcurl will follow its usual plan of
guessing from the hostname and falling back to 'http'.
Currently, libcurl rejects responses with "Content-Encoding: compress"
when CURLOPT_ACCEPT_ENCODING is set to "". I think that libcurl should
treat the Content-Encoding "compress" the same as other
Content-Encodings that it does not support, e.g. "bzip2". That means
just ignoring it.
New tool option --ssl-no-revoke.
New value CURLSSLOPT_NO_REVOKE for CURLOPT_SSL_OPTIONS.
Currently this option applies only to WinSSL where we have automatic
certificate revocation checking by default. According to the
ssl-compared chart there are other backends that have automatic checking
(NSS, wolfSSL and DarwinSSL) so we could possibly accommodate them at
some later point.
Bug: https://github.com/bagder/curl/issues/264
Reported-by: zenden2k <zenden2k@gmail.com>
This commit is several drafts squashed together. The changes from each
draft are noted below. If any changes are similar and possibly
contradictory the change in the latest draft takes precedence.
Bug: https://github.com/bagder/curl/issues/244
Reported-by: Chris Araman
%%
%% Draft 1
%%
- return 0 if len == 0. that will have to be documented.
- continue on and process the caches regardless of raw recv
- if decrypted data will be returned then set the error code to CURLE_OK
and return its count
- if decrypted data will not be returned and the connection has closed
(eg nread == 0) then return 0 and CURLE_OK
- if decrypted data will not be returned and the connection *hasn't*
closed then set the error code to CURLE_AGAIN --only if an error code
isn't already set-- and return -1
- narrow the Win2k workaround to only Win2k
%%
%% Draft 2
%%
- Trying out a change in flow to handle corner cases.
%%
%% Draft 3
%%
- Back out the lazier decryption change made in draft2.
%%
%% Draft 4
%%
- Some formatting and branching changes
- Decrypt all encrypted cached data when len == 0
- Save connection closed state
- Change special Win2k check to use connection closed state
%%
%% Draft 5
%%
- Default to CURLE_AGAIN in cleanup if an error code wasn't set and the
connection isn't closed.
%%
%% Draft 6
%%
- Save the last error only if it is an unrecoverable error.
Prior to this I saved the last error state in all cases; unfortunately
the logic to cover that in all cases would lead to some muddle and I'm
concerned that could then lead to a bug in the future so I've replaced
it by only recording an unrecoverable error and that state will persist.
- Do not recurse on renegotiation.
Instead we'll continue on to process any trailing encrypted data
received during the renegotiation only.
- Move the err checks in cleanup after the check for decrypted data.
In either case decrypted data is always returned but I think it's easier
to understand when those err checks come after the decrypted data check.
%%
%% Draft 7
%%
- Regardless of len value go directly to cleanup if there is an
unrecoverable error or a close_notify was already received. Prior to
this change we only acknowledged those two states if len != 0.
- Fix a bug in connection closed behavior: Set the error state in the
cleanup, because we don't know for sure it's an error until that time.
- (Related to above) In the case the connection is closed go "greedy"
with the decryption to make sure all remaining encrypted data has been
decrypted even if it is not needed at that time by the caller. This is
necessary because we can only tell if the connection closed gracefully
(close_notify) once all encrypted data has been decrypted.
- Do not renegotiate when an unrecoverable error is pending.
%%
%% Draft 8
%%
- Don't show 'server closed the connection' info message twice.
- Show an info message if server closed abruptly (missing close_notify).
With many easy handles using the same connection for multiplexing, it is
important we store and keep the transfer-oriented stuff in the
SessionHandle so that callbacks and callback data work fine even when
many easy handles share the same physical connection.
SSLeay was the name of the library that was subsequently turned into
OpenSSL many moons ago (1999). curl does not work with the old SSLeay
library since years. This is now reflected by only using USE_OPENSSL in
code that depends on OpenSSL.
