I fell over this bug report that mentioned that libcurl could wrongly
send more than one complete messages at the end of a transfer. Reading
the code confirmed this, so I've added a new multi state to make it not
happen. The mentioned bug report was made by Brad Jorsch but is (oddly
enough) filed in Debian's bug tracker for the "wmweather+" tool.
Bug: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=593390
When detecting that the send or recv speed, the multi interface changes
state to TOOFAST and previously there was no timeout set that would
force a recheck but it would rely on the application to somehow call
libcurl anyway. This now sets a timeout for a suitable future time to
check again if the average transfer speed is then below the threshold
again.
Curl_expire() is now expanded to hold a list of timeouts for each easy
handle. Only the closest in time will be the one used as the primary
timeout for the handle and will be used for the splay tree (which sorts
and lists all handles within the multi handle).
When the main timeout has triggered/expired, the next timeout in time
that is kept in the list will be moved to the main timeout position and
used as the key to splay with. This way, all timeouts that are set with
Curl_expire() internally will end up as a proper timeout. Previously any
Curl_expire() that set a _later_ timeout than what was already set was
just silently ignored and thus missed.
Setting Curl_expire() with timeout 0 (zero) will cancel all previously
added timeouts.
Corrects known bug #62.
Instead of looping over all attached easy handles, this now keeps a list
of messages in the multi handle. It allows curl_multi_info_read() to
perform O(1) no matter how many easy handles that are handled. This is
of importance since this function may be polled very frequently by apps
using the multi interface.
The struct used for storing the message for a completed transfer is now
no longer allocated separatly but is kept within the main struct kept
for each easy handle so that we avoid one malloc (and the subsequent
free).
curl_multi perform has two phases: run through every easy handle calling
multi_runsingle and remove expired timers (timer removal).
If a small timer (e.g. 1-10ms) is set during multi_runsingle, then it's
possible that the timer has passed by when the timer removal runs. The
timer which was just added is then removed. This will potentially cause
the timer list to be empty and cause the next call to curl_multi_timeout
to return -1. Ideally, curl_multi_timeout should return 0 in this case.
One way to fix this is to move the struct timeval now = Curl_tvnow(); to
the top of curl_multi_perform. The change does that.
When curl_multi_remove_handle() is called and an easy handle is returned
to the connection cache held in the multi handle, then we cannot allow
CURLINFO_LASTSOCKET to extract it since that will more or less encourage
that the user uses the socket while it can get used by libcurl again.
Without this fix, we'd get a segfault in Curl_getconnectinfo() trying to
dereference the NULL pointer in 'data->state.connc'.
Bug: http://curl.haxx.se/bug/view.cgi?id=3023840
My additional call to Curl_pgrsUpdate() would sometimes get
called even though there's no connection (left) so a NULL pointer
would get passed, causing a segfault.
1) no need to call the progress function twice when in the
CURLM_STATE_TOOFAST state.
2) Make sure that the progress callback's return code is
acknowledged when used
As long as no error is reported, the progress function can get
called. This may be a little TOO often so we should keep an eye
on this and possibly make this conditional somehow.
Igor Novoseltsev reported a problem with the multi socket API and
using timeouts and timers. It boiled down to a problem with
libcurl's use of GetTickCount() interally to figure out the
current time, while Igor's own application code used another
function call.
It made his app call the socket API timeout function a bit
_before_ libcurl would consider the timeout to trigger, and that
could easily lead to timeouts or stalls in the app. It seems
GetTickCount() in general often has no better resolution than
16ms and switching to the alternative function
QueryPerformanceCounter has its share of problems:
http://www.virtualdub.org/blog/pivot/entry.php?id=106
We address this problem by simply having libcurl treat timers
that already has occured or will occur within 40ms subject for
treatment. I'm confident that there are other implementations and
operating systems with similarly in accurate timer functions so
it makes sense to have applied generically and I don't believe we
sacrifice much by adding a 40ms inaccuracy on these timeouts.
Hauke Duden provided an example program that made the multi
interface crash. His example simply used the multi interface and
did first one FTP transfer and after completion it used a second
easy handle and did another FTP transfer on the same FTP server.
This triggered a bug in the "delayed easy handle kill" system
that curl uses: when an FTP connection is left alive it must keep
an easy handle around internally - only for the purpose of having
an easy handle when it later disconnects it. The code assumed
that when the easy handle was removed and an internal reference
was made, that version could be killed later on when a new easy
handle came using the same connection. This was wrong as Hauke's
example showed that the removed handle wasn't killed for real
until later. This caused a double close attempt => segfault.
The problem mentioned on Dec 10 2009
(http://curl.haxx.se/bug/view.cgi?id=2905220) was only partially fixed.
Partially because an easy handle can be associated with many connections in
the cache (e.g. if there is a redirect during the lifetime of the easy
handle). The previous patch only cleaned up the first one. The new fix now
removes the easy handle from all connections, not just the first one.
simply check for CURLM_CALL_MULTI_PERFORM internally. This has the added
benefit that this goes in line with my long-term wishes to get rid of the
CURLM_CALL_MULTI_PERFORM all together from the public API.
state, we return CURLM_CALL_MULTI_PERFORM unconditionally then so that we
can act faster like in the case the protocol-specific connect doesn't block
on anything and we can just persue on the next action immediately. It also
then avoids a case where curl_multi_fdset() would return -1.
accessing alredy freed memory and thus crash when using HTTPS (with
OpenSSL), multi interface and the CURLOPT_DEBUGFUNCTION and a certain order
of cleaning things up. I fixed it.
(http://curl.haxx.se/bug/view.cgi?id=2891591)
strdup() that could lead to segfault if it returned NULL. I extended his
suggest patch to now have Curl_retry_request() return a regular return code
and better check that.
Fix SIGSEGV on free'd easy_conn when pipe unexpectedly breaks
Fix data corruption issue with re-connected transfers
Fix use after free if we're completed but easy_conn not NULL
With the curl memory tracking feature decoupled from the debug build feature,
CURLDEBUG and DEBUGBUILD preprocessor symbol definitions are used as follows:
CURLDEBUG used for curl debug memory tracking specific code (--enable-curldebug)
DEBUGBUILD used for debug enabled specific code (--enable-debug)
KEEP_RECV to better match the general terminology: receive and send is what we
do from the (remote) servers. We read and write from and to the local fs.
(http://curl.haxx.se/bug/view.cgi?id=2784055) identifying a problem to
connect to SOCKS proxies when using the multi interface. It turned out to
almost not work at all previously. We need to wait for the TCP connect to
be properly verified before doing the SOCKS magic.
There's still a flaw in the FTP code for this.
FTP with the multi interface: when a transfer fails, like when aborted by a
write callback, the control connection was wrongly closed and thus not
re-used properly.
This change is also an attempt to cleanup the code somewhat in this area, as
now the FTP code attempts to keep (better) track on pending responses
necessary to get read in ftp_done().
When using the multi interface over HTTP and the server returns a Location
header, the running easy handle will get stuck in the CURLM_STATE_PERFORM
state, leaving the external event loop stuck waiting for data from the
ingoing socket (when using the curl_multi_socket_action stuff). While this
bug was pretty hard to find, it seems to require only a one-line fix. The
break statement on line 1374 in multi.c caused the function to skip the call
to multistate().
How to reproduce this bug? Well, that's another question. evhiperfifo.c in
the examples directory chokes on this bug only _sometimes_, probably
depending on how fast the URLs are added. One way of testing the bug out is
writing to hiper.fifo from more than one source at the same time.
pipelining, as libcurl could then easily get confused and A) work on the
handle that was not "first in queue" on a pipeline, or even B) tell the app
to REMOVE a socket while it was in use by a second handle in a pipeline. Both
errors caused hanging or stalling applications.
was actually ready to get done, as the internal time resolution is higher
than the returned millisecond timer. Therefore it could cause applications
running on fast processors to do short bursts of busy-loops.
curl_multi_timeout() will now only return 0 if the timeout is actually
alreay triggered.
now has an improved ability to do right when the multi interface (both
"regular" and multi_socket) is used for SCP and SFTP transfers. This should
result in (much) less busy-loop situations and thus less CPU usage with no
speed loss.
removing easy handles from multi handles when the easy handle is/was within
a HTTP pipeline. His bug report #2351653
(http://curl.haxx.se/bug/view.cgi?id=2351653) was also related and was
eventually fixed by a patch by Igor himself.
(http://curl.haxx.se/bug/view.cgi?id=2351645) that identified a problem with
the multi interface that occured if you removed an easy handle while in
progress and the handle was used in a HTTP pipeline.
Ben Greear