... unless "--output -" is used. Binary detection is done by simply
checking for a binary zero in early data.
Added test 1425 1426 to verify.
Closes#1512
... and USE_ENVIRONMENT and --environment. It was once added for RISC OS
support and its platform specific behavior has been annoying ever
since. Added in commit c3c8bbd3b2, mostly unchanged since
then. Most probably not actually used for years.
Closes#1463
Test command 'time curl http://localhost/80GB -so /dev/null' on a Debian
Linux.
Before (middle performing run out 9):
real 0m28.078s
user 0m11.240s
sys 0m12.876s
After (middle performing run out 9)
real 0m26.356s (93.9%)
user 0m5.324s (47.4%)
sys 0m8.368s (65.0%)
Also, doing SFTP over a 200 millsecond latency link is now about 6 times
faster.
Closes#1446
MinGW complains:
tool_operate.c:197:15: error: comparison is always true due to limited range
of data type [-Werror=type-limits]
Fix this by only doing the comparison if 'long' is large enough to hold the
constant it is compared with.
Closes https://github.com/curl/curl/pull/1378
- Show the HTTPS-proxy options on CURLE_SSL_CACERT if libcurl was built
with HTTPS-proxy support.
Prior to this change those options were shown only if an HTTPS-proxy was
specified by --proxy, but that did not take into account environment
variables such as http_proxy, https_proxy, etc. Follow-up to e1187c4.
Bug: https://github.com/curl/curl/issues/1331
Reported-by: Nehal J Wani
- Add new option CURLOPT_SUPPRESS_CONNECT_HEADERS to allow suppressing
proxy CONNECT response headers from the user callback functions
CURLOPT_HEADERFUNCTION and CURLOPT_WRITEFUNCTION.
- Add new tool option --suppress-connect-headers to expose
CURLOPT_SUPPRESS_CONNECT_HEADERS and allow suppressing proxy CONNECT
response headers from --dump-header and --include.
Assisted-by: Jay Satiro
Assisted-by: CarloCannas@users.noreply.github.com
Closes https://github.com/curl/curl/pull/783
This commit introduces the CURL_SSLVERSION_MAX_* constants as well as
the --tls-max option of the curl tool.
Closes https://github.com/curl/curl/pull/1166
- Change CURLOPT_PROXY_CAPATH to return CURLE_NOT_BUILT_IN if the option
is not supported, which is the same as what we already do for
CURLOPT_CAPATH.
- Change the curl tool to handle CURLOPT_PROXY_CAPATH error
CURLE_NOT_BUILT_IN as a warning instead of as an error, which is the
same as what we already do for CURLOPT_CAPATH.
- Fix CAPATH docs to show that CURLE_NOT_BUILT_IN is returned when the
respective CAPATH option is not supported by the SSL library.
Ref: https://github.com/curl/curl/pull/1257
When CURLE_SSL_CACERT occurs the tool shows a lengthy error message to
the user explaining possible solutions such as --cacert and --insecure.
This change appends to that message similar options --proxy-cacert and
--proxy-insecure when there's a specified HTTPS proxy.
Closes https://github.com/curl/curl/issues/1258
In addition to unix domain sockets, Linux also supports an
abstract namespace which is independent of the filesystem.
In order to support it, add new CURLOPT_ABSTRACT_UNIX_SOCKET
option which uses the same storage as CURLOPT_UNIX_SOCKET_PATH
internally, along with a flag to specify abstract socket.
On non-supporting platforms, the abstract address will be
interpreted as an empty string and fail gracefully.
Also add new --abstract-unix-socket tool parameter.
Signed-off-by: Isaac Boukris <iboukris@gmail.com>
Reported-by: Chungtsun Li (typeless)
Reviewed-by: Daniel Stenberg
Reviewed-by: Peter Wu
Closes#1197Fixes#1061
The <netinet/tcp.h> is a leftover from the past when TCP socket options
were set in this file. This include causes build issues on AIX 4.3.
Reported-by: Kim Minjoong
Closes#1178
CURLOPT_SOCKS_PROXY -> CURLOPT_PRE_PROXY
Added the corresponding --preroxy command line option. Sets a SOCKS
proxy to connect to _before_ connecting to a HTTP(S) proxy.
... the newly introduced CURLOPT_SOCKS_PROXY is special and should be
asked for specially. (Needs new code.)
Unified proxy type to a single variable in the config struct.
This was added as part of the SOCKS+HTTPS proxy merge but there's no
need to support this as we prefer to have the protocol specified as a
prefix instead.
* HTTPS proxies:
An HTTPS proxy receives all transactions over an SSL/TLS connection.
Once a secure connection with the proxy is established, the user agent
uses the proxy as usual, including sending CONNECT requests to instruct
the proxy to establish a [usually secure] TCP tunnel with an origin
server. HTTPS proxies protect nearly all aspects of user-proxy
communications as opposed to HTTP proxies that receive all requests
(including CONNECT requests) in vulnerable clear text.
With HTTPS proxies, it is possible to have two concurrent _nested_
SSL/TLS sessions: the "outer" one between the user agent and the proxy
and the "inner" one between the user agent and the origin server
(through the proxy). This change adds supports for such nested sessions
as well.
A secure connection with a proxy requires its own set of the usual SSL
options (their actual descriptions differ and need polishing, see TODO):
--proxy-cacert FILE CA certificate to verify peer against
--proxy-capath DIR CA directory to verify peer against
--proxy-cert CERT[:PASSWD] Client certificate file and password
--proxy-cert-type TYPE Certificate file type (DER/PEM/ENG)
--proxy-ciphers LIST SSL ciphers to use
--proxy-crlfile FILE Get a CRL list in PEM format from the file
--proxy-insecure Allow connections to proxies with bad certs
--proxy-key KEY Private key file name
--proxy-key-type TYPE Private key file type (DER/PEM/ENG)
--proxy-pass PASS Pass phrase for the private key
--proxy-ssl-allow-beast Allow security flaw to improve interop
--proxy-sslv2 Use SSLv2
--proxy-sslv3 Use SSLv3
--proxy-tlsv1 Use TLSv1
--proxy-tlsuser USER TLS username
--proxy-tlspassword STRING TLS password
--proxy-tlsauthtype STRING TLS authentication type (default SRP)
All --proxy-foo options are independent from their --foo counterparts,
except --proxy-crlfile which defaults to --crlfile and --proxy-capath
which defaults to --capath.
Curl now also supports %{proxy_ssl_verify_result} --write-out variable,
similar to the existing %{ssl_verify_result} variable.
Supported backends: OpenSSL, GnuTLS, and NSS.
* A SOCKS proxy + HTTP/HTTPS proxy combination:
If both --socks* and --proxy options are given, Curl first connects to
the SOCKS proxy and then connects (through SOCKS) to the HTTP or HTTPS
proxy.
TODO: Update documentation for the new APIs and --proxy-* options.
Look for "Added in 7.XXX" marks.
As they are after all part of the public API. Saves space and reduces
complexity. Remove the strcase defines from the curlx_ family.
Suggested-by: Dan Fandrich
Idea: https://curl.haxx.se/mail/lib-2016-10/0136.html
... to make it less likely that we forget that the function actually
does case insentive compares. Also replaced several invokes of the
function with a plain strcmp when case sensitivity is not an issue (like
comparing with "-").
After a few wasted hours hunting down the reason for slowness during a
TLS handshake that turned out to be because of TCP_NODELAY not being
set, I think we have enough motivation to toggle the default for this
option. We now enable TCP_NODELAY by default and allow applications to
switch it off.
This also makes --tcp-nodelay unnecessary, but --no-tcp-nodelay can be
used to disable it.
Thanks-to: Tim Rühsen
Bug: https://curl.haxx.se/mail/lib-2016-06/0143.html
- Move the existing scheme check from tool_operate.
In the case of --remote-header-name we want to parse Content-disposition
for a filename, but only if the scheme is http or https. A recent
adjustment 0dc4d8e was made to account for schemeless URLs however it's
not 100% accurate. To remedy that I've moved the scheme check to the
header callback, since at that point the library has already determined
the scheme.
Bug: https://github.com/curl/curl/issues/760
Reported-by: Kai Noda
It does open up a miniscule risk that one of the other protocols that
libcurl could use would send back a Content-Disposition header and then
curl would act on it even if not HTTP.
A future mitigation for this risk would be to allow the callback to ask
libcurl which protocol is being used.
Verified with test 1312
Closes#760
The underlying libcurl option used for this feature is
CURLOPT_FTP_CREATE_MISSING_DIRS which has the ability to retry the dir
creation, but it was never set to do that by the command line tool.
Now it does.
Bug: https://curl.haxx.se/mail/archive-2016-04/0021.html
Reported-by: John Wanghui
Help-by: Leif W
As these two options provide identical functionality, the former for
SOCK5 proxies and the latter for HTTP proxies, merged the two options
together.
As such CURLOPT_SOCKS5_GSSAPI_SERVICE is marked as deprecated as of
7.49.0.
- Add tests.
- Add an example to CURLOPT_TFTP_NO_OPTIONS.3.
- Add --tftp-no-options to expose CURLOPT_TFTP_NO_OPTIONS.
Bug: https://github.com/curl/curl/issues/481
- Add unit test 1604 to test the sanitize_file_name function.
- Use -DCURL_STATICLIB when building libcurltool for unit testing.
- Better detection of reserved DOS device names.
- New flags to modify sanitize behavior:
SANITIZE_ALLOW_COLONS: Allow colons
SANITIZE_ALLOW_PATH: Allow path separators and colons
SANITIZE_ALLOW_RESERVED: Allow reserved device names
SANITIZE_ALLOW_TRUNCATE: Allow truncating a long filename
- Restore sanitization of banned characters from user-specified outfile.
Prior to this commit sanitization of a user-specified outfile was
temporarily disabled in 2b6dadc because there was no way to allow path
separators and colons through while replacing other banned characters.
Now in such a case we call the sanitize function with
SANITIZE_ALLOW_PATH which allows path separators and colons to pass
through.
Closes https://github.com/curl/curl/issues/624
Reported-by: Octavio Schroeder
Due to path separators being incorrectly sanitized in --output
pathnames, eg -o c:\foo => c__foo
This is a partial revert of 3017d8a until I write a proper fix. The
remote-name will continue to be sanitized, but if the user specified an
--output with string replacement (#1, #2, etc) that data is unsanitized
until I finish a fix.
Bug: https://github.com/bagder/curl/issues/624
Reported-by: Octavio Schroeder
curl does not sanitize colons in a remote file name that is used as the
local file name. This may lead to a vulnerability on systems where the
colon is a special path character. Currently Windows/DOS is the only OS
where this vulnerability applies.
CVE-2016-0754
Bug: http://curl.haxx.se/docs/adv_20160127B.html
Make this the default for the curl tool (if built with HTTP/2 powers
enabled) unless a specific HTTP version is requested on the command
line.
This should allow more users to get HTTP/2 powers without having to
change anything.
They didn't match the ifdef logic used within libcurl anyway so they
could indeed warn for the wrong case - plus the tool cannot know how the
lib actually performs at that level.
They tend to never get updated anyway so they're frequently inaccurate
and we never go back to revisit them anyway. We document issues to work
on properly in KNOWN_BUGS and TODO instead.
It uses 'Note:' as a prefix as opposed to the common 'Warning:' to take
down the tone a bit.
It adds a warning for using -XHEAD on other methods becasue that may
lead to a hanging connection.
It isn't always clear to the user which options that cause the HTTP
methods to conflict so by spelling them out it should hopefully be
easier to understand why curl complains.
- Add new option CURLOPT_DEFAULT_PROTOCOL to allow specifying a default
protocol for schemeless URLs.
- Add new tool option --proto-default to expose
CURLOPT_DEFAULT_PROTOCOL.
In the case of schemeless URLs libcurl will behave in this way:
When the option is used libcurl will use the supplied default.
When the option is not used, libcurl will follow its usual plan of
guessing from the hostname and falling back to 'http'.
New tool option --ssl-no-revoke.
New value CURLSSLOPT_NO_REVOKE for CURLOPT_SSL_OPTIONS.
Currently this option applies only to WinSSL where we have automatic
certificate revocation checking by default. According to the
ssl-compared chart there are other backends that have automatic checking
(NSS, wolfSSL and DarwinSSL) so we could possibly accommodate them at
some later point.
Bug: https://github.com/bagder/curl/issues/264
Reported-by: zenden2k <zenden2k@gmail.com>
Follow-up to e8423f9ce1 with discussionis in
https://github.com/bagder/curl/pull/258
This check scans for fopen() with a mode string without 'b' present, as
it may indicate that an FOPEN_* define should rather be used.
This commit fixes a regression introduced in curl-7_41_0-186-g261a0fe.
It also introduces a regression test 1424 based on tests 78 and 1423.
Reported-by: Viktor Szakats
Bug: https://github.com/bagder/curl/issues/237
As the 'error' and 'mute' options are now part of the GlobalConfig,
rather than per Operation, updated the warnf() function to use this
structure rather than the OperationConfig.
There was a mix of GlobCode, CURLcode and ints and they were mostly
passing around CURLcode errors. This change makes the functions use only
CURLcode and removes the GlobCode type completely.
Mark CURLOPT_UNIX_SOCKET_PATH as string to ensure that it ends up as
option in the file generated by --libcurl.
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Coverity CID 1243583. get_url_file_name() cannot fail and return a NULL
file name pointer so skip the check for that - it tricks coverity into
believing it can happen and it then warns later on when we use 'outfile'
without checking for NULL.
Option --pinnedpubkey takes a path to a public key in DER format and
only connect if it matches (currently only implemented with OpenSSL).
Provides CURLOPT_PINNEDPUBLICKEY for curl_easy_setopt().
Extract a public RSA key from a website like so:
openssl s_client -connect google.com:443 2>&1 < /dev/null | \
sed -n '/-----BEGIN/,/-----END/p' | openssl x509 -noout -pubkey \
| openssl rsa -pubin -outform DER > google.com.der
Ensure a source file isn't generated for the following informational
command line parameters when --libcurl is specified:
--help, --manual, --version and --engine list
As the output would only include a fairly empty looking main() function
and a call to curl_easy_init() and curl_easy_cleanup() when performed
with --engine list.
Correctly output libcurl source code that includes multiply operations
as specified by --next. Note that each operation evaluates to a single
curl_easy_perform() in source code form.
Also note that the output could be optimised a little so global config
options are only output once rather than per operation as is presently
the case.
In preparation for separating the global config options from the per
operation config options, reworked the list engines code to not use a
member variable in the Configurable structure.
To help assist with the detection of incorrect return codes, as per
commits ee23d13a79, 33b8960dc8 and aba98991a5, updated the operate
based functions to return CURLcode error codes.
During initialisation SetHTTPrequest() may fail and cURL would return
PARAM_BAD_USE, which is equivalent to CURLE_NOT_BUILT_IN in cURL error
terms.
Instead, return CURLE_FAILED_INIT as we do for other functions that may
fail during initialisation.
Rather than check for required arguments, and prompt for any host and
proxy passwords, as each operation is performed, changed the code so
all configurations are checked before any operations are performed.
This allows the user to input all the required passwords, for example,
upfront rather than wait for each operation.
Since protocol headers contain explicit line-endings there should
be no automatic conversion to ASCII text or CRLF line-endings.
This might break third party tools that already depend on this
behaviour. We might need to introduce an option to make this optional.
Commmit c5f8e2f5f4 removed the easy handle clean-up from tool_operate,
letting the code that was already present in free_config_fields()
perform the task. Unfortunately, this wasn't the correct place to do
this as it broke protocols, that would perform a logout, as the main
clean-up in tool_main had already been called.
when using --http2 one can now selectively disable NPN or ALPN with
--no-alpn and --no-npn. for now honored with NSS only.
TODO: honor this option with GnuTLS and OpenSSL
In the rare instance where getparameter() may return PARAM_NO_MEM whilst
parsing a URL, cURL would return this error code, which is equivalent to
CURLE_FTP_ACCEPT_FAILED in cURL error codes terms.
Instead, return CURLE_FAILED_INIT and output the failure reason as per
the other usage of getparameter().
To avoid the regression when users pass in passwords containing semi-
colons, we now drop the ability to set the login options with the same
options. Support for login options in CURLOPT_USERPWD was added in
7.31.0.
Test case 83 was modified to verify that colons and semi-colons can be
used as part of the password when using -u (CURLOPT_USERPWD).
Bug: http://curl.haxx.se/bug/view.cgi?id=1311
Reported-by: Petr Bahula
Assisted-by: Steve Holme
Signed-off-by: Daniel Stenberg <daniel@haxx.se>
Commit 32352ed6ad introduced various DNS options, however, these
would cause curl to exit with CURLE_NOT_BUILT_IN when c-ares wasn't
being used as the backend resolver even if the options weren't set
by the user.
Additionally corrected some minor coding style errors from the same
commit.
Moved the calls to checkpasswd() out of the getparameter() function
which allows for any related arguments to be specified on the command
line before or after --user (and --proxy-user).
For example: --bearer doesn't need to be specified before --user to
prevent curl from asking for an unnecessary password as is the case
with commit e7dcc454c6.
Added the ability to specify an XOAUTH2 bearer token [RFC6750] via the
--bearer option.
Example usage:
curl --url "imaps://imap.gmail.com:993/INBOX/;UID=1" --ssl-reqd
--bearer ya29.AHES6Z...OMfsHYI --user username@example.com
This function is meant to work *exactly* as curl_easy_perform() but will
use the event-based libcurl API internally instead of
curl_multi_perform(). To avoid relying on an actual event-based library
and to not use non-portable functions (like epoll or similar), there's a
rather inefficient emulation layer implemented on top of Curl_poll()
instead.
There's currently some convenience logging done in curl_easy_perform_ev
which helps when tracking down problems. They may be suitable to remove
or change once things seem to be fine enough.
curl has a new --test-event option when built with debug enabled that
then uses curl_easy_perform_ev() instead of curl_easy_perform(). If
built without debug, using --test-event will only output a warning
message.
NOTE: curl_easy_perform_ev() is not part if the public API on purpose.
It is only present in debug builds of libcurl and MUST NOT be considered
stable even then. Use it for libcurl-testing purposes only.
runtests.pl now features an -e command line option that makes it use
--test-event for all curl command line tests. The man page is updated.
A rather big overhaul and cleanup.
1 - curl wouldn't properly detect and reject globbing that ended with an
open brace if there were brackets or braces before it. Like "{}{" or
"[0-1]{"
2 - curl wouldn't properly reject empty lists so that "{}{}" would
result in curl getting (nil) strings in the output.
3 - By using strtoul() instead of sscanf() the code will now detected
over and underflows. It now also better parses the step argument to only
accept positive numbers and only step counters that is smaller than the
delta between the maximum and minimum numbers.
4 - By switching to unsigned longs instead of signed ints for the
counters, the max values for []-ranges are now very large (on 64bit
machines).
5 - Bumped the maximum number of globs in a single URL to 100 (from 10)
6 - Simplified the code somewhat and now it stores fixed strings as
single- entry lists. That's also one of the reasons why I did (5) as now
all strings between "globs" will take a slot in the array.
Added test 1234 and 1235 to verify. Updated test 87.
This commit fixes three separate bug reports.
Bug: http://curl.haxx.se/bug/view.cgi?id=1264
Bug: http://curl.haxx.se/bug/view.cgi?id=1265
Bug: http://curl.haxx.se/bug/view.cgi?id=1266
Reported-by: Will Dietz
Two fixes:
1. Force output file format to be stream-lf so that partial downloads
can be continued.
This should have minor impact as if the file does not exist, it was
created with stream-lf format. The only time this was an issue is if
there was already an existing file with a different format.
2. Fix file uploads are now fixed.
a. VMS binary files such as ZIP archives are now uploaded
correctly.
b. VMS text files are read once to get the correct size
and then converted to line-feed terminated records as
they are read into curl.
The default VMS text formats do not contain either line-feed or
carriage-return terminated records. Those delimiters are added by the
operating system file read calls if the application requests them.
Bug: http://curl.haxx.se/bug/view.cgi?id=496
We no longer pass our 'bool' data type variables nor constants as
an argument to my_setopt(), instead we use proper 1L or 0L values.
This also fixes macro used to pass string argument for CURLOPT_SSLCERT,
CURLOPT_SSLKEY and CURLOPT_EGDSOCKET using my_setopt_str() instead of
my_setopt().
This also casts enum or int argument data types to long when passed to
my_setopt_enum().
Implement wrappers around strtod to convert the user argument to a
double with sane error checking. Use this to allow --max-time and
--connect-timeout to accept decimal values instead of strictly integers.
The manpage is updated to make mention of this feature and,
additionally, forewarn that the actual timeout of the operation can
vary in its precision (particularly as the value increases in its
decimal precision).
