- For all *FUNCTION options, they now all show the complete prototype in
the description. Previously some of them would just refer to a
typedef'ed function pointer in the curl.h header.
- I made the phrasing of that "Pass a pointer to a function that matches
the following prototype" the same for all *FUNCTION option descriptions.
- I removed some uses of 'should'. I think I sometimes over-use this
word as in many places I actually mean MUST or otherwise more specific
and not-so-optional synonyms.
Setting bit 2 for this value was documented as having a constant value
defined as CURL_REDIR_POST_303 yet referenced a 302 request.
Additionally corrected the meaning of CURL_REDIR_POST_ALL for all three
bits and fixed problems with the bolding of keywords in this section.
Standardised how RFCs are referenced so that the website may autolink to
the correct documentation on ietf.org. Additionally removed the one link
to RFC3986 on curl.haxx.se.
If an empty string is passed to CURLOPT_SSH_PUBLIC_KEYFILE, libcurl will
pass no public key to libssh2 which then tries to compute it from the
private key. This is known to work when libssh2 1.4.0+ is linked against
OpenSSL.
Set the conn->data->info.httpcode variable in smtp_statemach_act() to
allow Curl_getinfo() to return the SMTP response code via the
CURLINFO_RESPONSE_CODE action.
Added information relating to the new CURLOPT_MAIL_AUTH parameter and
reworked CURLOPT_MAIL_FROM and CURLOPT_MAIL_RCPT to be a clearer.
Fixed inconsistencies of "vocalisation of the abbreviation" versus
"vocalisation of the first word" for all abbreviations.
Corrected a typo in CURLOPT_NOPROXY.
Allow an appliction to set libcurl specific SSL options. The first and
only options supported right now is CURLSSLOPT_ALLOW_BEAST.
It will make libcurl to disable any work-arounds the underlying SSL
library may have to address a known security flaw in the SSL3 and TLS1.0
protocol versions.
This is a reaction to us unconditionally removing that behavior after
this security advisory:
http://curl.haxx.se/docs/adv_20120124B.html
... it did however cause a lot of programs to fail because of old
servers not liking this work-around. Now programs can opt to decrease
the security in order to interoperate with old servers better.
This adds three new options to control the behavior of TCP keepalives:
- CURLOPT_TCP_KEEPALIVE: enable/disable probes
- CURLOPT_TCP_KEEPIDLE: idle time before sending first probe
- CURLOPT_TCP_KEEPINTVL: delay between successive probes
While not all operating systems support the TCP_KEEPIDLE and
TCP_KEEPINTVL knobs, the library will still allow these options to be
set by clients, silently ignoring the values.
1- Two new error codes are introduced.
CURLE_FTP_ACCEPT_FAILED to be set whenever ACCEPTing fails because of
FTP server connected.
CURLE_FTP_ACCEPT_TIMEOUT to be set whenever ACCEPTing timeouts.
Neither of these errors are considered fatal and control connection
remains OK because it could just be a firewall blocking server to
connect to the client.
2- One new setopt option was introduced.
CURLOPT_ACCEPTTIMEOUT_MS
It sets the maximum amount of time FTP client is going to wait for a
server to connect. Internal default accept timeout is 60 seconds.
Parameters were underquoted, resulting in
warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
Do not try to resolve interfaces names via DNS by recognizing interface
names in a few ways. If the interface option argument has a prefix of
"if!" then treat the argument as only an interface. Similarly, if the
interface argument is the name of an interface (even if it does not have
an IP address assigned), treat it as an interface name. Finally, if the
interface argument is prefixed by "host!" treat it as a hostname that
must be resolved by /etc/hosts or DNS.
These changes allow a client using the multi interfaces to avoid
blocking on name resolution if the interface loses its IP address or
disappears.
If the option is set to 0, the default timeout will be used - which in
modern libcurl versions equals 300 seconds (== 5 minutes).
Bug: http://curl.haxx.se/mail/lib-2011-12/0051.html
Reported by: Vladimir Grishchenko
When the new socket is created for an active connection, it is now done
using the open socket callback.
Test case 596 was modified to run fine, although it hides the fact that
the close callback is still called too many times, as it also gets
called for closing sockets that were created with accept().
Experience has shown that the symbols-in-versions file is very useful to
applications that want to build with a wide range of libcurl versions.
It is however easy to get it wrong and the source gets a bit messy with
all the fixed numerical comparisions.
The point of this script is to provide an easy-to-use macro for libcurl-
using applications to do preprocessor checks for specific libcurl
defines, and yet make the code clearly show what the macro is used for.
Added pop3 username and password example as well as an explanation of
how path part of the URL is used under pop3.
Additionally have corrected a couple of typos.
Don't even declare the struct members for disabled features
Introducing the CURLSHE_NOT_BUILT_IN return code for the share interface
when trying to set a sharing option that has been disabled (or not
enabled) in the library.
Slight rewording of the CURLOPT_URL SMTP sub-section.
Corrected the incorrect use of hyphens on the three uses of
"zero-terminated" with "zero terminated" to match the rest of the
document.
Corrected the use of an out of place hyphen in CURLOPT_NOPROXY section.
Allow (*curl_write_callback) write callbacks to return
CURL_WRITEFUNC_OUT_OF_MEMORY to properly indicate libcurl of OOM conditions
inside the callback itself.
If a socket is larger than FD_SETSIZE, avoid using FD_SET() on the
platforms where this is possible.
Bug: http://curl.haxx.se/bug/view.cgi?id=3413274
Reported by: Tim Starling
Using 'socks5h' as proxy protocol will make it a
CURLPROXY_SOCKS5_HOSTNAME proxy which is SOCKS5 and asking the proxy to
resolve host names. I found no "standard" protocol name for this.
Clarify that the '-', '.', '_' or '~' letters are also not escaped since
they shouldn't according to RFC3986 section 2.3.
This is how this function has behaved since sep 2010, commit
5df13c3173.
Added CURLOPT_TRANSFER_ENCODING as the option to set to request Transfer
Encoding in HTTP requests (if built zlib enabled). I also renamed
CURLOPT_ENCODING to CURLOPT_ACCEPT_ENCODING (while keeping the old name
around) to reduce the confusion when we have to encoding options for
HTTP.
--tr-encoding is now the new command line option for curl to request
this, and thus I updated the test cases accordingly.
Stop the abuse of CURLE_FAILED_INIT as return code for things not being
init related by introducing two new return codes:
CURLE_NOT_BUILT_IN and CURLE_UNKNOWN_OPTION
CURLE_NOT_BUILT_IN replaces return code 4 that has been obsoleted for
several years. It is used for returning error when something is
attempted to be used but the feature/option was not enabled or
explictitly disabled at build-time. Getting this error mostly means that
libcurl needs to be rebuilt.
CURLE_FAILED_INIT is now saved and used strictly for init
failures. Getting this problem means something went seriously wrong,
like a resource shortage or similar.
CURLE_UNKNOWN_OPTION is the option formerly known as
CURLE_UNKNOWN_TELNET_OPTION (and the old name is still present,
separately defined to be removed in a very distant future). This error
code is meant to be used to return when an option is given to libcurl
that isn't known. This problem would mostly indicate a problem in the
program that uses libcurl.
The read callback must return the exact requested amount of data when it
is used for doing TFTP uploads. This is due to how it deals with data
internally. This could/should be fixed but for now we document the
existing behavior.
Reported by: Colin Blair
Bug: http://curl.haxx.se/mail/lib-2011-03/0319.html
When NSS-powered libcurl connected to a SSL server with
CURLOPT_SSL_VERIFYPEER equal to zero, NSS remembered that the peer
certificate was accepted by libcurl and did not ask the second time when
connecting to the same server with CURLOPT_SSL_VERIFYPEER equal to one.
This patch turns off the SSL session cache for the particular SSL socket
if peer verification is disabled. In order to avoid any performance
impact, the peer verification is completely skipped in that case, which
makes it even faster than before.
Bug: https://bugzilla.redhat.com/678580
On second thought, I think CURLE_TLSAUTH_FAILED should be eliminated. It
was only being raised when an internal error occurred while allocating
or setting the GnuTLS SRP client credentials struct. For TLS
authentication failures, the general CURLE_SSL_CONNECT_ERROR seems
appropriate; its error string already includes "passwords" as a possible
cause. Having a separate TLS auth error code might also cause people to
think that a TLS auth failure means the wrong username or password was
entered, when it could also be a sign of a man-in-the-middle attack.
... and update the curl.1 and curl_easy_setopt.3 man pages such that
they do not suggest to use an OpenSSL utility if curl is not built
against OpenSSL.
Bug: https://bugzilla.redhat.com/669702
This is a meta symbol. OR this value together with a single specific
auth value to force libcurl to probe for un-restricted auth and if not,
only that single auth algorithm is acceptable.
For example you can use CURLAUTH_DIGEST|CURLAUTH_ONLY to make libcurl
first probe for what method to use, but yet only consider Digest to be
acceptable.
Using _only_ CURLAUTH_DIGEST without the CURLAUTH_ONLY field, will make
libcurl explicitly use Digest right away and not do any probing.
I've developed a script I call symbol-scan.pl that scans the curl.h and
multi.h header files and compare the symbols it finds in there with the
symbols symbols-in-versions documents and outputs a report on the
differences. Using this I've dug through the history to fill up
symbols-in-versions with all the symbols my script found mismatches for.
I will commit symbol-scan.pl separatly and think of a way to put it to
use in the build/tests so that we from now on will get this in-sync
check automatically.
The invocation of autoconf's AC_PATH_PROG( ) is not quite right for
finding curl-config. This fix corrects the negative case (where
curl-config is not found).
The macro provides a --with-libcurl option that expects a PREFIX to be
specified and not actually a "directory" in which libcurl will be found.
This now spells that out more clearly.
Reported by: Dan Locks
Bug: http://curl.haxx.se/bug/view.cgi?id=3079891
The numerical value passed to CURLOPT_RESUME_FROM for FTP uploads is
interpreted and used as position where to resume the _reading_ of the
local file and it will "blindly" append that data on the remote
file. This was certainly not clear in the docs previously.
Reported by: catalin
Bug: http://curl.haxx.se/bug/view.cgi?id=3048174
In some places where the name 'stream' has been used for naming a
function argument that is in fact settable with a setopt() option we now
call that argument 'userdata' to make it more obvious that it is in fact
possible to set by the application.
Suggested by: Jeff Pohlmeyer
The SOCKET type in Win64 is 64 bits large (and thus so is curl_socket_t
on that platform), and long is only 32 bits. It makes it impossible for
curl_easy_getinfo() to return a socket properly with the
CURLINFO_LASTSOCKET option as for all other operating systems.
curl_multi_timeout(3) is simply the wrong function to use
if you're using the multi_socket API and this document now
states this pretty clearly to help guiding users.
properly in angle brackets. Recipients provided with CURLOPT_MAIL_RCPT now
get angle bracket wrapping automatically by libcurl unless the recipient
starts with an angle bracket as then the app is assumed to deal with that
properly on its own.
simply check for CURLM_CALL_MULTI_PERFORM internally. This has the added
benefit that this goes in line with my long-term wishes to get rid of the
CURLM_CALL_MULTI_PERFORM all together from the public API.
command is a special "hack" used by the drftpd server, but even though it is
a custom extension I've deemed it fine to add to libcurl since this server
seems to survive and people keep using it and want libcurl to support
it. The new libcurl option is named CURLOPT_FTP_USE_PRET, and it is also
usable from the curl tool with --ftp-pret. Using this option on a server
that doesn't support this command will make libcurl fail.
With the curl memory tracking feature decoupled from the debug build feature,
CURLDEBUG and DEBUGBUILD preprocessor symbol definitions are used as follows:
CURLDEBUG used for curl debug memory tracking specific code (--enable-curldebug)
DEBUGBUILD used for debug enabled specific code (--enable-debug)
Chen pointed out how curl couldn't upload with resume when reading from a
pipe.
This ended up with the introduction of a new return code for the
CURLOPT_SEEKFUNCTION callback that basically says that the seek failed but
that libcurl may try to resolve the situation anyway. In our case this means
libcurl will attempt to instead read that much data from the stream instead
of seeking and that way curl can now upload with resume when data is read
from a stream!
and 1 on fatal errors. Previously it only mentioned non-zero on fatal
errors. This is a slight change in meaning, but it follows what we've done
elsewhere before and it opens up for LOTS of more useful return codes
whenever we can think of them...
(http://curl.haxx.se/docs/adv_20090303.html also known as CVE-2009-0037) in
which previous libcurl versions (by design) can be tricked to access an
arbitrary local/different file instead of a remote one when
CURLOPT_FOLLOWLOCATION is enabled. This flaw is now fixed in this release
together this the addition of two new setopt options for controlling this
new behavior:
o CURLOPT_REDIR_PROTOCOLS controls what protocols libcurl is allowed to
follow to when CURLOPT_FOLLOWLOCATION is enabled. By default, this option
excludes the FILE and SCP protocols and thus you nee to explicitly allow
them in your app if you really want that behavior.
o CURLOPT_PROTOCOLS controls what protocol(s) libcurl is allowed to fetch
using the primary URL option. This is useful if you want to allow a user or
other outsiders control what URL to pass to libcurl and yet not allow all
protocols libcurl may have been built to support.
CURLINFO_CONTENT_LENGTH_DOWNLOAD and CURLINFO_CONTENT_LENGTH_UPLOAD return
-1 if the sizes aren't know. Previously these returned 0, make it impossible
to detect the difference between actually zero and unknown.
plain FTP connections, and it will then allow MKD to fail once and retry the
CWD afterwards. This is especially useful if you're doing many simultanoes
connections against the same server and they all have this option enabled,
as then CWD may first fail but then another connection does MKD before this
connection and thus MKD fails but trying CWD works! The numbers can
(should?) now be set with the convenience enums now called
CURLFTP_CREATE_DIR and CURLFTP_CREATE_DIR_RETRY.
Tests has proven that if you're making an application that uploads a set of
files to an ftp server, you will get a noticable gain in speed if you're
using multiple connections and this option will be then be very useful.
the condition in the previous request was unmet. This is typically a time
condition set with CURLOPT_TIMECONDITION and was previously not possible to
reliably figure out. From bug report #2565128
(http://curl.haxx.se/bug/view.cgi?id=2565128)
version 1.1 instead of 1.0 like before. This change also introduces the new
proxy type for libcurl called 'CURLPROXY_HTTP_1_0' that then allows apps to
switch (back) to CONNECT 1.0 requests. The curl tool also got a --proxy1.0
option that works exactly like --proxy but sets CURLPROXY_HTTP_1_0.
I updated all test cases cases that use CONNECT and I tried to do some using
--proxy1.0 and some updated to do CONNECT 1.1 to get both versions run.
CURLOPT_SOCKS5_GSSAPI_SERVICE and CURLOPT_SOCKS5_GSSAPI_NEC to allow libcurl
to do GSS-style authentication with SOCKS5 proxies. The curl tool got the
options called --socks5-gssapi-service and --socks5-gssapi-nec to enable
these.
They basically offer the same thing the NO_PROXY environment variable only
offered previously: list a set of host names that shall not use the proxy
even if one is specified.
there are servers "out there" that relies on the client doing this broken
Digest authentication. Apache even comes with an option to work with such
broken clients.
The difference is only for URLs that contain a query-part (a '?'-letter and
text to the right of it).
libcurl now supports this quirk, and you enable it by setting the
CURLAUTH_DIGEST_IE bit in the bitmask you pass to the CURLOPT_HTTPAUTH or
CURLOPT_PROXYAUTH options. They are thus individually controlled to server
and proxy.
make CURLOPT_PROXYUSERPWD sort of deprecated. The primary motive for adding
these new options is that they have no problems with the colon separator
that the CURLOPT_PROXYUSERPWD option does.
curl_easy_setopt: CURLOPT_USERNAME and CURLOPT_PASSWORD that sort of
deprecates the good old CURLOPT_USERPWD since they allow applications to set
the user name and password independently and perhaps more importantly allow
both to contain colon(s) which CURLOPT_USERPWD doesn't fully support.
enabling this feature with CURLOPT_CERTINFO for a request using SSL (HTTPS
or FTPS), libcurl will gather lots of server certificate info and that info
can then get extracted by a client after the request has completed with
curl_easy_getinfo()'s CURLINFO_CERTINFO option. Linus Nielsen Feltzing
helped me test and smoothen out this feature.
Unfortunately, this feature currently only works with libcurl built to use
OpenSSL.
This feature was sponsored by networking4all.com - thanks!
parser to allow numerical IPv6-addresses to be specified with the scope
given, as per RFC4007 - with a percent letter that itself needs to be URL
escaped. For example, for an address of fe80::1234%1 the HTTP URL is:
"http://[fe80::1234%251]/"
non-zero with the fixed value of 1. We should strive at making options
support '1' for enabling them mentioned explicitly, as that then will allow
us for to extend them in the future without breaking older programs.
curl-library list on July 9th 2008 by Mathew Hounsell)
NOTE: the name resolve functions of various libc implementations don't re-read
name server information unless explicitly told so (by for example calling
Ires_init(3). This may cause libcurl to keep using the older server even
if DHCP has updated the server info, and this may look like a DNS cache issue
to the casual libcurl-app user.
CURLINFO_APPCONNECT_TIME. This is set with the "application layer"
handshake/connection is completed (typically SSL, TLS or SSH). By using this
you can figure out the application layer's own connect time. You can extract
the time stamp using curl's -w option and the new variable named
'time_appconnect'. This feature was sponsored by Lenny Rachitsky at NeuStar.
curl_easy_getinfo. It returns a pointer to a string with the most recently
used IP address. Modified test case 500 to also verify this feature. The
implementing of this feature was sponsored by Lenny Rachitsky at NeuStar.
and receive data over a connection previously setup with curl_easy_perform()
and its CURLOPT_CONNECT_ONLY option. The sendrecv.c example was added to
show how they can be used.
redirections and thus cannot use CURLOPT_FOLLOWLOCATION easily, we now
introduce the new CURLINFO_REDIRECT_URL option that lets applications
extract the URL libcurl would've redirected to if it had been told to. This
then enables the application to continue to that URL as it thinks is
suitable, without having to re-implement the magic of creating the new URL
from the Location: header etc. Test 1029 verifies it.
application to provide data for a multipart with the read callback. Note
that the size needs to be provided with CURLFORM_CONTENTSLENGTH when the
stream option is used. This feature is verified by the new test case
554. This feature was sponsored by Xponaut.
libcurl to seek in a given input stream. This is particularly important when
doing upload resumes when there's already a huge part of the file present
remotely. Before, and still if this callback isn't used, libcurl will read
and through away the entire file up to the point to where the resuming
begins (which of course can be a slow opereration depending on file size,
I/O bandwidth and more). This new function will also be preferred to get
used instead of the CURLOPT_IOCTLFUNCTION for seeking back in a stream when
doing multi-stage HTTP auth with POST/PUT.
code to instead introduce support for a new proxy type called
CURLPROXY_SOCKS5_HOSTNAME that is used to send the host name to the proxy
instead of IP address and there's thus no longer any need for a new
curl_easy_setopt() option.
The default SOCKS5 proxy is again back to sending the IP address to the
proxy. The new curl command line option for enabling sending host name to a
SOCKS5 proxy is now --socks5-hostname.
proxy do the host name resolving and only if --socks5ip (or
CURLOPT_SOCKS5_RESOLVE_LOCAL) is used we resolve the host name locally and
pass on the IP address only to the proxy.
is an inofficial PROXY4 variant that sends the hostname to the proxy instead
of the resolved address (which is already supported by SOCKS5). --socks4a is
the curl command line option for it and CURLOPT_PROXYTYPE can now be set to
CURLPROXY_SOCKS4A as well.
is no current timeout. It does not mean wait forever and it does not mean
do not wait at all. It means there is no timeout value known at this point in
time.
the appending of the "type=" thing on FTP URLs when they are passed to a
HTTP proxy. Some proxies just don't like that appending (which is done
unconditionally in 7.17.1), and some proxies treat binary/ascii transfers
better with the appending done!
CURLE_PEER_FAILED_VERIFICATION (standard CURL_NO_OLDIES style), and made this
return code get used by the previous SSH MD5 fingerprint check in case it
fails.
CURLOPT_SSH_HOST_PUBLIC_KEY_MD5 and the curl tool --hostpubmd5. They both make
the SCP or SFTP connection verify the remote host's md5 checksum of the public
key before doing a connect, to reduce the risk of a man-in-the-middle attack.
and allow reuse by multiple protocols. Several unused error codes were
removed. In all cases, macros were added to preserve source (and binary)
compatibility with the old names. These macros are subject to removal at
a future date, but probably not before 2009. An application can be
tested to see if it is using any obsolete code by compiling it with the
CURL_NO_OLDIES macro defined.
Documented some newer error codes in libcurl-error(3)
passed to it with curl_easy_setopt()! Previously it has always just refered
to the data, forcing the user to keep the data around until libcurl is done
with it. That is now history and libcurl will instead clone the given
strings and keep private copies.
and CURLOPT_NEW_DIRECTORY_PERMS. These control the premissions for files
and directories created on the remote server. CURLOPT_NEW_FILE_PERMS
defaults to 0644 and CURLOPT_NEW_DIRECTORY_PERMS defaults to 0755
because I just made SCP uploads return this value if the file size of
the upload file isn't given with CURLOPT_INFILESIZE*. Docs updated to
reflect this news, and a define for the old name was added to the public
header file.
function that deprecates the curl_multi_socket() function. Using the new
function the application tell libcurl what action that was found in the
socket that it passes in. This gives a significant performance boost as it
allows libcurl to avoid a call to poll()/select() for every call to
curl_multi_socket*().
to the debug callback.
- Shmulik Regev added CURLOPT_HTTP_CONTENT_DECODING and
CURLOPT_HTTP_TRANSFER_DECODING that if set to zero will disable libcurl's
internal decoding of content or transfer encoded content. This may be
preferable in cases where you use libcurl for proxy purposes or similar. The
command line tool got a --raw option to disable both at once.
and CURLOPT_CONNECTTIMEOUT_MS that, as their names should hint, do the
timeouts with millisecond resolution instead. The only restriction to that
is the alarm() (sometimes) used to abort name resolves as that uses full
seconds. I fixed the FTP response timeout part of the patch.
Internally we now count and keep the timeouts in milliseconds but it also
means we multiply set timeouts with 1000. The effect of this is that no
timeout can be set to more than 2^31 milliseconds (on 32 bit systems), which
equals 24.86 days. We probably couldn't before either since the code did
*1000 on the timeout values on several places already.
curl that uses the new CURLOPT_FTP_SSL_CCC option in libcurl. If enabled, it
will make libcurl shutdown SSL/TLS after the authentication is done on a
FTP-SSL operation.
no code present in the library that receives the option. Since it was not
possible to use, we know that no current users exist and thus we simply
removed it from the docs and made the code always use the default path of
the code.
case when 401 or 407 are returned, *IF* no auth credentials have been given.
The CURLOPT_FAILONERROR option is not possible to make fool-proof for 401
and 407 cases when auth credentials is given, but we've now covered this
somewhat more.
You might get some amounts of headers transferred before this situation is
detected, like for when a "100-continue" is received as a response to a
POST/PUT and a 401 or 407 is received immediately afterwards.
Added test 281 to verify this change.
and while doing so it became apparent that the current timeout system for
the socket API really was a bit awkward since it become quite some work to
be sure we have the correct timeout set.
Jeff then provided the new CURLMOPT_TIMERFUNCTION that is yet another
callback the app can set to get to know when the general timeout time
changes and thus for an application like hiperfifo.c it makes everything a
lot easier and nicer. There's a CURLMOPT_TIMERDATA option too of course in
good old libcurl tradition.
handle that is part of a multi handle first removes the handle from the
stack.
- Added CURLOPT_SSL_SESSIONID_CACHE and --no-sessionid to disable SSL
session-ID re-use on demand since there obviously are broken servers out
there that misbehave with session-IDs used.
CURLOPT_NOBODY is set true. PREQUOTE is then run roughly at the same place
in the command sequence as it would have run if there would've been a
transfer.
CURLOPT_MAX_RECV_SPEED_LARGE that limit tha maximum rate libcurl is allowed
to send or receive data. This kind of adds the the command line tool's
option --limit-rate to the library.
The rate limiting logic in the curl app is now removed and is instead
provided by libcurl itself. Transfer rate limiting will now also work for -d
and -F, which it didn't before.
autotools project, which optionally (default=yes) uses libcurl on a system
without a (usable) libcurl installation, but not specifying
`--without-libcurl', configure determines correctly that no libcurl is
available, however, the LIBCURL variable gets expanded to `LIBCURL = -lcurl'
in the resulting Makefiles.
David Shaw fixed the flaw.
type to the already provided type CURLPROXY_SOCKS4.
I added a --socks4 option that works like the current --socks5 option but
instead use the socks4 protocol.
an app can use to let libcurl only connect to a remote host and then extract
the socket from libcurl. libcurl will then not attempt to do any transfer at
all after the connect is done.
curl tool with --local-port. Plain and simply set the range of ports to bind
the local end of connections to. Implemented on to popular demand.
Not extensively tested. Please let me know how it works.
the latest features and protocols that libcurl supports and has a minor fix to
better deal with the obscure case where someone has more than one libcurl
installed at the same time.
into a counter, and thus you can now do multiple curl_global_init() and you
are then supposed to do the same amount of calls to curl_global_cleanup().
Bryan also updated the docs accordingly.
cleanups of this man page. The lengthy description has now also been removed
from curl/multi.h since it immediately got tedious to maintain the info on
two places when I did major updates...
(http://curl.haxx.se/bug/view.cgi?id=1338648) which really is more of a
feature request, but anyway. It pointed out that --max-redirs did not allow
it to be set to 0, which then would return an error code on the first
Location: found. Based on Nis' patch, now libcurl supports CURLOPT_MAXREDIRS
set to 0, or -1 for infinity. Added test case 274 to verify.
from the command line tool with --ignore-content-length. This will make it
easier to download files from Apache 1.x (and similar) servers that are
still having problems serving files larger than 2 or 4 GB. When this option
is enabled, curl will simply have to wait for the server to close the
connection to signal end of transfer. I wrote test case 269 that runs a
simple test that this works.
It now properly handles code that uses curl_free() (since not all versions of
curl have it), and also fixes a few problems when detecting libcurl on MinGW,
and a linker problem on OSX Panther.
1) findtool does look per tool in PATH and think ./perl is the perl
executable, while is just a local directory (I have . in the PATH)
2) I got several warning for head -1 deprecated in favour of head -n 1
3) ares directory is missing some file (missing is missing :-) ) because
automake and friends is not run.
(Let's hope number 2 doesn't break somewhere "out there", if so we can always
search/replace that back.)
that feature 64 bit 'long'.
Some systems have 64 bit time_t and deal with years beyond 2038. However, even
some of the systems with 64 bit time_t returns -1 for dates beyond 03:14:07
UTC, January 19, 2038. (Such as AIX 5100-06)
present in RFC959... so now (lib)curl supports it as well. --ftp-account and
CURLOPT_FTP_ACCOUNT set the account string. (The server may ask for an account
string after PASS have been sent away. The client responds with "ACCT [account
string]".) Added test case 228 and 229 to verify the functionality. Updated
the test FTP server to support ACCT somewhat.
(http://qa.mandrakesoft.com/show_bug.cgi?id=12285), when connecting to an
IPv6 host with FTP, --disable-epsv (or --disable-eprt) effectively disables
the ability to transfer a file. Now, when connected to an FTP server with
IPv6, these FTP commands can't be disabled even if asked to with the
available libcurl options.
