Daniel Stenberg
b55b780d7b
Cyrill Osterwalder pointed out that sending "" as data in a header is in
...
fact equal to a blank one according to the spec.
2006-01-27 15:01:10 +00:00
Daniel Stenberg
8d4eb2bc1f
updated source header
2006-01-26 10:39:25 +00:00
Daniel Stenberg
67bf4f28ff
Michal Marek provided a patch for FTP that makes libcurl continue to try PASV
...
even after EPSV returned a positive response code, if libcurl failed to
connect to the port number the EPSV response said. Obviously some people are
going through protocol-sensitive firewalls (or similar) that don't understand
EPSV and then they don't allow the second connection unless PASV was
used. This also called for a minor fix of test case 238.
2006-01-24 14:40:43 +00:00
Dan Fandrich
803582f8ac
Fixed some statements about handling multiple occurrences of options.
...
Tried to make some of the wording a bit more consistent.
2006-01-20 18:56:27 +00:00
Daniel Stenberg
03603f392a
the second -P fix
2006-01-20 17:50:12 +00:00
Daniel Stenberg
fcfd6d9504
Duane Cathey was one of our friends who reported that curl -P [IP]
...
(CURLOPT_FTPPORT) didn't work for ipv6-enabed curls if the IP wasn't a
"native" IP while it works fine for ipv6-disabled builds!
In the process of fixing this, I removed the support for LPRT since I can't
think of many reasons to keep doing it and asking on the mailing list didn't
reveal anyone else that could either. The code that sends EPRT and PORT is
now also a lot simpler than before (IMHO).
2006-01-19 23:52:03 +00:00
Daniel Stenberg
c31451cf13
Jon Turner pointed out that doing -P [hostname] with curl (built ipv4-only)
...
didn't work.
2006-01-19 22:02:46 +00:00
Daniel Stenberg
5deff1a179
clarify what "-P -" does
2006-01-19 20:40:08 +00:00
Daniel Stenberg
e236a1c99b
corrected factual mistake about BSD license in the krb4.c code
2006-01-19 09:53:33 +00:00
Daniel Stenberg
a2f3094eb0
reality sync
2006-01-18 12:17:20 +00:00
Daniel Stenberg
65afc576ea
configure no longer warns on "missing" if the current path contains a space
2006-01-18 10:00:36 +00:00
Daniel Stenberg
8971f656b4
David Shaw: Here is the latest libcurl.m4 autoconf tests. It is updated with
...
the latest features and protocols that libcurl supports and has a minor fix to
better deal with the obscure case where someone has more than one libcurl
installed at the same time.
2006-01-17 17:39:39 +00:00
Daniel Stenberg
394ce9ee39
happy new year!
2006-01-17 07:53:29 +00:00
Daniel Stenberg
67a83c1b34
David Shaw finally removed all traces of Gopher and we are now officially
...
not supporting it. It hasn't been functioning for years anyway, so this is
just finally stating what already was true. And a cleanup at the same time.
2006-01-16 22:14:37 +00:00
Daniel Stenberg
1e8d094274
improved the description of the -L/--location option
2006-01-16 00:00:28 +00:00
Daniel Stenberg
4c35a40858
Bryan Henderson turned the 'initialized' variable for curl_global_init()
...
into a counter, and thus you can now do multiple curl_global_init() and you
are then supposed to do the same amount of calls to curl_global_cleanup().
Bryan also updated the docs accordingly.
2006-01-15 23:55:53 +00:00
Daniel Stenberg
802b2aaf6a
adjusted to use curl_multi_setopt() to set the callback
2006-01-15 23:17:46 +00:00
Daniel Stenberg
0e79a8944b
adjusted to the new concept of the callback
2006-01-15 23:15:24 +00:00
Daniel Stenberg
bebf70667d
Andrew Benham fixed a race condition in the test suite that could cause the
...
test script to kill all processes in the current process group!
2006-01-13 12:16:16 +00:00
Daniel Stenberg
d9bd5de0b1
Fixed FTP_SKIP_PASV_IP and FTP_USE_EPSV to "do right" when used on FTP thru
...
HTTP proxy.
2006-01-12 22:18:38 +00:00
Daniel Stenberg
31c7aa0ba4
Michael Jahn fixed ftp over CONNECT
2006-01-12 12:40:04 +00:00
Daniel Stenberg
fc2388189f
mention the "secret" option as I've got no feedback and it is actually present
...
in 7.15.1
2006-01-10 23:08:38 +00:00
Daniel Stenberg
4431338691
When using a bad path over FTP, as in when libcurl couldn't CWD into all
...
given subdirs, libcurl would still "remember" the full path as if it is the
current directory libcurl is in so that the next curl_easy_perform() would
get really confused if it tried the same path again - as it would not issue
any CWD commands at all, assuming it is already in the "proper" dir.
Starting now, a failed CWD command sets a flag that prevents the path to be
"remembered" after returning.
2006-01-10 23:03:22 +00:00
Daniel Stenberg
bda1e9aeab
Made the copyright year match the latest modification's year.
2006-01-09 13:17:14 +00:00
Daniel Stenberg
4969ca768d
Alexander Lazic improved the getservbyport_r() configure check.
2006-01-09 08:31:48 +00:00
Daniel Stenberg
2acd1c1642
one more mirror, now fortunately in Japan
2006-01-08 23:28:33 +00:00
Daniel Stenberg
e1e753179a
use the proper dash
2006-01-08 22:55:13 +00:00
Daniel Stenberg
f4cc8153ae
Mike Jean fixed so that the second CONNECT when doing FTP over a HTTP proxy
...
actually used a new connection and not sent the second request on the first
socket!
2006-01-07 22:24:16 +00:00
Daniel Stenberg
e4d8cb4ee0
buildconf fixes
2006-01-06 22:59:34 +00:00
Daniel Stenberg
723a78ae3f
As Alexander Lazic pointed out, run the buildconf from the ares dir if that
...
is present instead of trying to duplicate that stuff in this script.
2006-01-06 22:08:39 +00:00
Daniel Stenberg
cd9d0d7dec
Use $ACLOCAL_FLAGS too, pointed out by Alexander Lazic
2006-01-06 22:07:51 +00:00
Daniel Stenberg
665d4f08c8
summary of what we have
2006-01-05 14:58:34 +00:00
Daniel Stenberg
00c7780fcb
James Bursa fixes: find the hosts file on RISC OS, and made it build with
...
newer gcc versions that no longer defines "riscos".
2006-01-05 07:57:32 +00:00
Daniel Stenberg
15ab13dc42
Yang Tse has been helping out
2006-01-05 07:56:43 +00:00
Daniel Stenberg
8a0ca3066e
modified output to prevent the autobuild system to trap on the 'FAILED' output
...
mistaking it for an actual failed test case
2006-01-04 23:02:40 +00:00
Gisle Vanem
ea01755bb4
Added ares_getsock.obj.
2006-01-04 14:21:57 +00:00
Daniel Stenberg
69c2084a18
updated test programs to use the API as it currently works
2006-01-04 14:11:35 +00:00
Daniel Stenberg
99c0a1a7d0
removed easy handle argument from proto
2006-01-04 14:09:57 +00:00
Daniel Stenberg
5acf997e69
upcoming new error code
2006-01-04 14:09:42 +00:00
Daniel Stenberg
dd87e4ed39
Andres Garcia made the TFTP test server build with mingw.
2006-01-04 10:07:36 +00:00
Daniel Stenberg
2f8c26ba8a
not much recent stuff, but still I had this modified locally
2006-01-04 10:04:23 +00:00
Daniel Stenberg
81b9793807
Added remake of the arpa/tftp.h file to make the TFTP server build on systems
...
without the real header file.
2006-01-03 22:47:07 +00:00
Daniel Stenberg
7278f17e8f
killed trailing whitespace
2006-01-03 22:44:58 +00:00
Daniel Stenberg
66c7427df0
Andres Garcia made the TFTP test server build with mingw ("I also had to copy
...
the 'tftp.h' file from a linux box, since it doesn't come with mingw.")
2006-01-03 22:19:15 +00:00
Daniel Stenberg
c1a06d858d
CURLOPT_PROGRESSFUNCTION is really not a good idea when using the multi
...
interface
2006-01-03 15:53:29 +00:00
Daniel Stenberg
53b5fdbe9e
fixed the prototype
2006-01-03 15:52:59 +00:00
Daniel Stenberg
687cf0235e
modified to hush compiler warnings
2006-01-03 12:18:22 +00:00
Daniel Stenberg
b6e9229cf0
Removed inaccurate comment for upcoming curl_multi_socket() and family.
...
Modified the callback proto used for it.
2006-01-02 23:37:48 +00:00
Daniel Stenberg
089e4848d8
minor edits
2006-01-02 23:32:36 +00:00
Daniel Stenberg
58d2e7c6d1
Initial description of the upcoming curl_multi_timeout() function
2006-01-02 23:00:04 +00:00
