include zstd curl patch for Makefile.m32 from vszakats
and include Add CMake support for zstd from Peter Wu
Helped-by: Viktor Szakats
Helped-by: Peter Wu
Closes#5453
* runtests.pl:
- Fix out-of-tree build under CMake when srcdir is not set. Default
srcdir to the location of runtests.pl.
- Add a hack to allow CMake to use the TFLAGS option as documented
in tests/README and used in scripts/travis/script.sh.
* Bump CMake version to 3.2 for USES_TERMINAL, dropping Debian Jessie
support (no one should care, it is already EOL.).
* Remove CTest since it defines its own 'test' target with no tests
since all unittests are already broken and not built by default.
* Add new test targets based on the options from Makefile.am. Since
new test targets are rarely added, I opted for duplicating the
runtests.pl options as opposed to creating a new Makefile.inc file.
Use top-level target names (test-x) instead of x-test since that is
used by CI and others.
Closes#5358
Remove many one second sleeps that were done *after* each newly started
test server already has been verified. They should not have any purpose
there.
Closes#5323
OpenSSH for Windows requires paths in the format of /C:/
instead of the pseudo-POSIX paths /cygdrive/c/ or just /c/
Reviewed-by: Daniel Stenberg
Closes#5298
As stunnel is an external tool and it has no specific option to export
the actually used port number when asked to listen to 0, runtests
instead iterates over ten randomly picked high number ports and sticks
to the first one stunnel can listen to.
Closes#5267
Since the http2 test server is a mere proxy that needs to know about the
dynamic port the HTTP server is using, it too needs to get restarted
when the http server is killed.
A regression caused by 80d6515.
Fixes#5289Closes#5291
The purpose with this variable is to provide a port number that is
reasonably likely to not have a listener on the local host so that tests
can try connect failures against it. It uses port 47 - "reserved"
according to IANA.
Updated six tests to use it instead of the previous different ports.
Assisted-by: Emil Engler
Closes#5270
FTP, IMAP, POP3, SMTP and their IPv6 versions are now all on dynamic
ports
Test 842-845 are unfortunately a bit hard to move over to this concept
right now and require "default port" still...
The runtests script now always performs variable replacement on the
entire test source file before the test gets executed, and saves the
updated version in a temporary file (log/test[num]) so that all test
case readers/servers can use that version (if present) and thus enjoy
the powers of test case variable substitution.
This is necessary to allow complete port number freedom.
Test 309 is updated to work with a non-fixed port number thanks to this.
- Implement new option CURLSSLOPT_REVOKE_BEST_EFFORT and
--ssl-revoke-best-effort to allow a "best effort" revocation check.
A best effort revocation check ignores errors that the revocation check
was unable to take place. The reasoning is described in detail below and
discussed further in the PR.
---
When running e.g. with Fiddler, the schannel backend fails with an
unhelpful error message:
Unknown error (0x80092012) - The revocation function was unable
to check revocation for the certificate.
Sadly, many enterprise users who are stuck behind MITM proxies suffer
the very same problem.
This has been discussed in plenty of issues:
https://github.com/curl/curl/issues/3727,
https://github.com/curl/curl/issues/264, for example.
In the latter, a Microsoft Edge developer even made the case that the
common behavior is to ignore issues when a certificate has no recorded
distribution point for revocation lists, or when the server is offline.
This is also known as "best effort" strategy and addresses the Fiddler
issue.
Unfortunately, this strategy was not chosen as the default for schannel
(and is therefore a backend-specific behavior: OpenSSL seems to happily
ignore the offline servers and missing distribution points).
To maintain backward-compatibility, we therefore add a new flag
(`CURLSSLOPT_REVOKE_BEST_EFFORT`) and a new option
(`--ssl-revoke-best-effort`) to select the new behavior.
Due to the many related issues Git for Windows and GitHub Desktop, the
plan is to make this behavior the default in these software packages.
The test 2070 was added to verify this behavior, adapted from 310.
Based-on-work-by: georgeok <giorgos.n.oikonomou@gmail.com>
Co-authored-by: Markus Olsson <j.markus.olsson@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Closes https://github.com/curl/curl/pull/4981
It is still possible to override the executable to run during the test,
using the <tool> tag, but this patch removes the requirement that the
tag must be present for unit tests.
It also removes the possibility of human error when existing test cases
are used as the basis for new tests, as recently witnessed in 81c37124.
Reviewed-by: Daniel Stenberg
Closes#4976
When using randomized features of runtests (-R and --shallow) it is
useful to have a fixed random seed to make sure for example extra
commits in a branch or a rebase won't change the seed that would make
repeated runs work differently.
As it is also useful to change seed sometimes, the default seed is now
determined based on the current month (and first line curl -V
output). When the month changes, so will the random seed.
The specific seed is also shown in the standard test suite top header
and it can be set explictly with the new --seed=[num] option so that the
exact order of a previous run can be achieved.
Closes#4734
When set, shallow mode limits runtests -t to make no more than NUM fails
per test case. If more are found, it will randomly discard entries until
the number is right. The random seed can also be set.
This is particularly useful when running MANY tests as then most torture
failures will already fail the same functions over and over and make the
total operation painfully tedious.
Closes#4699
This enables the use of Windows Subsystem for Linux (WSL) to run the
testsuite against Windows binaries while using Linux servers.
This commit introduces the following environment variables:
- CURL_TEST_EXE_EXT: set the executable extension for all components
- CURL_TEST_EXE_EXT_TOOL: set it for the curl tool only
- CURL_TEST_EXE_EXT_SSH: set it for the SSH tools only
Later testcurl.pl could be adjusted to make use of those variables.
- CURL_TEST_EXE_EXT_SRV: set it for the test servers only
(This is one of several commits to support use of WSL for the tests.)
Closes https://github.com/curl/curl/pull/3899
Bash in Windows Subsystem for Linux (WSL) requires it for some reason.
(This is one of several commits to support use of WSL for the tests.)
Ref: https://github.com/curl/curl/pull/3899
The MSYS system on Windows can run the test suite for curl built with
any toolset. When built with the MSYS GCC, curl uses Unix line endings,
while it uses Windows line endings when built with the MinGW GCC, and
`^O` reports 'msys' in both cases. Use the curl executable itself to
determine the line endings instead, which reports 'x86_64-pc-msys' when
built with the MSYS GCC.
Closes https://github.com/curl/curl/pull/4506
smbserver.py/dictserver.py were explicitly using localhost/127.0.0.1 for
binding the server which when we were running the tests with a separate
HOSTIP and CLIENTIP had failures verifying the server from the device we
were testing.
This changes them to take the address from runtests.py and default to
localhost/127.0.0.1 if none is given.
Closes#4048
Make '-k' a no-op. The singletest function now clears the log directory
BEFORE each individual test and not after, which makes it possible to
always keep the logfiles around after a test has been run. No need to
specify -k anymore. Keeping the option parsing around to work with users
of old habits.
Some tests also didn't work properly when -k was used (since the old
logs would be kep when a new test starts) which this change also fixes.
Closes#4035
... so that runtests can skip individual test cases that test features
that are explicitly disabled in this build. This new logic is intended
for disabled features that aren't otherwise easily visible through the
curl_version_info() or other API calls.
tests/server/disabled is a newly built executable that will output a
list of disabled features. Outputs nothing for a default build.
Closes#3950
Remove support for, references to and use of "cyaSSL" from the source
and docs. wolfSSL is the current name and there's no point in keeping
references to ancient history.
Assisted-by: Daniel Gustafsson
Closes#3903
The code is more or less copied from the stdout comparison code, maybe
some better reuse is possible.
test 1457 is adjusted to make the output actually match (by using --silent)
test 506 used <stderr> without actually needing it, so that <stderr> block is removed
Closes#3536
The function identifying a leading "scheme" part of the URL considered a
few letters ending with a colon to be a scheme, making something like
"short:80" to become an unknown scheme instead of a short host name and
a port number.
Extended test 1560 to verify.
Also fixed test203 to use file_pwd to make it get the correct path on
windows. Removed test 2070 since it was a duplicate of 203.
Assisted-by: Marcel Raad
Reported-by: Hagai Auro
Fixes#3220Fixes#3233Closes#3223Closes#3235
As has been outlined in the DEPRECATE.md document, the axTLS code has
been disabled for 6 months and is hereby removed.
Use a better supported TLS library!
Assisted-by: Daniel Gustafsson
Closes#3194
The LD_PRELOAD functionality doesn't exist on macOS, so skip any tests
requiring it.
Fixes#2394Closes#3106
Reported-by: Github user @jakirkham
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
runtests.pl support running a range of tests, like "44 to 127". Starting
now, the code makes sure that even such given ranges will ignore tests
that are marked as disabled.
Disabled tests can still be run by explictly specifying that test
number.
Closes#3075
Transparently. The related curl_multi_setopt() options all still returns
OK when pipelining is selected.
To re-enable the support, the single line change in lib/multi.c needs to
be reverted.
See docs/DEPRECATE.md
Closes#2705
All these tests failed on Windows because something like
sftp://%HOSTIP:%SSHPORT%PWD/
expanded to
sftp://127.0.0.1:1234c:/msys64/home/bla/curl
and then curl complained about the port number ending with a letter.
Use the original POSIX path instead of the Windows path created in
checksystem to fix this.
Closes https://github.com/curl/curl/pull/2920
Deal with tiny "HTTP/0.9" (header-less) responses by checking the
status-line early, even before a full "HTTP/" is received to allow
detecting 0.9 properly.
Test 1266 and 1267 added to verify.
Fixes#2420Closes#2872
... and make test 1026 rely on that feature so that --disable-manual
builds don't cause test failures.
Reported-by: Max Dymond and Anders Roxell
Fixes#2533Closes#2540
Get screen width from the environment variable COLUMNS first, if set. If
not, use ioctl(). If nether works, assume 79.
Closes#2242
The "refresh" is for the -# output when no total transfer size is
known. It will now only use a single updated line even for this case:
The "-=O=-" ship moves when data is transferred. The four flying
"hashes" move (on a sine wave) on each refresh, independent of data.
This uses the brotli external library (https://github.com/google/brotli).
Brotli becomes a feature: additional curl_version_info() bit and
structure fields are provided for it and CURLVERSION_NOW bumped.
Tests 314 and 315 check Brotli content unencoding with correct and
erroneous data.
Some tests are updated to accomodate with the now configuration dependent
parameters of the Accept-Encoding header.
The stub implementation is pre-loaded using LD_PRELOAD
and emulates common gssapi uses (only builds if curl is
initially built with gssapi support).
The initial tests are currently disabled for debug builds
as LD_PRELOAD is not used then.
Ref: https://github.com/curl/curl/pull/1687
