It is allowed to call that function with id set to -1, specifying the
backend by the name instead. We should imitate what is done further down
in that function to allow for that.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Closes#3346
NSS may be built without support for the latest SSL/TLS versions,
leading to "SSL version range is not valid" errors when the library
code supports a recent version (e.g. TLS v1.3) but it has explicitly
been disabled.
This change adjusts the maximum SSL version requested by libcurl to
be the maximum supported version at runtime, as long as that version
is at least as high as the minimum version required by libcurl.
Fixes#3261
The function does not return the same value as snprintf() normally does,
so readers may be mislead into thinking the code works differently than
it actually does. A different function name makes this easier to detect.
Reported-by: Tomas Hoger
Assisted-by: Daniel Gustafsson
Fixes#3296Closes#3297
Session resumption information is not available immediately after a TLS 1.3
handshake. The client must wait until the server has sent a session ticket.
Use OpenSSL's "new session" callback to get the session information and put it
into curl's session cache. For TLS 1.3 sessions, this callback will be invoked
after the server has sent a session ticket.
The "new session" callback is invoked only if OpenSSL's session cache is
enabled, so enable it and use the "external storage" mode which lets curl manage
the contents of the session cache.
A pointer to the connection data and the sockindex are now saved as "SSL extra
data" to make them available to the callback.
This approach also works for old SSL/TLS versions and old OpenSSL versions.
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Fixes#3202Closes#3271
Since we're close to feature freeze, this change disables this feature
with an #ifdef. Define ALLOW_RENEG at build-time to enable.
This could be converted to a bit for CURLOPT_SSL_OPTIONS to let
applications opt-in this.
Concern-raised-by: David Benjamin
Fixes#3283Closes#3293
The SSL_CTX_set_msg_callback callback is not just called for the
Handshake or Alert protocols, but also for the raw record header
(SSL3_RT_HEADER) and the decrypted inner record type
(SSL3_RT_INNER_CONTENT_TYPE). Be sure to ignore the latter to avoid
excess debug spam when using `curl -v` against a TLSv1.3-enabled server:
* TLSv1.3 (IN), TLS app data, [no content] (0):
(Following this message, another callback for the decrypted
handshake/alert messages will be be present anyway.)
Closes https://github.com/curl/curl/pull/3281
The productname from Microsoft is "Schannel", but in infof/failf
reporting we use "schannel". This removes different versions.
Closes#3243
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
As has been outlined in the DEPRECATE.md document, the axTLS code has
been disabled for 6 months and is hereby removed.
Use a better supported TLS library!
Assisted-by: Daniel Gustafsson
Closes#3194
Curl_verify_certificate() must use the Curl_ prefix since it is globally
available in the lib and otherwise steps outside of our namespace!
Closes#3201
MesaLink support was added in commit 57348eb97d but the
backend was never added to the curl_sslbackend enum in curl/curl.h.
This adds the new backend to the enum and updates the relevant docs.
Closes#3195
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
When failing to set the 1.3 cipher suite, the wrong string pointer would
be used in the error message. Most often saying "(nil)".
Reported-by: Ricky-Tigg on github
Fixes#3178Closes#3180
In case a very small buffer was passed to the version function, it could
result in the buffer not being NULL-terminated since strncpy() doesn't
guarantee a terminator on an overflowed buffer. Rather than adding code
to terminate (and handle zero-sized buffers), move to using snprintf()
instead like all the other vtls backends.
Closes#3105
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Reviewed-by: Viktor Szakats <commit@vszakats.net>
The result of a memory allocation should always be checked, as we may
run under memory pressure where even a small allocation can fail. This
adds checking and error handling to a few cases where the allocation
wasn't checked for success. In the ftp case, the freeing of the path
variable is moved ahead of the allocation since there is little point
in keeping it around across the strdup, and the separation makes for
more readable code. In nwlib, the lock is aslo freed in the error path.
Also bumps the copyright years on affected files.
Closes#3084
Reviewed-by: Jay Satiro <raysatiro@yahoo.com>
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
- replace tabs with spaces where possible
- remove line ending spaces
- remove double/triple newlines at EOF
- fix a non-UTF-8 character
- cleanup a few indentations/line continuations
in manual examples
Closes https://github.com/curl/curl/pull/3037
- Treat CURL_SSLVERSION_MAX_NONE the same as
CURL_SSLVERSION_MAX_DEFAULT. Prior to this change NONE would mean use
the minimum version also as the maximum.
This is a follow-up to 6015cef which changed the behavior of setting
the SSL version so that the requested version would only be the minimum
and not the maximum. It appears it was (mostly) implemented in OpenSSL
but not other backends. In other words CURL_SSLVERSION_TLSv1_0 used to
mean use just TLS v1.0 and now it means use TLS v1.0 *or later*.
- Fix CURL_SSLVERSION_MAX_DEFAULT for OpenSSL.
Prior to this change CURL_SSLVERSION_MAX_DEFAULT with OpenSSL was
erroneously treated as always TLS 1.3, and would cause an error if
OpenSSL was built without TLS 1.3 support.
Co-authored-by: Daniel Gustafsson
Fixes https://github.com/curl/curl/issues/2969
Closes https://github.com/curl/curl/pull/3012
The reallocation was using the input pointer for the return value, which
leads to a memory leak on reallication failure. Fix by instead use the
safe internal API call Curl_saferealloc().
Closes#3005
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Reviewed-by: Nick Zitzmann <nickzman@gmail.com>
Strings broken on multiple rows in the .c file need to have appropriate
whitespace padding on either side of the concatenation point to render
a correct amalgamated string. Fix by adding a space at the occurrences
found.
Closes#2986
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
- Use memcpy instead of strncpy to copy a string without termination,
since gcc8 warns about using strncpy to copy as many bytes from a
string as its length.
Suggested-by: Viktor Szakats
Closes https://github.com/curl/curl/issues/2980
Sometimes it may be considered a security risk to load an external
OpenSSL configuration automatically inside curl_global_init(). The
configuration option --disable-ssl-auto-load-config disables this
automatism. The Windows build scripts winbuild/Makefile.vs provide a
corresponding option ENABLE_SSL_AUTO_LOAD_CONFIG accepting a boolean
value.
Setting neither of these options corresponds to the previous behavior
loading the external OpenSSL configuration automatically.
Fixes#2724Closes#2791
SEC_E_APPLICATION_PROTOCOL_MISMATCH isn't defined in some versions of
mingw and would require an ifdef otherwise.
Reported-by: Thomas Glanzmann
Approved-by: Marc Hörsken
Bug: https://curl.haxx.se/mail/lib-2018-09/0020.htmlCloses#2950
1) Using CERT_STORE_OPEN_EXISTING_FLAG ( or CERT_STORE_READONLY_FLAG )
while opening certificate store would be sufficient in this scenario and
less-demanding in sense of required user credentials ( for example,
IIS_IUSRS will get "Access Denied" 0x05 error for existing CertOpenStore
call without any of flags mentioned above ),
2) as 'cert_store_name' is a DWORD, attempt to format its value like a
string ( in "Failed to open cert store" error message ) will throw null
pointer exception
3) adding GetLastError(), in my opinion, will make error message more
useful.
Bug: https://curl.haxx.se/mail/lib-2018-08/0198.htmlCloses#2909
This allows the use of PKCS#11 URI for certificates and keys without
setting the corresponding type as "ENG" and the engine as "pkcs11"
explicitly. If a PKCS#11 URI is provided for certificate, key,
proxy_certificate or proxy_key, the corresponding type is set as "ENG"
if not provided and the engine is set to "pkcs11" if not provided.
Acked-by: Nikos Mavrogiannopoulos
Closes#2333
RNG structure must be freed by call to FreeRng after its use in
Curl_cyassl_random. This call fixes Valgrind failures when running the
test suite with wolfSSL.
Closes#2784
Commit 38203f1585 changed engine detection to be version-based,
with a baseline of openssl 1.0.1. This does in fact break builds
with openssl 1.0.0, which has engine support - the configure script
detects that ENGINE_cleanup() is available - but <openssl/engine.h>
doesn't get included to declare it.
According to upstream documentation, engine support was added to
mainstream openssl builds as of version 0.9.7:
https://github.com/openssl/openssl/blob/master/README.ENGINE
This commit drops the version test down to 1.0.0 as version 1.0.0d
is the oldest version I have to test with.
Closes#2732
MinGW warns:
/lib/vtls/schannel.c:219:64: warning: signed and unsigned type in
conditional expression [-Wsign-compare]
Fix this by casting the ptrdiff_t to size_t as we know it's positive.
Closes https://github.com/curl/curl/pull/2721
The code treated the set version as the *exact* version to require in
the TLS handshake, which is not what other TLS backends do and probably
not what most people expect either.
Reported-by: Andreas Olsson
Assisted-by: Gaurav Malhotra
Fixes#2691Closes#2694
with clang-6.0:
```
vtls/schannel_verify.c: In function 'add_certs_to_store':
vtls/schannel_verify.c:212:30: warning: passing argument 11 of 'CryptQueryObject' from incompatible pointer type [-Wincompatible-pointer-types]
&cert_context)) {
^
In file included from /usr/share/mingw-w64/include/schannel.h:10:0,
from /usr/share/mingw-w64/include/schnlsp.h:9,
from vtls/schannel.h:29,
from vtls/schannel_verify.c:40:
/usr/share/mingw-w64/include/wincrypt.h:4437:26: note: expected 'const void **' but argument is of type 'CERT_CONTEXT ** {aka struct _CERT_CONTEXT **}'
WINIMPM WINBOOL WINAPI CryptQueryObject (DWORD dwObjectType, const void *pvObject, DWORD dwExpectedContentTypeFlags, DWORD dwExpectedFormatTypeFlags, DWORD dwFlags,
^~~~~~~~~~~~~~~~
```
Ref: https://msdn.microsoft.com/library/windows/desktop/aa380264
Closes https://github.com/curl/curl/pull/2648
Given the contstraints of SChannel, I'm exposing these as the algorithms
themselves instead; while replicating the ciphersuite as specified by
OpenSSL would have been preferable, I found no way in the SChannel API
to do so.
To use this from the commandline, you need to pass the names of contants
defining the desired algorithms. For example, curl --ciphers
"CALG_SHA1:CALG_RSA_SIGN:CALG_RSA_KEYX:CALG_AES_128:CALG_DH_EPHEM"
https://github.com The specific names come from wincrypt.h
Closes#2630
Previously it was checked for in configure/cmake, but that would then
leave other build systems built without engine support.
While engine support probably existed prior to 1.0.1, I decided to play
safe. If someone experience a problem with this, we can widen the
version check.
Fixes#2641Closes#2644
URL: https://curl.haxx.se/mail/lib-2018-06/0000.html
This is step one. It adds #error statements that require source edits to
make curl build again if asked to use axTLS. At a later stage we might
remove the axTLS specific code completely.
Closes#2628
Adds CURLOPT_TLS13_CIPHERS and CURLOPT_PROXY_TLS13_CIPHERS.
curl: added --tls13-ciphers and --proxy-tls13-ciphers
Fixes#2435
Reported-by: zzq1015 on github
Closes#2607
OpenSSL has supported --cacert for ages, always accepting LF-only line
endings ("Unix line endings") as well as CR/LF line endings ("Windows
line endings").
When we introduced support for --cacert also with Secure Channel (or in
cURL speak: "WinSSL"), we did not take care to support CR/LF line
endings, too, even if we are much more likely to receive input in that
form when using Windows.
Let's fix that.
Happily, CryptQueryObject(), the function we use to parse the ca-bundle,
accepts CR/LF input already, and the trailing LF before the END
CERTIFICATE marker catches naturally any CR/LF line ending, too. So all
we need to care about is the BEGIN CERTIFICATE marker. We do not
actually need to verify here that the line ending is CR/LF. Just
checking for a CR or an LF is really plenty enough.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Closes https://github.com/curl/curl/pull/2592
Original MinGW targets Windows 2000 by default, which lacks some APIs and
definitions for this feature. Disable it if these APIs are not available.
Closes https://github.com/curl/curl/pull/2522
To make builds with VS2015 work. Recent changes in VS2015 _IOB_ENTRIES
handling is causing problems. This fix changes the OpenSSL backend code
to use BIO functions instead of FILE I/O functions to circumvent those
problems.
Closes#2512
... instead of previous separate struct fields, to make it easier to
extend and change individual backends without having to modify them all.
closes#2547
This extends the INDENTATION case to also handle 'else' statements
and require proper indentation on the following line. Also fixes the
offending cases found in the codebase.
Closes#2532
Curl_cert_hostcheck operates with the host character set, therefore the
ASCII subjectAltName string retrieved with OpenSSL must be converted to
the host encoding before comparison.
Closes#2493
- Move verify_certificate functionality in schannel.c into a new
file called schannel_verify.c. Additionally, some structure defintions
from schannel.c have been moved to schannel.h to allow them to be
used in schannel_verify.c.
- Make verify_certificate functionality for Schannel available on
all versions of Windows instead of just Windows CE. verify_certificate
will be invoked on Windows CE or when the user specifies
CURLOPT_CAINFO and CURLOPT_SSL_VERIFYPEER.
- In verify_certificate, create a custom certificate chain engine that
exclusively trusts the certificate store backed by the CURLOPT_CAINFO
file.
- doc updates of --cacert/CAINFO support for schannel
- Use CERT_NAME_SEARCH_ALL_NAMES_FLAG when invoking CertGetNameString
when available. This implements a TODO in schannel.c to improve
handling of multiple SANs in a certificate. In particular, all SANs
will now be searched instead of just the first name.
- Update tool_operate.c to not search for the curl-ca-bundle.crt file
when using Schannel to maintain backward compatibility. Previously,
any curl-ca-bundle.crt file found in that search would have been
ignored by Schannel. But, with CAINFO support, the file found by
that search would have been used as the certificate store and
could cause issues for any users that have curl-ca-bundle.crt in
the search path.
- Update url.c to not set the build time CURL_CA_BUNDLE if the selected
SSL backend is Schannel. We allow setting CA location for schannel
only when explicitly specified by the user via CURLOPT_CAINFO /
--cacert.
- Add new test cases 3000 and 3001. These test cases check that the first
and last SAN, respectively, matches the connection hostname. New test
certificates have been added for these cases. For 3000, the certificate
prefix is Server-localhost-firstSAN and for 3001, the certificate
prefix is Server-localhost-secondSAN.
- Remove TODO 15.2 (Add support for custom server certificate
validation), this commit addresses it.
Closes https://github.com/curl/curl/pull/1325
- Fix warning 'integer from pointer without a cast' on 3rd arg in
CertOpenStore. The arg type HCRYPTPROV may be a pointer or integer
type of the same size.
Follow-up to e35b025.
Caught by Marc's CI builds.
Users can now specify a client certificate in system certificates store
explicitly using expression like `--cert "CurrentUser\MY\<thumbprint>"`
Closes#2376
When a zeroed out allocation is required, use calloc() rather than
malloc() followed by an explicit memset(). The result will be the
same, but using calloc() everywhere increases consistency in the
codebase and avoids the risk of subtle bugs when code is injected
between malloc and memset by accident.
Closes https://github.com/curl/curl/pull/2497
unit1309 and vtls/gtls: error: arithmetic on a null pointer treated as a
cast from integer to pointer is a GNU extension
Reported-by: Rikard Falkeborn
Fixes#2466Closes#2468
This reverts commit dc85437736.
libcurl (with the OpenSSL backend) performs server certificate verification
even if verifypeer == 0 and the verification result is available using
CURLINFO_SSL_VERIFYRESULT. The commit that is being reverted caused the
CURLINFO_SSL_VERIFYRESULT to not have useful information for the
verifypeer == 0 use case (it would always have
X509_V_ERR_UNABLE_TO_GET_ISSUER_CERT_LOCALLY).
Closes#2451
When targeting x64, MinGW-w64 complains about conversions between
32-bit long and 64-bit pointers. Fix this by reusing the
GNUTLS_POINTER_TO_SOCKET_CAST / GNUTLS_SOCKET_TO_POINTER_CAST logic
from gtls.c, moving it to warnless.h as CURLX_POINTER_TO_INTEGER_CAST /
CURLX_INTEGER_TO_POINTER_CAST.
Closes https://github.com/curl/curl/pull/2341
When peer verification is disabled, calling
SSL_CTX_load_verify_locations is not necessary. Only call it when
verification is enabled to save resources and increase performance.
Closes#2290
Follow-up to 84fcaa2e7. libressl does not have the API even if it says it is
late OpenSSL version...
Fixes#2246Closes#2247
Reported-by: jungle-boogie on github
Fixed undefined symbol of getenv() which does not exist when compiling
for Windows 10 App (CURL_WINDOWS_APP). Replaced getenv() with
curl_getenv() which is aware of getenv() absence when CURL_WINDOWS_APP
is defined.
Closes#2171
Prior to this change SSLKEYLOGFILE used line buffering on WIN32 just
like it does for other platforms. However, the Windows CRT does not
actually support line buffering (_IOLBF) and will use full buffering
(_IOFBF) instead. We can't use full buffering because multiple processes
may be writing to the file and that could lead to corruption, and since
full buffering is the only buffering available this commit disables
buffering for Windows SSLKEYLOGFILE entirely (_IONBF).
Ref: https://github.com/curl/curl/pull/1346#issuecomment-350530901
- Allow proxy_ssl to be checked for pending data even when connssl does
not yet have an SSL handle.
This change is for posterity. Currently there doesn't seem to be a code
path that will cause a pending data check when proxyssl could have
pending data and the connssl handle doesn't yet exist [1].
[1]: Recall that an https proxy connection starts out in connssl but if
the destination is also https then the proxy SSL backend data is moved
from connssl to proxyssl, which means connssl handle is temporarily
empty until an SSL handle for the destination can be created.
Ref: https://github.com/curl/curl/commit/f4a6238#commitcomment-24396542
Closes https://github.com/curl/curl/pull/1916
commit d3ab7c5a21 broke the boringssl build since it doesn't have
RSA_flags(), so we disable that code block for boringssl builds.
Reported-by: W. Mark Kubacki
Fixes#2117
... since the 'tv' stood for timeval and this function does not return a
timeval struct anymore.
Also, cleaned up the Curl_timediff*() functions to avoid typecasts and
clean up the descriptive comments.
Closes#2011
... to cater for systems with unsigned time_t variables.
- Renamed the functions to curlx_timediff and Curl_timediff_us.
- Added overflow protection for both of them in either direction for
both 32 bit and 64 bit time_ts
- Reprefixed the curlx_time functions to use Curl_*
Reported-by: Peter Piekarski
Fixes#2004Closes#2005
Those were temporary things we'd add and remove for our own convenience
long ago. The last few stayed around for too long as an oversight but
have since been removed. These days we have a running
BORINGSSL_API_VERSION counter which is bumped when we find it
convenient, but 2015-11-19 was quite some time ago, so just check
OPENSSL_IS_BORINGSSL.
Closes#1979
Compare these settings in Curl_ssl_config_matches():
- verifystatus (CURLOPT_SSL_VERIFYSTATUS)
- random_file (CURLOPT_RANDOM_FILE)
- egdsocket (CURLOPT_EGDSOCKET)
Also copy the setting "verifystatus" in Curl_clone_primary_ssl_config(),
and copy the setting "sessionid" unconditionally.
This means that reusing connections that are secured with a client
certificate is now possible, and the statement "TLS session resumption
is disabled when a client certificate is used" in the old advisory at
https://curl.haxx.se/docs/adv_20170419.html is obsolete.
Reviewed-by: Daniel Stenberg
Closes#1917
.. and include the core NTLM header in all NTLM-related source files.
Follow up to 6f86022. Since then http_ntlm checks NTLM_NEEDS_NSS_INIT
but did not include vtls.h where it was defined.
Closes https://github.com/curl/curl/pull/1911
With the recently introduced MultiSSL support multiple SSL backends
can be compiled into cURL That means that now the order of the SSL
One option would be to use the same SSL backend as was configured
via `curl_global_sslset()`, however, NTLMv2 support would appear
to be available only with some SSL backends. For example, when
eb88d778e (ntlm: Use Windows Crypt API, 2014-12-02) introduced
support for NTLMv1 using Windows' Crypt API, it specifically did
*not* introduce NTLMv2 support using Crypt API at the same time.
So let's select one specific SSL backend for NTLM support when
compiled with multiple SSL backends, using a priority order such
that we support NTLMv2 even if only one compiled-in SSL backend can
be used for that.
Ref: https://github.com/curl/curl/pull/1848
In some cases the RSA key does not support verifying it because it's
located on a smart card, an engine wants to hide it, ...
Check the flags on the key before trying to verify it.
OpenSSL does the same thing internally; see ssl/ssl_rsa.c
Closes#1904
lib/vtls/openssl.c uses OpenSSL APIs from BUF_MEM and BIO APIs. Include
their headers directly rather than relying on other OpenSSL headers
including things.
Closes https://github.com/curl/curl/pull/1891
Another mistake in my manual fixups of the largely mechanical
search-and-replace ("connssl->" -> "BACKEND->"), just like the previous
commit concerning HTTPS proxies (and hence not caught during my
earlier testing).
Fixes#1855Closes#1871
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
