Attempt to unpause a busy read in the CURLOPT_XFERINFOFUNCTION.
When uploading from stdin in non-blocking mode, a delay in reading
the stream (EAGAIN) causes curl to pause sending data
(CURL_READFUNC_PAUSE). Prior to this change, a busy read was
detected and unpaused only in the CURLOPT_WRITEFUNCTION handler.
This change performs the same busy read handling in a
CURLOPT_XFERINFOFUNCTION handler.
Fixes#2051Closes#4599
Reported-by: bdry on github
Starting with this change when doing parallel transfers, without this
option set, curl will prefer to create new transfers multiplexed on an
existing connection rather than creating a brand new one.
--parallel-immediate can be set to tell curl to prefer to use new
connections rather than to wait and try to multiplex.
libcurl-wise, this means that curl will set CURLOPT_PIPEWAIT by default
on parallel transfers.
Suggested-by: Tom van der Woerdt
Closes#4500
Regression from e59371a493 (7.67.0)
Added test 490, 491 and 492 to verify the functionality.
Reported-by: Kamil Dudka
Reported-by: Anderson Sasaki
Fixes#4588Closes#4591
- If server header Retry-After is being used for retry sleep time then
show that value to the user instead of the normal retry sleep time.
This is a follow-up to 640b973 (7.66.0) which changed curl tool so that
the value from Retry-After header overrides other retry timing options.
Closes https://github.com/curl/curl/pull/4498
This should again enable crazy-large download ranges of the style
[1-10000000] that otherwise easily ran out of memory starting in 7.66.0
when this new handle allocating scheme was introduced.
Reported-by: Peter Sumatra
Fixes#4393Closes#4438
When looping around the ranges and given URLs to create transfers, all
errors should exit the loop and return. Previously it would keep
looping.
Reported-by: SumatraPeter on github
Bug: #4393Closes#4396
This commit fixes a regression introduced by curl-7_65_3-5-gb88940850.
Detected by tests 2005, 2008, 2009, 2010, 2011, and 2012 with valgrind
and libmetalink enabled.
Closes#4326
Even though it cannot fall-back to a lower HTTP version automatically. The
safer way to upgrade remains via CURLOPT_ALTSVC.
CURLOPT_H3 no longer has any bits that do anything and might be removed
before we remove the experimental label.
Updated the curl tool accordingly to use "--http3".
Closes#4197
Repeatedly we see problems where using curl_multi_wait() is difficult or
just awkward because if it has no file descriptor to wait for
internally, it returns immediately and leaves it to the caller to wait
for a small amount of time in order to avoid occasional busy-looping.
This is often missed or misunderstood, leading to underperforming
applications.
This change introduces curl_multi_poll() as a replacement drop-in
function that accepts the exact same set of arguments. This function
works identically to curl_multi_wait() - EXCEPT - for the case when
there's nothing to wait for internally, as then this function will by
itself wait for a "suitable" short time before it returns. This
effectiely avoids all risks of busy-looping and should also make it less
likely that apps "over-wait".
This also changes the curl tool to use this funtion internally when
doing parallel transfers and changes curl_easy_perform() to use it
internally.
Closes#4163
USe configure --with-ngtcp2 or --with-quiche
Using either option will enable a HTTP3 build.
Co-authored-by: Alessandro Ghedini <alessandro@ghedini.me>
Closes#3500
This is done by making sure each individual transfer is first added to a
linked list as then they can be performed serially, or at will, in
parallel.
Closes#3804
- Revert all commits related to the SASL authzid feature since the next
release will be a patch release, 7.65.1.
Prior to this change CURLOPT_SASL_AUTHZID / --sasl-authzid was destined
for the next release, assuming it would be a feature release 7.66.0.
However instead the next release will be a patch release, 7.65.1 and
will not contain any new features.
After the patch release after the reverted commits can be restored by
using cherry-pick:
git cherry-pick a14d72ca9499ff8c1cc36c2a8d520edf690
Details for all reverted commits:
Revert "os400: take care of CURLOPT_SASL_AUTHZID in curl_easy_setopt_ccsid()."
This reverts commit 0edf6907ae.
Revert "tests: Fix the line endings for the SASL alt-auth tests"
This reverts commit c2a8d52a13.
Revert "examples: Added SASL PLAIN authorisation identity (authzid) examples"
This reverts commit 8c1cc369d0.
Revert "curl: --sasl-authzid added to support CURLOPT_SASL_AUTHZID from the tool"
This reverts commit a9499ff136.
Revert "sasl: Implement SASL authorisation identity via CURLOPT_SASL_AUTHZID"
This reverts commit a14d72ca2f.
They serve very little purpose and mostly just add noise. Most of them
have been around for a very long time. I read them all before removing
or rephrasing them.
Ref: #3876Closes#3883
... since libcurl has started to be totally unaware of options for
disabled protocols they now return error.
Bug: c9c5304dd4 (commitcomment-33533937)
Reported-by: Marcel Raad
Closes#3886
Use long for CURLOPT_HTTP09_ALLOWED to fix the following warning:
tool_operate.c: In function 'operate_do':
../include/curl/typecheck-gcc.h:47:9: error: call to
'_curl_easy_setopt_err_long' declared with attribute warning:
curl_easy_setopt expects a long argument for this option [-Werror]
Closes https://github.com/curl/curl/pull/3534
Stick to "Schannel" everywhere. The configure option --with-winssl is
kept to allow existing builds to work but --with-schannel is added as an
alias.
Closes#3504
Added CURLOPT_HTTP09_ALLOWED and --http0.9 for this purpose.
For now, both the tool and library allow HTTP/0.9 by default.
docs/DEPRECATE.md lays out the plan for when to reverse that default: 6
months after the 7.64.0 release. The options are added already now so
that applications/scripts can start using them already now.
Fixes#2873Closes#3383
The tool's local port command line range parser didn't check for integer
overflows and could pass "weird" data to libcurl for this option.
libcurl however, has a strict range check for the values so it rejects
anything outside of the accepted range.
Reported-by: Brian Carpenter
Closes#3242
This allows the use of PKCS#11 URI for certificates and keys without
setting the corresponding type as "ENG" and the engine as "pkcs11"
explicitly. If a PKCS#11 URI is provided for certificate, key,
proxy_certificate or proxy_key, the corresponding type is set as "ENG"
if not provided and the engine is set to "pkcs11" if not provided.
Acked-by: Nikos Mavrogiannopoulos
Closes#2333
Adds CURLOPT_TLS13_CIPHERS and CURLOPT_PROXY_TLS13_CIPHERS.
curl: added --tls13-ciphers and --proxy-tls13-ciphers
Fixes#2435
Reported-by: zzq1015 on github
Closes#2607
The feature is only enabled if the output is believed to be a tty.
-J: There's some minor differences and improvements in -J handling, as
now J should work with -i and it actually creates a file first using the
initial name and then *renames* that to the one found in
Content-Disposition (if any).
-i: only shows headers for HTTP transfers now (as documented).
Previously it would also show for pieces of the transfer that were HTTP
(for example when doing FTP over a HTTP proxy).
-i: now shows trailers as well. Previously they were not shown at all.
--libcurl: the CURLOPT_HEADER is no longer set, as the header output is
now done in the header callback.
