1.1 KiB
1.1 KiB
DaemonBite 3DO USB Controller adapter
Introduction
With this simple to build adapter you can connect a 3DO gamepad (specifically tested using a Panasonic FZ-JP1 controller) to a PC, Raspberry PI, MiSTer FPGA etc. The Arduino Pro Micro has very low lag when configured as a USB gamepad and it is plug n' play once it has been programmed.
Only one controller is currently supported.
The headphone jack is not supported.
Parts you need
- Arduino Pro Micro (ATMega32U4)
- Male DB9 plug
- Wire
- Heat shrink tube (Ø ~20mm)
- Micro USB cable
Wiring
Male DB9 socket pins (look at the pins in the socket):
| DB9 |
|---|
| \1 2 3 4 5/ |
| \6 7 8 9/ |
| 3DO-DB9 | Arduino Pro Micro |
|---|---|
| 1 GND | GND |
| 2 VCC(5v) | VCC |
| 3 Audio.1(1v-pp) | |
| 4 Audio.1(1v-pp) | |
| 5 VCC(5v) | VCC |
| 6 P/S (Shift/Load) | 2 (PD1) |
| 7 CLK(125KHz) (Shift/Clock) | 3 (PD0) |
| 8 GND | GND |
| 9 DATA | A0 (PF7) |
License
This project is licensed under the GNU General Public License v3.0.