mirror of
https://github.com/mcgurk/Arduino-USB-HID-RetroJoystickAdapter
synced 2024-11-14 21:25:02 -05:00
140 lines
5.0 KiB
Markdown
140 lines
5.0 KiB
Markdown
# Poor man's "Keyrah" to connect C64 keyboard to USB (for BMC64 emulator)
|
|
|
|
|
|
|
|
## Building
|
|
- Solder all keyboard connector pins to Arduino Pro Micro.
|
|
- You can solder Restore key (connector pin "I") paraller to some other pin. I soldered "I" and "G" to Arduino pin A8. (this is actually not needed, because there is one free pin left). [Pins I used](https://github.com/mcgurk/Arduino-USB-HID-RetroJoystickAdapter/blob/master/C64_keyboard/README.md#pins-i-used).
|
|
- You can also connect LED of C64 to VCC/GND of Arduino. I used 220ohm resistor.
|
|
|
|
## Firmware/flashing
|
|
- Download Soarer controller firmware (Soarer_Controller_v1.20_beta4.zip): https://geekhack.org/index.php?topic=50437.0 (or https://deskthority.net/workshop-f7/soarer-s-keyboard-controller-firmware-t6767.html)
|
|
- Extract /firmware/Soarer_Controller_v1.20_beta4_atmega32u4.hex from Soarer_Controller_v1.20_beta4.zip
|
|
- Install Arduino IDE
|
|
- Connect RST to GND couple of times to get Arduino Pro Micro to programming mode (notice that com-port is different in programming mode in Windows)
|
|
- Flash firmware
|
|
```
|
|
# old: & "C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avrdude" -C"C:\Program Files (x86)\Arduino\hardware\tools\avr/etc/avrdude.conf" -v -p m32u4 -c avr109 -P COM5 -b 57600 -U flash:w:firmware\Soarer_Controller_v1.20_beta4_atmega32u4.hex:i
|
|
# 11.2.2023:
|
|
& "$ENV:LOCALAPPDATA\Arduino15\packages\arduino\tools\avrdude\6.3.0-arduino17\bin\avrdude.exe" -C"$ENV:LOCALAPPDATA\Arduino15\packages\arduino\tools\avrdude\6.3.0-arduino17\etc\avrdude.conf" -v -p m32u4 -c avr109 -P COM9 -b 57600 -U flash:w:firmware\Soarer_Controller_v1.20_beta4_atmega32u4.hex:i
|
|
```
|
|
|
|
## Setup
|
|
- Download [config file](https://github.com/mcgurk/Arduino-USB-HID-RetroJoystickAdapter/raw/master/C64_keyboard/C64_matrix.sc). Check pin order to match your setup.
|
|
- Compile and upload config file to Arduino Pro Micro
|
|
```
|
|
.\scas C64_matrix.sc C64_matrix.bin
|
|
.\scwr C64_matrix.bin
|
|
```
|
|
|
|
|
|
## Testing
|
|
- https://keycode.info/
|
|
|
|
## Pins I used
|
|
```
|
|
// Pin Label
|
|
// 20(A) 2(D2/PD1)
|
|
// 19(B) 3(D3/PD0)
|
|
// 18(C) 4(D4/PD4)
|
|
// 17(D) 5(D5/PC6)
|
|
// 16(E) 6(D6/PD7)
|
|
// 15(F) 7(D7/PE6)
|
|
// 14(G) 8(D8/PB4)
|
|
// 13(H) 9(D9/PB5)
|
|
// 12(0) 10(D10/PB6)
|
|
// 11(1) 16(D16/PB2)
|
|
// 10(2) 14(D14/PB3)
|
|
// 9(3) 15(D15/PB1)
|
|
// 8(4) A0(A0/PF7)
|
|
// 7(5) A1(A1/PF6)
|
|
// 6(6) A2(A2/PF5)
|
|
// 5(7) A3(A3/PF4)
|
|
// 4 N/C
|
|
// 3(8) TX(D1/PD3)
|
|
// 2 N/C
|
|
// 1(I) 8(D8/PB4)
|
|
```
|
|
## Links
|
|
|
|
- https://geekhack.org/index.php?topic=50437.0
|
|
- https://deskthority.net/workshop-f7/soarer-s-keyboard-controller-firmware-t6767.html
|
|
- Newest I found was Soarer_Controller_v1.20_beta4.zip from 26.10.2013
|
|
- Soarer config file documentation: https://deskthority.net/download/file.php?id=8833 (Soarer_Converter_v1.12_docs.zip)
|
|
- Keynames used in config file from https://deskthority.net/download/file.php?id=8833 (Soarer_Converter_v1.12_docs.zip): /docs/codes.html
|
|
- https://www.waitingforfriday.com/wp-content/uploads/2017/01/C64_Keyboard_Schematics_PNG.png
|
|
- http://kookye.com/wp-content/uploads/2016/02/Pinout-ProMicro.jpg
|
|
- I used this as starting point: https://github.com/abzman/Keyboard-config-file/blob/master/C64_matrix.sc
|
|
- C64-emulator for Raspberry Pi 2/3: http://accentual.com/bmc64/
|
|
- For bigger matrices use Arduino Micro (24 usable IO pins) https://www.40percent.club/2017/10/green-arduino-micro.html (The largest matrix you can do with a Pro Micro with its 18 pins is 9x9, 81 keys.)
|
|
- Example macros: https://sharktastica.co.uk/guides/soarers_2
|
|
|
|
## Macro without modifier key
|
|
Even though modifier key is mandatory, it can be replaced with unpressed modifiers. This writes shifted A when only a-key is pressed:
|
|
```
|
|
macroblock
|
|
macro A -ALL
|
|
SET_META LSHIFT
|
|
PRESS A
|
|
CLEAR_ALL
|
|
endmacro
|
|
endblock
|
|
```
|
|
|
|
## TheC64 Maxi Orange Pi PC
|
|
Buttons that needs modification:
|
|
```
|
|
+ 12
|
|
- 13
|
|
@ 26
|
|
* 27
|
|
^ 111
|
|
: 39
|
|
; 40
|
|
= 43
|
|
£ 110
|
|
C= 29
|
|
CTRL 15
|
|
RESTORE 104
|
|
INS/DEL 14
|
|
```
|
|
It goes to /usr/lib/vice/C64/theC64-sym-CLASSIC.vkm in ext4 partition of firmware-image. (THEC64_for_OPI.img or THE_VIC_20_for_OPI.img)
|
|
|
|
## OBSOLETE: Issues (all issues are fixed in newer BMC64 versions)
|
|
|
|
### Issue with Menu key (fixed in newer BMC64 versions)
|
|
- .crt-files doesn't work with C= + F7, so as workaround LSHIFT + F7 is F12.
|
|
|
|
### Issue with shift (fixed in newer BMC64 versions)
|
|
|
|
- "+", "-", "£", "@" and "*" doesn't produce GFX-chars when shifted
|
|
|
|
#### "Repair" rpi_sym.vkm (1.0.9)?
|
|
- at 5 6 0 -> 5 6 8
|
|
- minus 5 3 0 -> 5 3 8
|
|
- plus 5 0 0 -> 5 0 8
|
|
- sterling 6 0 0 -> 6 0 8
|
|
- asterisk 6 1 0 -> 6 1 8
|
|
```
|
|
sed -i 's/5 6 0/5 6 8/g; s/5 3 0/5 3 8/g; s/5 0 0/5 0 8/g; s/6 0 0/6 0 8/g; s/6 1 0/6 1 8/g' rpi_sym.vkm
|
|
```
|
|
|
|
## Stuff
|
|
Ultimate keybindings?
|
|
```
|
|
F9 = shift+return
|
|
F10 = Ultimate menu
|
|
F11 = Freeze
|
|
F12 = Restore
|
|
LCTRL = Control
|
|
LWIN = CBM
|
|
INS = Inst
|
|
HOME = Clr/home
|
|
PAUSE = run/stop
|
|
SCROLL_LOCK = Ultimate menu
|
|
BACKSPACE = Inst/del
|
|
LSHIFT+LCTRL+LWIN+LALT = Reset
|
|
|
|
Buttons: Freeze-Menu-Reset
|
|
```
|