2.2 KiB
2.2 KiB
Based on https://github.com/dmadison/ArduinoXInput
-
Install Arduino IDE hardware: https://github.com/dmadison/ArduinoXInput_AVR
-
Install Arduino IDE library from Library manager: XInput by David Madison
-
Tester from Windows Store: Game Controller Tester
-
Doesn't go to flashing mode automatically. Connect RST to GND to get Arduino Pro Micro to programming mode.
-
Arduino Pro Micro needs PB0/SS-pin to work. And it is not broken out. So no SPI for PSX-controller I guess? https://forum.arduino.cc/index.php?topic=427828.0
-
It could be used as pin 17 in code, if led could be disabled?
PsxNewLib
- https://github.com/SukkoPera/PsxNewLib
- https://github.com/SukkoPera/PsxControllerShield
- https://github.com/SukkoPera/PsxControllerShield/blob/master/doc/schematics.pdf
- (my green dualshock analog controller: SCPH-1200)
- https://store.curiousinventor.com/guides/PS2
- https://github.com/SukkoPera/PsxNewLib/issues/12
| PSX | SPI | Uno | Pro Micro | notes |
|---|---|---|---|---|
| 1 DATA (brown |
MISO → | D12 (PB4) | D14 (PB3) | |
| 2 CMD (orange |
MOSI ← | D11 (PB3) | D16 (PB2) | |
| 3 Vibration power (7.2-9V) (grey |
||||
| 4 GND (black |
GND | GND | ||
| 5 VCC (3.3V) (red |
VCC | VCC | ||
| 6 ATT (yellow |
SS ← | D10 (PB2) | D10 | (pro micro: SS would be D17 (PB0/RX_LED), but there is no pin D17) |
| 7 CLK (blue |
SCK ← | D13 (PB5) | D15 (PB1) | |
| 8 unknown (white |
||||
| 9 ACK (green |
(when this is needed?) | |||
| Wii | ||||
| 1 VCC (3.3V) | ||||
| 2 SCL | A5 (PC5) | D3 (PD0) | ||
| 3 Detect device (3.3V) | ||||
| 4 NC | ||||
| 5 SDA | A4 (PC4) | D2 (PD1) | ||
| 6 GND |