Arduino-USB-HID-RetroJoystickAdapter/XBox360_XInput

Based on https://github.com/dmadison/ArduinoXInput

• Install Arduino IDE hardware: https://github.com/dmadison/ArduinoXInput_AVR

• Install Arduino IDE library from Library manager: XInput by David Madison

• Tester from Windows Store: Game Controller Tester

• Online tester: https://gamepad-tester.com/

• Doesn't go to flashing mode automatically. Connect RST to GND to get Arduino Pro Micro to programming mode.

PsxNewLib

• https://github.com/SukkoPera/PsxNewLib (from Arduino IDE library manager 6.11.2021: 0.4.0)
• https://github.com/SukkoPera/PsxControllerShield
• https://github.com/SukkoPera/PsxControllerShield/blob/master/doc/schematics.pdf
• (my green dualshock analog controller: SCPH-1200) (Controller Type is: Guitar Hero)?
• (my black dualshock 2 controller: SCPH-10010) (Controller Type is: Dual Shock)
• https://store.curiousinventor.com/guides/PS2
• https://github.com/SukkoPera/PsxNewLib/issues/12
• https://github.com/dmadison/NintendoExtensionCtrl

PSX	SPI	Uno	Pro Micro	notes
1 DATA (brown )	MISO →	D12 (PB4)	D14 (PB3)	Use 1k pullup resistor to 3.3V!
2 CMD (orange )	MOSI ←	D11 (PB3)	D16 (PB2)
3 Vibration power (7.2-9V) (grey )
4 GND (black )		GND	GND
5 VCC (3.3V) (red )		VCC	VCC
6 ATT (yellow )	SS ←	D10 (PB2)	D10 (PB6)	(pro micro: SS would be D17 (PB0/RX_LED), but there is no pin D17)
7 CLK (blue )	SCK ←	D13 (PB5)	D15 (PB1)
8 unknown (white )
9 ACK (green )				(when this is needed?)
Wii
1 VCC (3.3V) (red )
2 SCL (yellow )		A5 (PC5)	D3 (PD0)
3 Detect device (3.3V) (black )			D4 (PD4)	Use 10k pulldown resistor to GND!
4 NC
5 SDA (green )		A4 (PC4)	D2 (PD1)
6 GND (white )

TODO

• Analog triggers for Dualshock 2
• Name in Windows: Controller (Arduino Leonardo), with real XB360 controller: Controller (XBOX 360 for Windows)? Can it be changed in C:\Program Files (x86)\Arduino\hardware\xinput\avr\boards.txt?