mirror/Arduino-USB-HID-RetroJoystickAdapter
1
0
Fork 0
mirror of https://github.com/mcgurk/Arduino-USB-HID-RetroJoystickAdapter synced 2024-11-22 00:52:22 -05:00
Code Issues Releases Wiki Activity

Update temp.ino

Browse Source
This commit is contained in:
Jarno Lehtinen 2018-12-07 14:33:38 +02:00 committed by GitHub
parent 328a27126f
commit ffad53f268
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 3 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
C64_4joy_adapter/temp.ino
View File

@ -67,7 +67,7 @@ ISR(INT3_vect, ISR_NAKED) { // falling edge, output joystick 4
asm volatile( asm volatile(
" push r0 \n" // save register r0 " push r0 \n" // save register r0
" lds r0, %[gpio] \n" // GPIOR1 address is 42 and out-command works only with 0-31 " lds r0, %[gpio] \n" // GPIOR1 address is 42 and out-command works only with 0-31
" out %[pin], r0 \n" // so we need lds-command " out %[pin], r0 \n" // so we need lds-command and r0 register
" pop r0 \n" // restore previous r0 " pop r0 \n" // restore previous r0
" rjmp INT3_vect_part_2 \n" // go to part 2 for required prologue and epilogue " rjmp INT3_vect_part_2 \n" // go to part 2 for required prologue and epilogue
:: [pin] "I" (_SFR_IO_ADDR(PORTB)), [gpio] "I" (_SFR_IO_ADDR(GPIOR1))); :: [pin] "I" (_SFR_IO_ADDR(PORTB)), [gpio] "I" (_SFR_IO_ADDR(GPIOR1)));
@ -90,7 +90,7 @@ void setup() {
EIMSK = B1100; // enable INT2 (Bx1xx) and INT3 (B1xxx) EIMSK = B1100; // enable INT2 (Bx1xx) and INT3 (B1xxx)
//Serial.begin(115200); //Serial.begin(115200);
//PORTD &= ~_BV(5); //PORTD &= ~_BV(5); // TX-LED on
// We can't use millis() or micros() because Timer0 interrupts are disabled. We use 16-bit Timer1 with 1024 prescaler as "clock". // We can't use millis() or micros() because Timer0 interrupts are disabled. We use 16-bit Timer1 with 1024 prescaler as "clock".
TIMSK1 = 0; // disable timer1 interrupts TIMSK1 = 0; // disable timer1 interrupts
@ -118,6 +118,6 @@ void loop() {
GPIOR0 = joy1; GPIOR1 = joy2; GPIOR0 = joy1; GPIOR1 = joy2;
PORTB = *ptr; // can ISR occur while only one byte from 16-bit address is copied? should this be done interrupt off? PORTB = *ptr; // is this atomic? probably, because ptr is 6-bit ptr?
//delayMicroseconds(10); //delayMicroseconds(10);
} }