mirror/Arduino-USB-HID-RetroJoystickAdapter
1
0
Fork 0
mirror of https://github.com/mcgurk/Arduino-USB-HID-RetroJoystickAdapter synced 2024-11-25 10:32:19 -05:00
Code Issues Releases Wiki Activity

Update README.md

Browse Source
This commit is contained in:
Jarno Lehtinen 2019-02-12 21:15:45 +02:00 committed by GitHub
parent c121d0d688
commit ec70bf95d7
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 31 additions and 33 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

64
C64_keyboard/README.md
View File

@ -1,13 +1,26 @@
C64: ## Building
- https://geekhack.org/index.php?topic=50437.0 - Solder all keyboard connector pins to Arduino Pro Micro.
- https://deskthority.net/workshop-f7/soarer-s-keyboard-controller-firmware-t6767.html - You can solder Restore key (connector pin "I") paraller to some other pin. I soldered "I" and "G" to Arduino pin A8.
- Soarer_Controller_v1.20_beta4.zip (26.10.2013)
- https://www.waitingforfriday.com/wp-content/uploads/2017/01/C64_Keyboard_Schematics_PNG.png
- http://kookye.com/wp-content/uploads/2016/02/Pinout-ProMicro.jpg
- https://github.com/abzman/Keyboard-config-file/blob/master/C64_matrix.sc
- https://github.com/dabonetn/C64USBKey/blob/master/C64USBKeyboard2.ino
- https://raw.githubusercontent.com/abzman/Keyboard-config-file/master/C64_matrix.sc
## Firmware/flashing
- Download Soarer controller firmware: https://geekhack.org/index.php?topic=50437.0
- Install Arduino IDE
- Connect RST to GND couple of times to get Arduino Pro Micro to programming mode (notice that com-port is different in programming mode in Windows)
- Flash firmware
```
& "C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avrdude" -C"C:\Program Files (x86)\Arduino\hardware\tools\avr/etc/avrdude.conf" -v -p m32u4 -c avr109 -P COM5 -b 57600 -U flash:w:firmware\Soarer_Controller_v1.20_beta4_atmega32u4.hex:i
```
## Setup
Download configfile. Check pin order to match your setup.
```
.\scas C64_matrix.sc C64_matrix.bin
.\scwr C64_matrix.bin
```
## Pins I used
``` ```
//KeyBoard Arduino Pro Micro //KeyBoard Arduino Pro Micro
// Pin Pin Label GPIO pin (kirjaimet = columns (rivit), numerot = rows (otsikot)) // Pin Pin Label GPIO pin (kirjaimet = columns (rivit), numerot = rows (otsikot))
@ -30,28 +43,13 @@ C64:
// 4 N/C // 4 N/C
// 3 1 1 - TX PD3 8 // 3 1 1 - TX PD3 8
// 2 N/C // 2 N/C
// 1 11 8 - A8 PB4 1 // 1 11 8 - A8 PB4 I
```
C64_matrix.sc:
```
sense PB6 PB2 PB3 PB1 PF7 PF6 PF5 PF4 PD3
strobe PD1 1 ESC LCTRL PAUSE SPACE LGUI Q 2 UNASSIGNED
strobe PD0 3 W A LSHIFT Z S E 4 UNASSIGNED
strobe PD4 5 R D X C F T 6 UNASSIGNED
strobe PC6 7 Y G V B H U 8 UNASSIGNED
strobe PD7 9 I J N M K O 0 UNASSIGNED
strobe PE6 LANG_1 P L COMMA PERIOD LANG_3 LANG_4 MINUS UNASSIGNED
strobe PB4 BACKSLASH LANG_2 SEMICOLON SLASH RSHIFT EQUAL INSERT HOME LANG_5
strobe PB5 BACKSPACE ENTER RIGHT DOWN F1 F3 F5 F7 UNASSIGNED
```
Reset to GND couple of times, then (notice that com-port is different in programming mode):
```
& "C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avrdude" -C"C:\Program Files (x86)\Arduino\hardware\tools\avr/etc/avrdude.conf" -v -p m32u4 -c avr109 -P COM5 -b 57600 -U flash:w:firmware\Soarer_Controller_v1.20_beta4_atmega32u4.hex:i
```
```
.\scas C64_matrix.sc C64_matrix.bin
.\scwr C64_matrix.bin
```
Tallettuu vaikka firmiksen uudelleenflashais!!!
http://www.keyboardtester.com/tester.html
## Links
- https://geekhack.org/index.php?topic=50437.0
- https://deskthority.net/workshop-f7/soarer-s-keyboard-controller-firmware-t6767.html
- Soarer_Controller_v1.20_beta4.zip (26.10.2013)
- https://www.waitingforfriday.com/wp-content/uploads/2017/01/C64_Keyboard_Schematics_PNG.png
- http://kookye.com/wp-content/uploads/2016/02/Pinout-ProMicro.jpg
- I used this as starting point: https://github.com/abzman/Keyboard-config-file/blob/master/C64_matrix.sc