mirror/Arduino-USB-HID-RetroJoystickAdapter
1
0
Fork 0
mirror of https://github.com/mcgurk/Arduino-USB-HID-RetroJoystickAdapter synced 2024-12-22 07:28:53 -05:00
Code Issues Releases Wiki Activity

Update README.md

Browse Source
This commit is contained in:
mcgurk 2016-09-05 23:48:39 +03:00 committed by GitHub
parent 257f737541
commit 7c2de9fc53
1 changed files with 1 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
README.md
View File

@ -29,7 +29,7 @@ https://www.arduino.cc/en/Main/Software
In Arduino IDE you have to select board. On my case some reason "Arduino Leonardo" selections works better than "Arduino/Genuino Micro". With Leonardo-setting RX and TX leds are normally off and blinks when data is transfered to/from USB. With Micro-setting LED's are normally on and they blinks to off when data is transferring.
- Tools->Port->COMx
In Windows Arduino IDE shows only available com-ports. In most cases it's biggest numbered COM-port. COM-port number can change when you start to programming first time (COM-port number can be different after joystick-features are enabled). When I tested with RetrOrangePi (Raspbian Linux), port was ttyACM0.
In Windows Arduino IDE shows only available com-ports. In most cases it's biggest numbered COM-port. COM-port number can change when you start to upload program first time (COM-port number can be different after joystick-features are enabled). If this happens, just change COM-port and start upload again. When I tested with RetrOrangePi (Raspbian Linux), port was ttyACM0.
Install joystick library (instructions for installing library: todo):
https://github.com/MHeironimus/ArduinoJoystickLibrary