--Important for systemd -- daemonize is important for systemd. if you set this to false the systemd startup will freeze. daemonize = false run_as_root = true pidfile = "/run/prosody/prosody.pid" plugin_paths = { "/opt/xmpp-proxy/prosody-modules", "/opt/prosody-modules" } -- Prosody Example Configuration File -- -- Information on configuring Prosody can be found on our -- website at https://prosody.im/doc/configure -- -- Tip: You can check that the syntax of this file is correct -- when you have finished by running this command: -- prosodyctl check config -- If there are any errors, it will let you know what and where -- they are, otherwise it will keep quiet. -- -- The only thing left to do is rename this file to remove the .dist ending, and fill in the -- blanks. Good luck, and happy Jabbering! ---------- Server-wide settings ---------- -- Settings in this section apply to the whole server and are the default settings -- for any virtual hosts -- This is a (by default, empty) list of accounts that are admins -- for the server. Note that you must create the accounts separately -- (see https://prosody.im/doc/creating_accounts for info) -- Example: admins = { "user1@example.com", "user2@example.net" } admins = { } -- Enable use of libevent for better performance under high load -- For more information see: https://prosody.im/doc/libevent --use_libevent = true -- Prosody will always look in its source directory for modules, but -- this option allows you to specify additional locations where Prosody -- will look for modules first. For community modules, see https://modules.prosody.im/ --plugin_paths = {} -- This is the list of modules Prosody will load on startup. -- It looks for mod_modulename.lua in the plugins folder, so make sure that exists too. -- Documentation for bundled modules can be found at: https://prosody.im/doc/modules modules_enabled = { -- Generally required "roster"; -- Allow users to have a roster. Recommended ;) "saslauth"; -- Authentication for clients and servers. Recommended if you want to log in. --"tls"; -- Add support for secure TLS on c2s/s2s connections --"dialback"; -- s2s dialback support "disco"; -- Service discovery -- Not essential, but recommended "carbons"; -- Keep multiple clients in sync "pep"; -- Enables users to publish their avatar, mood, activity, playing music and more "private"; -- Private XML storage (for room bookmarks, etc.) "blocklist"; -- Allow users to block communications with other users "vcard4"; -- User profiles (stored in PEP) "vcard_legacy"; -- Conversion between legacy vCard and PEP Avatar, vcard "limits"; -- Enable bandwidth limiting for XMPP connections -- Nice to have "version"; -- Replies to server version requests "uptime"; -- Report how long server has been running "time"; -- Let others know the time here on this server "ping"; -- Replies to XMPP pings with pongs "register"; -- Allow users to register on this server using a client and change passwords --"mam"; -- Store messages in an archive and allow users to access it --"csi_simple"; -- Simple Mobile optimizations -- Admin interfaces "admin_adhoc"; -- Allows administration via an XMPP client that supports ad-hoc commands --"admin_telnet"; -- Opens telnet console interface on localhost port 5582 -- HTTP modules --"bosh"; -- Enable BOSH clients, aka "Jabber over HTTP" --"websocket"; -- XMPP over WebSockets --"http_files"; -- Serve static files from a directory over HTTP -- Other specific functionality --"groups"; -- Shared roster support --"server_contact_info"; -- Publish contact information for this service --"announce"; -- Send announcement to all online users --"welcome"; -- Welcome users who register accounts --"watchregistrations"; -- Alert admins of registrations --"motd"; -- Send a message to users when they log in --"legacyauth"; -- Legacy authentication. Only used by some old clients and bots. --"proxy65"; -- Enables a file transfer proxy service which clients behind NAT can use "net_proxy"; "s2s_outgoing_proxy"; } -- These modules are auto-loaded, but should you want -- to disable them then uncomment them here: modules_disabled = { -- "offline"; -- Store offline messages -- "c2s"; -- Handle client connections -- "s2s"; -- Handle server-to-server connections -- "posix"; -- POSIX functionality, sends server to background, enables syslog, etc. } -- Disable account creation by default, for security -- For more information see https://prosody.im/doc/creating_accounts allow_registration = false -- we don't need prosody doing any encryption, xmpp-proxy does this now -- these are likely set to true somewhere in your file, find them, make them false -- you can also remove all certificates from your config s2s_require_encryption = false s2s_secure_auth = false -- xmpp-proxy outgoing is listening on this port, make all outgoing s2s connections directly to here s2s_outgoing_proxy = { "xp1.example.org", 15270 } -- handle PROXY protocol on these ports proxy_port_mappings = { [15222] = "c2s", [15269] = "s2s" } --[[ Specifies a list of trusted hosts or networks which may use the PROXY protocol If not specified, it will default to: 127.0.0.1, ::1 (local connections only) An empty table ({}) can be configured to allow connections from any source. Please read the module documentation about potential security impact. ]]-- proxy_trusted_proxies = { "192.5.0.40" } -- don't listen on any normal c2s/s2s ports (xmpp-proxy listens on these now) -- you might need to comment these out further down in your config file if you set them c2s_ports = {} legacy_ssl_ports = {} -- you MUST have at least one s2s_ports defined if you want outgoing S2S to work, don't ask.. s2s_ports = {15268} -- Force clients to use encrypted connections? This option will -- prevent clients from authenticating unless they are using encryption. c2s_require_encryption = false allow_unencrypted_plain_auth = true -- Some servers have invalid or self-signed certificates. You can list -- remote domains here that will not be required to authenticate using -- certificates. They will be authenticated using DNS instead, even -- when s2s_secure_auth is enabled. --s2s_insecure_domains = { "insecure.example" } -- Even if you disable s2s_secure_auth, you can still require valid -- certificates for some domains by specifying a list here. --s2s_secure_domains = { "jabber.org" } -- Enable rate limits for incoming client and server connections limits = { c2s = { rate = "10kb/s"; }; s2sin = { rate = "30kb/s"; }; } -- Select the authentication backend to use. The 'internal' providers -- use Prosody's configured data storage to store the authentication data. authentication = "internal_hashed" -- Select the storage backend to use. By default Prosody uses flat files -- in its configured data directory, but it also supports more backends -- through modules. An "sql" backend is included by default, but requires -- additional dependencies. See https://prosody.im/doc/storage for more info. --storage = "sql" -- Default is "internal" -- For the "sql" backend, you can uncomment *one* of the below to configure: --sql = { driver = "SQLite3", database = "prosody.sqlite" } -- Default. 'database' is the filename. --sql = { driver = "MySQL", database = "prosody", username = "prosody", password = "secret", host = "localhost" } --sql = { driver = "PostgreSQL", database = "prosody", username = "prosody", password = "secret", host = "localhost" } -- Archiving configuration -- If mod_mam is enabled, Prosody will store a copy of every message. This -- is used to synchronize conversations between multiple clients, even if -- they are offline. This setting controls how long Prosody will keep -- messages in the archive before removing them. archive_expires_after = "1w" -- Remove archived messages after 1 week -- You can also configure messages to be stored in-memory only. For more -- archiving options, see https://prosody.im/doc/modules/mod_mam -- Logging configuration -- For advanced logging see https://prosody.im/doc/logging log = { -- info = "prosody.log"; -- Change 'info' to 'debug' for verbose logging -- error = "prosody.err"; --info = "*syslog"; -- Uncomment this for logging to syslog debug = "*console"; -- Log to the console, useful for debugging with daemonize=false } -- Uncomment to enable statistics -- For more info see https://prosody.im/doc/statistics -- statistics = "internal" -- Certificates -- Every virtual host and component needs a certificate so that clients and -- servers can securely verify its identity. Prosody will automatically load -- certificates/keys from the directory specified here. -- For more information, including how to use 'prosodyctl' to auto-import certificates -- (from e.g. Let's Encrypt) see https://prosody.im/doc/certificates -- Location of directory to find certificates in (relative to main config file): certificates = "certs" -- HTTPS currently only supports a single certificate, specify it here: --https_certificate = "/etc/prosody/certs/localhost.crt" ----------- Virtual hosts ----------- -- You need to add a VirtualHost entry for each domain you wish Prosody to serve. -- Settings under each VirtualHost entry apply *only* to that host. VirtualHost "one.example.org" VirtualHost "two.example.org" --VirtualHost "example.com" -- certificate = "/path/to/example.crt" ------ Components ------ -- You can specify components to add hosts that provide special services, -- like multi-user conferences, and transports. -- For more information on components, see https://prosody.im/doc/components ---Set up a MUC (multi-user chat) room server on conference.example.com: --Component "conference.example.com" "muc" --- Store MUC messages in an archive and allow users to access it --modules_enabled = { "muc_mam" } ---Set up an external component (default component port is 5347) -- -- External components allow adding various services, such as gateways/ -- transports to other networks like ICQ, MSN and Yahoo. For more info -- see: https://prosody.im/doc/components#adding_an_external_component -- --Component "gateway.example.com" -- component_secret = "password"