xeps/xep-0389.xml

766 lines
29 KiB
XML

<?xml version='1.0' encoding='UTF-8'?>
<!DOCTYPE xep SYSTEM 'xep.dtd' [
<!ENTITY % ents SYSTEM 'xep.ent'>
%ents;
<!ENTITY bcp47 "<span class='ref'><link url='http://tools.ietf.org/html/bcp47'>BCP 47</link></span> <note>BCP 47: Tags for Identifying Languages &lt;<link url='http://tools.ietf.org/html/bcp47'>http://tools.ietf.org/html/bcp47</link>&gt;.</note>" >
]>
<?xml-stylesheet type='text/xsl' href='xep.xsl'?>
<xep>
<header>
<title>Extensible In-Band Registration</title>
<abstract>
This specification defines an XMPP protocol extension for in-band
registration with instant messaging servers and other services with which an
XMPP entity may initiate a stream.
It aims to improve upon the state of the art and replace XEP-0077: In-Band
Registration by allowing multi-factor registration mechanisms, and account
recovery.
</abstract>
&LEGALNOTICE;
<number>0389</number>
<status>Experimental</status>
<type>Standards Track</type>
<sig>Standards</sig>
<approver>Council</approver>
<dependencies>
<spec>XMPP Core</spec>
</dependencies>
<supersedes>
<spec>XEP-0077</spec>
</supersedes>
<supersededby/>
<shortname>ibr2</shortname>
&sam;
<revision>
<version>0.6.0</version>
<date>2020-11-17</date>
<initials>ssw</initials>
<remark>
<p>Error out if a client selects an invalid flow</p>
</remark>
</revision>
<revision>
<version>0.5.0</version>
<date>2020-05-26</date>
<initials>ssw</initials>
<remark>
<ul>
<li>Overhaul document for readability.</li>
<li>Add JID and username information to success element.</li>
<li>Always require disco/caps feature.</li>
<li>More examples.</li>
</ul>
</remark>
</revision>
<revision>
<version>0.4.0</version>
<date>2020-04-22</date>
<initials>ssw</initials>
<remark>
<ul>
<li>Add OOB challenge type.</li>
<li>Add IQ query for flows.</li>
<li>Add a glossary.</li>
<li>Make challenge listings more consistent.</li>
<li>Cleanup and expand the registrar considerations section.</li>
<li>Clarifications and typo fixes throughout the text.</li>
</ul>
</remark>
</revision>
<revision>
<version>0.3.0</version>
<date>2020-04-19</date>
<initials>ssw</initials>
<remark>
<ul>
<li>Move back to experimental.</li>
<li>Add IQ variant of registration/recovery.</li>
<li>Allow client to select between multiple flows.</li>
</ul>
</remark>
</revision>
<revision>
<version>0.2.0</version>
<date>2018-10-01</date>
<initials>XEP Editor (jsc)</initials>
<remark>Defer due to lack of activity.</remark>
</revision>
<revision>
<version>0.1.0</version>
<date>2017-03-16</date>
<initials>XEP Editor (ssw)</initials>
<remark>
Move to experimental.
</remark>
</revision>
<revision>
<version>0.0.2</version>
<date>2017-02-15</date>
<initials>ssw</initials>
<remark>
<ul>
<li>Don't allow feature to act as auth.</li>
<li>Use a more conventional list for challenge type listings.</li>
</ul>
</remark>
</revision>
<revision>
<version>0.0.1</version>
<date>2017-02-08</date>
<initials>ssw</initials>
<remark><p>First draft.</p></remark>
</revision>
</header>
<section1 topic='Introduction' anchor='intro'>
<p>
Historically, registering with an XMPP service has been difficult.
Each server either used customized out-of-band registration mechanisms such
as web forms which were difficult to discover, or they used &xep0077; which
could easily be abused by spammers to register large numbers of accounts and
which allowed for only limited extensibility.
</p>
<p>
To solve these issues this specification provides a new in-band registration
protocol that allows servers to present the user with a series of
"challenges".
This allows for both multi-stage proof-of-possession registration flows and
spam prevention mechanisms such as proof-of-work functions.
</p>
</section1>
<section1 topic='Requirements' anchor='reqs'>
<ul>
<li>
The server MUST be able to present multiple challenges to the client.
</li>
<li>
The server SHOULD be able reduce account registration spam.
</li>
<li>
The server MAY present a challenge that requires the user to complete a
step out-of-band.
</li>
<li>
A client SHOULD be able to register an account without requiring the user
to leave the client.
</li>
<li>
A client MUST be able to use the same mechanism to register an account and
to recover a forgotten password (subject to server policy).
</li>
<li>
A client MUST be able to register with a server as well as external
components.
</li>
</ul>
</section1>
<section1 topic='Glossary' anchor='glossary'>
<dl>
<di>
<dt>Challenge</dt>
<dd>
A challenge is an action taken during account registration or recovery
that requires a response.
For example, displaying a form to a user or asking for a token.
</dd>
</di>
<di>
<dt>Challenge Type</dt>
<dd>
The type of a challenge is a unique string that identifies the type of
payload that can be expected.
For example, a challenge element with type "jabber:x:data" can be
expected to contain a data form.
Challenge types must be defined and registered in the challenge types
registry.
When defining a challenge it is often convenient to reuse an XML
namespace from the document defining the challenge.
</dd>
</di>
<di>
<dt>Flow</dt>
<dd>
A flow, or more specifically a "registration flow" or "recovery flow",
is a collection of challenges that together can be used to gather enough
information to register a new account or recover an existing account.
</dd>
</di>
</dl>
</section1>
<section1 topic='Use Cases' anchor='usecases'>
<ul>
<li>
As a server operator, I want to prevent individual spammers from
registering many accounts so I require registrants to perform a
proof-of-work function before registration is completed.
</li>
<li>
As a server operator I want to prevent bots from registering accounts so I
require that registrants submit a form which requires user interaction.
</li>
<li>
As a user I do not want to lose access to my account if I forget my
password, so I provide my email and telephone number in response to the
servers data form.
</li>
<li>
As a server operator I do not want users to accidentally add an incorrect
recovery address so I send an email with a unique link to the indicated
account and require that they click the link before registration can
continue.
</li>
<li>
As a server operator I want to prevent SPIM using a proof-of-possession
protocol so I present the user with a form asking for a mobile phone
number and then send a verification code to that number via SMS and show
another form requesting the verification code.
</li>
</ul>
</section1>
<section1 topic='Discovering Support' anchor='disco'>
<p>
Clients, servers, and other services such as components that support
Extensible IBR MUST advertise the fact by including a feature of
"urn::xmpp:register:0" in response to &xep0030; information requests and in
their &xep0115; profiles.
</p>
<example caption='Disco info response'><![CDATA[
<query xmlns='http://jabber.org/protocol/disco#info'>
<feature var='urn:xmpp:register:0' />
</query>]]></example>
</section1>
<section1 topic='Flows' anchor='flows'>
<p>
Registration or recovery is completed after responding to a series of
challenges issued by the server.
Challenges are grouped in to "flows", a number of challenges that may be
issued together to complete an action.
For example, a registration flow might be created that issues a data form
challenge which will be shown to the user to gather information, then issues
a second data form challenge to let the user enter a confirmation code that
was sent to their email.
</p>
<section2 topic='Stream Feature'>
<p>
If a server supports registering for or recovering an account using
Extensible IBR during stream negotiation, it MUST inform the connecting
client when returning stream features during the stream negotiation process.
This is done by including a &lt;register/&gt; element, qualified by the
'urn:xmpp:register:0' namespace for account registration, or a
&lt;recovery/&gt; element qualified by the same namespace for account
recovery.
The register and recovery features are always voluntary-to-negotiate.
The registration and recovery features MUST NOT be advertised before a
security layer has been negotiated, eg. using direct TLS or opportunistic
TLS.
They SHOULD be advertised at the same time as the SASL authentication
feature, meaning that after registration or recovery is completed SASL
authentication can proceed.
</p>
<p>
For recovery or registration, the server MUST include a list of all
challenges which the client may receive during the course of registering or
recovering an account.
These are grouped into "flows" and let the client pick a registration
workflow that only contains challenges which the client supports.
Each &lt;flow/&gt; element MUST have a unique "id" attribute which is used
by the client to identify the flow being selected.
The id attribute is only used during this particular flow negotiation and
has no meaning after a flow has been selected.
Flows must also have at least one &lt;name/&gt; element containing a short,
human readable description of the flow.
If multiple &lt;name/&gt; elements are present they MUST have unique values
for the "xml:lang" attribute.
Clients MAY use the name element to show the different flows to the user and
ask them to pick between them.
Each flow element must also contain an unordered set of &lt;challenge/&gt;
elements representing the various challenge types that may be required to
complete the registration or recovery flow.
Each &lt;challenge/&gt; element contains a "type" attribute that uniquely
identifies the challenge for the purpose of determining if it is supported.
If a flow would offer the same challenge twice (eg. two data forms asking
for different data), the challenge SHOULD only be listed once in the flow
element.
</p>
<p>
For example, a server may advertise a "Verify with SMS" flow and a "Verify
by Phone Call" flow that both show a data form asking for a phone number
and then a second data form asking for a token provided to the user in a
text message or phone call depending on which flow the user selects.
</p>
<example caption='Host Advertises Stream Features'><![CDATA[
<stream:features>
<mechanisms xmlns='urn:xmpp:sasl:0'>
<mechanism>EXTERNAL</mechanism>
<mechanism>SCRAM-SHA-1-PLUS</mechanism>
<mechanism>SCRAM-SHA-1</mechanism>
<mechanism>PLAIN</mechanism>
</mechanisms>
<register xmlns='urn:xmpp:register:0'>
<flow id='0'>
<name>Verify with SMS</name>
<challenge type='jabber:x:data'/>
</flow>
<flow id='1'>
<name>Verify by Phone Call</name>
<challenge type='jabber:x:data'/>
</flow>
<flow id='2'>
<name>Verify with the web</name>
<challenge type='jabber:x:data'/>
<challenge type='jabber:x:oob'/>
</flow>
</register>
<recovery xmlns='urn:xmpp:register:0'>
<flow id='0'>
<name>Visit Password Recovery Site</name>
<challenge type='jabber:x:oob'/>
</flow>
</recovery>
</stream:features>]]></example>
</section2>
<p>
Just because a challenge type is listed by the server in the initial flow
element does not mean that it will be issued by the server.
Servers MAY choose to issue more or fewer challenges based on the result of
previous challenges and may not use every challenge type listed in the
original flow.
</p>
<section2 topic='Retrieving the Flows'>
<p>
Registration or recovery may also be completed after stream neogtiation if
server policy allows it.
</p>
<p>
To find what flows an entity provides (if any) after stream negotiation is
complete the requester can send an IQ of type "get" containing a
&lt;register&gt; or &lt;recovery&gt; element qualified by the
"urn:xmpp:register:0" namespace.
</p>
<example caption='Registration flows query'><![CDATA[
<iq type='get'>
<register xmlns='urn:xmpp:register:0'/>
</iq>]]></example>
<p>
When responding to a query for registration or recovery flows the list of
challenges MUST be included just as it would be during stream feature
negotiation.
That is, a "register" or "recovery" element containing a list of flows,
each with an id, containing a name and a list of challenges.
</p>
<example caption='Registration flows results'><![CDATA[
<iq type='result'>
<register xmlns='urn:xmpp:register:0'>
<flow id='0'>
<name>Verify with SMS</name>
<challenge type='jabber:x:data'/>
</flow>
<flow id='1'>
<name>Verify by Phone Call</name>
<challenge type='jabber:x:data'/>
</flow>
<flow id='2'>
<name>Verify with the web</name>
<challenge type='jabber:x:data'/>
<challenge type='jabber:x:oob'/>
</flow>
</register>
</iq>]]></example>
<p>
If an entity supports issuing challenges but does not provide any flows
after stream negotiation is complete it MUST respond with an empty list.
Similarly, an entity that supports this specification but does not support
issuing challenges itself (for example, a client that only supports
receiving challenges) it MUST respond successfully with an empty list.
</p>
<example caption='Empty registration flows results'><![CDATA[
<iq type='result'>
<register xmlns='urn:xmpp:register:0'/>
</iq>]]></example>
</section2>
<section2 topic='Selecting a Flow' anchor='selecting'>
<p>
A client selects the registration or recovery feature for negotiation by
replying with an element of the same name and namespace.
The element MUST contain a &lt;flow&gt; element that MUST have an "id"
attribute matching one of the flows advertised by the server.
For example, to select the "Verify by Phone Call" registration flow from
the previous example, the client would reply with:
</p>
<example caption='Client selects a recovery flow'><![CDATA[
<register xmlns='urn:xmpp:register:0'>
<flow id='1'/>
</register>]]></example>
<p>
If during stream initialization the client attempts to select a flow that
does not match one of the flows sent by the server, the server MUST
respond with an "undefined-condition" stream error containing an
"invalid-flow" application error qualified by the 'urn:xmpp:register:0'
namespace.
</p>
<example caption='Server responds to an invalid selection during stream negotiation'><![CDATA[
<stream:error>
<undefined-condition xmlns='urn:ietf:params:xml:ns:xmpp-streams'/>
<invalid-flow xmlns='urn:xmpp:register:0'/>
</stream:error>
</stream:stream>]]></example>
<p>
If the client is initiating registration or recovery after a stream has
already been initiated it uses the same registration element wrapped in an
IQ of type "set".
</p>
<example caption='Client selects a recovery flow after stream negotiation'><![CDATA[
<iq type='set' id='foo'>
<recovery xmlns='urn:xmpp:register:0'>
<flow id='0'/>
</recovery>
</iq>]]></example>
<p>
If the client attempts to select a flow that does not match one of the
flows sent by the server in response to an IQ after stream initialization
the server MUST respond with a stanza error of type "item-not-found".
</p>
<example caption='Server responds to an invalid selection after stream negotiation'><![CDATA[
<iq type='error'>
<error type='cancel'>
<item-not-found xmlns='urn:ietf:params:xml:ns:xmpp-stanzas'/>
</error>
</iq>]]></example>
</section2>
<section2 topic='Issuing Challenges' anchor='challenge'>
<p>
If a valid flow is selected by the client the server then replies to the
IQ or feature selection with a challenge.
If replying to an IQ, the challenge must be wrapped in an IQ of type
"result".
Challenges take the form of a &lt;challenge/&gt; element qualified by the
'urn:xmpp:register:0' namespace with a 'type' attribute that uniquely
identifies the type of payload a client might expect the element to
contain.
</p>
<example caption='Server issues a challenge'><![CDATA[
<challenge xmlns='urn:xmpp:register:0'
type='urn:example:challenge'>
<example xmlns='urn:example:challenge'>Payload</example>
</challenge>]]></example>
<p>
After a challenge is received, the client replies to the challenge by
sending a &lt;response/&gt; element qualified by the 'urn:xmpp:register:0'
namespace or a cancellation as defined later in this document.
If the client sends a response, it MUST also include the payload
corresponding to the challenges 'type' element (which may be empty).
</p>
<example caption='Client responds to a challenge'><![CDATA[
<response xmlns='urn:xmpp:register:0'>
<result xmlns='urn:example:challenge'>Example Response</result>
</response>]]></example>
<p>
After a response is received, if the server needs more information it MAY
issue another challenge.
For example, if the user has entered their email in response to a
challenge, the server might send an email and then issue another challenge
asking for the unique code sent in the email.
</p>
</section2>
<section2 topic='Completing Registration or Recovery' anchor='completion'>
<p>
If after receiving a challenge or response a client or server does not
wish to continue registration or recovery, it may send an empty
&lt;cancel/&gt; element qualified by the 'urn:xmpp:register:0' namespace.
This informs the client or server that registration is complete.
This is the same as submitting a data form of type 'cancel' in response to
a data form challenge.
</p>
<example caption='User Cancels Registration or Recovery'><![CDATA[
<cancel xmlns='urn:xmpp:register:0'/>]]></example>
<p>
If the IQ based registration or recovery flow is being used and the server
wishes to cancel the flow, it MAY respond to any IQ with the cancel
element and type "result".
</p>
<example caption='Client or server cancels request'><![CDATA[
<iq type='result' id='bar'>
<cancel xmlns='urn:xmpp:register:0'/>
</iq>]]></example>
<p>
A server may also issue a cancelation IQ with type 'set' if it wishes to
cancel after a request/response has been received (ie. when there is no
existing IQ to respond to).
</p>
<example caption='Server cancels flow'><![CDATA[
<iq type='set' id='bar'>
<cancel xmlns='urn:xmpp:register:0'/>
</iq>]]></example>
<p>
If the client successfully completes all required challenges during stream
negotiation the server MUST return a &lt;success/&gt; element qualified by
the 'urn:xmpp:register:0' namespace, at which point it may continue with
the stream negotiation process.
The success element MUST contain a &lt;jid&gt; element containing the bare
JID as registered or recovered by the server and a &lt;username&gt;
element containing the simple user name for use with SASL (normally this
will be the same as the localpart of the JID).
</p>
<example caption='Server indicates success during steam negotiation'><![CDATA[
<success xmlns='urn:xmpp:register:0'>
<jid>mercutio@example.net</jid>
<username>mercutio</username>
</success>]]></example>
<p>
If the IQ based flow is being used and the server wishes to indicate
success after a challenge has been completed it sends an IQ of type "set"
containing the &lt;success/&gt; element.
</p>
<example caption='Server indicates success after stream negotiation'><![CDATA[
<iq type='set' id='bar'>
<success xmlns='urn:xmpp:register:0'>
<jid>mercutio@example.net</jid>
<username>mercutio</username>
</success>
</iq>]]></example>
</section2>
</section1>
<section1 topic='Challenges' anchor='challenge'>
<p>
This document defines several challenges that use existing technologies.
</p>
<section2 topic='Data Form' anchor='dataform'>
<p>
Challenges of type 'jabber:x:data' MUST always contain a data form (an 'x'
element with type 'form') as defined by &xep0004;.
</p>
<example caption='Server issues a data form challenge'><![CDATA[
<challenge xmlns='urn:xmpp:register:0'
type='jabber:x:data'>
<x xmlns='jabber:x:data' type='form'>
<title>Chat Registration</title>
<instructions>
Please provide the following information
to sign up to view our chat rooms!
</instructions>
<field type='hidden' var='FORM_TYPE'>
<value>urn:xmpp:register:0</value>
</field>
<field type='text-single' label='Given Name' var='first'/>
<field type='text-single' label='Family Name' var='last'/>
<field type='text-single' label='Nickname' var='nick'>
<required/>
</field>
<field type='text-single' label='Recovery Email Address' var='email'>
<required/>
</field>
</x>
</challenge>]]></example>
<p>
The response to a "jabber:x:data" challenge MUST be a form submission (an
'x' element of type 'submit').
For instance, to reply to the data form challenge from the previous example
a client might send:
</p>
<example caption='Client submits a data form in response to the challenge'><![CDATA[
<response xmlns='urn:xmpp:register:0'>
<x xmlns='jabber:x:data' type='submit'>
<field type='hidden' var='FORM_TYPE'>
<value>urn:xmpp:register:0</value>
</field>
<field type='text-single' label='Given Name' var='first'>
<value>Juliet</value>
</field>
<field type='text-single' label='Family Name' var='last'>
<value>Capulet</value>
</field>
<field type='text-single' label='Nickname' var='nick'>
<value>Jule</value>
</field>
<field type='text-single' label='Recovery Email Address' var='email'>
<value>juliet@capulet.com</value>
</field>
</x>
</response>]]></example>
</section2>
<section2 topic='Out of Band Data' anchor='oob'>
<p>
Challenges of type "jabber:x:oob" MUST contain an &lt;x/&gt; element
qualified by the "jabber:x:oob" namespace as defined in &xep0066;.
</p>
<example caption='Server issues an OOB challenge'><![CDATA[
<challenge xmlns='urn:xmpp:register:0'
type='jabber:x:oob'>
<x xmlns='jabber:x:oob'>
<url>http://example.net/login?token=foo</url>
</x>
</challenge>]]></example>
<p>
If the client sends a response to the OOB challenge it MUST be empty.
</p>
<example caption='Client acknowledges the OOB challenge'><![CDATA[
<response xmlns='urn:xmpp:register:0'/>]]></example>
</section2>
<section2 topic='SASL' anchor='sasl'>
<p>
Servers can support changing passwords by providing a reset flow
containing a SASL challenge.
The SASL challenge re-uses the SASL profile from &rfc6120;.
The server begins by sending the mechanisms list, and the client responds
by selecting a mechanism and possibly including initial data.
Each step in the SASL process is issued as a new SASL challenge.
</p>
<example caption='SASL challenge flow'><![CDATA[
<!-- Server -->
<challenge xmlns='urn:xmpp:register:0'
type='urn:ietf:params:xml:ns:xmpp-sasl'>
<mechanisms xmlns='urn:ietf:params:xml:ns:xmpp-sasl'>
<mechanism>EXTERNAL</mechanism>
<mechanism>SCRAM-SHA-1-PLUS</mechanism>
<mechanism>SCRAM-SHA-1</mechanism>
<mechanism>PLAIN</mechanism>
</mechanisms>
</challenge>
<!-- Client -->
<response xmlns='urn:xmpp:register:0'>
<auth xmlns="urn:ietf:params:xml:ns:xmpp-sasl"
mechanism="SCRAM-SHA-1">
biwsbj1qdWxpZXQscj1vTXNUQUF3QUFBQU1BQUFBTlAwVEFBQUFBQUJQVTBBQQ==
</auth>
</response>
<!-- Server -->
<challenge xmlns='urn:xmpp:register:0'
type='urn:ietf:params:xml:ns:xmpp-sasl'>
<challenge xmlns="urn:ietf:params:xml:ns:xmpp-sasl">
cj1vTXNUQUF3QUFBQU1BQUFBTlAwVEFBQUFBQUJQVTBBQWUxMjQ2OTViLTY5Y
TktNGRlNi05YzMwLWI1MWIzODA4YzU5ZSxzPU5qaGtZVE0wTURndE5HWTBaaT
AwTmpkbUxUa3hNbVV0TkRsbU5UTm1ORE5rTURNeixpPTQwOTY=
</challenge>
</challenge>
<!-- Client -->
<response xmlns='urn:xmpp:register:0'>
<response xmlns="urn:ietf:params:xml:ns:xmpp-sasl">
Yz1iaXdzLHI9b01zVEFBd0FBQUFNQUFBQU5QMFRBQUFBQUFCUFUwQUFlMTI0N
jk1Yi02OWE5LTRkZTYtOWMzMC1iNTFiMzgwOGM1OWUscD1VQTU3dE0vU3ZwQV
RCa0gyRlhzMFdEWHZKWXc9
</response>
</response>]]></example>
</section2>
</section1>
<section1 topic='Internationalization Considerations' anchor='i18n'>
<p>
When providing instructions in a data form, or in the name element of a
registration or recovery flow, the server SHOULD use the language specified
in the XML stream's current xml:lang, or the closest language for which the
server has a translation (eg. based on mutual intelligibility between
scripts and languages).
</p>
<p>
For more information about language tags and matching, see &bcp47;.
</p>
</section1>
<section1 topic='Security Considerations' anchor='security'>
<p>
Servers that allow in-band registration need to take measures to prevent
abuse.
Common techniques to prevent spam registrations include displaying CAPTCHAs
or requiring proof-of-possession of a valid email address or telephone
number by sending a unique code (e.g. an HMAC that can later be verified as
having originated at the server) to the users email and requiring that they
enter the code before continuing.
Servers that do not take such measures risk being black listed by other
servers in the network.
</p>
</section1>
<section1 topic='IANA Considerations' anchor='iana'>
<p>This document requires no interaction with &IANA;.</p>
</section1>
<section1 topic='XMPP Registrar Considerations' anchor='registrar'>
<section2 topic='Protocol Namespaces' anchor='registrar-ns'>
<p>This specification defines the following XML namespace:</p>
<ul>
<li>urn:xmpp:register:0</li>
</ul>
<p>
Upon advancement of this specification from a status of Experimental to a
status of Draft, the &REGISTRAR; shall add the foregoing namespace to the
registries located at &STREAMFEATURES;, and &DISCOFEATURES; as described
in Section 4 of &xep0053;.
</p>
<code caption='Service Discovery Features Registry Submission'><![CDATA[
<var>
<name>urn:xmpp:register:0</name>
<desc>Support for in band registration and password reset.</desc>
<doc>&xep0389;</doc>
</var>]]></code>
<code caption='Stream Features Registry Submission'><![CDATA[
<feature>
<ns>urn:xmpp:register:0</ns>
<name>Extensible In-Band Registration</name>
<element>register</element>
<desc>Support for in band registration and password reset.</desc>
<doc>&xep0389;</doc>
</feature>]]></code>
<p>
The &REGISTRAR; shall also add the foregoing namespace to the Jabber/XMPP
Protocol Namespaces Registry located at &NAMESPACES;.
Upon advancement of this specification from a status of Experimental to a
status of Draft, the &REGISTRAR; shall remove the provisional status from
this registry entry.
</p>
<code caption='Jabber/XMPP Protocol Namespaces Registry Submission'><![CDATA[
<ns>
<name>urn:xmpp:register:0</name>
<doc>&xep0389;</doc>
<status>provisional</status>
</ns>]]></code>
</section2>
<section2 topic='IBR Challenges Registry' anchor='registrar-challenges'>
<p>
The XMPP Registrar shall maintain a registry of IBR challenges.
Challenges defined within the XEP series MUST be registered with the XMPP
Registrar.
</p>
&REGPROCESS;
<code><![CDATA[
<challenge>
<type>A name that uniquely identifies the challenge.</type>
<desc>A natural-language summary of the challenge.</desc>
<doc>
The document (or documents) in which the IBR challenge and its payload are
defined.
</doc>
</challenge>]]></code>
<p>
For an example registration, see the next section.
</p>
</section2>
<section2 topic='Challenge Types' anchor='registrar-ibrchallenges'>
<p>This specification defines the following IBR challenge:</p>
<ul>
<li>jabber:x:data</li>
<li>jabber:x:oob</li>
</ul>
<p>
Upon advancement of this specification from a status of Experimental to a
status of Draft, the &REGISTRAR; shall add the following definitions to
the IBR challenges registry, as described in this document:
</p>
<code caption='IBR Challenges Registry Submission for Data Forms'><![CDATA[
<challenge>
<type>jabber:x:data</type>
<desc>Requests that the client fill out an XEP-0004 data form.</desc>
<doc>&xep0389;, &xep0004;</doc>
</challenge>]]></code>
<code caption='IBR Challenges Registry Submission for OOB Data'><![CDATA[
<challenge>
<type>jabber:x:oob</type>
<desc>Requests that the client execute a URI.</desc>
<doc>&xep0066;</doc>
</challenge>]]></code>
</section2>
<section2 topic='Namespace Versioning' anchor='registrar-versioning'>
&NSVER;
</section2>
</section1>
</xep>