Traditional telephony systems use Dual Tone Multi-Frequency (DTMF) for dialing and to issue commands such as those used in Interactive Voice Response (IVR) applications. Internet telephony systems also use DTMF tones for interoperability with the public switched telephone network (PSTN). XMPP clients that use &jep0166; for voice chat (see &jep0167;) MUST use the protocol described in this document if they wish to support DTMF.

The format for the XML DTMF format is as follows:

The <dtmf/> element SHOULD possess one 'action' attribute, which MUST be either "button-up" or "button-down", specifying whether the button is being depressed or released. This allows DTMF tones to be reconstructed in real-time. If the 'action' attribute is not included, the recipient MUST assume this to be a "button-down" event, and imply a "button-up" event after a reasonable timeout (100 milliseconds is RECOMMENDED) or when another DMTF event is received.

Unless, the 'action' attribute is 'button-up', the <dmtf/> element MUST possess a 'code' attribute that specifies the tone to be generated. The value of the 'code' attribute SHOULD be one the following characters: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, #, and * -- however, the characters A, B, C, and D MAY be sent as well. Although A, B, C, and D were originally defined as part of DTMF, they were never deployed to telephony consumers and were used only for control purposes at private branch exchanges (PBXs) and central office operator stations; however, they are used in certain non-telephony applications of DTMF, such as ham radio.

The <dtmf> element SHOULD be sent as the payload of a Jingle content-info message as illustrated in the following example.

Some applications may want to stream Jingle voice RTP directly to a non-XMPP entity, such as a SIP phone. In this scenario, DTMF needs to be sent in the content channel. Jingle DTMF allows to Jingle entities to negotiate whether to send RTP over the XMPP signalling channel as described above, or over the content channel, using RFC 2833.

To request that the voice session switches to RFC 2833, a client sends a <dtmf-method/> element, qualified by the 'http://jabber.org/protocol/info/dmtf' namespace as the payload of a Jingle content-info message:

The dtmf-method element MUST contain one 'method' attribute, the value of which SHOULD be either 'rtp' or 'xmpp'.

If the recipient supports the requested DTMF method, it SHOULD send an empty IQ result:

If the recipient does not supoprt the requested DTMF method, it MUST reply with a lt;feature-not-implemented/> error with a DTMF-specific error condition of <unsupported-dtmf-method/>:

This document introduces no known security vulnerabilities.

This JEP requires no interaction with &IANA;.