%ents; ]>
Jingle RTP Feedback Negotiation This specification defines an XMPP extension to negotiate the use of the Extended RTP Profile for Real-time Transport Control Protocol (RTCP)-Based Feedback (RTP/AVPF) with Jingle RTP sessions &LEGALNOTICE; 0293 Draft Standards Track Standards Council XEP-0167 RFC 4585 NOT_YET_ASSIGNED http://xmpp.org/schemas/jingle-apps-rtp-rtcp-fb.xsd jingle Olivier CrĂȘte olivier.crete@collabora.co.uk olivier.crete@collabora.co.uk 1.0.1 2018-11-03 pep Fix a bunch of typos, batch-style. 1.0 2015-08-11 XEP Editor (mam)

Advanced to Draft per a vote of the XMPP Council.

0.3 2015-04-29 ph

Address council LC feedback.

0.2 2015-03-25 ph

Added XML Schema; Updated based on last-call feedback.

0.1 2011-03-24 psa

Initial published version.

0.0.1 2011-01-10 oc

First draft.

This documents specifies how to negotiate the use of the Extended RTP Profile for Real-time Transport Control Protocol (RTCP)-Based Feedback (RTP/AVPF) with Jingle RTP sessions.

The Jingle extension defined herein is designed to meet the following requirements:

  1. Enable negotiations of the required parameters for the transmissions of RTP Feedback messages as defined in &rfc4585;.
  2. Map these parameters to Session Description Protocol (SDP; see &rfc4566;) to enable interoperability.

This specification defines two new elements, <rtcp-fb/> and <rtcp-fb-trr-int/>, that can be inserted in the <description/> or the <payload-type/> elements of &xep0167;. The presence of any of these elements in a content's description means that the RTP/AVPF profile should be used for the whole content. If any of these elements are inside the <payload-type/> element, the parameters specified apply only to that payload type, if they are directly inside the <description/> tag, then the specified parameters apply to the whole content.

The attributes of the <rtcp-fb/> element are:

Attribute Description Inclusion Possible values
type The type of feedback REQUIRED ack, nack, ccm, app, etc..
subtype The subtype (depends on the type) OPTIONAL (possibly REQUIRED depending on the type) ack: rpsi, app; nack: sli, pli, rpsi, app, rai; ccm: fir, tmmbr, tstr, vbcm; app: depends on the application;

Any type or subtype of feedback message that requires extra parameters in the a=b form can use the <parameter/> element to describe it. Any other form of parameter can be stored as the 'key' attribute in a parameter element with an empty value.

Note: this overlaps with the subtype attribute. If there is only one parameter, use the subtype. The only known example where this is required is ccm.

The element <rtcp-fb-trr-int/> is used to specify the minimum interval between two Regular (full compound) RTCP packets in milliseconds for this media session. It corresponds to the "a=rtcp-fb:* trr-int" line in SDP. The attributes of the <rtcp-fb-trr-int/> element are:

Attribute Description Inclusion Possible values
value Number of milliseconds between regular RTCP reports REQUIRED 0 to MAXUINT (default to 0)

Feedback messages are negotiated along side the codecs. They follow the same Offer/Answer mechanism based on SDP Offer/Answer. The initiator signals which feedback messages it wants to send or receive in the the <session-initiate/> iq stanza. If the responder does not understand the type or subtype of a feedback message, it MUST remove the element from the reply. If the responder does not wish to provide or receive some kind of feedback, it MUST remove the relevant element. It MUST then send the remaining elements it wants to keep as-is without modifying them in the <session-accept/>

To conform with the negotiation rules outlined in RFC 4585 Section 4, the responder MUST send any <rtcp-fb/> element as-is if it accepts it. It MUST NOT change any parameter. It MUST NOT add any <rtcp-fb/> element that was not offered by the initiator. It MUST NOT modify the 'value' of any <rtcp-fb-trr-int/> element. It can only remove the <rtcp-fb-trr-int/> element or reject the content. If all the feedback messages are removed but the responder wants to stay in the RTP/AVPF profile, it MUST put a <rtcp-fb-trr-int/> element with the same 'value' that it received from the intiator, if the initiator did not provide a <rtcp-fb-trr-int/> element, then this value is "0".

Example negotiation where the initiator requests Packet Loss Indications (pli) as defined in RFC 4585 on both H.263 and H.264, but also requests Slice Loss Indications for H.264 with a minimum interval between regular full compound RTCP packets of 100 milliseconds.

]]>

Example reply where the responder rejects the "sli" but accepts the "pli".

]]>

Another reply to the same request where the responder wishes to stay in the AVPF profile but rejects all specific feedback messages by using the <rtcp-fb-trr-int/> with the default value.

]]>

The <rtcp-fb/> element maps to the a:rtcp-fb= SDP line with the exception of the 'trr-int' parameter which is mapped into its own element (<rtcp-fb-trr-int/>) in XMPP. The payload types are also not explicitly written in the <rtcp-fb/> and <rtcp-fb-trr-int/> elements. Instead, each payload type has its own set of <rtcp-fb/> and <rtcp-fb-trr-int/> elements if they do not apply to the whole content.

Example conversion of a sample fragment of a SDP containing an audio session using the RTP/AVP profile for audio and the RTP/AVPF profile for video:

action='session-initiate' initiator='romeo@montague.lit/orchard' sid='a73sjjvkla37jfea'> ]]>

To advertise its support for Extended RTCP Feedback in Jingle RTP Sessions and a minimum interval between regular RTCP packets, when replying to &xep0030; information requests an entity MUST return the following features:

  1. URNs for any version of this protocol that the entity supports -- e.g., "urn:xmpp:jingle:apps:rtp:rtcp-fb:0" for the current version

An example follows:

]]> ]]>

This document requires no interaction with the Internet Assigned Numbers Authority (IANA).

This specification defines the following XML namespaces:

  • urn:xmpp:jingle:apps:rtp:rtcp-fb:0

The ®ISTRAR; includes the foregoing namespaces in its registry at &NAMESPACES;, as governed by &xep0053;.

&NSVER;
The protocol documented by this schema is defined in XEP-0293: http://www.xmpp.org/extensions/xep-0293.html ]]>

Thanks to Youness Alaoui for his feedback.