<p>Since the inception of the &XSF;, the &EDITOR; has been Peter Saint-Andre. However, if he gets hit by a bus or is replaced by someone else, this document might prove useful.</p>
<p>The XMPP Extensions Editor (or, for short, XEP Editor) manages the XMPP extensions process as defined in &xep0001;. In addition, the XEP Editor functions as the XMPP Registrar as defined in &xep0053;. Read those documents first, since this README focuses on mechanics instead of philosophy.</p>
<li>Send a reply to the author(s) in order to verify that, if the proposal is accepted, they will cede rights to the protocol in accordance with the XSF's IPR policy <linkurl='http://xmpp.org/extensions/ipr-policy.shtml'>http://xmpp.org/extensions/ipr-policy.shtml</link>.</li>
<li>Wait until the Council decides whether to accept the proposal as a XEP (this might involve poking the Council Chair, attending Council meetings, and monitoring the Council discussion list).</li>
<li>If rejected, retain the XML and HTML files in the "inbox".</li>
<li>Run the "gen.py" script on the webserver.</li>
<li>Run the "archive.sh" script, which copies this published version to <linkurl='http://xmpp.org/extensions/attic/'>http://xmpp.org/extensions/attic/</link>.</li>
<li>Run the "announce.py" script on the webserver (see note about <linkurl='#lists'>List Administration</link>).</li>
<p>Once a XEP has been published, it will be periodically updated in SVN, and sometimes those changes are significant enough to warrant a new version (e.g., version 0.2 after 0.1). Often a request to release a new version will come from the document author, sometimes from the Council (e.g., after the XEP has reached version 1.0 or version 2.0). Here is how to update a XEP.</p>
<li>Run the "gen.py" script on the webserver.</li>
<li>Run the "archive.sh" script, which copies this published version to <linkurl='http://xmpp.org/extensions/attic/'>http://xmpp.org/extensions/attic/</link>.</li>
<li>Run the "announce.py" script on the webserver (see note about <linkurl='#lists'>List Administration</link>).</li>
<p>The status of a XEP shall be automatically changed to Deferred if a new version has not been released in 12 months, except if the XEP is actively in the Council queue for consideration of issuance of a Last Call. Here is the process.</p>
<li>Run the "gen.py" script on the webserver.</li>
<li>Run the "archive.sh" script, which copies this published version to <linkurl='http://xmpp.org/extensions/attic/'>http://xmpp.org/extensions/attic/</link>.</li>
<li>Modify the <abstract/> element with appropriate content (see existing Retracted XEPs).</li>
<li>Add a new revision block with an incremented version number, explaining that the XEP has been Retracted and why (see existing Retracted XEPs).</li>
<li>Run the "gen.py" script on the webserver.</li>
<li>Run the "archive.sh" script, which copies this published version to <linkurl='http://xmpp.org/extensions/attic/'>http://xmpp.org/extensions/attic/</link>.</li>
<li>Run the "announce.py" script on the webserver (see note about <linkurl='#lists'>List Administration</link>).</li>
<li>Receive notice from the Council Chair that a Last Call shall be issued.</li>
<li>Determine the ending date, which must be at least 10 days in the future and usually is 2 weeks (sometimes 3 weeks if much discussion is expected).</li>
<li>Change the <status/> element to "Proposed" in the XML file.</li>
<li>Run the "gen.py" script on the webserver.</li>
<li>Run the "archive.sh" script, which copies this published version to <linkurl='http://xmpp.org/extensions/attic/'>http://xmpp.org/extensions/attic/</link>.</li>
<li>Add the protocol namespace (if any) to the protocol namespaces registry and complete any other XMPP Registrar actions called for in the XEP (see below).</li>
<li>Run the "announce.py" script on the webserver (see note about <linkurl='#lists'>List Administration</link>).</li>
<li>Update the protocol pages at <linkurl='http://xmpp.org/protocols/'>http://xmpp.org/protocols/</link> to reflect advancement of the XEP.</li>
</ol>
</section2>
<section2topic='Deprecating a XEP'anchor='deprecating'>
<p>The Council can decide to change the status of a XEP to Deprecated (e.g., when a new technology has been developed to supersede the old technology). Here is the process:</p>
<ol>
<li>Increment the version number.</li>
<li>Change the <status/> element to "Deprecated" in the XML file.</li>
<li>If instructed to do so by the Council, add an <expires/> element to the header.</li>
<li>Add a <spec/> child to the <supersededby/> element, pointing to the specification that supersedes this one.</li>
<li>Add a pointer to the superseding spec in the abstract and a new first paragraph of the XEP.</li>
<li>Check your changes into SVN.</li>
<li>Update SVN on the webserver.</li>
<li>Run the "gen.py" script on the webserver.</li>
<li>Run the "archive.sh" script, which copies this published version to <linkurl='http://xmpp.org/extensions/attic/'>http://xmpp.org/extensions/attic/</link>.</li>
<section2topic='Obsoleting a XEP'anchor='obsoleting'>
<p>The Council can decide to change the status of a XEP from Deprecated to Obsolete. Here is the process:</p>
<ol>
<li>Increment the version number.</li>
<li>Change the <status/> element to "Obsolete" in the XML file.</li>
<li>If the file includes an <expires/> element in the header, remove it.</li>
<li>If appropriate, add a <spec/> child to the <supersededby/> element, pointing to the specification that supersedes this one.</li>
<li>If appropriate, add a pointer to the superseding spec in the abstract and a new first paragraph of the XEP.</li>
<li>Check your changes into SVN.</li>
<li>Update SVN on the webserver.</li>
<li>Run the "gen.py" script on the webserver.</li>
<li>Run the "archive.sh" script, which copies this published version to <linkurl='http://xmpp.org/extensions/attic/'>http://xmpp.org/extensions/attic/</link>.</li>
<li>Run the "announce.py" script on the webserver.</li>
<p>At any time (even after a XEP has advanced to Draft or Final), it is appropriate for the XEP Editor to correct small errors in XEPs (typographical errors, XML errors in examples, etc.).</p>
<p>However, care must be taken in editing Draft and Final XEPs, because any material changes to such specifications need to be approved by the XMPP Council. See <cite>XEP-0001</cite> for details.</p>
<p>The XEP Editor can choose to perform more advanced maintenance of XEPs, such as validation of schemas, checking of examples, and copy editing in accordance with the styleguide in <cite>XEP-0143</cite>. Such work is best done while a XEP is still Experimental.</p>
<p>XEPs are discussed on the standards@xmpp.org email list, about which information is available at <<linkurl='http://mail.jabber.org/mailman/listinfo/standards'>http://mail.jabber.org/mailman/listinfo/standards</link>>. Traditionally the XEP Editor acts as an administrator for this list. In particular, email from editor@xmpp.org is held for approval on this list to prevent spammers from sending fake emails from the Editor. Before running the "announce.py" script, empty the queue of messages held for moderation; after running the script, approve the message generated by that script so that it is sent to the list.</p>
</section2>
<section2topic='Radar Page'anchor='radar'>
<p>The XEP Editor maintains a "radar page" at <linkurl='http://wiki.xmpp.org/web/Radar'>http://wiki.xmpp.org/web/Radar</link>, which provides information about XEPs that are in the following states:</p>
<ul>
<li>Active, Draft, and Final XEPs that are under revision.</li>
<li>Draft XEPs that are undergoing a Call for Experience in preparation for advancement to Final.</li>
<li>Experimental XEPs that are undergoing a Last Call in preparation for advancement to Draft (or Active).</li>
<li>Experimental XEPs that are due to be automatically changed to Deferred because they have not been updated in 12+ months.</li>
</ul>
<p>The radar page is used by the Chair of the XMPP Council in preparing agendas for Council meetings.</p>
<p>Registry files are contained in the 'registry' directory. In general, there are several files that might need to be updated when a XEP advances to Active or Draft. In particular, most XEPs specify one or more protocol namespaces, which need to be added to the namespaces.xml file in the 'registry' directory. Refer to the list of registries at http://xmpp.org/registrar/ in order to determine which other registries might need to be updated. The reg.ent file will probably need to be updated as well. Once the Registrar actions have been completed, update the text of the XEP's XMPP Registrar Considerations section accordingly (e.g., to change "shall include" to "includes").</p>
<p>A XEP might call for one or more new registries to be created. If so, carefully review the XMPP Registrar Considerations section of the XEP before it advances to Draft or Active in order to provide appropriate feedback to the XEP author. (Alternatively, make the changes directly in the XEP file in consultation with the author.)</p>
<p>When creating a new registry, it is best to copy the DTD, XML, and XSL files for an existing registry, then modify them in accordance with the definition of the new registry in the relevant XEP. The gen.sh script will need to be updated to reflect the existence of the new registry, as will the index file for the http://xmpp.org/registrar/ web page.</p>
<p>Check all your changes into SVN, update the editor's SVN directory on the webserver, run the gen.sh script to update the XMPP Registrar web pages, and run the announce.py script to send an announcement to the Standards list (see note about <linkurl='#lists'>List Administration</link>).</p>
</section2>
<section2topic='Updating an Existing Registry'anchor='reg-update'>
<p>New versions of XEPs might provide modified registry data. The XEP Editor needs to be aware of changes to Draft and Final XEPs in order to make appropriate updates to existing registries. The registry itself shall not be changed until the new XEP version is approved by the XMPP Council.</p>
<p>The XMPP Registrar also periodically receives requests for additions to existing registrations outside of XEPs, either directly to registrar@xmpp.org or indirectly via standards@xmpp.org list. If the Registrar receives such a request directly, it shall send an email about the proposed registration to the standards@xmpp.org for public comment. If no objections are raised within a reasonable period of time, the Registrar shall update the relevant registry accordingly.</p>
<p>In order to convert XML files into HTML and other formats, the XEP Editor currently uses the xsltproc tool, which is part of libxml2 (created by Daniel Veillard). This tool is extremely handy and it is recommended that use of xsltproc be continued, especially since the shell scripts (described below) make calls to xsltproc.</p>
<p>Most of the "magic" behind creating the HTML-formatted XEPs, as well as the IETF-style reference files, is perfomed by XSLT stylesheets. The main file here is xep.xsl, although ref.xsl is used to create the reference files. A future version of this README might explain these files in more depth.</p>
<p>The xep.ent file contains handy references that can be incorporated into any XEP XML document, thus providing a centralized location for various document references. The XEP Editor keeps this file up to date (e.g., by adding all new XEPs to it), and should be the only person who makes changes to the file.</p>
<p>This script announces a new version of a XEP by sending a message to standards@xmpp.org (see note about <linkurl='#lists'>List Administration</link>).</p>
</li>
<li>
<p>deferred.py</p>
<p>This script updates the database and sends a message to standards@xmpp.org when the status of a XEP is changed to Deferred. Before running this script, make sure that you modify the <status/> element in the XEP itself and run the gen.py shell script.</p>
<p>This script converts one XEP XML file into HTML, and updates the XEP "database". Run this script before announcing a new version. This script can also be used for minor edits to the current version.</p>
<p>This script announces availability of a new "proto-XEP" (i.e., a document not yet accepted as a XEP by the XMPP Council) by sending a message to standards@xmpp.org. Before running this script, place the new proto-XEP so that it is available at http://xmpp.org/extensions/inbox/ (normally this is done by running 'xsltproc inbox/docname.xml > /var/www/vhosts/xmpp.org/extensions/inbox/docname.html' from the editor's working SVN directory on the webserver).</p>
<p>This script converts all XEP XML files into HTML. Use this if the xep.xsl file changes in ways that affect all XEPs. But make sure that SVN is synced up first -- you don't want to be publishing interim versions of XEPs!</p>
