<abstract>This document defines a Jingle transport method that results in sending data between two entities using the Interactive Connectivity Establishment (ICE) methodology.</abstract>
<remark><p>Updated to track ICE-12; corrected service discovery process; completed editorial review; removed mention of DTMF, which is for audio only.</p></remark>
<p>&xep0166; defines a framework for negotiating and managing out-of-band data sessions over XMPP. In order to provide a flexible framework, the base Jingle specification defines neither data transport methods nor content formats, leaving that up to separate specifications. The current document defines a transport method for establishing and managing data connections between XMPP entities, using the &ice; methodology currently being developed within the IETF.</p>
<p>The process for ICE negotiation is largely the same in Jingle as it is in <cite>draft-ietf-mmusic-ice</cite>. There are several differences:</p>
<li>In Jingle, each candidate transport is sent in a separate IQ exchange (rather than sending all candidates at once as in <cite>draft-ietf-mmusic-ice</cite>); this approach takes advantage of the request-response semantics of the XMPP &IQ; stanza type and enables the parties to send higher-priority candidates earlier in the negotiation.</li>
<li>Syntax from the Session Description Protocol (see &rfc4566;) is mapped to an XML syntax suitable for sending over the XMPP signalling channel.</li>
<p><em>Note: This document depends on the IETF's Interactive Connectivity Establishment (ICE) specification, which is a work in progress. Every effort has been made to keep this document synchronized with <cite>draft-ietf-mmusic-ice</cite>, for which the latest published version is 12 (hereafter referred to as "&icecur;"). The interested reader is referred to the &icecur; for a detailed description of the ICE methodology, which for the most part this document merely maps to XMPP syntax.</em></p>
<p>The Jingle transport method defined herein is designed to meet the following requirements:</p>
<ol>
<li>Make it possible to establish and manage out-of-band connections between two XMPP entities, even if they are behind Network Address Translators (NATs) or firewalls.</li>
<li>Make it relatively easy to implement support in standard Jabber/XMPP clients.</li>
<li>Where communication with non-XMPP entities is needed, push as much complexity as possible onto server-side gateways between the XMPP network and the non-XMPP network.</li>
<p>In order for the initiator in a Jingle exchange to start the negotiation, it MUST send a Jingle "session-initiate" stanza as described in <cite>XEP-0166</cite>. This stanza MUST include at least one transport method. If the initiator wishes to negotiate the ICE transport, it MUST include an empty &TRANSPORT; child element qualified by the 'http://jabber.org/protocol/jingle/transport/ice' namespace.</p>
<p>If the responder provisionally accepts the session initiation request as shown above, both initiator and responder MUST immediately negotiate connectivity over the ICE transport by exchanging XML-formatted candidate transports for the channel. This negotiation proceeds immediately in order to maximize the possibility that media can be exchanged as quickly as possible. <note>Concurrent with negotiation of the ICE candidates, it is possible for the initiator and responder to negotiate which content types the session will include, which transport methods will be tried for each content type, etc. Those negotiation flows are shown in <cite>XEP-0166</cite>. This document specifies only negotiation of the ICE transport method.</note></p>
<td>An index, starting at 0, that enables the parties to keep track of updates to the candidate throughout the life of the session</td>
<td>N/A</td>
<td>0</td>
</tr>
<tr>
<td>ip</td>
<td>The Internet Protocol (IP) address for the candidate transport mechanism; this may be either an IPv4 address or an IPv6 address</td>
<td>IP Address value in a=candidate line</td>
<td>10.0.1.1</td>
</tr>
<tr>
<td>network</td>
<td>An index, starting at 0, referencing which network this candidate is on for a given peer (used for diagnostic purposes if the calling hardware has more than one Network Interface Card or NIC)</td>
<note>In accordance with the rules specified in Section 5.2 of &icecur;, the priority values shown in the examples within this document have been calculated as follows. The "type preference" for local candidates is stipulated to be "126" and for server reflexive candidates "66". The "local preference" for network 0 is stipulated to be "4096", for network 1 "2048", and for network 2 "1024".</note>
<td>The protocol to be used; allowable values are: "udp" (when standard &icecur; is used); "tcp", "tcp-act", and "tcp-pass" (when &ice-tcp; is used); and "ssltcp" (definition to follow)</td>
<td>Transport protocol field in a=candidate line</td>
<td>A Candidate Type as defined in &icecur;; the allowable values are "host" for host candidates, "srflx" for server reflexive candidates, "prflx" for peer reflexive candidates, and "relay" for relayed candidates</td>
<p>The first step in negotiating connectivity is for each client to immediately begin sending candidate transport methods to the other client. These candidates SHOULD be gathered by following the procedure specified in Section 5.1 of &icecur; and prioritized by following the procedure specified in Section 5.2 of &icecur;. Each candidate MUST be sent in a &JINGLE; element with an action of "transport-info".</p>
<p>If the responder receives and can successfully process a given candidate, it returns an IQ-result (if not, for example because the candidate data is improperly formatted, it returns an error).</p>
<p>Note well that the responder is only indicating receipt of the candidate, not telling the initiator that the candidate will be used.</p>
<p>The initiator keeps sending candidates, one after the other (without stopping to receive an acknowledgement of receipt from the responder for each candidate) until it has exhausted its supply of possible or desirable candidate transports. (Because certain candidates may be more "expensive" in terms of bandwidth or processing power, the initiator may not want to advertise their existence unless necessary.) For each candidate, the responder acknowledges receipt.</p>
<p>At the same time (i.e., immediately after provisionally accepting the session, not waiting for the initiator to begin or finish sending candidates), the responder also begins sending candidates that may work for it. As above, the initiator acknowledges receipt of the candidates.</p>
<p>As the initiator and responder receive candidates, they probe the various candidate transports for connectivity. In performing these connectivity checks, client SHOULD follow the procedure specified in Section 7 of &icecur;.</p>
<section2topic='Acceptance of Successful Candidate'anchor='protocol-acceptance'>
<p>If, based on STUN connectivity checks, the responder determines that it will be able to establish a connection using a given candidate, it sends a &JINGLE; element with an action of 'transport-accept' to the initiator, specifying the candidate that succeeded:</p>
<examplecaption="Juliet Definitively Accepts the Successful Candidate"><