<li>Replaced boolean send_item_subscribe node configuration option with more comprehensive send_last_published_item option per list discussion</li>
<li>Added deliver_notifications node configuration option to enable quiet nodes without notifications, if desired enabling pull-model item retrieval only.</li>
<li>Modified subscription and affiliation retrieval to return empty element if no results.</li>
</ul>
</remark>
</revision>
<revision>
<version>1.8</version>
<date>2006-06-27</date>
<initials>psa</initials>
<remark>
<ul>
<li>Defined five access models: open, presence, roster, authorize, and whitelist</li>
<li>Renamed pubsub#subscription_model feature to pubsub#access_model</li>
<li>Separated affiliations retrieval from subscriptions retrieval</li>
<li>Removed subscription information from affiliations management</li>
<li>Changed <entity/> element to <subscription/> element in response to subscription request</li>
<li>Clarified batch processing of item publication and item deletion</li>
<li>Added basic example to introduction</li>
<li>More fully specified node creation flows</li>
<li>More fully specified recommended behavior for caching last published item, including use of jabber:x:delay protocol</li>
<li>Specified that semantic meaning of NodeIDs must not be used to encapsulate hierarchy</li>
<li>More fully specified error conditions</li>
<li>Changed some feature-related conditions to <unsupported/> plus feature attribute</li>
<li>Changed some error conditions from <not-authorized/> to <forbidden/></li>
<li>Harmonized error conditions for unsubscribe if entity is not subscribed (unexpected-request rather than not-found)</li>
<li>Further defined error conditions related to item publication</li>
<li>Specified structure of <affiliations/>, <delete/>, <purge/>, and <subscriptions/> elements qualified by pubsub#owner namespace</li>
<li>Changed retrieval of default configuration options to use <default/> element, not <configure/> element</li>
<li>Allowed caching of last published item</li>
<li>Added pubsub#deliver subscription option</li>
<li>Added meta-data fields for pubsub#owners and pubsub#contact</li>
<li>Changed element for retrieval of default node configuration options from <configure/> to <default/> to prevent ambiguity related to configuration of root collection node</li>
<li>Specified conformance with Resourceprep for nodes addressable as JIDs</li>
<li>Added pubsub#modify-affiliations feature</li>
<li>Added pubsub#digest_frequency field to subscribe_options FORM_TYPE</li>
<li>Added pubsub#roster_groups_allowed field to node_config FORM_TYPE</li>
<li>More clearly specified the requirements level (MUST, SHOULD, MAY) for each service discovery feature</li>
<li>Defined pubsub#include_body subscription option and the pubsub#body_xslt node configuration option to transform payload format into an XMPP message body, and clarified rules for inclusion of message bodies</li>
<li>Clarified nature of collections and association of a node to a collection</li>
<li>Specified that simultaneous subscriptions of type nodes and items are allowed to collection nodes</li>
<li>Added examples and further explanation of time-based and content-based subscriptions</li>
<li>Reinstated pubsub#subscribe feature (deleted in error)</li>
<li>Added type attribute for the <create/> and <configure/> elements to differentiate between leaf nodes and collection nodes</li>
<li>In Section 8.1.7, changed affiliations retrieval support to SHOULD and added pubsub#retrieve-affiliations feature</li>
<li>In Section 8.1.10, removed two duplicate examples</li>
<li>In Section 8.1.12, clarified relationship between normal disco#info data and node meta-data (which uses a service discovery extension)</li>
<li>In Section 8.2.4, specified that node purgation MUST result in one event notification, not a notification per item</li>
<li>In Section 8.1.8, further specified handling of SubIDs</li>
<li>Clarified nature of the pubsub#type field</li>
<li>Mentioned that the forbidden error should be returned in response to certain operations requested by an outcast</li>
<li>Corrected datatype of max_items attribute from xs:string to xs:positiveInteger</li>
<li>Corrected <requesting-entity-not-subscribed/> error to <not-subscribed/> since the subscribed JID need not be that of the requesting entity</li>
<li>Added service discovery features for more optional use cases: retracting items, purging nodes, deleting nodes</li>
<li>Updated relevant registries</li>
</ul>
</remark>
</revision>
<revision>
<version>1.6</version>
<date>2004-07-13</date>
<initials>pgm/psa</initials>
<remark><p>Added service discovery features for pubsub#meta-data, and pubsub#retrieve-items. Added pubsub#subscription_depth configuration option. Specified pubsub-specific error condition elements qualified by pubsub#errors namespace.</p></remark>
<remark><p>Fixed typos. Added more details to the section on collections. Added paragraph to create node use case to allow the service to change the requested node-id to something which it creates. Added text about bouncing publish requests when the request does not match the event-type for that node. Added disco features for the jabber registrar. Changed affiliation verbiage to allow publishers to remove any item. Tweaked verbiage for create node, eliminated extra example. Fully defined XMPP Registrar submissions. Corrected schemas.</p></remark>
<remark><p>Added subid syntax in a variety of places. Added more information about disco#info and disco#items support. Added more info about subscription options. Added collection information. Added implementation notes about subscription leases, and content-based pubsub services.</p></remark>
</revision>
<revision>
<version>1.3</version>
<date>2004-04-25</date>
<initials>psa</initials>
<remark><p>Editorial review; added one implementation note.</p></remark>
<remark><p>Per a vote of the Jabber Council, advanced status to Draft.</p></remark>
</revision>
<revision>
<version>0.16</version>
<date>2003-10-23</date>
<initials>pgm</initials>
<remark><p>Clarified JID addressing usage for nodes. Added specific MAY requirement for disco usage. Added sentence about implementations verifying that an entity has a subscription before getting the current items.</p></remark>
</revision>
<revision>
<version>0.15</version>
<date>2003-10-21</date>
<initials>pgm</initials>
<remark><p>Fixed invalid XML in examples for subscription deny/allow.</p></remark>
</revision>
<revision>
<version>0.14</version>
<date>2003-10-21</date>
<initials>pgm</initials>
<remark><p>Clarified restrictions on addressing nodes by JID. Added section on Approving and Denying Subscription Requests. Changed get-pending to use Ad-Hoc Commands. Changed semantics when sending in a form type='cancel' for pending subscriptions.</p></remark>
</revision>
<revision>
<version>0.13</version>
<date>2003-09-30</date>
<initials>pgm</initials>
<remark><p>Removed item as a possible child of subscribe and unsubscribe and pubsub in the schemas. Removed retract as a possible child of item in the pubsub#event schema. Added verbiage to requirements for addressing nodes either via JIDs or disco nodes.</p></remark>
<remark><p>Defined public vs. private nodes; described how changes to existing nodes might trigger meta-node events (e.g., configuration changes); changed <x/> to <event/> for #events namespace; added meta-data about meta-nodes; fully defined XMPP Registrar considerations.</p></remark>
<remark><p>Removed subscription notifications since they have inherent issues. Removed empty implementation note sub-section.</p></remark>
</revision>
<revision>
<version>0.10</version>
<date>2003-06-11</date>
<initials>pgm</initials>
<remark><p>Fixed error example when returning 501 from an items-get request. Added note about receiving subscription requests when an entity is already subscribed. Fixed some entity elements in various subscription examples. Many were missing the node attribute. Added subscription change notification verbiage and example. Added verbiage and example of subscription state notification being sent to the requesting entity. Added disco#items information for getting a list of item identifiers for a single node. Added verbiage for returning the current entity element when a curent subscriber attempts to subscribe again.</p></remark>
</revision>
<revision>
<version>0.9</version>
<date>2003-04-30</date>
<initials>pgm</initials>
<remark><p>Include JID attributes in the entity elements when receiving your affiliations. Changed error code 406 (which was wrong) to 404, which is correct. Changed many 405 errors to 401, and modified the error table to make it more implementable (rules are more concrete). Added subscribe-options element for indicating subscriptions may be configured.</p></remark>
<remark><p>Clarified the affiliations table and the semantics around subscribing and unsubscribing. Added protocol to get all of your affiliations in the service. Added protocol for services informing subscribers that configurable subscription options are available. Added protocol for obtaining existing node configuration settings and for concatenating configuration and node creation requests into a single stanza. Added meta-node implementation notes and specified the interaction with the XMPP Registrar and the meta NodeIDs. Added authorization notes to subscription options.</p></remark>
<remark><p>Clarified requirements around what affiliations must be supported. Moved requirements about specifying entities which can subscribe and publish out of the MUSTs to MAYs. Changed SHOULD to MAY when talking about allowing entities to create nodes. Added ability to send configuration requests in the same stanza as a creation request.</p></remark>
</revision>
<revision>
<version>0.6</version>
<date>2003-02-06</date>
<initials>pgm</initials>
<remark><p>Added more details and an example about publishing without NodeID. Added more implementation notes about NodeIDs and persistent storage.</p></remark>
</revision>
<revision>
<version>0.5</version>
<date>2003-01-22</date>
<initials>pgm</initials>
<remark><p>Fixed header for delete item example. Added examples showing subscribers being notified of deleted items. Added examples for notification of node deletion, and configuration for node deletion. Added Subscriber option semantics and examples. Added examples for 402 and 407 errors on subscribe and create respectively. Added clarification about ItemID handling to impl notes.</p></remark>
<remark><p>Clarified in-band and out-of-band configuration requirement. Added Delete Item privilege for all affiliations to the table. Added Delete item protocol for publishers and owners. Added 401 error case for subscribing to an illegal jid. Changed subscription request form. Added defaults to configuration form, and clarified role of the XMPP Registrar for the features show. Added text explaining the max_items attribute. Changed "last items" to "most recent items". Removed default configuration acceptance -- owners should just cancel. Added the notify_retract configuration option. Clarified error handling for affiliation modifications. </p></remark>
<remark><p>Added subscription attribute for entities. Removed subscriber from the affiliations table. Clarified configuration details. Clarified JabberID usages. Added XMPP Registrar Considerations. Added link to XEP-0068 about the FORM_TYPE element in subscription request notifications. Fixed some typos in examples. Added unsupported configuration namespace to example. Added a default configuration example. </p></remark>
<remark><p>Added numerous implementation notes; added get-pending action with regard to subscriptions; added error table; changed purge and delete to use IQ type='set'.</p></remark>
</revision>
<revision>
<version>0.1</version>
<date>2002-11-19</date>
<initials>pgm</initials>
<remark><p>Initial version.</p></remark>
</revision>
</header>
<section1topic='Introduction'anchor='intro'>
<section2topic='Overview'anchor='intro-overview'>
<p>As Jabber/XMPP technologies have matured, the need for a generic publish-subscribe ("pubsub") mechanism has arisen in a number of problem spaces. These include (but are not limited to): news feeds and content syndication, extended presence, avatar management, shared bookmarks, auction and trading systems, online catalogs, workflow systems, network management systems, NNTP gateways, profile management, and event notification.</p>
<p>In all of these domains, it is desirable for data communication to follow the classic "publish-subscribe" or "observer" design pattern: a person or application publishes information, and an event notification or the data itself is broadcasted to all authorized subscribers. In general, the relationship between the publisher and subscriber is mediated by a service that receives publication requests, broadcasts event notifications and/or the data itself to subscribers, and enables privileged entities to manage lists of people or applications that are authorized to publish or subscribe. In most pubsub services, the focal point for publication and subscription is a "topic" or "node" to which publishers send data and from which subscribers receive notifications and/or data. Additionally, some nodes may also maintain a history of events and provide other services that supplement the pure pubsub model.</p>
<p>This document defines a single, cohesive, generic protocol which all forms of pubsub can utilize. While compliant implementations are not required to implement all of the features defined herein, this document addresses most usages that may be requested of a pubsub service. Other specifications may define subsets of publish-subscribe for use in specialized contexts, but such profiles are out of scope for this document.</p>
<p>In order to motivate the discussion, we provide a simple, introductory example of a pubsub protocol flow.</p>
<p>Perhaps the most popular application of pubsub-like functionality is content syndication, which has become familiar from the RSS and Atom (&rfc4287;) feeds associated with weblogs, news sites, and other frequently-updated information available on the Internet. Consider the example of a weblog published by one of the Shakespearean characters typical of Jabber/XMPP protocol documentation. When this character authors a new weblog entry, his blogging software publishes the entry to a pubsub node hosted at a pubsub service:</p>
<examplecaption='Publisher Publishes a New Weblog Entry'><![CDATA[
<p>Naturally, many other protocol flows may be required in order to enable publication of items to a node (e.g., the publisher first needs to create the node and subscribers need to sign up for notifications). These protocol flows are fully described in the remainder of this document.</p>
<p>An even simpler example is that of a transient node that sends only notifications, which is the pure pubsub model:</p>
<p>The following terms are used throughout this document to refer to elements, objects, or actions that occur in the context of a pubsub service. (Note: Some of these terms are specified in greater detail within the body of this document.)</p>
<tablecaption='Publish-Subscribe Terms'>
<tr><td>Authorize Access Model</td><td>A node access model under which an entity can subscribe only through having a subscription request approved by a node owner (subscription requests are accepted but only provisionally) and only subscribers may retrieve items.</td></tr>
<tr><td>Collection Node</td><td>A type of node that contains nodes and/or other collections but no published items. Collections make it possible to represent hierarchial node structures.</td></tr>
<tr><td>Event</td><td>A change in the state of a node.</td></tr>
<tr><td>Instant Node</td><td>A node whose NodeID is automatically generated by a pubsub service.</td></tr>
<tr><td>Item</td><td>An XML fragment which is published to a node, thereby generating an event.</td></tr>
<tr><td>ItemID</td><td>A unique identifier for an item in the context of a specific node.</td></tr>
<tr><td>Leaf Node</td><td>A type of node that contains published items only. It is NOT a container for other nodes.</td></tr>
<tr><td>Node</td><td>A virtual location to which information can be published and from which event notifications and/or payloads can be received (in other pubsub systems, this may be labelled a "topic").</td></tr>
<tr><td>NodeID</td><td>The unique identifier for a node within the context of a pubsub service. The NodeID is either supplied by the node creator or generated by the pubsub service (if the node creator requests an Instant Node). The NodeID MAY have semantic meaning, but such meaning is OPTIONAL.</td></tr>
<tr><td>Notification</td><td>A message sent to a subscriber informing them of an event.</td></tr>
<tr><td>Outcast</td><td>An entity that is disallowed from subscribing or publishing to a node.</td></tr>
<tr><td>Owner</td><td>The manager of a node, of which there may be more than one; often but not necessarily the node creator.</td></tr>
<tr><td>Payload</td><td>The full data associated with an event rather than just the event notification itself.</td></tr>
<tr><td>Open Access Model</td><td>A node access model under which any entity may subscribe and retrieve items without approval.</td></tr>
<tr><td>Personal Eventing</td><td>A simplified subset of Publish-Subscribe for use in the context of instant messaging and presence applications, whereby each IM user's JID is a virtual pubsub service; for details, see &xep0163;.</td></tr>
<tr><td>Presence Access Model</td><td>A node access model under which any entity that is subscribed to the owner's presence with a subscription of type "from" or "both" (see &rfc3921;) may subscribe to the node and retrieve items from the node; this access model applies mainly to instant messaging systems.</td></tr>
<tr><td>Publisher</td><td>An entity that is allowed to publish items to a node.</td></tr>
<tr><td>Pubsub Service</td><td>An XMPP server or component that adheres to the protocol defined herein.</td></tr>
<tr><td>Roster Access Model</td><td>A node access model under which any entity that is subscribed to the owner's presence and in the specified roster group(s) may subscribe to the node and retrieve items from the node; this access model applies mainly to instant messaging systems.</td></tr>
<tr><td>Subscriber</td><td>An entity that is subscribed to a node.</td></tr>
<tr><td>Whitelist Access Model</td><td>A node access model under which an entity can subscribe only through being added by a node owner (subscription requests are rejected) and only subscribers may retrieve items.</td></tr>
<p>Requirements for a pubsub service can be driven by end-user needs as well as the needs of other components and services which can use the service. First, a pubsub service implemented using Jabber MUST provide the basic features which implement a pure publish-subscribe pattern:</p>
<li>An entity MUST be able to publish events to a service such that all subscribers to a node receive notification of the event.</li>
<li>An entity MUST be allowed to be affiliated with a node. Allowable affiliations are owner, publisher, none, and outcast. Implementations MUST support affiliations of owner and none, and MAY support affiliations of outcast and publisher.</li>
<li>An entity MUST be allowed to query the pubsub service (or a specific node) to determine what optional features of this specification the service (or node) implements. This query MUST use the Service Discovery (disco#info) protocol.</li>
<li>An entity MUST be allowed to query a node to determine non-feature-related information about that node (e.g., the service discovery category+type). This query MUST use the Service Discovery (disco#info) protocol.</li>
</ul>
<!-- =================== MAYS and SHOULDS =================== -->
<p>Some of the possible uses of a Jabber-based pubsub service will require other features, but these features are OPTIONAL and therefore not mandatory for compliance with this specification. However, if these features are implemented, they MUST adhere to the protocol described herein in to be compliant. These features include:</p>
<ul>
<li>A service MAY cache the last item published to a node (even if the "persistent-items" option is not set to true); if it does so default "cache-last-item" to true, it SHOULD send the last published item (or notification thereof) to subscribed entities based on configuration of the "send_last_published_item" field.</li>
<li>A node owner SHOULD be able to specify who may subscribe to a node.</li>
<li>A node owner SHOULD be able to specify who may publish to a node.</li>
<li>A node MAY be configured to deliver the published payload inside the event notification.</li>
<li>A node MAY be configured to persist published items to some persistent storage mechanism.</li>
<li>A node MAY be configured to persist only a limited number of items.</li>
<li>A service MAY support collections.</li>
<li>A service or node MAY support extended service discovery information (meta-data).</li>
<p>Support for the "owner" and "none" affiliations is REQUIRED. Support for all other affiliations is RECOMMENDED. Particular kinds of pubsub services MAY enforce additional requirements.</p>
<tablecaption='Affiliations and their Privileges'>
<tr>
<th>Affiliation</th>
<th>Subscribe</th>
<th>Publish Items</th>
<th>Purge Items</th>
<th>Configure Node</th>
<th>Delete Node</th>
<th>Delete Item</th>
</tr>
<tr>
<td>Owner</td>
<td>Yes</td>
<td>Yes</td>
<td>Yes</td>
<td>Yes</td>
<td>Yes</td>
<td>Yes</td>
</tr>
<tr>
<td>Publisher</td>
<td>Yes</td>
<td>Yes</td>
<td>No</td>
<td>No</td>
<td>No</td>
<td>Yes/No *</td>
</tr>
<tr>
<td>None</td>
<td>Yes</td>
<td>No</td>
<td>No</td>
<td>No</td>
<td>No</td>
<td>No</td>
</tr>
<tr>
<td>Outcast</td>
<td>No</td>
<td>No</td>
<td>No</td>
<td>No</td>
<td>No</td>
<td>No</td>
</tr>
</table>
<p>* Note: A service MAY allow any publisher to delete any item once it has been published to that node instead of allowing only the original publisher to remove it (this is discoverable via the "pubsub#delete-any" feature).</p>
<p>The ways in which an entity changes its affiliation with a node are well-defined. Typically, an owner action is required to make an affiliation state transition. Affiliation changes and their triggering actions are specified in the following table.</p>
<p>Subscriptions to a node may exist in several states.</p>
<tablecaption='Subscription States'>
<tr>
<th>Subscription State</th>
<th>Description</th>
</tr>
<tr>
<td>None</td>
<td>The node MUST NOT send event notifications or payloads to the Entity.</td>
</tr>
<tr>
<td>Pending</td>
<td>An entity has requested to subscribe to a node and the request has not yet been approved by a node owner. The node MUST NOT send event notifications or payloads to the entity while it is in this state.</td>
</tr>
<tr>
<td>Unconfigured</td>
<td>An entity has subscribed but its subscription options have not yet been configured. The node MAY send event notifications or payloads to the entity while it is in this state. The service MAY timeout unconfigured subscriptions.</td>
</tr>
<tr>
<td>Subscribed</td>
<td>An entity is subscribed to a node. The node MUST send all event notifications (and, if configured, payloads) to the entity while it is in this state.</td>
</tr>
</table>
</section2>
<section2topic='Event Types'anchor='events'>
<p>The requirements for the publish-subscribe protocol imply that there are two major dimensions along which we can measure events: persistent vs. transient, and pure notification vs. inclusion of payload. An implementation SHOULD enable an owner to configure a node along both of these dimensions.</p>
<p>No matter whether a node is configured for persistent or transient events, a service MAY cache the last item published to the node, in which case it SHOULD send that item to subscribers based on configuration of the "send_last_published_item" option (see the <linkurl='#impl-caching'>Item Caching</link> section of this document).</p>
<p>A pubsub service MUST validate publish requests against the configuration of the node along both of these dimensions (see the <linkurl='#publisher-publish'>Publish An Item to a Node</link> section of this document for the relevant error conditions).</p>
<p>Whether an item must be provided by the publisher, and whether an item ID is provided by the publisher or generated by the pubsub service, depends on the type of event being published. We can summarize the relevant rules as follows:</p>
<td>Publisher MUST include an &ITEM; element, which MAY be empty or contain a payload; if item ID is not provided by publisher, it MUST be generated by pubsub service</td>
<td>Publisher MUST include an &ITEM; element that contains the payload; if item ID is not provided by publisher, it MUST be generated by pubsub service</td>
</tr>
<tr>
<td><strong>Transient</strong></td>
<td>Publisher MUST NOT include an &ITEM; element (therefore item ID is neither provided nor generated) but the notification will include an empty &ITEMS; element</td>
<td>Publisher MUST include an &ITEM; element that contains the payload, but the item ID is OPTIONAL</td>
</tr>
</table>
</section2>
<section2topic='Node Types'anchor='nodetypes'>
<p>There are two types of nodes:</p>
<tablecaption='Node Types'>
<tr>
<th>Node Type</th>
<th>Description</th>
</tr>
<tr>
<td>Leaf</td>
<td>A node that contains published items only. It is NOT a container for other nodes. This is the most common node type.</td>
</tr>
<tr>
<td>Collection</td>
<td>A node that contains nodes and/or other collections but no published items. Collections make it possible to represent hierarchial node structures.</td>
<p>In order to make node creation simpler for clients, we define the following node access models (in order of openness):</p>
<tablecaption='Node Access Models'>
<tr>
<th>Access Model</th>
<th>Description</th>
</tr>
<tr>
<td>Open</td>
<td>Any entity may subscribe to the node (i.e., without the necessity for subscription approval) and any entity may retrieve items from the node (i.e., without being subscribed); this SHOULD be the default access model for generic pubsub services.</td>
</tr>
<tr>
<td>Presence</td>
<td>Any entity with a subscription of type "from" or "both" may subscribe to the node and retrieve items from the node; this access model applies mainly to instant messaging systems (see <cite>RFC 3921</cite>).</td>
</tr>
<tr>
<td>Roster</td>
<td>Any entity in the specified roster group(s) may subscribe to the node and retrieve items from the node; this access model applies mainly to instant messaging systems (see <cite>RFC 3921</cite>).</td>
</tr>
<tr>
<td>Authorize</td>
<td>The node owner must approve all subscription requests, and only subscribers may retrieve items from the node.</td>
</tr>
<tr>
<td>Whitelist</td>
<td>An entity may be subscribed only through being added to a whitelist by the node owner (unsolicited subscription requests are rejected), and only subscribers may retrieve items from the node. In effect, the default affiliation is outcast. The node owner MUST automatically be on the whitelist. In order to add entities to the whitelist, the node owner SHOULD use the protocol specified in the <linkurl='#owner-affiliations'>Manage Affiliated Entities</link> section of this document.</td>
</tr>
</table>
<p>A generic publish-subscribe implementation SHOULD support all of the defined access models, although specialized publish-subscribe implementations MAY support only a subset of the access models. Which access models are provided in a particular deployment is a matter of service provisioning (e.g., some restricted deployments may wish to lock down permissions so that only the "authorize" and "whitelist" access models are provided, or even only the "whitelist" access model).</p>
<p>In order for a node creator or owner to specify the access model (see the <linkurl='#owner-create'>Create a Node With Default Configuration</link> and <linkurl='#owner-configure'>Configure a Node</link> sections of this document), the 'pubsub#access_model' configuration field is used.</p>
<p>If a pubsub node is addressable, it MUST be addressable either (1) as a JID or (2) as the combination of a JID and a node. <note>These nodes are equivalent to those used in <cite>XEP-0030: Service Discovery</cite>.</note></p>
<p>If a pubsub node is addressable as a JID, the NodeID MUST be the resource identifier, and MUST NOT be specified by the "user" portion (node identifier) of the JID (e.g. "domain.tld/NodeID" and "user@domain.tld/NodeID" are allowed; "NodeID@domain.tld" is not allowed). JID addressing SHOULD be used when interacting with a pubsub node using a protocol that does not support the node attribute. For example, when a service makes it possible for entities to subscribe to nodes via presence, it would address nodes as JIDs. If a pubsub node is addressable as a JID, the pubsub service MUST ensure that the NodeID conforms to the Resourceprep profile of Stringprep as described in <cite>RFC 3920</cite>.</p>
<p>Consider the following example, in which the pubsub service is located at the hostname pubsub.shakespeare.lit.</p>
<examplecaption='Node addressed as domain.tld/NodeID'><![CDATA[
<p>If a pubsub node is addressable as a JID plus node, the NodeID MUST be the value of both the Service Discovery 'node' attribute and the pubsub 'node' attribute; i.e., for discovery purposes, a pubsub node is equivalent to a Service Discovery node. If a pubsub node is addressable as a JID plus node, the pubsub service SHOULD ensure that the NodeID conforms to the Resourceprep profile of Stringprep as described in <cite>RFC 3920</cite>.</p>
<p>Consider the following example, in which the (virtual) pubsub service is located at hamlet@denmark.lit.</p>
<examplecaption='Node addressed as JID+NodeID'><![CDATA[
<iqto='hamlet@denmark.lit'>
<querynode='princely_musings'/>
</iq>
]]></example>
</section3>
</section2>
</section1>
<section1topic='Entity Use Cases'anchor='entity'>
<p>This section defines the use cases for and protocols to be used by any entity that wishes to interact with a publish-subscribe service, mainly focused on Service Discovery use cases.</p>
<p>A service MUST respond to service discovery information requests qualified by the 'http://jabber.org/protocol/disco#info' namespace. The "disco#info" result returned by a pubsub service MUST indicate the identity of the service and indicate which pubsub features are supported.</p>
<examplecaption='Entity Queries Pubsub Service Regarding Supported Features'><![CDATA[
<p>The possible pubsub features are noted throughout this document and have been registered as described in the <linkurl='#registrar'>XMPP Registrar Considerations</link> section of this document. For information regarding which features are required, recommended, and optional, see the <linkurl='#features'>Feature Summary</link> section of this document.</p>
<p>If a service implements a hierarchy of nodes (by means of <linkurl='#collections'>Collection Nodes</link>), it MUST also enable entities to discover the nodes in that hierarchy by means of the <strong>Service Discovery</strong> protocol, subject to the recommendations in <cite>XEP-0030</cite> regarding large result sets (for which &xep0055; or some other protocol SHOULD be used). The following examples show the use of service discovery in discovering the nodes available at a hierarchical pubsub service.</p>
<p>Note: Node hierarchies and collection nodes are OPTIONAL. For details, refer to the <linkurl='#impl-semantics'>NodeID Semantics</link> and <linkurl='#collections'>Collection Nodes</link> sections of this document.</p>
<p>In the first example, an entity sends a service discovery items ("disco#items") request to the root node (i.e., the service itself), which is a <linkurl='#collections'>Collection Node</link>:</p>
<examplecaption='Entity requests all first-level nodes'><![CDATA[
<p>If a node is a leaf node rather than a collection node and items have been published to the node, the service MAY return one &ITEM; element for each published item as described in the <linkurl='#entity-discoveritems'>Discover Items for a Node</link> section of this document, however such items MUST NOT include a 'node' attribute (since they are published items, not nodes).</p>
<p>A pubsub service MUST allow entities to query individual nodes for the information associated with that node. The Service Discovery protocol MUST be used to discover this information. The "disco#info" result MUST include an identity with a category of "pubsub" and a type of either "leaf" or "collection".</p>
<p>Note: If a node has an identity type of "leaf", then it MUST NOT contain other nodes or collections (only items); if a node has an identity type of "collection", then it MUST NOT contain items (only other nodes or collections).</p>
<examplecaption='Entity queries collection node for information'><![CDATA[
<p>The "disco#info" result MAY include detailed meta-data about the node, encapsulated in the &xep0004; format as described in &xep0128;, where the data form context is specified by including a FORM_TYPE of "http://jabber.org/protocol/pubsub#meta-data" in accordance with &xep0068;. If meta-data is provided, it SHOULD include values for all configured options as well as "automatic" information such as the node creation date, a list of publishers, and the like.</p>
<fieldvar='pubsub#contact'label='People to contact with questions'>
<value>bard@shakespeare.lit</value>
</field>
<fieldvar='pubsub#owner'label='Node owners'>
<value>hamlet@denmark.lit</value>
</field>
<fieldvar='pubsub#publisher'label='Publishers to this node'>
<value>hamlet@denmark.lit</value>
</field>
<fieldvar='pubsub#num_subscribers'label='Number of subscribers to this node'>
<value>1066</value>
</field>
</x>
</query>
</iq>
]]></example>
<p>Note: Node meta-data can be set in many ways. Some of it is based on node configuration (e.g., the owner's JID) whereas some of it may be dynamic (e.g., the number of subscribers). Any static information to be provided in the node meta-data SHOULD be provided as fields in the node configuration form.</p>
<p>Much of the meta-data provided about a node maps directly to selected &DUBLINCORE; meta-data attributes; specifically:</p>
<tr><td>pubsub#creation_date</td><td>Date <note>The value SHOULD be a DateTime as defined in <cite>XEP-0082</cite>, and MUST conform to one of the profiles defined therein.</note></td></tr>
<tr><td>pubsub#type</td><td>Type <note>The pubsub type SHOULD be the namespace that defines the payload (such as 'http://www.w3.org/2005/Atom'), if payloads are supported.</note></td></tr>
</table>
</section2>
<section2topic='Discover Items for a Node'anchor='entity-discoveritems'>
<p>To discover the published items which exist on the service for a specific node, an entity MAY send a "disco#items" request to the node itself, and the service MAY return each item as a Service Discovery &ITEM; element. The 'name' attribute of each Service Discovery item MUST contain its ItemID and the item MUST NOT possess a 'node' attribute. This ItemID MAY then be used to retrieve the item using the protocol defined in the <linkurl='#subscriber-retrieve'>Retrieve Items from a Node</link> section of this document.</p>
<examplecaption='Entity requests all of the items for a node'><![CDATA[
<p>A service SHOULD allow an entity to query the service to retrieve its subscriptions for all nodes at the service. In order to make the request, the requesting entity MUST send an IQ-get whose &PUBSUB; child contains an empty <subscriptions/> element with no attributes.</p>
<examplecaption='Entity requests all current subscriptions'><![CDATA[
<iqtype='get'
from='francisco@denmark.lit/barracks'
to='pubsub.shakespeare.lit'
id='subscriptions1'>
<pubsubxmlns='http://jabber.org/protocol/pubsub'>
<subscriptions/>
</pubsub>
</iq>
]]></example>
<p>If the service returns a list of subscriptions, it MUST return all subscriptions for all JIDs that match the bare JID (&BAREJID;) portion of the 'from' attribute on the request.</p>
<p>For each subscription, a <subscription/> element is returned specifying the NodeID, the JID that is affiliated (which MAY include a resource, depending on how the entity subscribed), and the current subscription state. If subscription identifiers are supported by the service, the 'subid' attribute MUST be present as well.</p>
<examplecaption='Service returns all current subscriptions'><![CDATA[
<p>If the requesting entity has no subscriptions, the pubsub service MUST return an empty <subscriptions/> element.</p>
<examplecaption='No subscriptions'><![CDATA[
<iqtype='result'
from='pubsub.shakespeare.lit'
to='francisco@denmark.lit/barracks'
id='subscriptions1'>
<pubsubxmlns='http://jabber.org/protocol/pubsub'>
<subscriptions/>
</pubsub>
</iq>
]]></example>
<p>If the service does not support subscriptions retrieval, the service MUST respond with a &feature; error, specifying a pubsub-specific error condition of <unsupported/> and a feature of "retrieve-subscriptions".</p>
<examplecaption='Subscriptions retrieval not supported'><![CDATA[
<p>A service SHOULD allow an entity to query the service to retrieve its affiliations for all nodes at the service. In order to make the request, the requesting entity includes an empty <affiliations/> element with no attributes.</p>
<examplecaption='Entity requests all current affiliations'><![CDATA[
<iqtype='get'
from='francisco@denmark.lit/barracks'
to='pubsub.shakespeare.lit'
id='affil1'>
<pubsubxmlns='http://jabber.org/protocol/pubsub'>
<affiliations/>
</pubsub>
</iq>
]]></example>
<p>If the service returns a list of affiliations, it MUST return all affiliations for all JIDs that match the bare JID (&BAREJID;) portion of the 'from' attribute on the request.</p>
<p>For each affiliation, an <affiliation/> element is returned containing the NodeID and the affiliation state (owner, publisher, or outcast).</p>
<examplecaption='Service replies with all current affiliations'><![CDATA[
<iqtype='result'
from='pubsub.shakespeare.lit'
to='francisco@denmark.lit'
id='affil1'>
<pubsubxmlns='http://jabber.org/protocol/pubsub'>
<affiliations>
<affiliationnode='node1'affiliation='owner'/>
<affiliationnode='node2'affiliation='publisher'/>
<affiliationnode='node5'affiliation='outcast'/>
<affiliationnode='node6'affiliation='owner'/>
</affiliations>
</pubsub>
</iq>
]]></example>
<p>If the requesting entity has no affiliations, the pubsub service MUST return an empty <affiliations/> element.</p>
<examplecaption='No affiliations'><![CDATA[
<iqtype='result'
from='pubsub.shakespeare.lit'
to='francisco@denmark.lit/barracks'
id='affil1'>
<pubsubxmlns='http://jabber.org/protocol/pubsub'>
<affiliations/>
</pubsub>
</iq>
]]></example>
<p>If the service does not support affiliations retrieval, the service MUST respond with a &feature; error, specifying a pubsub-specific error condition of <unsupported/> and a feature of "retrieve-affiliations".</p>
<examplecaption='Affiliations retrieval not supported'><![CDATA[
<section1topic='Subscriber Use Cases'anchor='subscriber'>
<p>This section defines the use cases for and protocols to be used by potential and actual subscribers. (Note: The <linkurl='#impl'>Implementation Notes</link> section of this document describes many important factors and business rules which a pubsub service MUST observe. In addition, the examples throughout assume the existence of a separate pubsub component and include any relevant 'from' addresses as stamped by a server or network edge.)</p>
<section2topic='Subscribe to a Node'anchor='subscriber-subscribe'>
<p>When a Jabber entity wishes to subscribe to a node, it sends a subscription request to the pubsub service. The subscription request is an IQ-set where the <pubsub/> element contains one and only one <subscribe/> element. The <subscribe/> element MUST possess a 'node' attribute specifying the node to which the entity wishes to subscribe. The <subscribe/> element MUST also possess a 'jid' attribute specifying the exact XMPP address to be used as the subscribed JID -- often a bare JID (&BAREJID;) or full JID (&FULLJID;), although JIDs of the form &DOMAIN; or &DOMAINRES; may subscribe as well.</p>
<p>If the specified JID is a bare JID or full JID, the service MUST at a minimum check the bare JID portion against the bare JID portion of the 'from' attribute on the received IQ request to make sure that the requesting entity has the same identity as the JID which is being requested to be added to the subscriber list. However, some implementations MAY enable the service administrator to configure a list of entities that are excluded from this check; those entities may be considered "trusted proxies" that are allowed to subscribe on behalf of other entities. In the same way, implementations MAY enable blacklisting of entities that are not allowed to perform specific operations (such as subscribing or creating nodes).</p>
<p>A service MAY allow entities to subscribe multiple times to the same node. This enables an entity to subscribe using different subscription options. If multiple subscriptions for the same JID are allowed, the service MUST use the 'subid' attribute to differentiate between subscriptions for the same entity (therefore the SubID MUST be unique for each node+JID combination and the SubID MUST be present on the entity element any time it is sent to the subscriber). It is NOT RECOMMENDED for clients to generate SubIDs, since collisions might result; therefore a service SHOULD generate the SubID on behalf of the subscriber and MAY overwrite SubIDs if they are provided by subscribers. If the service does not allow multiple subscriptions for the same entity and it receives an additional subscription request, the service MUST return the current subscription state (as if the subscription was just approved).</p>
<p>Here is an example of a subscription request.</p>
<examplecaption='Entity subscribes to a node'><![CDATA[
<iqtype='set'
from='francisco@denmark.lit/barracks'
to='pubsub.shakespeare.lit'
id='sub1'>
<pubsubxmlns='http://jabber.org/protocol/pubsub'>
<subscribe
node='princely_musings'
jid='francisco@denmark.lit'/>
</pubsub>
</iq>
]]></example>
<p>If the subscription request is successfully processed, the server MUST inform the requesting entity that it is now subscribed (which MAY include a service-generated SubID).</p>
<examplecaption='Service replies with success'><![CDATA[
<p>The service MAY also send the last published item to the new subscriber. The message containing this item SHOULD be stamped with extended information qualified by the 'jabber:x:delay' namespace (see &xep0091;) to indicate it is are sent with delayed delivery. (Note that in this example the message notification is sent to the bare JID since that is the subscribed JID.)</p>
<p>There are several reasons why the subscription request might fail:</p>
<ol>
<li>The bare JID portions of the JIDs do not match.</li>
<li>The node has an access model of "presence" and the requesting entity is not subscribed to the owner's presence.</li>
<li>The node has an access model of "roster" and the requesting entity is not in one of the authorized roster groups.</li>
<li>The node has an access model of "whitelist" and the requesting entity is not on the whitelist.</li>
<li>The service requires payment for subscriptions to the node.</li>
<li>The requesting entity is anonymous and the service does not allow anonymous entities to subscribe.</li>
<li>The requesting entity has a pending subscription.</li>
<li>The requesting entity is blocked from subscribing (e.g., because having an affiliation of outcast).</li>
<li>The node does not support subscriptions.</li>
<li>The node does not exist.</li>
</ol>
<p>These error cases are described more fully below.</p>
<p>If the bare JID portions of the JIDs do not match as described above and the requesting entity does not have some kind of admin or proxy privilege as defined by the implementation, the service MUST return a &badrequest; error, which SHOULD also include a pubsub-specific error condition of <invalid-jid/>.</p>
<p>For nodes with an access model of "presence", if the requesting entity is not subscribed to the owner's presence then the pubsub service MUST respond with a ¬authorized; error, which SHOULD also include a pubsub-specific error condition of <presence-subscription-required/>.</p>
<examplecaption='Entity is not authorized to create a subscription (presence subscription required)'><![CDATA[
<p>For nodes with an access model of "roster", if the requesting entity is not in one of the authorized roster groups then the pubsub service MUST respond with a ¬authorized; error, which SHOULD also include a pubsub-specific error condition of <not-in-roster-group/>.</p>
<examplecaption='Entity is not authorized to create a subscription (not in roster group)'><![CDATA[
<p>For nodes with a node access model of "whitelist", if the requesting entity is not on the whitelist then the service MUST return a ¬allowed; error, specifying a pubsub-specific error condition of <closed-node/>.</p>
<examplecaption='Node has whitelist access model'><![CDATA[
<p>Commercial deployments may wish to link subscribers to a database of paying customers. If the subscriber needs to provide payment in order to subscribe to the node (e.g., if the subscriber is not in the customer database or the customer's account is not paid up), the service SHOULD return a &payment; error to the subscriber.</p>
<examplecaption='Payment is required for a subscription'><![CDATA[
<p>Some XMPP servers may allow authentication using SASL ANONYMOUS; however, because the resulting entity is unstable (the assigned JID may not be owned by the same principal in a persistent manner), a service MAY prevent anonymous entities from subscribing to nodes and SHOULD use service discovery to determine if an entity has an identity of "account/anonymous". If a requesting entity is anonymous but the service does not allow anonymous entities to subscribe, the service SHOULD return a &forbidden; error to the subscriber.</p>
<examplecaption='Requesting entity is anonymous'><![CDATA[
<p>If the requesting entity has a pending subscription, the service MUST return a ¬authorized; error to the subscriber, specifying a pubsub-specific error condition of <pending-subscription/>.</p>
<examplecaption='Requesting entity has pending subscription'><![CDATA[
<p>If the requesting entity is blocked from subscribing (e.g., because having an affiliation of outcast), the service MUST return a &forbidden; error to the subscriber.</p>
<examplecaption='Requesting entity is blocked'><![CDATA[
<p>If the node does not allow entities to subscribe, the service SHOULD return a &feature; error to the subscriber, specifying a pubsub-specific error condition of <unsupported/> and a feature of "subscribe".</p>
<examplecaption='Subscribing not supported'><![CDATA[
<p>For nodes with an access model of "authorize", subscription requests MUST be approved by one of the node owners; therefore the pubsub service sends a message to the node owner(s) requesting authorization (see the <linkurl='#owner-subreq'>Manage Subscription Requests</link> section of this document). Because the subscription request may or may not be approved, the service MUST return a pending notification to the subscriber.</p>
<examplecaption='Service replies with pending'><![CDATA[
<iqtype='result'
from='pubsub.shakespeare.lit'
to='francisco@denmark.lit/barracks'
id='sub1'>
<pubsubxmlns='http://jabber.org/protocol/pubsub'>
<subscription
node='princely_musings'
jid='francisco@denmark.lit'
subscription='pending'/>
</pubsub>
</iq>
]]></example>
<p>If the entity must configure its subscription options (see the <linkurl='#subscriber-configure'>Configure Subscription Options</link> section of this document) before receiving notifications, the service MUST so inform the entity. It SHOULD do so by returning an IQ-result to the requesting entity with a notation that configuration of subscription options is required.</p>
<examplecaption='Service replies with success and indicates that subscription configuration is required'><![CDATA[
<iqtype='result'
from='pubsub.shakespeare.lit'
to='francisco@denmark.lit/barracks'
id='sub1'>
<pubsubxmlns='http://jabber.org/protocol/pubsub'>
<subscription
node='princely_musings'
jid='francisco@denmark.lit'
subscription='unconfigured'>
<subscribe-options>
<required/>
</subscribe-options>
</subscription>
</pubsub>
</iq>
]]></example>
<p>Note: The node shall include the <required/> child element only if the subscriber must configure the subscription before receiving any notifications. A service MAY time out subscription requests if configuration is required and a configuration request is not submitted within a reasonable amount of time (which shall be determined by the service or node configuration).</p>
<p>Alternatively, if the service is unable to create the subscription without simultaneous configuration, the service MAY return a ¬acceptable; error, specifying a pubsub-specific error condition of <configuration-required/>.</p>
<examplecaption='Service returns error specifying that subscription configuration is required'><![CDATA[
<p>If the <required/> element is not included and no error is returned, the subscription takes effect immediately and the entity may configure the subscription at any time (the service MAY indicate that subscription options are supported by including an empty <subscribe-options/> element in the IQ-result, as shown in the following example).</p>
<examplecaption='Service replies with success and indicates that subscription options are supported but not required'><![CDATA[
<iqtype='result'
from='pubsub.shakespeare.lit'
to='francisco@denmark.lit/barracks'
id='sub1'>
<pubsubxmlns='http://jabber.org/protocol/pubsub'>
<subscription
node='princely_musings'
jid='francisco@denmark.lit'
subscription='unconfigured'>
<subscribe-options/>
</subscription>
</pubsub>
</iq>
]]></example>
</section2>
<section2topic='Unsubscribe from a Node'anchor='subscriber-unsubscribe'>
<p>To unsubscribe from a node, the subscriber sends an IQ-set whose &PUBSUB; child contains an <unsubscribe/> element that specifies the node and the subscribed JID.</p>
<examplecaption='Entity unsubscribes from a node'><![CDATA[
<iqtype='set'
from='francisco@denmark.lit/barracks'
to='pubsub.shakespeare.lit'
id='unsub1'>
<pubsubxmlns='http://jabber.org/protocol/pubsub'>
<unsubscribe
node='princely_musings'
jid='francisco@denmark.lit'/>
</pubsub>
</iq>
]]></example>
<p>If the request can be successfully processed, the service MUST return an IQ result.</p>
<examplecaption='Service replies with success'><![CDATA[
<iqtype='result'
from='pubsub.shakespeare.lit'
to='francisco@denmark.lit/barracks'
id='unsub1'/>
]]></example>
<p>There are several reasons why the unsubscribe request might fail:</p>
<ol>
<li>The requesting entity has multiple subscriptions to the node but does not specify a subscription ID.</li>
<li>The request does not specify an existing subscriber.</li>
<li>The requesting entity does not have sufficient privileges to unsubscribe the specified JID.</li>
<li>The node does not exist.</li>
<li>The request specifies a subscription ID that is not valid or current.</li>
</ol>
<p>These error cases are described more fully below.</p>
<p>If the requesting entity has multiple subscriptions to the node but does not specify a subscription ID, the service MUST return a &badrequest; error, which SHOULD also include a pubsub-specific error condition of <subid-required/>.</p>
<examplecaption='Entity did not specify SubID'><![CDATA[
<p>If the value of the 'jid' attribute does not specify an existing subscriber, the pubsub service MUST return an error stanza, which SHOULD be &unexpected; and which SHOULD also include a pubsub-specific error condition of <not-subscribed/>.</p>
<examplecaption='Requesting entity is not a subscriber'><![CDATA[
<p>If the requesting entity is prohibited from unsubscribing the specified JID, the service MUST return a &forbidden; error. The service MUST validate that the entity making the request is authorized to unsubscribe the entity. If the subscriber's JID is of the form &FULLJID;, a service MUST perform this check by comparing the &BAREJID; part of the two JIDs to ensure that they match. If the bare JID portions of the JIDs do not match and the requesting entity is not authorized to unsubscribe the JID (e.g., because it is not a service-wide admin or authorized proxy), the service MUST return a &forbidden; error.</p>
<examplecaption='Requesting entity is prohibited from unsubscribing entity'><![CDATA[
<p>If a subscription identifier is associated with the subscription, the unsubscribe request MUST include an appropriate 'subid' attribute. If the unsubscribe request includes a SubID but SubIDs are not supported for the node (or the subscriber did not subscribe using a SubID in the first place), the service SHOULD ignore the SubID and simply unsubscribe the entity. If the subscriber originally subscribed with a SubID but the unsubscribe request includes a SubID that is not valid or current for the subscriber, the service MUST return a ¬acceptable; error, which SHOULD also include a pubsub-specific error condition of <invalid-subid/>.</p>
<p>Implementations MAY allow subscribers to configure subscription options. Implementations SHOULD use the <strong>Data Forms</strong> protocol to accomplish this configuration (however, an out-of-band mechanism such as a web interface could be offered as well).</p>
<p>If a service supports subscription options it MUST advertise that fact in its response to a "disco#info" query by including a feature whose 'var' attribute is "pubsub#subscription-options".</p>
<examplecaption='Pubsub service indicates support for subscription options'><![CDATA[
<p>Note: The foregoing example shows some (but by no means all) of the possible configuration options that MAY be provided. If an implementation provides these options using the <strong>Data Forms</strong> protocol, it MUST use the field variables that are registered with the XMPP Registrar in association with the 'http://jabber.org/protocol/pubsub' namespace (a preliminary representation of those field variables is shown above and in the <linkurl='#registrar-formtypes-options'>pubsub#subscribe_options FORM_TYPE</link> section of this document, but MUST NOT be construed as canonical since the XMPP Registrar may standardize additional fields at a later date without changes to this document).</p>
<p>Note: Many of the relevant data form fields are of type "boolean" and MUST be handled accordingly. &BOOLEANNOTE;</p>
<p>There are several reasons why the options request might fail:</p>
<ol>
<li>The requesting entity does not have sufficient privileges to modify subscription options for the specified JID.</li>
<li>The requesting entity (or specified subscriber) is not subscribed.</li>
<li>The request does not specify both the NodeID and the subscriber's JID.</li>
<li>The request does not specify a subscription ID but one is required.</li>
<li>The request specifies a subscription ID that is not valid or current.</li>
<li>Subscription options are not supported.</li>
<li>The node does not exist.</li>
</ol>
<p>These error cases are described more fully below.</p>
<p>When requesting subscription options, the subscriber MUST specify the JID that is subscribed to the node and SHOULD specify a node (if no node is specified, the service MUST assume that the requesting entity wishes to request subscription options for its subscription to the root collection node; see the <linkurl='#collections-root'>Root Collection Node</link> section of this document for details).</p>
<p>The service MUST validate that the entity making the request is authorized to set the subscription options for the subscribed entity. If the subscriber's JID is of the form &FULLJID;, a service MUST perform this check by comparing the &BAREJID; part of the two JIDs to ensure that they match. If the bare JID portions of the JIDs do not match and the requesting entity is not authorized to modify subscription options for the JID (e.g., because it is not a service-wide admin or authorized proxy), the service MUST return a &forbidden; error.</p>
<examplecaption='Requesting entity does not have sufficient privileges to modify subscription options'><![CDATA[
<p>If the requesting entity (or specified subscriber, if different) is not subscribed, the service MUST return an &unexpected; error, which SHOULD also include a pubsub-specific error condition of <not-subscribed/>.</p>
<p>If the subscriber does not specify a JID, the service MUST return a &badrequest; error, which SHOULD also include a pubsub-specific error condition of <jid-required/>.</p>
<examplecaption='Subscriber JID not specified'><![CDATA[
<p>If a subscription identifier is associated with the subscription, the 'subid' attribute MUST be present on the request in order for the service to differentiate subscriptions for the same entity. If the 'subid' is required but not provided, the service MUST return a &badrequest; error, which SHOULD also include a pubsub-specific error condition of <subid-required/>.</p>
<p>If a subscription identifier is associated with the subscription but the request includes a SubID that is not valid or current for the subscriber, the service MUST return a ¬acceptable; error, which SHOULD also include a pubsub-specific error condition of <invalid-subid/>.</p>
<p>If the node or service does not support subscription options, the service MUST respond with a &feature; error, specifying a pubsub-specific error condition of <unsupported/> and a feature of "subscription-options".</p>
<examplecaption='Subscription options not supported'><![CDATA[
<p>After receiving the configuration form, the requesting entity SHOULD submit the form in order to update the entity's subscription options for that node.</p>
<p>The other errors already mentioned for getting subscription options also apply to setting subscription options.</p>
<p>As noted, if a service supports subscription options, an entity MAY subscribe and provide the subscription options in the same stanza.</p>
<p>Note: The <options/> element MUST follow the <subscribe/> element and MUST NOT possess a 'node' attribute or 'jid' attribute, since the value of the <subscribe/> element's 'node' attribute specifies the desired NodeID and the value of the <subscribe/> element's 'jid' attribute specifies the subscriber's JID; if any of these rules are violated, the service MUST return a &badrequest; error.</p>
<examplecaption='Entity subscribes to node and sets configuration options'><![CDATA[
<section2topic='Retrieve Items from a Node'anchor='subscriber-retrieve'>
<p>Implementations of pubsub that choose to persist items MAY allow entities to request existing items from a node (e.g., an entity may wish to do this after successfully subscribing in order to receive all the items in the publishing history for the node). The service MUST conform to the node's access model in determining whether to return items to the entity that requests them. Specifically:</p>
<ul>
<li><p>If the access model is "open", the service SHOULD allow any entity (whether or not it is subscribed) to retrieve items.</p></li>
<li><p>If the access model is "presence", the service SHOULD allow any entity that is subscribed to the owner's presence to retrieve items.</p></li>
<li><p>If the access model is "roster", the service SHOULD allow any entity that is subscribed to the owner's presence and contained in the relevant roster group(s) to retrieve items.</p></li>
<li><p>If the access model is "authorize" or "whitelist", the service MUST allow only subscribed entities to retrieve items.</p></li>
</ul>
<p>The only exception foreseen to the SHOULD requirements for the foregoing access models is the enforcement of local privacy and security policies as specified more fully in the <linkurl='#security'>Security Considerations</link> section of this document. (In addition, a service MUST always allow the node owner to retrieve items from a node and SHOULD always allow a publisher to do so.)</p>
<p>The subscriber may request all items by specifying only the Node ID without restrictions.</p>
<examplecaption='Subscriber requests all items'><![CDATA[
<iqtype='get'
from='francisco@denmark.lit/barracks'
to='pubsub.shakespeare.lit'
id='items1'>
<pubsubxmlns='http://jabber.org/protocol/pubsub'>
<itemsnode='princely_musings'/>
</pubsub>
</iq>
]]></example>
<p>The service then SHOULD return all items published to the node, although it MAY truncate the result set if a large number of items has been published.</p>
<examplecaption='Service returns all items'><![CDATA[
<iqtype='result'
from='pubsub.shakespeare.lit'
to='francisco@denmark.lit/barracks'
id='items1'>
<pubsubxmlns='http://jabber.org/protocol/pubsub'>
<itemsnode='princely_musings'>
<itemid='368866411b877c30064a5f62b917cffe'>
<entryxmlns='http://www.w3.org/2005/Atom'>
<title>The Uses of This World</title>
<summary>
O, that this too too solid flesh would melt
Thaw and resolve itself into a dew!
</summary>
<linkrel='alternate'type='text/html'
href='http://denmark.lit/2003/12/13/atom03'/>
<id>tag:denmark.lit,2003:entry-32396</id>
<published>2003-12-12T17:47:23Z</published>
<updated>2003-12-12T17:47:23Z</updated>
</entry>
</item>
<itemid='3300659945416e274474e469a1f0154c'>
<entryxmlns='http://www.w3.org/2005/Atom'>
<title>Ghostly Encounters</title>
<summary>
O all you host of heaven! O earth! what else?
And shall I couple hell? O, fie! Hold, hold, my heart;
And you, my sinews, grow not instant old,
But bear me stiffly up. Remember thee!
</summary>
<linkrel='alternate'type='text/html'
href='http://denmark.lit/2003/12/13/atom03'/>
<id>tag:denmark.lit,2003:entry-32396</id>
<published>2003-12-12T23:21:34Z</published>
<updated>2003-12-12T23:21:34Z</updated>
</entry>
</item>
<itemid='4e30f35051b7b8b42abe083742187228'>
<entryxmlns='http://www.w3.org/2005/Atom'>
<title>Alone</title>
<summary>
Now I am alone.
O, what a rogue and peasant slave am I!
</summary>
<linkrel='alternate'type='text/html'
href='http://denmark.lit/2003/12/13/atom03'/>
<id>tag:denmark.lit,2003:entry-32396</id>
<published>2003-12-13T11:09:53Z</published>
<updated>2003-12-13T11:09:53Z</updated>
</entry>
</item>
<itemid='ae890ac52d0df67ed7cfdf51b644e901'>
<entryxmlns='http://www.w3.org/2005/Atom'>
<title>Soliloquy</title>
<summary>
To be, or not to be: that is the question:
Whether 'tis nobler in the mind to suffer
The slings and arrows of outrageous fortune,
Or to take arms against a sea of troubles,
And by opposing end them?
</summary>
<linkrel='alternate'type='text/html'
href='http://denmark.lit/2003/12/13/atom03'/>
<id>tag:denmark.lit,2003:entry-32397</id>
<published>2003-12-13T18:30:02Z</published>
<updated>2003-12-13T18:30:02Z</updated>
</entry>
</item>
</items>
</pubsub>
</iq>
]]></example>
<p>Even if the service or node does not support persistent items, it MAY return the last published item.</p>
<examplecaption='Service returns last published item'><![CDATA[
<iqtype='result'
from='pubsub.shakespeare.lit'
to='francisco@denmark.lit/barracks'
id='items1'>
<pubsubxmlns='http://jabber.org/protocol/pubsub'>
<itemsnode='princely_musings'>
<itemid='ae890ac52d0df67ed7cfdf51b644e901'>
<entryxmlns='http://www.w3.org/2005/Atom'>
<title>Soliloquy</title>
<summary>
To be, or not to be: that is the question:
Whether 'tis nobler in the mind to suffer
The slings and arrows of outrageous fortune,
Or to take arms against a sea of troubles,
And by opposing end them?
</summary>
<linkrel='alternate'type='text/html'
href='http://denmark.lit/2003/12/13/atom03'/>
<id>tag:denmark.lit,2003:entry-32397</id>
<published>2003-12-13T18:30:02Z</published>
<updated>2003-12-13T18:30:02Z</updated>
</entry>
</item>
</items>
</pubsub>
</iq>
]]></example>
<p>There are several reasons why the items retrieval request might fail:</p>
<ol>
<li>The requesting entity has multiple subscriptions to the node but does not specify a subscription ID.</li>
<li>The requesting entity is subscribed but specifies an invalid subscription ID.</li>
<li>The node does not return items to unsubscribed entities and the requesting entity is not subscribed.</li>
<li>The service or node does not support persistent items and does not return the last published item.</li>
<li>The service or node does not support item retrieval.</li>
<li>The node has an access model of "presence" and the requesting entity is not subscribed to the owner's presence.</li>
<li>The node has an access model of "roster" and the requesting entity is not in one of the authorized roster groups.</li>
<li>The node has an access model of "whitelist" and the requesting entity is not on the whitelist.</li>
<li>The service or node requires payment for item retrieval.</li>
<li>The requesting entity is blocked from retrieving items from the node (e.g., because having an affiliation of outcast).</li>
<li>The node does not exist.</li>
</ol>
<p>These error cases are described more fully below.</p>
<p>If the requesting entity has multiple subscriptions to the node but does not specify a subscription ID, the service MUST return a &badrequest; error to the subscriber, which SHOULD also include a pubsub-specific error condition of <subid-required/>.</p>
<examplecaption='Entity did not specify SubID'><![CDATA[
<p>If the requesting entity is subscribed but specifies an invalid subscription ID, the service MUST return a ¬acceptable; error to the subscriber, which SHOULD also include a pubsub-specific error condition of <invalid-subid/>.</p>
<p>If the node does not return items to unsubscribed entities and the requesting entity is not subscribed (which includes having a pending subscription), the service MUST return a ¬authorized; error to the subscriber, which SHOULD also include a pubsub-specific error condition of <not-subscribed/>.</p>
<examplecaption='Entity is not subscribed'><![CDATA[
<p>If the service or node does not support persistent items and does not return the last published item, the service MUST return a &feature; error to the subscriber, specifying a pubsub-specific error condition of <unsupported/> and a feature of "persistent-items".</p>
<examplecaption='Persistent items not supported'><![CDATA[
<p>If the service or node does not support item retrieval (e.g., because the node is a collection node), the service MUST return a &feature; error to the subscriber, specifying a pubsub-specific error condition of <unsupported/> and a feature of "retrieve-items".</p>
<examplecaption='Item retrieval not supported'><![CDATA[
<p>For nodes with an access model of "presence", if the requesting entity is not subscribed to the owner's presence then the pubsub service MUST respond with a ¬authorized; error, which SHOULD also include a pubsub-specific error condition of <presence-subscription-required/>.</p>
<examplecaption='Entity is not authorized to retrieve items (presence subscription required)'><![CDATA[
<p>For nodes with an access model of "roster", if the requesting entity is not in one of the authorized roster groups then the pubsub service MUST respond with a ¬authorized; error, which SHOULD also include a pubsub-specific error condition of <not-in-roster-group/>.</p>
<examplecaption='Entity is not authorized to retrieve items (not in roster group)'><![CDATA[
<p>For nodes with a node access model of "whitelist", if the requesting entity is not on the whitelist then the service MUST return a ¬allowed; error, specifying a pubsub-specific error condition of <closed-node/>.</p>
<examplecaption='Node has whitelist access model'><![CDATA[
<p>Commercial deployments may wish to link subscribers to a database of paying customers. If the subscriber needs to provide payment in order to retrieve items from the node (e.g., if the subscriber is not in the customer database or the customer's account is not paid up), the service SHOULD return a &payment; error to the subscriber.</p>
<examplecaption='Payment is required to retrieve items'><![CDATA[
<p>If the requesting entity is blocked from subscribing (e.g., because having an affiliation of outcast), the service MUST return a &forbidden; error to the subscriber.</p>
<examplecaption='Requesting entity is blocked'><![CDATA[
<p>A service MAY allow entities to request the most recent N items by using the 'max_items' attribute. When max_items is used, implementations SHOULD return the N most recent (as opposed to the N oldest) items. (Note: A future version of this specification may recommend the use of &xep0059; instead of the 'max_items' attribute.)</p>
<examplecaption='Subscriber requests two most recent items'><![CDATA[
<iqtype='get'
from='francisco@denmark.lit/barracks'
to='pubsub.shakespeare.lit'
id='items2'>
<pubsubxmlns='http://jabber.org/protocol/pubsub'>
<itemsnode='princely_musings'max_items='2'/>
</pubsub>
</iq>
]]></example>
<examplecaption='Service returns two most recent items'><![CDATA[
<iqtype='result'
from='pubsub.shakespeare.lit'
to='francisco@denmark.lit/barracks'
id='items2'>
<pubsubxmlns='http://jabber.org/protocol/pubsub'>
<itemsnode='princely_musings'>
<itemid='4e30f35051b7b8b42abe083742187228'>
<entryxmlns='http://www.w3.org/2005/Atom'>
<title>Alone</title>
<summary>
Now I am alone.
O, what a rogue and peasant slave am I!
</summary>
<linkrel='alternate'type='text/html'
href='http://denmark.lit/2003/12/13/atom03'/>
<id>tag:denmark.lit,2003:entry-32396</id>
<published>2003-12-13T11:09:53Z</published>
<updated>2003-12-13T11:09:53Z</updated>
</entry>
</item>
<itemid='ae890ac52d0df67ed7cfdf51b644e901'>
<entryxmlns='http://www.w3.org/2005/Atom'>
<title>Soliloquy</title>
<summary>
To be, or not to be: that is the question:
Whether 'tis nobler in the mind to suffer
The slings and arrows of outrageous fortune,
Or to take arms against a sea of troubles,
And by opposing end them?
</summary>
<linkrel='alternate'type='text/html'
href='http://denmark.lit/2003/12/13/atom03'/>
<id>tag:denmark.lit,2003:entry-32397</id>
<published>2003-12-13T18:30:02Z</published>
<updated>2003-12-13T18:30:02Z</updated>
</entry>
</item>
</items>
</pubsub>
</iq>
]]></example>
<p>The service MAY return event notifications without payloads (e.g., to conserve bandwidth). If so, the client MAY request a specific item (using the ItemID) in order to retrieve the payload. When an entity requests items by ItemID, implementations MUST allow multiple items to be specified in the request.</p>
<examplecaption='Subscriber requests specific items by ItemID'><![CDATA[
<p>If a subscription identifier is associated with a specific subscription, the service MUST require it so that it can generate different sets of items based on the subscription options associated with a specific subscription. Therefore the entity MUST include the 'subid' attribute with the items element when making the request; if it does not, the service MUST return a ¬acceptable; error, specifying a pubsub-specific error condition of <subid-required/>.</p>
<examplecaption='Subscriber sends request without SubID'><![CDATA[
<section1topic='Publisher Use Cases'anchor='publisher'>
<section2topic='Publish an Item to a Node'anchor='publisher-publish'>
<p>Any entity which is allowed to publish items to a node (i.e., a publisher or an owner) may do so at any time by sending an IQ-set to the service containing a pubsub element with a <publish/> child; the <publish/> element MUST possess a 'node' attribute and depending on the node configuration MAY contain no &ITEM; elements, one &ITEM; element, or (for <linkurl='#impl-batch'>Batch Processing</link>) more than one &ITEM; element.</p>
<p>Note: It is not necessary for a publication request to include a payload or even an &ITEM; element in order to trigger a notification. For example, the result of publishing to a transient, notification-only node will be a notification that does not include even an &ITEM; element (as shown in the <linkurl='#intro-example'>Motivating Example</link> section of this document). However, for the sake of convenience we refer to the act of publication as "publishing an item" (rather than, say, "triggering a notification") even though a publication request will not always contain an &ITEM; element.</p>
<examplecaption='Publisher publishes an item with an ItemID'><![CDATA[
<iqtype='set'
from='hamlet@denmark.lit/blogbot'
to='pubsub.shakespeare.lit'
id='publish1'>
<pubsubxmlns='http://jabber.org/protocol/pubsub'>
<publishnode='princely_musings'>
<itemid='ae890ac52d0df67ed7cfdf51b644e901'>
<entryxmlns='http://www.w3.org/2005/Atom'>
<title>Soliloquy</title>
<summary>
To be, or not to be: that is the question:
Whether 'tis nobler in the mind to suffer
The slings and arrows of outrageous fortune,
Or to take arms against a sea of troubles,
And by opposing end them?
</summary>
<linkrel='alternate'type='text/html'
href='http://denmark.lit/2003/12/13/atom03'/>
<id>tag:denmark.lit,2003:entry-32397</id>
<published>2003-12-13T18:30:02Z</published>
<updated>2003-12-13T18:30:02Z</updated>
</entry>
</item>
</publish>
</pubsub>
</iq>
]]></example>
<p>If the pubsub service can successfully process the request, it MUST inform the publisher of success.</p>
<examplecaption='Service replies with success'><![CDATA[
<iqtype='result'
from='pubsub.shakespeare.lit'
to='hamlet@denmark.lit/blogbot'
id='publish1'/>
]]></example>
<p>If the pubsub service can successfully process the request, it MUST send then one &MESSAGE; stanza containing a pubsub event notification to each approved subscriber. Each &MESSAGE; stanza generated by a pubsub service SHOULD possess an 'id' attribute with a unique value so that the service can properly track any notification-related errors that may occur (see the <linkurl='#impl-errors'>Handling Notification-Related Errors</link> section of this document).</p>
<p>Depending on the node configuration, the event notification either will or will not contain the payload, as shown in the following examples.</p>
<p>If the node is configured to include payloads, the subscribers will receive payloads with the event notifications.</p>
<examplecaption='Subscribers receive event notifications with payloads'><![CDATA[
<p>If the node is configured to not include payloads, the subscribers will receive event notifications only. (If payloads are not included, subscribers may request the published item via the protocol defined in the <linkurl='#subscriber-retrieve'>Retrieve Items from a Node</link> section of this document.)</p>
<p>If a single entity is subscribed to a node multiple times, the service SHOULD notate the event notification so that the entity can determine which subscription identifier(s) generated this event. If these notations are included, they MUST use the &xep0131; format and SHOULD be included after the event notification information (i.e., as the last child of the &MESSAGE; stanza).</p>
<p>There are several reasons why the publish request might fail:</p>
<ol>
<li>The requesting entity does not have sufficient privileges to publish.</li>
<li>The node does not support item publication.</li>
<li>The node does not exist.</li>
<li>The payload size exceeds a service-defined limit.</li>
<li>The item contains more than one payload element or the namespace of the root payload element does not match the configured namespace for the node.</li>
<li>The request does not match the node configuration.</li>
</ol>
<p>These error cases are described more fully below.</p>
<p>Note: If a publisher publishes an item with an Item ID and the ItemID matches that of an existing item, the pubsub service MUST NOT fail the publication but instead MUST overwrite the existing item and generate a new event notification (i.e., re-publication is equivalent to modification).</p>
<p>If the requesting entity does not have sufficient privileges to publish, the service MUST return a &forbidden; error.</p>
<examplecaption='Entity does not have sufficient privileges to publish to node'><![CDATA[
<p>If the node does not support item publication (because it is a <linkurl='#collections'>Collection Node</link>), the service MUST return a &feature; error, specifying a pubsub-specific error condition of <unsupported/> and a feature of "publish".</p>
<examplecaption='Node does not support item publication'><![CDATA[
<p>If the payload size exceeds a service-defined limit, the service MUST return a ¬acceptable; error, which SHOULD also include a pubsub-specific error condition of <payload-too-big/>.</p>
<examplecaption='Entity attempts to publish very large payload'><![CDATA[
<p>If the &ITEM; element contains more than one payload element or the namespace of the root payload element does not match the configured namespace for the node, the service MUST bounce the request with a &badrequest; error, which SHOULD also include a pubsub-specific error condition of <invalid-payload/>.</p>
<examplecaption='Entity attempts to publish item with multiple payload elements or namespace does not match'><![CDATA[
<p>If the request does not conform to the configured <linkurl='#events'>event type</link> for the node, the service MAY bounce the request with a &badrequest; error, which SHOULD also include a pubsub-specific error condition. The following rules apply:</p>
<ul>
<li>If the event type is persistent (either notification or payload) and the publisher does not specify an ItemID, the service MUST generate the ItemID and MUST NOT bounce the publication request.</li>
<li>If the event type is persistent (either notification or payload) and the publisher does not include an item, the service MUST bounce the publication request with a &badrequest; error and a pubsub-specific error condition of <item-required/>.</li>
<li>If the event type is payload (either persistent or transient) and the publisher does not include a payload, the service SHOULD bounce the publication request with a &badrequest; error and a pubsub-specific error condition of <payload-required/>.</li>
<li>If the event type is notification + transient and the publisher provides an item, the service MUST bounce the publication request with a &badrequest; error and a pubsub-specific error condition of <item-forbidden/>.</li>
</ul>
<p>Examples of these errors are shown below.</p>
<examplecaption='Publisher attempts to publish to persistent node with no item'><![CDATA[
<p>Finally, in order to facilitate authorization for item removal as described in the <linkurl='#publisher-delete'>Delete an Item from a Node</link> section of this document, implementations that support persistent items SHOULD store the item (if the node is so configured) and maintain a record of the publisher.</p>
</section2>
<section2topic='Delete an Item from a Node'anchor='publisher-delete'>
<p>A service SHOULD allow a publisher to delete an item once it has been published to a node that supports persistent items. To delete an item, the publisher sends a retract request as shown in the following examples. The <retract/> element MUST possess a 'node' attribute, MAY possess a 'notify' attribute, and SHOULD contain one &ITEM; element (but MAY contain more than one &ITEM; element for <linkurl='#impl-batch'>Batch Processing</link> of item retractions); the &ITEM; element MUST be empty and MUST possess an 'id' attribute.</p>
<examplecaption='Entity deletes an item from a node'><![CDATA[
<iqtype='set'
from='hamlet@denmark.lit/elsinore'
to='pubsub.shakespeare.lit'
id='retract1'>
<pubsubxmlns='http://jabber.org/protocol/pubsub'>
<retractnode='princely_musings'>
<itemid='ae890ac52d0df67ed7cfdf51b644e901'/>
</retract>
</pubsub>
</iq>
]]></example>
<examplecaption='Service replies with success'><![CDATA[
<iqtype='result'
from='pubsub.shakespeare.lit'
to='hamlet@denmark.lit/elsinore'
id='retract1'/>
]]></example>
<p>There are several reasons why the item retraction request might fail:</p>
<ol>
<li>The publisher does not have sufficient privileges to delete the requested item.</li>
<li>The node or item does not exist.</li>
<li>The request does not specify a node.</li>
<li>The request does not include an &ITEM; element or the &ITEM; element does not specify an ItemID.</li>
<li>The node does not support persistent items.</li>
<li>The service does not support the deletion of items.</li>
</ol>
<p>These error cases are described more fully below.</p>
<p>If the requesting entity does not have sufficient privileges to delete the item, the service MUST return a &forbidden; error.</p>
<examplecaption='Requesting entity does not have sufficient privileges'><![CDATA[
<p>If the request does not specify a node, the service MUST return a &badrequest; error, which SHOULD also include a pubsub-specific error condition of <node-required/>.</p>
<examplecaption='Request does not specify a node'><![CDATA[
<p>If the request does not include an &ITEM; element or the &ITEM; element does not specify an ItemID, the service MUST return a &badrequest; error, which SHOULD also include a pubsub-specific error condition of <item-required/>.</p>
<examplecaption='Request does not specify an item'><![CDATA[
<p>If the node does not support persistent items (e.g., because it is a collection node or a transient node that does not deliver payloads), the service MUST return a &feature; error, specifying a pubsub-specific error condition of <unsupported/> and a feature of "persistent-items".</p>
<examplecaption='Node does not support persistent items'><![CDATA[
<p>If the service does not support item deletion, it MUST return a &feature; error, specifying a pubsub-specific error condition of <unsupported/> and a feature of "delete-nodes".</p>
<examplecaption='Service does not support item deletion'><![CDATA[
<p>If none of the foregoing errors occurred, then the service MUST delete the item.</p>
<p>If none of the foregoing errors occurred and the <retract/> element included a 'notify' attribute with a value of "true" or "1" &BOOLEANNOTE;, then the service MUST delete the item and MUST send message notifications to all subscribers as shown below. The syntax is identical to publish notifications except that instead of an &ITEM; element, the notification includes a <retract/> element.</p>
<examplecaption='Subscribers are notified of deletion'><![CDATA[
<p>If a single entity is subscribed to the node multiple times, the service SHOULD notate the notification of item deletion so that the entity can determine which subscription identifier(s) generated this event. As above, if these notations are included, they MUST use the <cite>Stanza Headers and Internet Metadata (SHIM)</cite> protocol and SHOULD be included after the event notification information (i.e., as the last child of the &MESSAGE; stanza).</p>
<p>A service SHOULD allow entities to create new nodes. However, a service MAY disallow creation of nodes based on the identity of the requesting entity, or MAY disallow node creation altogether (e.g., reserving that privilege to a service-wide administrator).</p>
<p>There are two ways to create a node:</p>
<ol>
<li>Create a node with default configuration for the specified node type.</li>
<li>Create and configure a node simultaneously.</li>
</ol>
<p>These methods, along with method-specific error conditions, are explained more fully in the following sections.</p>
<p>In addition to method-specific error conditions, there are several general reasons why the node creation request might fail:</p>
<ul>
<li>The service does not support node creation.</li>
<li>Only entities that are registered with the service are allowed to create nodes but the requesting entity is not registered.</li>
<li>The requesting entity does not have sufficient privileges to create nodes.</li>
<li>The requested NodeID already exists.</li>
<li>The request did not include a NodeID and "instant nodes" are not supported.</li>
</ul>
<p>These general error cases are described more fully below.</p>
<p>If the service does not support node creation, it MUST respond with a &feature; error, specifying a pubsub-specific error condition of <unsupported/> and a feature of "create-nodes".</p>
<examplecaption='Service does not support node creation'><![CDATA[
<p>If only entities that are registered with the service may create nodes but the requesting entity has not yet registered, the service MUST respond with a ®istration; error.</p>
<p>If the node creator does not specify a NodeID but the service does not support instant nodes, the service MUST return a ¬acceptable; error, specifying a pubsub-specific error condition of <nodeid-required/>.</p>
<examplecaption='Service does not support instant nodes'><![CDATA[
<p>If the node creator does not specify a NodeID but the service supports instant nodes, the service SHOULD generate a NodeID that is unique within the context of the service on behalf of the node creator.</p>
<examplecaption='Entity requests an instant node'><![CDATA[
<iqtype='set'
from='hamlet@denmark.lit/elsinore'
to='pubsub.shakespeare.lit'
id='create2'>
<pubsubxmlns='http://jabber.org/protocol/pubsub'>
<create/>
<configure/>
</pubsub>
</iq>
]]></example>
<p>If no error occurs, the pubsub service SHOULD create the node, generate a NodeID that is unique within the context of that service, and inform the user of success (including the NodeID in the response).</p>
<examplecaption='Service replies with success and generated NodeID'><![CDATA[
<p>Note: When a service successfully creates a node on behalf of the requesting entity, it MUST return an IQ result. If the node creation request did not specify a NodeID and the service supports creation of instant nodes, the service MUST specify the created NodeID in the IQ result. Similarly, if the node creation request specified a NodeID but the service modified the NodeID before creating the node as described in the <linkurl='#collections'>Collection Nodes</link> section of this document, the service MUST also specify the modified node in the IQ result. In all other cases, the service MUST NOT specify the NodeID in the IQ result (since the node creator can determine which node was created by tracking the 'id' attribute that it specified for the IQ-set).</p>
</section3>
<section3topic='Create a Node With Default Configuration'anchor='owner-create-default'>
<p>As explained above, each node type has its own default configuration. By asking the service to create a node with default configuration, the node creator accepts the default configuration. If the service allows node configuration, the owner may reconfigure the node after creating the node (as described in the <linkurl='#owner-configure'>Configure a Node</link> section of this document). In addition, a service MAY allow entities to determine the default configuration options for a given node type before creating a node (as described in the <linkurl='#owner-default'>Request Default Configurations</link> section of this document).</p>
<p>In order to create a node with default configuration, the node creator MUST include an empty <configure/> child element in the creation request. The node creator MAY specify values for the 'pubsub#node_type' and 'pubsub#access_model' configuration fields or MAY accept the defaults, which are "leaf" for the 'pubsub#node_type' field and the value represented by the 'pubsub#access_model' field (i.e., "authorize", "open", "presence", "roster", or "whitelist").</p>
<p>In the following example, the node creator requests a leaf node (the default type) with an open access model (assumed to be the default type for this service).</p>
<examplecaption='Entity requests leaf node with (default) open access model'><![CDATA[
<iqtype='set'
from='hamlet@denmark.lit/elsinore'
to='pubsub.shakespeare.lit'
id='create1'>
<pubsubxmlns='http://jabber.org/protocol/pubsub'>
<createnode='princely_musings'/>
<configure/>
</pubsub>
</iq>
]]></example>
<p>In order to request an access model other than the default for the service, the node creator MUST include a Data Form in the node creation request that specifies a non-default value for the 'pubsub#node_type' field.</p>
<examplecaption='Entity requests leaf node with non-default access model'><![CDATA[
<p>If the access model is supported and none of the general or method-specific errors has occurred, the service SHOULD create the node and inform the requesting entity of success.</p>
<examplecaption='Service informs requesting entity of success'><![CDATA[
<iqtype='result'
from='pubsub.shakespeare.lit'
to='hamlet@denmark.lit/elsinore'
id='create1'/>
]]></example>
<p>If service does not support the specified access model, it MUST return a ¬acceptable; error, specifying a pubsub-specific error condition of <unsupported-access-model/>.</p>
<examplecaption='Service does not support specified access model'><![CDATA[
<p>(For error handling if the service does not support the specified node type, see the <linkurl='#collections'>Collection Node</link> section of this document.)</p>
</section3>
<section3topic='Create and Configure a Node'anchor='owner-create-and-configure'>
<p>If an implementation allows node configuration (see the <linkurl='#owner-configure'>Configure a Node</link> section of this document), it SHOULD allow node creation requests to contain the desired node configuration in the node creation request.</p>
<p>Note: The <configure/> element MUST follow the <create/> element and MUST NOT possess a 'node' attribute, since the value of the <create/> element's 'node' attribute specifies the desired NodeID; if any of these rules are violated, the service MUST return a &badrequest; error.</p>
<examplecaption='Entity requests a new node with non-default configuration.'><![CDATA[
<examplecaption='Service replies with success'><![CDATA[
<iqtype='result'
from='pubsub.shakespeare.lit'
to='hamlet@denmark.lit/elsinore'
id='create1'/>
]]></example>
<p>If a service supports this "create-and-configure" feature, it MUST advertise that fact by returning a feature of "http://jabber.org/protocol/pubsub#create-and-configure" in response to service discovery information requests. If the create-and-configure option is not supported but the requesting entity sends such a request anyway, the service SHOULD ignore the configuration part of the request and proceed as if it had not been included.</p>
</section3>
</section2>
<section2topic='Configure a Node'anchor='owner-configure'>
<p>After creating a new node, the node owner may want to modify the node configuration. The process for doing so is shown below.</p>
<p>Note: The following example shows some of the possible configuration options that MAY be provided. If an implementation implements these features using the <strong>Data Forms</strong> protocol, that implementation MUST use the fields that are registered with the XMPP Registrar in association with the 'http://jabber.org/protocol/pubsub' namespace (a preliminary representation of those field variables is shown below and in the <linkurl='#registrar-formtypes-config'>pubsub#node_config FORM_TYPE</link> section of this document, but MUST NOT be construed as canonical, since the XMPP Registrar may standardize additional fields at a later date without changes to this document). An implementation MAY choose to specify different labels, values, and even field types, but MUST conform to the defined variable naming scheme.</p>
<p>There are several reasons why the node configuration request might fail:</p>
<ol>
<li>The service does not support node configuration.</li>
<li>The requesting entity does not have sufficient privileges to configure the node.</li>
<li>The request did not specify a node.</li>
<li>The node has no configuration options.</li>
<li>The specified node does not exist.</li>
</ol>
<p>These error cases are described more fully below.</p>
<p>If the service does not support node configuration, the service MUST return a &feature; error, specifying a pubsub-specific error condition of <unsupported/> and a feature of "config-node".</p>
<examplecaption='Service does not support node configuration'><![CDATA[
<p>If the request did not specify a node, the service SHOULD return a &badrequest; error. It is possible that by not including a NodeID, the requesting entity is asking to configure the root node; however, if the requesting entity is not a service-level admin, it makes sense to return &badrequest; instead of &forbidden;.</p>
<examplecaption='Request did not specify a node'><![CDATA[
<p>If no configuration options are available (e.g., because node configuration is "locked down"), the service MUST return a ¬allowed; error to the owner.</p>
<examplecaption='Node has no configuration options'><![CDATA[
<p>If the requested node configuration change cannot be processed (e.g., because the node owner has attempted to change the configuration so that there are no node owners), the service MUST return a ¬acceptable; error to the owner.</p>
<examplecaption='Configuration change cannot be processed'><![CDATA[
<p>If the "pubsub#notify_config" option is set to true, the service MUST send a notification of configuration change to all subscribers. (A service SHOULD support this option for leaf nodes and MUST support it for <linkurl='#collection'>Collection Nodes</link>.) If the node configuration is set to event notifications only, the notification MUST consist of an empty <configuration/> element whose 'node' attribute is set to the NodeID of the node; if the node configuration is set to full payloads, the <configuration/> element MUST in addition contain the node configuration as represented via the <strong>Data Forms</strong> protocol.</p>
<p>A service MAY allow entities to determine the default node configuration for new nodes created on the service, in order to help entities determine whether they want to perform create-and-configure as previously described. To get the options, the entity MUST send an empty <default/> element to the service with no NodeID; in response, the service SHOULD return the default node options.</p>
label='Deliver notifications only to available users'>
<value>0</value>
</field>
</x>
</default>
</pubsub>
</iq>
]]></example>
<p>There are several reasons why the default node configuration options request might fail:</p>
<ol>
<li>The service does not support node configuration.</li>
<li>The service does not support retrieval of default node configuration.</li>
</ol>
<p>These error cases are described more fully below.</p>
<p>If the service does not support node configuration, it MUST return a &feature; error, specifying a pubsub-specific error condition of <unsupported/> and a feature of "config-node".</p>
<examplecaption='Service does not support node configuration'><![CDATA[
<p>If the service does not support retrieval of default node configuration options, it MUST return a &feature; error, specifying a pubsub-specific error condition of <unsupported/> and a feature of "retrieve-default".</p>
<examplecaption='Service does not support retrieval of default configuration options'><![CDATA[
<p>The default configuration options may be different for a collection node vs. a leaf node. In order to specifically request the default configuration options for collection nodes, an entity MUST include a Data Form with a 'pubsub#node_type' field whose value is "collection" in the request (since the default value for the 'pubsub#node_type' field is "leaf").</p>
<examplecaption='Entity requests default configuration options for collection nodes'><![CDATA[
<p>If the service does not support collection nodes, it MUST return a &feature; error, specifying a pubsub-specific error condition of <unsupported/> and a feature of "collections".</p>
<examplecaption='Service does not support collection nodes'><![CDATA[
<section2topic='Delete a Node'anchor='owner-delete'>
<p>If a service supports node creation, it MUST support node deletion. If an implementation persists items, it MUST remove all items from persistent storage before the node itself is deleted.</p>
<p>In order to delete a node, a node owner MUST send a node deletion request, consisting of a <delete/> element whose 'node' attribute specifies the NodeID of the node to be deleted.</p>
<p>If no error occurs, the service MUST inform the owner of success.</p>
<examplecaption='Service replies with success'><![CDATA[
<iqtype='result'
from='pubsub.shakespeare.lit'
id='delete1'/>
]]></example>
<p>In addition, the service MUST also send notification of node deletion to all subscribers (which SHOULD include pending and unconfigured subscriptions).</p>
<examplecaption='Subscribers are notified of node deletion'><![CDATA[
<p>There are several reasons why the node deletion request might fail:</p>
<ol>
<li>The requesting entity does not have sufficient privileges to delete the node.</li>
<li>The node is the root collection node, which cannot be deleted.</li>
<li>The specified node does not exist.</li>
</ol>
<p>These error cases are described more fully below.</p>
<p>If the requesting entity does not have sufficient privileges to delete the node (e.g., is not an owner), the service MUST return a &forbidden; error.</p>
<examplecaption='Entity is not an owner'><![CDATA[
<p>If the deleted node is a <linkurl='#collections'>Collection Node</link>, the implementation MAY associate the "orphaned" leaf nodes with the root collection node or associate them with no collection node.</p>
</section2>
<section2topic='Purge All Node Items'anchor='owner-purge'>
<p>If a service persists published items, it MAY enable node owners to purge the node of all published items (thus removing all items from the persistent store, with the exception of the last published item, which MAY be cached). In order to purge a node of all items, a node owner MUST send a node purge request, consisting of a <purge/> element whose 'node' attribute specifies the NodeID of the node to be purged.</p>
<examplecaption='Owner purges all items from a node'><![CDATA[
<p>If no error occurs, the service MUST purge the node and inform the owner of success.</p>
<examplecaption='Service replies with success'><![CDATA[
<iqtype='result'
from='pubsub.shakespeare.lit'
id='purge1'/>
]]></example>
<p>If the node or service has been configured to notify subscribers on deletion of items, a purge request MUST NOT result in sending the same notifications as are sent when deleting items (since purging a node with many persisted items could result in a large number of notifications); instead, the node MUST send a single notification to each subscriber, containing an empty <purge/> child element.</p>
<examplecaption='Subscribers are notified of node purge'><![CDATA[
<p>There are several reasons why the node purge request might fail:</p>
<ol>
<li>The node or service does not support node purging.</li>
<li>The requesting entity does not have sufficient privileges to purge the node.</li>
<li>The node is not configured to persist items.</li>
<li>The specified node does not exist.</li>
</ol>
<p>These error cases are described more fully below.</p>
<p>If the node or service does not support node purging, it MUST return a &feature; error, specifying a pubsub-specific error condition of <unsupported/> and a feature of "purge-nodes".</p>
<examplecaption='Service does not support node purging'><![CDATA[
<p>If the requesting entity does not have sufficient privileges to purge the node (e.g., because it is not a node owner), the service MUST return a &forbidden; error.</p>
<examplecaption='Entity is not an owner'><![CDATA[
<p>If the service or node does not persist items (e.g., because the node is a collection node), it MUST return a &feature; error, specifying a pubsub-specific error condition of <unsupported/> and a feature of "persistent-items".</p>
<examplecaption='Node is not configured for persistent items'><![CDATA[
<p>A service MAY send subscription approval requests to the node owner(s) at any time. An approval request consists of a message stanza containing a Data Form scoped by the "http://jabber.org/protocol/pubsub#subscribe_authorization" FORM_TYPE. The form MUST contain a boolean field that has a 'var' attribute of "pubsub#allow", which is the field that designates whether or not to allow the subscription request. The form SHOULD include fields that specify the node identifier, the subscription id (if applicable), and the JID of the pending subscriber. The message MAY include a &BODY; element that contains natural-language text explaining that the message contains a pending subscription form.</p>
<examplecaption='Service sends authorization request to node owner'><![CDATA[
label='Allow this JID to subscribe to this pubsub node?'>
<value>false</value>
</field>
</x>
</message>
]]></example>
<p>In order to approve the request, the owner shall submit the form and set the "pubsub#allow" field to a value of "1" or "true"; for tracking purposes the message MUST reflect the 'id' attribute originally provided.</p>
<p>The service then SHOULD send notification to the approved subscriber (see the <linkurl='#impl-subchange'>Notification of Subscription State Changes</link> section of this document).</p>
<p>In order to deny the request, the owner shall submit the form and set the "pubsub#allow" field to a value of "0" or "false"; as above, the message MUST reflect the 'id' attribute originally provided.</p>
<p>The service then SHOULD send notification to the denied subscriber (see the <linkurl='#impl-subchange'>Notification of Subscription State Changes</link> section of this document).</p>
<p>The service MUST check the "pubsub#allow" field to see if the subscription should be allowed or denied. If the owner cancels the Data Form, then the subscription request MUST remain in the pending state.</p>
<section3topic='Request All Pending Subscription Requests'anchor='owner-subreq-all'>
<p>A service MAY allow owners to request all the current pending subscription requests for all of their nodes at the service. Implementations MUST use the &xep0050; protocol to provide this functionality. The command name ('node' attribute of the command element) MUST have a value of "http://jabber.org/protocol/pubsub#get-pending".</p>
<p>If no error occurs, the service SHOULD return a data form for managing subscription requests, which MUST contain a single field with a 'var' attribute value of "node" whose <option/> elements specify the nodes for which the requesting entity has subscription approval privileges (as an optimization, the service MAY specify only the nodes that have subscription requests pending).</p>
<examplecaption='Service responds with data form to be populated'><![CDATA[
<p>If the service does not support the "get-pending" feature, it MUST respond with a &feature; error, specifying a pubsub-specific error condition of <unsupported/> and a feature of "get-pending".</p>
<examplecaption='Service responds with node not found'><![CDATA[
<p>If the requesting entity does not have sufficient privileges to approve subscription requests, the service MUST respond with a &forbidden; error.</p>
<examplecaption='Entity does not have sufficient privileges to approve subscription requests'><![CDATA[
<p>Upon receiving the data form for managing subscription requests, the owner then MAY request pending subscription approval requests for a given node.</p>
<examplecaption='Owner requests all pending subscription requests for a node'><![CDATA[
<p>If no error occurs, the service shall respond with success.</p>
<examplecaption='Service responds with success'><![CDATA[
<iqtype='result'
from='pubsub.shakespeare.lit'
to='hamlet@denmark.lit/elsinore'
id='pending2'/>
]]></example>
<p>The service shall then send one subscription approval message for each pending subscription request, as shown above for a single pending subscription request.</p>
<p>Note: A service SHOULD conform to its affiliation policies in maintaining the list of pending subscriptions. In particular, if the affiliation of an entity with a pending subscription is modified to owner or publisher, the service SHOULD automatically approve the subscription request and remove the entity's previous request from the pending list. Similarly, if the affiliation of an entity with a pending subscription is modified to outcast, the service SHOULD automatically reject the subscription request and remove the entity's previous request from the pending list.</p>
<p>If an entity's subscription request is denied, the service SHOULD send a &MESSAGE; to the entity, where the message conforms to the format described in the <linkurl='#impl-unsub'>Notification of Subscription Denial or Cancellation</link> section of this document.</p>
<p>A service MAY allow a node owner to edit the list of subscriptions associated with a given node and to set subscriptions for new entities (for nodes of type "whitelist", this enables the node owner to add subscribers); if so, it MUST advertise support for the "pubsub#manage-subscriptions" feature.</p>
<p>In order to request a list of all subscriptions, a node owner MUST send a subscriptions request, consisting of a <subscriptions/> element whose 'node' attribute specifies the NodeID of the relevant node.</p>
<examplecaption='Owner requests all subscriptions'><![CDATA[
<p>If no error occurs, the service MUST return the list of subscriptions for entities whose subscription state is "subscribed" or "unconfigured" (it MUST NOT return entities whose subscription state is "none" and SHOULD NOT return entities whose subscription state is "pending"). The result MAY specify multiple <subscription/> elements for the same entity (JID), but each element MUST possess a distinct value of the 'subid' attribute (as shown below).</p>
<examplecaption='Service returns list of subscriptions'><![CDATA[
<p>There are several reasons why the manage subscriptions request might fail:</p>
<ol>
<li>The service does not support subscription management.</li>
<li>The requesting entity does not have sufficient privileges to manage subscriptions.</li>
<li>The specified node does not exist.</li>
</ol>
<p>These error cases are described more fully below.</p>
<p>If an implementation does not support subscription management, it MUST return a &feature; error, specifying a pubsub-specific error condition of <unsupported/> and a feature of "manage-subscriptions".</p>
<examplecaption='Node or service does not support subscription management'><![CDATA[
<p>Upon receiving the subscriptions list, the node owner MAY modify subscription states. The owner MUST send only modified subscription states (i.e., a "delta"), not the complete list. (Note: If the 'subscription' attribute is not specified in a modification request, then the value MUST NOT be changed.)</p>
<examplecaption='Service responds with success'><![CDATA[
<iqtype='result'
from='pubsub.shakespeare.lit'
id='subman2'/>
]]></example>
<p>In order to remove an entity from the subscriptions list, the owner MUST set the value of the 'subscription' attribute to "none" and the service MUST remove that entity from the subscriptions list and not return it in response to future list requests.</p>
<p>The owner MAY change multiple subscriptions in a single request. If one of the entity elements specified is invalid, the service MUST return an IQ error (which SHOULD be ¬acceptable;) with the invalid entries, where the subscription returned is the original, un-altered subscription.</p>
<examplecaption='Owner sets subscription for multiple entities'><![CDATA[
<p>If errors occur during a modification request for multiple entities, the pubsub service MUST return any <subscription/> element(s) which caused the error. Returned entities which failed to be modified MUST include the existing 'subscription' attribute. Any entity elements which are not returned in an IQ error case MUST be treated as successful modifications. The owner MAY specify multiple <subscription/> elements for the same entity, but each element MUST possess a distinct value of the 'subid' attribute.</p>
<p>An implementation SHOULD send notification to an entity whose subscription has changed (see the <linkurl='#impl-subchange'>Notification of Subscription State Changes</link> section of this document).</p>
<examplecaption='Service sends notification of subscription change'><![CDATA[
<p>A service MAY allow a node owner to edit the affiliations of entities associated with a given node and to set affiliations for new entities; if so, it MUST advertise support for the "pubsub#modify-affiliations" feature.</p>
<p>In order to request a list of all affiliated entities, a node owner MUST send an affiliations request, consisting of an <affiliations/> element whose 'node' attribute specifies the NodeID of the relevant node.</p>
<examplecaption='Owner requests all affiliated entities'><![CDATA[
<p>If no error occurs, the service MUST return the list of entities whose affiliation is "owner", "publisher", or "outcast" (it MUST NOT return entities whose affiliation is "none").</p>
<examplecaption='Service returns list of affiliated entities'><![CDATA[
<p>There are several reasons why the affiliated entities request might fail:</p>
<ol>
<li>The service does not support modification of affiliations.</li>
<li>The requesting entity does not have sufficient privileges to modify affiliations.</li>
<li>The specified node does not exist.</li>
</ol>
<p>These error cases are described more fully below.</p>
<p>If an implementation does not support modification of affiliations, it MUST return a &feature; error, specifying a pubsub-specific error condition of <unsupported/> and a feature of "modify-affiliations".</p>
<examplecaption='Node or service does not support affiliation management'><![CDATA[
<p>Upon receiving the affiliations list, the node owner MAY modify affiliations. The owner MUST send only modified affiliations (i.e., a "delta"), not the complete list. (Note: If the 'affiliation' attribute is not specified in a modification request, then the value MUST NOT be changed.)</p>
<examplecaption='Service responds with success'><![CDATA[
<iqtype='result'
from='pubsub.shakespeare.lit'
id='ent2'/>
]]></example>
<p>In order to remove an entity from the affiliations list, the owner MUST set the value of the 'affiliation' attribute to "none" and the service MUST remove that entity from the affiliations list and not return it in response to future list requests.</p>
<p>The owner MAY change multiple affiliations in a single request. If one of the entity elements specified is invalid, the service MUST return an IQ error (which SHOULD be ¬acceptable;) with the invalid entries, where the affiliation returned is the original, un-altered affiliation.</p>
<p>The following example shows an entity attempting to make the owner something other than an affiliation of "owner", an action which MUST NOT be allowed if there is only one owner.</p>
<examplecaption='Owner sets affiliation for multiple entities'><![CDATA[
<p>The state chart at the beginning of this document is a MUST-IMPLEMENT set of rules for checking possible state transitions. Implementations MAY enforce other (more strict) rules. If errors occur during a modification request for multiple entities, the pubsub service MUST return any <affiliation/> element(s) which caused the error. Returned entities which failed to be modified MUST include the existing 'affiliation' attribute. Any entity elements which are not returned in an IQ error case MUST be treated as successful modifications. The owner MUST NOT specify multiple <affiliation/> elements for the same entity; otherwise the service MUST return a &badrequest; error.</p>
<p>An implementation MAY send a message to an entity whose affiliation has changed, which MAY contain a &BODY; element specifying natural-language text regarding the affiliation change and which SHOULD contain the modified affiliation data.</p>
<examplecaption='Service sends notification of affiliation change'><![CDATA[
<p>A pubsub service MAY support collection nodes as well as leaf nodes. Collections enable nodes to be grouped together in any way, including hierarchies and directed acyclic graphs. Collections MUST contain only leaf nodes and/or other collections. Collections MUST NOT contain published items, since only leaf nodes are allowed to contain items (therefore a collection MUST NOT support the "publish" feature or related features such as "persistent-items"). If collections are supported, a service MUST advertise that fact in its "disco#info" responses by including a feature of "pubsub#collections" and MUST support service discovery of child nodes as described in the <linkurl='#entity-nodes'>Discover Nodes</link> section of this document.</p>
<section2topic='Subscribe to a Collection Node'anchor='collections-subscribe'>
<p>A service that implements collection nodes SHOULD allow entities to subscribe to collection nodes (subject to access models and local security policies).</p>
<p>In addition to the subscription configuration options already defined, there are two subscription configuration options specific to collection nodes:</p>
<ul>
<li>
<p><strong>pubsub#subscription_type</strong></p>
<p>This subscription option enables the subscriber to subscribe either to items or to nodes.</p>
<p>If the subscription type is "items", the subscriber shall be notified whenever any node contained in the collection generates a notification (e.g., when an item is published or deleted), as modified by the value of the "pubsub#subscription_depth" option.</p>
<p>If the subscription type is "nodes", the subscriber shall be notified whenever a new node is added to the collection, as modified by the value of the "pubsub#subscription_depth" option.</p>
<p>The default value of this subscription option MUST be "nodes".</p>
</li>
<li>
<p><strong>pubsub#subscription_depth</strong></p>
<p>This subscription option enables the subscriber to specify whether it wants to receive notifications only from first-level children of the collection (a value of "1") or from all descendents (a value of "all").</p>
<p>For subscriptions of type "items", this enables the subscriber to be informed only when an item is published to a leaf node that is a direct child of the collection node to which it has subscribed, or to be informed whenever an item is published to any leaf node in the "tree" that begins at the level of the collection to which it has subscribed.</p>
<p>For subscriptions of type "nodes", this enables the subscriber to be informed only when a new node is added in the specific collection to which it has subscribed, or to be informed whenever a node is added anywhere in the "tree" that begins at the level of the collection to which it has subscribed.</p>
<p>The default value of this subscription option MUST be "1".</p>
</li>
</ul>
<p>In order to subscribe to a collection node, an entity MUST send a subscription request to the node; the subscription request MAY include subscription options, but this is not strictly necessary (especially if the entity does not wish to override the default settings for the "pubsub#subscription_type" and "pubsub#subscription_depth" options).</p>
<examplecaption='Entity subscribes to a collection node (no configuration)'><![CDATA[
<iqtype='set'
from='francisco@denmark.lit/barracks'
to='pubsub.shakespeare.lit'
id='collsub1'>
<pubsubxmlns='http://jabber.org/protocol/pubsub'>
<subscribejid='francisco@denmark.lit'
node='blogs'/>
</pubsub>
</iq>
]]></example>
<p>The subscriber will now receive notification of new first-level nodes created within the "blogs" collection.</p>
<examplecaption='Entity subscribes to a collection node (with configuration)'><![CDATA[
<p>The subscriber will now receive item notifications from nodes at any depth within the "blogs" collection.</p>
<p>Depending on the nature of the node "tree", a subscription type of "items" and depth of "all" may result in an extremely large number of notifications. Therefore, a service MAY disallow such a combination of subscription options, in which case it MUST return a ¬allowed; error to the requesting entity.</p>
<p>A service MAY allow an entity to subscribe to a collection node in two ways, once with a subscription of type "nodes" (to receive notification of any new nodes added to the collection or the entire tree) and once with a subscription of type "items" (to receive all items published within the tree). However, a service SHOULD NOT allow an entity to subscribe twice to a collection node (once with a subscription depth of "1" and once with a subscription depth of "all") for the same subscription type, since two such subscriptions are unnecessary (a depth of "all" includes by definition a depth of "1"); in this case the service SHOULD return a &conflict; error to the requesting entity.</p>
<p>A service that implements collections SHOULD support a root collection. The root collection shall be identified by the lack of a node identifier (i.e., the address of the pubsub service itself, such as "pubsub.shakespeare.lit").</p>
<p>Subscribing to this node with a subscription of type "nodes" and a depth of "1" enables an entity to be notified whenever a new first-level node is created at the pubsub service. Subscribing to this node with a subscription of type "nodes" and a depth of "all" enables an entity to be notified whenever a new node is created anywhere at the pubsub service.</p>
<examplecaption='Entity subscribes to the root collection node'><![CDATA[
<iqtype='set'
from='francisco@denmark.lit/barracks'
to='pubsub.shakespeare.lit'
id='root1'>
<pubsubxmlns='http://jabber.org/protocol/pubsub'>
<subscribejid='francisco@denmark.lit'/>
</pubsub>
</iq>
]]></example>
<p>In order to send notification of new nodes, the service shall send an event that contains a <collection/> element that in turns contains a <node/> element whose 'id' attribute specifies the NodeID of the new node.</p>
<examplecaption='Notification of new node'><![CDATA[
<section2topic='Create a New Collection Node'anchor='collections-createnode'>
<p>To create a new collection node, the requesting entity MUST include a Data Form containing a 'pubsub#node_type' field whose <value/> is "collection".</p>
<examplecaption='Entity requests a new collection node'><![CDATA[
<examplecaption='Service responds with success'><![CDATA[
<iqtype='result'
from='pubsub.shakespeare.lit'
to='bard@shakespeare.lit/globe'
id='create3'/>
]]></example>
<p>In addition to the errors already defined for leaf node creation, there are several reasons why the collection node creation request might fail:</p>
<ol>
<li>The service does not support collection nodes.</li>
<li>The service does not support creation of collection nodes.</li>
<li>The requesting entity does not have sufficient privileges to create collection nodes.</li>
</ol>
<p>These error cases are described more fully below.</p>
<p>If the service does not support collection nodes, it MUST respond with a &feature; error, specifying a pubsub-specific error condition of <unsupported/> and a feature of "collections".</p>
<examplecaption='Service does not support collection nodes'><