/* HTTP support. Copyright (C) 1995, 1996, 1997, 1998, 2000 Free Software Foundation, Inc. This file is part of Wget. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #include #include #include #include #ifdef HAVE_STRING_H # include #else # include #endif #ifdef HAVE_UNISTD_H # include #endif #include #include #if TIME_WITH_SYS_TIME # include # include #else # if HAVE_SYS_TIME_H # include # else # include # endif #endif #ifdef WINDOWS # include #else # include /* for h_errno */ #endif #include "wget.h" #include "utils.h" #include "url.h" #include "host.h" #include "rbuf.h" #include "retr.h" #include "headers.h" #include "connect.h" #include "fnmatch.h" #include "netrc.h" #if USE_DIGEST # include "md5.h" #endif #ifdef HAVE_SSL # include "gen_sslfunc.h" #endif /* HAVE_SSL */ extern char *version_string; #ifndef errno extern int errno; #endif #ifndef h_errno # ifndef __CYGWIN__ extern int h_errno; # endif #endif #define TEXTHTML_S "text/html" #define HTTP_ACCEPT "*/*" /* Some status code validation macros: */ #define H_20X(x) (((x) >= 200) && ((x) < 300)) #define H_PARTIAL(x) ((x) == HTTP_STATUS_PARTIAL_CONTENTS) #define H_REDIRECTED(x) (((x) == HTTP_STATUS_MOVED_PERMANENTLY) \ || ((x) == HTTP_STATUS_MOVED_TEMPORARILY)) /* HTTP/1.0 status codes from RFC1945, provided for reference. */ /* Successful 2xx. */ #define HTTP_STATUS_OK 200 #define HTTP_STATUS_CREATED 201 #define HTTP_STATUS_ACCEPTED 202 #define HTTP_STATUS_NO_CONTENT 204 #define HTTP_STATUS_PARTIAL_CONTENTS 206 /* Redirection 3xx. */ #define HTTP_STATUS_MULTIPLE_CHOICES 300 #define HTTP_STATUS_MOVED_PERMANENTLY 301 #define HTTP_STATUS_MOVED_TEMPORARILY 302 #define HTTP_STATUS_NOT_MODIFIED 304 /* Client error 4xx. */ #define HTTP_STATUS_BAD_REQUEST 400 #define HTTP_STATUS_UNAUTHORIZED 401 #define HTTP_STATUS_FORBIDDEN 403 #define HTTP_STATUS_NOT_FOUND 404 /* Server errors 5xx. */ #define HTTP_STATUS_INTERNAL 500 #define HTTP_STATUS_NOT_IMPLEMENTED 501 #define HTTP_STATUS_BAD_GATEWAY 502 #define HTTP_STATUS_UNAVAILABLE 503 /* Parse the HTTP status line, which is of format: HTTP-Version SP Status-Code SP Reason-Phrase The function returns the status-code, or -1 if the status line is malformed. The pointer to reason-phrase is returned in RP. */ static int parse_http_status_line (const char *line, const char **reason_phrase_ptr) { /* (the variables must not be named `major' and `minor', because that breaks compilation with SunOS4 cc.) */ int mjr, mnr, statcode; const char *p; *reason_phrase_ptr = NULL; /* The standard format of HTTP-Version is: `HTTP/X.Y', where X is major version, and Y is minor version. */ if (strncmp (line, "HTTP/", 5) != 0) return -1; line += 5; /* Calculate major HTTP version. */ p = line; for (mjr = 0; ISDIGIT (*line); line++) mjr = 10 * mjr + (*line - '0'); if (*line != '.' || p == line) return -1; ++line; /* Calculate minor HTTP version. */ p = line; for (mnr = 0; ISDIGIT (*line); line++) mnr = 10 * mnr + (*line - '0'); if (*line != ' ' || p == line) return -1; /* Wget will accept only 1.0 and higher HTTP-versions. The value of minor version can be safely ignored. */ if (mjr < 1) return -1; ++line; /* Calculate status code. */ if (!(ISDIGIT (*line) && ISDIGIT (line[1]) && ISDIGIT (line[2]))) return -1; statcode = 100 * (*line - '0') + 10 * (line[1] - '0') + (line[2] - '0'); /* Set up the reason phrase pointer. */ line += 3; /* RFC2068 requires SPC here, but we allow the string to finish here, in case no reason-phrase is present. */ if (*line != ' ') { if (!*line) *reason_phrase_ptr = line; else return -1; } else *reason_phrase_ptr = line + 1; return statcode; } /* Functions to be used as arguments to header_process(): */ struct http_process_range_closure { long first_byte_pos; long last_byte_pos; long entity_length; }; /* Parse the `Content-Range' header and extract the information it contains. Returns 1 if successful, -1 otherwise. */ static int http_process_range (const char *hdr, void *arg) { struct http_process_range_closure *closure = (struct http_process_range_closure *)arg; long num; /* Certain versions of Nutscape proxy server send out `Content-Length' without "bytes" specifier, which is a breach of RFC2068 (as well as the HTTP/1.1 draft which was current at the time). But hell, I must support it... */ if (!strncasecmp (hdr, "bytes", 5)) { hdr += 5; hdr += skip_lws (hdr); if (!*hdr) return 0; } if (!ISDIGIT (*hdr)) return 0; for (num = 0; ISDIGIT (*hdr); hdr++) num = 10 * num + (*hdr - '0'); if (*hdr != '-' || !ISDIGIT (*(hdr + 1))) return 0; closure->first_byte_pos = num; ++hdr; for (num = 0; ISDIGIT (*hdr); hdr++) num = 10 * num + (*hdr - '0'); if (*hdr != '/' || !ISDIGIT (*(hdr + 1))) return 0; closure->last_byte_pos = num; ++hdr; for (num = 0; ISDIGIT (*hdr); hdr++) num = 10 * num + (*hdr - '0'); closure->entity_length = num; return 1; } /* Place 1 to ARG if the HDR contains the word "none", 0 otherwise. Used for `Accept-Ranges'. */ static int http_process_none (const char *hdr, void *arg) { int *where = (int *)arg; if (strstr (hdr, "none")) *where = 1; else *where = 0; return 1; } /* Place the malloc-ed copy of HDR hdr, to the first `;' to ARG. */ static int http_process_type (const char *hdr, void *arg) { char **result = (char **)arg; /* Locate P on `;' or the terminating zero, whichever comes first. */ const char *p = strchr (hdr, ';'); if (!p) p = hdr + strlen (hdr); while (p > hdr && ISSPACE (*(p - 1))) --p; *result = strdupdelim (hdr, p); return 1; } /* Check whether the `Connection' header is set to "keep-alive". */ static int http_process_connection (const char *hdr, void *arg) { int *flag = (int *)arg; if (!strcasecmp (hdr, "Keep-Alive")) *flag = 1; return 1; } /* Persistent connections. Currently, we cache the most recently used connection as persistent, provided that the HTTP server agrees to make it such. The persistence data is stored in the variables below. Ideally, it would be in a structure, and it should be possible to cache an arbitrary fixed number of these connections. I think the code is quite easy to extend in that direction. */ /* Whether a persistent connection is active. */ static int pc_active_p; /* Host and port of currently active persistent connection. */ static unsigned char pc_last_host[4]; static unsigned short pc_last_port; /* File descriptor of the currently active persistent connection. */ static int pc_last_fd; #ifdef HAVE_SSL /* Whether a ssl handshake has occoured on this connection */ static int pc_active_ssl; /* SSL connection of the currently active persistent connection. */ static SSL *pc_last_ssl; #endif /* HAVE_SSL */ /* Mark the persistent connection as invalid. This is used by the CLOSE_* macros after they forcefully close a registered persistent connection. This does not close the file descriptor -- it is left to the caller to do that. (Maybe it should, though.) */ static void invalidate_persistent (void) { pc_active_p = 0; #ifdef HAVE_SSL pc_active_ssl = 0; #endif /* HAVE_SSL */ DEBUGP (("Invalidating fd %d from further reuse.\n", pc_last_fd)); } /* Register FD, which should be a TCP/IP connection to HOST:PORT, as persistent. This will enable someone to use the same connection later. In the context of HTTP, this must be called only AFTER the response has been received and the server has promised that the connection will remain alive. If a previous connection was persistent, it is closed. */ static void register_persistent (const char *host, unsigned short port, int fd #ifdef HAVE_SSL , SSL *ssl #endif ) { int success; if (pc_active_p) { if (pc_last_fd == fd) { /* The connection FD is already registered. Nothing to do. */ return; } else { /* The old persistent connection is still active; let's close it first. This situation arises whenever a persistent connection exists, but we then connect to a different host, and try to register a persistent connection to that one. */ #ifdef HAVE_SSL /* The ssl disconnect has to take place before the closing of pc_last_fd. */ if (pc_last_ssl) shutdown_ssl(pc_last_ssl); #endif CLOSE (pc_last_fd); invalidate_persistent (); } } /* This store_hostaddress may not fail, because it has the results in the cache. */ success = store_hostaddress (pc_last_host, host); assert (success); pc_last_port = port; pc_last_fd = fd; pc_active_p = 1; #ifdef HAVE_SSL pc_last_ssl = ssl; pc_active_ssl = ssl ? 1 : 0; #endif DEBUGP (("Registered fd %d for persistent reuse.\n", fd)); } /* Return non-zero if a persistent connection is available for connecting to HOST:PORT. */ static int persistent_available_p (const char *host, unsigned short port #ifdef HAVE_SSL , int ssl #endif ) { unsigned char this_host[4]; /* First, check whether a persistent connection is active at all. */ if (!pc_active_p) return 0; /* Second, check if the active connection pertains to the correct (HOST, PORT) ordered pair. */ if (port != pc_last_port) return 0; #ifdef HAVE_SSL /* Second, a): check if current connection is (not) ssl, too. This test is unlikely to fail because HTTP and HTTPS typicaly use different ports. Yet it is possible, or so I [Christian Fraenkel] have been told, to run HTTPS and HTTP simultaneus on the same port. */ if (ssl != pc_active_ssl) return 0; #endif /* HAVE_SSL */ if (!store_hostaddress (this_host, host)) return 0; if (memcmp (pc_last_host, this_host, 4)) return 0; /* Third: check whether the connection is still open. This is important because most server implement a liberal (short) timeout on persistent connections. Wget can of course always reconnect if the connection doesn't work out, but it's nicer to know in advance. This test is a logical followup of the first test, but is "expensive" and therefore placed at the end of the list. */ if (!test_socket_open (pc_last_fd)) { /* Oops, the socket is no longer open. Now that we know that, let's invalidate the persistent connection before returning 0. */ CLOSE (pc_last_fd); invalidate_persistent (); return 0; } return 1; } #ifdef HAVE_SSL # define SHUTDOWN_SSL(ssl) do { \ if (ssl) \ shutdown_ssl (ssl); \ } while (0) #else # define SHUTDOWN_SSL(ssl) #endif /* The idea behind these two CLOSE macros is to distinguish between two cases: one when the job we've been doing is finished, and we want to close the connection and leave, and two when something is seriously wrong and we're closing the connection as part of cleanup. In case of keep_alive, CLOSE_FINISH should leave the connection open, while CLOSE_INVALIDATE should still close it. Note that the semantics of the flag `keep_alive' is "this connection *will* be reused (the server has promised not to close the connection once we're done)", while the semantics of `pc_active_p && (fd) == pc_last_fd' is "we're *now* using an active, registered connection". */ #define CLOSE_FINISH(fd) do { \ if (!keep_alive) \ { \ SHUTDOWN_SSL (ssl); \ CLOSE (fd); \ if (pc_active_p && (fd) == pc_last_fd) \ invalidate_persistent (); \ } \ } while (0) #define CLOSE_INVALIDATE(fd) do { \ SHUTDOWN_SSL (ssl); \ CLOSE (fd); \ if (pc_active_p && (fd) == pc_last_fd) \ invalidate_persistent (); \ } while (0) struct http_stat { long len; /* received length */ long contlen; /* expected length */ long restval; /* the restart value */ int res; /* the result of last read */ char *newloc; /* new location (redirection) */ char *remote_time; /* remote time-stamp string */ char *error; /* textual HTTP error */ int statcode; /* status code */ long dltime; /* time of the download */ int no_truncate; /* whether truncating the file is forbidden. */ }; /* Free the elements of hstat X. */ #define FREEHSTAT(x) do \ { \ FREE_MAYBE ((x).newloc); \ FREE_MAYBE ((x).remote_time); \ FREE_MAYBE ((x).error); \ (x).newloc = (x).remote_time = (x).error = NULL; \ } while (0) static char *create_authorization_line PARAMS ((const char *, const char *, const char *, const char *, const char *)); static char *basic_authentication_encode PARAMS ((const char *, const char *, const char *)); static int known_authentication_scheme_p PARAMS ((const char *)); static time_t http_atotm PARAMS ((char *)); #define BEGINS_WITH(line, string_constant) \ (!strncasecmp (line, string_constant, sizeof (string_constant) - 1) \ && (ISSPACE (line[sizeof (string_constant) - 1]) \ || !line[sizeof (string_constant) - 1])) /* Retrieve a document through HTTP protocol. It recognizes status code, and correctly handles redirections. It closes the network socket. If it receives an error from the functions below it, it will print it if there is enough information to do so (almost always), returning the error to the caller (i.e. http_loop). Various HTTP parameters are stored to hs. Although it parses the response code correctly, it is not used in a sane way. The caller can do that, though. If u->proxy is non-NULL, the URL u will be taken as a proxy URL, and u->proxy->url will be given to the proxy server (bad naming, I'm afraid). */ static uerr_t gethttp (struct urlinfo *u, struct http_stat *hs, int *dt) { char *request, *type, *command, *path; char *user, *passwd; char *pragma_h, *referer, *useragent, *range, *wwwauth, *remhost; char *authenticate_h; char *proxyauth; char *all_headers; char *port_maybe; char *request_keep_alive; int sock, hcount, num_written, all_length, remport, statcode; long contlen, contrange; struct urlinfo *ou; uerr_t err; FILE *fp; int auth_tried_already; struct rbuf rbuf; #ifdef HAVE_SSL static SSL_CTX *ssl_ctx = NULL; SSL *ssl = NULL; #endif /* HAVE_SSL */ /* Whether this connection will be kept alive after the HTTP request is done. */ int keep_alive; /* Flags that detect the two ways of specifying HTTP keep-alive response. */ int http_keep_alive_1, http_keep_alive_2; /* Whether keep-alive should be inhibited. */ int inhibit_keep_alive; #ifdef HAVE_SSL /* initialize ssl_ctx on first run */ if (!ssl_ctx) { err=init_ssl (&ssl_ctx); if (err != 0) { switch (err) { case SSLERRCTXCREATE: /* this is fatal */ logprintf (LOG_NOTQUIET, _("Failed to set up an SSL context\n")); ssl_printerrors (); return err; case SSLERRCERTFILE: /* try without certfile */ logprintf (LOG_NOTQUIET, _("Failed to load certificates from %s\n"), opt.sslcertfile); ssl_printerrors (); logprintf (LOG_NOTQUIET, _("Trying without the specified certificate\n")); break; case SSLERRCERTKEY: logprintf (LOG_NOTQUIET, _("Failed to get certificate key from %s\n"), opt.sslcertkey); ssl_printerrors (); logprintf (LOG_NOTQUIET, _("Trying without the specified certificate\n")); break; default: break; } } } #endif /* HAVE_SSL */ if (!(*dt & HEAD_ONLY)) /* If we're doing a GET on the URL, as opposed to just a HEAD, we need to know the local filename so we can save to it. */ assert (u->local != NULL); authenticate_h = 0; auth_tried_already = 0; inhibit_keep_alive = (!opt.http_keep_alive || u->proxy != NULL); again: /* We need to come back here when the initial attempt to retrieve without authorization header fails. (Expected to happen at least for the Digest authorization scheme.) */ keep_alive = 0; http_keep_alive_1 = http_keep_alive_2 = 0; /* Initialize certain elements of struct http_stat. */ hs->len = 0L; hs->contlen = -1; hs->res = -1; hs->newloc = NULL; hs->remote_time = NULL; hs->error = NULL; /* Which structure to use to retrieve the original URL data. */ if (u->proxy) ou = u->proxy; else ou = u; /* First: establish the connection. */ if (inhibit_keep_alive || #ifndef HAVE_SSL !persistent_available_p (u->host, u->port) #else !persistent_available_p (u->host, u->port, (u->proto==URLHTTPS ? 1 : 0)) #endif /* HAVE_SSL */ ) { logprintf (LOG_VERBOSE, _("Connecting to %s:%hu... "), u->host, u->port); err = make_connection (&sock, u->host, u->port); switch (err) { case HOSTERR: logputs (LOG_VERBOSE, "\n"); logprintf (LOG_NOTQUIET, "%s: %s.\n", u->host, herrmsg (h_errno)); return HOSTERR; break; case CONSOCKERR: logputs (LOG_VERBOSE, "\n"); logprintf (LOG_NOTQUIET, "socket: %s\n", strerror (errno)); return CONSOCKERR; break; case CONREFUSED: logputs (LOG_VERBOSE, "\n"); logprintf (LOG_NOTQUIET, _("Connection to %s:%hu refused.\n"), u->host, u->port); CLOSE (sock); return CONREFUSED; case CONERROR: logputs (LOG_VERBOSE, "\n"); logprintf (LOG_NOTQUIET, "connect: %s\n", strerror (errno)); CLOSE (sock); return CONERROR; break; case NOCONERROR: /* Everything is fine! */ logputs (LOG_VERBOSE, _("connected!\n")); break; default: abort (); break; } #ifdef HAVE_SSL if (u->proto == URLHTTPS) if (connect_ssl (&ssl, ssl_ctx,sock) != 0) { logputs (LOG_VERBOSE, "\n"); logprintf (LOG_NOTQUIET, _("Unable to establish SSL connection.\n")); CLOSE (sock); return CONSSLERR; } #endif /* HAVE_SSL */ } else { logprintf (LOG_VERBOSE, _("Reusing connection to %s:%hu.\n"), u->host, u->port); /* #### pc_last_fd should be accessed through an accessor function. */ sock = pc_last_fd; #ifdef HAVE_SSL ssl = pc_last_ssl; #endif /* HAVE_SSL */ DEBUGP (("Reusing fd %d.\n", sock)); } if (u->proxy) path = u->proxy->url; else path = u->path; command = (*dt & HEAD_ONLY) ? "HEAD" : "GET"; referer = NULL; if (ou->referer) { referer = (char *)alloca (9 + strlen (ou->referer) + 3); sprintf (referer, "Referer: %s\r\n", ou->referer); } if (*dt & SEND_NOCACHE) pragma_h = "Pragma: no-cache\r\n"; else pragma_h = ""; if (hs->restval) { range = (char *)alloca (13 + numdigit (hs->restval) + 4); /* Gag me! Some servers (e.g. WebSitePro) have been known to respond to the following `Range' format by generating a multipart/x-byte-ranges MIME document! This MIME type was present in an old draft of the byteranges specification. HTTP/1.1 specifies a multipart/byte-ranges MIME type, but only if multiple non-overlapping ranges are requested -- which Wget never does. */ sprintf (range, "Range: bytes=%ld-\r\n", hs->restval); } else range = NULL; if (opt.useragent) STRDUP_ALLOCA (useragent, opt.useragent); else { useragent = (char *)alloca (10 + strlen (version_string)); sprintf (useragent, "Wget/%s", version_string); } /* Construct the authentication, if userid is present. */ user = ou->user; passwd = ou->passwd; search_netrc (u->host, (const char **)&user, (const char **)&passwd, 0); user = user ? user : opt.http_user; passwd = passwd ? passwd : opt.http_passwd; wwwauth = NULL; if (user && passwd) { if (!authenticate_h) { /* We have the username and the password, but haven't tried any authorization yet. Let's see if the "Basic" method works. If not, we'll come back here and construct a proper authorization method with the right challenges. If we didn't employ this kind of logic, every URL that requires authorization would have to be processed twice, which is very suboptimal and generates a bunch of false "unauthorized" errors in the server log. #### But this logic also has a serious problem when used with stronger authentications: we *first* transmit the username and the password in clear text, and *then* attempt a stronger authentication scheme. That cannot be right! We are only fortunate that almost everyone still uses the `Basic' scheme anyway. There should be an option to prevent this from happening, for those who use strong authentication schemes and value their passwords. */ wwwauth = basic_authentication_encode (user, passwd, "Authorization"); } else { wwwauth = create_authorization_line (authenticate_h, user, passwd, command, ou->path); } } proxyauth = NULL; if (u->proxy) { char *proxy_user, *proxy_passwd; /* For normal username and password, URL components override command-line/wgetrc parameters. With proxy authentication, it's the reverse, because proxy URLs are normally the "permanent" ones, so command-line args should take precedence. */ if (opt.proxy_user && opt.proxy_passwd) { proxy_user = opt.proxy_user; proxy_passwd = opt.proxy_passwd; } else { proxy_user = u->user; proxy_passwd = u->passwd; } /* #### This is junky. Can't the proxy request, say, `Digest' authentication? */ if (proxy_user && proxy_passwd) proxyauth = basic_authentication_encode (proxy_user, proxy_passwd, "Proxy-Authorization"); } remhost = ou->host; remport = ou->port; /* String of the form :PORT. Used only for non-standard ports. */ port_maybe = NULL; #ifdef HAVE_SSL if (remport != (u->proto == URLHTTPS ? DEFAULT_HTTPS_PORT : DEFAULT_HTTP_PORT) ) #else if (remport != DEFAULT_HTTP_PORT) #endif { port_maybe = (char *)alloca (numdigit (remport) + 2); sprintf (port_maybe, ":%d", remport); } if (!inhibit_keep_alive) request_keep_alive = "Connection: Keep-Alive\r\n"; else request_keep_alive = NULL; /* Allocate the memory for the request. */ request = (char *)alloca (strlen (command) + strlen (path) + strlen (useragent) + strlen (remhost) + (port_maybe ? strlen (port_maybe) : 0) + strlen (HTTP_ACCEPT) + (request_keep_alive ? strlen (request_keep_alive) : 0) + (referer ? strlen (referer) : 0) + (wwwauth ? strlen (wwwauth) : 0) + (proxyauth ? strlen (proxyauth) : 0) + (range ? strlen (range) : 0) + strlen (pragma_h) + (opt.user_header ? strlen (opt.user_header) : 0) + 64); /* Construct the request. */ sprintf (request, "\ %s %s HTTP/1.0\r\n\ User-Agent: %s\r\n\ Host: %s%s\r\n\ Accept: %s\r\n\ %s%s%s%s%s%s%s\r\n", command, path, useragent, remhost, port_maybe ? port_maybe : "", HTTP_ACCEPT, request_keep_alive ? request_keep_alive : "", referer ? referer : "", wwwauth ? wwwauth : "", proxyauth ? proxyauth : "", range ? range : "", pragma_h, opt.user_header ? opt.user_header : ""); DEBUGP (("---request begin---\n%s---request end---\n", request)); /* Free the temporary memory. */ FREE_MAYBE (wwwauth); FREE_MAYBE (proxyauth); /* Send the request to server. */ #ifdef HAVE_SSL if (u->proto == URLHTTPS) num_written = ssl_iwrite (ssl, request, strlen (request)); else #endif /* HAVE_SSL */ num_written = iwrite (sock, request, strlen (request)); if (num_written < 0) { logprintf (LOG_VERBOSE, _("Failed writing HTTP request: %s.\n"), strerror (errno)); CLOSE_INVALIDATE (sock); return WRITEFAILED; } logprintf (LOG_VERBOSE, _("%s request sent, awaiting response... "), u->proxy ? "Proxy" : "HTTP"); contlen = contrange = -1; type = NULL; statcode = -1; *dt &= ~RETROKF; /* Before reading anything, initialize the rbuf. */ rbuf_initialize (&rbuf, sock); #ifdef HAVE_SSL if (u->proto == URLHTTPS) rbuf.ssl = ssl; else rbuf.ssl = NULL; #endif /* HAVE_SSL */ all_headers = NULL; all_length = 0; /* Header-fetching loop. */ hcount = 0; while (1) { char *hdr; int status; ++hcount; /* Get the header. */ status = header_get (&rbuf, &hdr, /* Disallow continuations for status line. */ (hcount == 1 ? HG_NO_CONTINUATIONS : HG_NONE)); /* Check for errors. */ if (status == HG_EOF && *hdr) { /* This used to be an unconditional error, but that was somewhat controversial, because of a large number of broken CGI's that happily "forget" to send the second EOL before closing the connection of a HEAD request. So, the deal is to check whether the header is empty (*hdr is zero if it is); if yes, it means that the previous header was fully retrieved, and that -- most probably -- the request is complete. "...be liberal in what you accept." Oh boy. */ logputs (LOG_VERBOSE, "\n"); logputs (LOG_NOTQUIET, _("End of file while parsing headers.\n")); xfree (hdr); FREE_MAYBE (type); FREE_MAYBE (hs->newloc); FREE_MAYBE (all_headers); CLOSE_INVALIDATE (sock); return HEOF; } else if (status == HG_ERROR) { logputs (LOG_VERBOSE, "\n"); logprintf (LOG_NOTQUIET, _("Read error (%s) in headers.\n"), strerror (errno)); xfree (hdr); FREE_MAYBE (type); FREE_MAYBE (hs->newloc); FREE_MAYBE (all_headers); CLOSE_INVALIDATE (sock); return HERR; } /* If the headers are to be saved to a file later, save them to memory now. */ if (opt.save_headers) { int lh = strlen (hdr); all_headers = (char *)xrealloc (all_headers, all_length + lh + 2); memcpy (all_headers + all_length, hdr, lh); all_length += lh; all_headers[all_length++] = '\n'; all_headers[all_length] = '\0'; } /* Print the header if requested. */ if (opt.server_response && hcount != 1) logprintf (LOG_VERBOSE, "\n%d %s", hcount, hdr); /* Check for status line. */ if (hcount == 1) { const char *error; /* Parse the first line of server response. */ statcode = parse_http_status_line (hdr, &error); hs->statcode = statcode; /* Store the descriptive response. */ if (statcode == -1) /* malformed response */ { /* A common reason for "malformed response" error is the case when no data was actually received. Handle this special case. */ if (!*hdr) hs->error = xstrdup (_("No data received")); else hs->error = xstrdup (_("Malformed status line")); xfree (hdr); break; } else if (!*error) hs->error = xstrdup (_("(no description)")); else hs->error = xstrdup (error); if ((statcode != -1) #ifdef DEBUG && !opt.debug #endif ) logprintf (LOG_VERBOSE, "%d %s", statcode, error); goto done_header; } /* Exit on empty header. */ if (!*hdr) { xfree (hdr); break; } /* Try getting content-length. */ if (contlen == -1 && !opt.ignore_length) if (header_process (hdr, "Content-Length", header_extract_number, &contlen)) goto done_header; /* Try getting content-type. */ if (!type) if (header_process (hdr, "Content-Type", http_process_type, &type)) goto done_header; /* Try getting location. */ if (!hs->newloc) if (header_process (hdr, "Location", header_strdup, &hs->newloc)) goto done_header; /* Try getting last-modified. */ if (!hs->remote_time) if (header_process (hdr, "Last-Modified", header_strdup, &hs->remote_time)) goto done_header; /* Try getting www-authentication. */ if (!authenticate_h) if (header_process (hdr, "WWW-Authenticate", header_strdup, &authenticate_h)) goto done_header; /* Check for accept-ranges header. If it contains the word `none', disable the ranges. */ if (*dt & ACCEPTRANGES) { int nonep; if (header_process (hdr, "Accept-Ranges", http_process_none, &nonep)) { if (nonep) *dt &= ~ACCEPTRANGES; goto done_header; } } /* Try getting content-range. */ if (contrange == -1) { struct http_process_range_closure closure; if (header_process (hdr, "Content-Range", http_process_range, &closure)) { contrange = closure.first_byte_pos; goto done_header; } } /* Check for keep-alive related responses. */ if (!inhibit_keep_alive) { /* Check for the `Keep-Alive' header. */ if (!http_keep_alive_1) { if (header_process (hdr, "Keep-Alive", header_exists, &http_keep_alive_1)) goto done_header; } /* Check for `Connection: Keep-Alive'. */ if (!http_keep_alive_2) { if (header_process (hdr, "Connection", http_process_connection, &http_keep_alive_2)) goto done_header; } } done_header: xfree (hdr); } logputs (LOG_VERBOSE, "\n"); if (contlen != -1 && (http_keep_alive_1 || http_keep_alive_2)) { assert (inhibit_keep_alive == 0); keep_alive = 1; } if (keep_alive) /* The server has promised that it will not close the connection when we're done. This means that we can register it. */ #ifndef HAVE_SSL register_persistent (u->host, u->port, sock); #else register_persistent (u->host, u->port, sock, ssl); #endif /* HAVE_SSL */ if ((statcode == HTTP_STATUS_UNAUTHORIZED) && authenticate_h) { /* Authorization is required. */ FREE_MAYBE (type); type = NULL; FREEHSTAT (*hs); CLOSE_INVALIDATE (sock); /* would be CLOSE_FINISH, but there might be more bytes in the body. */ if (auth_tried_already) { /* If we have tried it already, then there is not point retrying it. */ failed: logputs (LOG_NOTQUIET, _("Authorization failed.\n")); xfree (authenticate_h); return AUTHFAILED; } else if (!known_authentication_scheme_p (authenticate_h)) { xfree (authenticate_h); logputs (LOG_NOTQUIET, _("Unknown authentication scheme.\n")); return AUTHFAILED; } else if (BEGINS_WITH (authenticate_h, "Basic")) { /* The authentication scheme is basic, the one we try by default, and it failed. There's no sense in trying again. */ goto failed; } else { auth_tried_already = 1; goto again; } } /* We do not need this anymore. */ if (authenticate_h) { xfree (authenticate_h); authenticate_h = NULL; } /* 20x responses are counted among successful by default. */ if (H_20X (statcode)) *dt |= RETROKF; if (type && !strncasecmp (type, TEXTHTML_S, strlen (TEXTHTML_S))) *dt |= TEXTHTML; else /* We don't assume text/html by default. */ *dt &= ~TEXTHTML; if (opt.html_extension && (*dt & TEXTHTML)) /* -E / --html-extension / html_extension = on was specified, and this is a text/html file. If some case-insensitive variation on ".htm[l]" isn't already the file's suffix, tack on ".html". */ { char* last_period_in_local_filename = strrchr(u->local, '.'); if (last_period_in_local_filename == NULL || !(strcasecmp(last_period_in_local_filename, ".htm") == EQ || strcasecmp(last_period_in_local_filename, ".html") == EQ)) { size_t local_filename_len = strlen(u->local); u->local = xrealloc(u->local, local_filename_len + sizeof(".html")); strcpy(u->local + local_filename_len, ".html"); *dt |= ADDED_HTML_EXTENSION; } } if (contrange == -1) { /* We did not get a content-range header. This means that the server did not honor our `Range' request. Normally, this means we should reset hs->restval and continue normally. */ /* However, if `-c' is used, we need to be a bit more careful: 1. If `-c' is specified and the file already existed when Wget was started, it would be a bad idea for us to start downloading it from scratch, effectively truncating it. I believe this cannot happen unless `-c' was specified. 2. If `-c' is used on a file that is already fully downloaded, we're requesting bytes after the end of file, which can result in server not honoring `Range'. If this is the case, `Content-Length' will be equal to the length of the file. */ if (opt.always_rest) { /* Check for condition #2. */ if (hs->restval == contlen) { logputs (LOG_VERBOSE, _("\ \n The file is already fully retrieved; nothing to do.\n\n")); /* In case the caller inspects. */ hs->len = contlen; hs->res = 0; FREE_MAYBE (type); FREE_MAYBE (hs->newloc); FREE_MAYBE (all_headers); CLOSE_INVALIDATE (sock); /* would be CLOSE_FINISH, but there might be more bytes in the body. */ return RETRFINISHED; } /* Check for condition #1. */ if (hs->no_truncate) { logprintf (LOG_NOTQUIET, _("\ The server does not support continued download; refusing to truncate `%s'.\n\n"), u->local); return CONTNOTSUPPORTED; } /* Fallthrough */ } hs->restval = 0; } else if (contrange != hs->restval || (H_PARTIAL (statcode) && contrange == -1)) { /* This means the whole request was somehow misunderstood by the server. Bail out. */ FREE_MAYBE (type); FREE_MAYBE (hs->newloc); FREE_MAYBE (all_headers); CLOSE_INVALIDATE (sock); return RANGEERR; } if (hs->restval) { if (contlen != -1) contlen += contrange; else contrange = -1; /* If conent-length was not sent, content-range will be ignored. */ } hs->contlen = contlen; /* Return if redirected. */ if (H_REDIRECTED (statcode) || statcode == HTTP_STATUS_MULTIPLE_CHOICES) { /* RFC2068 says that in case of the 300 (multiple choices) response, the server can output a preferred URL through `Location' header; otherwise, the request should be treated like GET. So, if the location is set, it will be a redirection; otherwise, just proceed normally. */ if (statcode == HTTP_STATUS_MULTIPLE_CHOICES && !hs->newloc) *dt |= RETROKF; else { logprintf (LOG_VERBOSE, _("Location: %s%s\n"), hs->newloc ? hs->newloc : _("unspecified"), hs->newloc ? _(" [following]") : ""); CLOSE_INVALIDATE (sock); /* would be CLOSE_FINISH, but there might be more bytes in the body. */ FREE_MAYBE (type); FREE_MAYBE (all_headers); return NEWLOCATION; } } if (opt.verbose) { if ((*dt & RETROKF) && !opt.server_response) { /* No need to print this output if the body won't be downloaded at all, or if the original server response is printed. */ logputs (LOG_VERBOSE, _("Length: ")); if (contlen != -1) { logputs (LOG_VERBOSE, legible (contlen)); if (contrange != -1) logprintf (LOG_VERBOSE, _(" (%s to go)"), legible (contlen - contrange)); } else logputs (LOG_VERBOSE, opt.ignore_length ? _("ignored") : _("unspecified")); if (type) logprintf (LOG_VERBOSE, " [%s]\n", type); else logputs (LOG_VERBOSE, "\n"); } } FREE_MAYBE (type); type = NULL; /* We don't need it any more. */ /* Return if we have no intention of further downloading. */ if (!(*dt & RETROKF) || (*dt & HEAD_ONLY)) { /* In case the caller cares to look... */ hs->len = 0L; hs->res = 0; FREE_MAYBE (type); FREE_MAYBE (all_headers); CLOSE_INVALIDATE (sock); /* would be CLOSE_FINISH, but there might be more bytes in the body. */ return RETRFINISHED; } /* Open the local file. */ if (!opt.dfp) { mkalldirs (u->local); if (opt.backups) rotate_backups (u->local); fp = fopen (u->local, hs->restval ? "ab" : "wb"); if (!fp) { logprintf (LOG_NOTQUIET, "%s: %s\n", u->local, strerror (errno)); CLOSE_INVALIDATE (sock); /* would be CLOSE_FINISH, but there might be more bytes in the body. */ FREE_MAYBE (all_headers); return FOPENERR; } } else /* opt.dfp */ { extern int global_download_count; fp = opt.dfp; /* To ensure that repeated "from scratch" downloads work for -O files, we rewind the file pointer, unless restval is non-zero. (This works only when -O is used on regular files, but it's still a valuable feature.) However, this loses when more than one URL is specified on the command line the second rewinds eradicates the contents of the first download. Thus we disable the above trick for all the downloads except the very first one. #### A possible solution to this would be to remember the file position in the output document and to seek to that position, instead of rewinding. */ if (!hs->restval && global_download_count == 0) { /* This will silently fail for streams that don't correspond to regular files, but that's OK. */ rewind (fp); /* ftruncate is needed because opt.dfp is opened in append mode if opt.always_rest is set. */ ftruncate (fileno (fp), 0); clearerr (fp); } } /* #### This confuses the code that checks for file size. There should be some overhead information. */ if (opt.save_headers) fwrite (all_headers, 1, all_length, fp); reset_timer (); /* Get the contents of the document. */ hs->res = get_contents (sock, fp, &hs->len, hs->restval, (contlen != -1 ? contlen : 0), &rbuf, keep_alive); hs->dltime = elapsed_time (); { /* Close or flush the file. We have to be careful to check for error here. Checking the result of fwrite() is not enough -- errors could go unnoticed! */ int flush_res; if (!opt.dfp) flush_res = fclose (fp); else flush_res = fflush (fp); if (flush_res == EOF) hs->res = -2; } FREE_MAYBE (all_headers); CLOSE_FINISH (sock); if (hs->res == -2) return FWRITEERR; return RETRFINISHED; } /* The genuine HTTP loop! This is the part where the retrieval is retried, and retried, and retried, and... */ uerr_t http_loop (struct urlinfo *u, char **newloc, int *dt) { int count; int use_ts, got_head = 0; /* time-stamping info */ char *filename_plus_orig_suffix; char *local_filename = NULL; char *tms, *suf, *locf, *tmrate; uerr_t err; time_t tml = -1, tmr = -1; /* local and remote time-stamps */ long local_size = 0; /* the size of the local file */ size_t filename_len; struct http_stat hstat; /* HTTP status */ struct stat st; *newloc = NULL; /* Warn on (likely bogus) wildcard usage in HTTP. Don't use has_wildcards_p because it would also warn on `?', and we know that shows up in CGI paths a *lot*. */ if (strchr (u->url, '*')) logputs (LOG_VERBOSE, _("Warning: wildcards not supported in HTTP.\n")); /* Determine the local filename. */ if (!u->local) u->local = url_filename (u->proxy ? u->proxy : u); if (!opt.output_document) locf = u->local; else locf = opt.output_document; /* Yuck. Multiple returns suck. We need to remember to free() the space we xmalloc() here before EACH return. This is one reason it's better to set flags that influence flow control and then return once at the end. */ filename_len = strlen(u->local); filename_plus_orig_suffix = xmalloc(filename_len + sizeof(".orig")); if (opt.noclobber && file_exists_p (u->local)) { /* If opt.noclobber is turned on and file already exists, do not retrieve the file */ logprintf (LOG_VERBOSE, _("\ File `%s' already there, will not retrieve.\n"), u->local); /* If the file is there, we suppose it's retrieved OK. */ *dt |= RETROKF; /* #### Bogusness alert. */ /* If its suffix is "html" or (yuck!) "htm", we suppose it's text/html, a harmless lie. */ if (((suf = suffix (u->local)) != NULL) && (!strcmp (suf, "html") || !strcmp (suf, "htm"))) *dt |= TEXTHTML; xfree (suf); xfree (filename_plus_orig_suffix); /* must precede every return! */ /* Another harmless lie: */ return RETROK; } use_ts = 0; if (opt.timestamping) { boolean local_dot_orig_file_exists = FALSE; if (opt.backup_converted) /* If -K is specified, we'll act on the assumption that it was specified last time these files were downloaded as well, and instead of just comparing local file X against server file X, we'll compare local file X.orig (if extant, else X) against server file X. If -K _wasn't_ specified last time, or the server contains files called *.orig, -N will be back to not operating correctly with -k. */ { /* Would a single s[n]printf() call be faster? --dan Definitely not. sprintf() is horribly slow. It's a different question whether the difference between the two affects a program. Usually I'd say "no", but at one point I profiled Wget, and found that a measurable and non-negligible amount of time was lost calling sprintf() in url.c. Replacing sprintf with inline calls to strcpy() and long_to_string() made a difference. --hniksic */ strcpy(filename_plus_orig_suffix, u->local); strcpy(filename_plus_orig_suffix + filename_len, ".orig"); /* Try to stat() the .orig file. */ if (stat(filename_plus_orig_suffix, &st) == 0) { local_dot_orig_file_exists = TRUE; local_filename = filename_plus_orig_suffix; } } if (!local_dot_orig_file_exists) /* Couldn't stat() .orig, so try to stat() . */ if (stat (u->local, &st) == 0) local_filename = u->local; if (local_filename != NULL) /* There was a local file, so we'll check later to see if the version the server has is the same version we already have, allowing us to skip a download. */ { use_ts = 1; tml = st.st_mtime; local_size = st.st_size; got_head = 0; } } /* Reset the counter. */ count = 0; *dt = 0 | ACCEPTRANGES; /* THE loop */ do { /* Increment the pass counter. */ ++count; sleep_between_retrievals (count); /* Get the current time string. */ tms = time_str (NULL); /* Print fetch message, if opt.verbose. */ if (opt.verbose) { char *hurl = str_url (u->proxy ? u->proxy : u, 1); char tmp[15]; strcpy (tmp, " "); if (count > 1) sprintf (tmp, _("(try:%2d)"), count); logprintf (LOG_VERBOSE, "--%s-- %s\n %s => `%s'\n", tms, hurl, tmp, locf); #ifdef WINDOWS ws_changetitle (hurl, 1); #endif xfree (hurl); } /* Default document type is empty. However, if spider mode is on or time-stamping is employed, HEAD_ONLY commands is encoded within *dt. */ if (opt.spider || (use_ts && !got_head)) *dt |= HEAD_ONLY; else *dt &= ~HEAD_ONLY; /* Assume no restarting. */ hstat.restval = 0L; /* Decide whether or not to restart. */ if (((count > 1 && (*dt & ACCEPTRANGES)) || opt.always_rest) && file_exists_p (locf)) if (stat (locf, &st) == 0 && S_ISREG (st.st_mode)) hstat.restval = st.st_size; /* Decide whether to send the no-cache directive. */ if (u->proxy && (count > 1 || (opt.proxy_cache == 0))) *dt |= SEND_NOCACHE; else *dt &= ~SEND_NOCACHE; /* Try fetching the document, or at least its head. :-) */ err = gethttp (u, &hstat, dt); /* It's unfortunate that wget determines the local filename before finding out the Content-Type of the file. Barring a major restructuring of the code, we need to re-set locf here, since gethttp() may have xrealloc()d u->local to tack on ".html". */ if (!opt.output_document) locf = u->local; else locf = opt.output_document; /* In `-c' is used, check whether the file we're writing to exists before we've done anything. If so, we'll refuse to truncate it if the server doesn't support continued downloads. */ if (opt.always_rest) hstat.no_truncate = file_exists_p (locf); /* Time? */ tms = time_str (NULL); /* Get the new location (with or without the redirection). */ if (hstat.newloc) *newloc = xstrdup (hstat.newloc); switch (err) { case HERR: case HEOF: case CONSOCKERR: case CONCLOSED: case CONERROR: case READERR: case WRITEFAILED: case RANGEERR: /* Non-fatal errors continue executing the loop, which will bring them to "while" statement at the end, to judge whether the number of tries was exceeded. */ FREEHSTAT (hstat); printwhat (count, opt.ntry); continue; break; case HOSTERR: case CONREFUSED: case PROXERR: case AUTHFAILED: case SSLERRCTXCREATE: case CONTNOTSUPPORTED: /* Fatal errors just return from the function. */ FREEHSTAT (hstat); xfree (filename_plus_orig_suffix); /* must precede every return! */ return err; break; case FWRITEERR: case FOPENERR: /* Another fatal error. */ logputs (LOG_VERBOSE, "\n"); logprintf (LOG_NOTQUIET, _("Cannot write to `%s' (%s).\n"), u->local, strerror (errno)); FREEHSTAT (hstat); return err; break; case CONSSLERR: /* Another fatal error. */ logputs (LOG_VERBOSE, "\n"); logprintf (LOG_NOTQUIET, _("Unable to establish SSL connection.\n")); FREEHSTAT (hstat); xfree (filename_plus_orig_suffix); /* must precede every return! */ return err; break; case NEWLOCATION: /* Return the new location to the caller. */ if (!hstat.newloc) { logprintf (LOG_NOTQUIET, _("ERROR: Redirection (%d) without location.\n"), hstat.statcode); xfree (filename_plus_orig_suffix); /* must precede every return! */ return WRONGCODE; } FREEHSTAT (hstat); xfree (filename_plus_orig_suffix); /* must precede every return! */ return NEWLOCATION; break; case RETRFINISHED: /* Deal with you later. */ break; default: /* All possibilities should have been exhausted. */ abort (); } if (!(*dt & RETROKF)) { if (!opt.verbose) { /* #### Ugly ugly ugly! */ char *hurl = str_url (u->proxy ? u->proxy : u, 1); logprintf (LOG_NONVERBOSE, "%s:\n", hurl); xfree (hurl); } logprintf (LOG_NOTQUIET, _("%s ERROR %d: %s.\n"), tms, hstat.statcode, hstat.error); logputs (LOG_VERBOSE, "\n"); FREEHSTAT (hstat); xfree (filename_plus_orig_suffix); /* must precede every return! */ return WRONGCODE; } /* Did we get the time-stamp? */ if (!got_head) { if (opt.timestamping && !hstat.remote_time) { logputs (LOG_NOTQUIET, _("\ Last-modified header missing -- time-stamps turned off.\n")); } else if (hstat.remote_time) { /* Convert the date-string into struct tm. */ tmr = http_atotm (hstat.remote_time); if (tmr == (time_t) (-1)) logputs (LOG_VERBOSE, _("\ Last-modified header invalid -- time-stamp ignored.\n")); } } /* The time-stamping section. */ if (use_ts) { got_head = 1; *dt &= ~HEAD_ONLY; use_ts = 0; /* no more time-stamping */ count = 0; /* the retrieve count for HEAD is reset */ if (hstat.remote_time && tmr != (time_t) (-1)) { /* Now time-stamping can be used validly. Time-stamping means that if the sizes of the local and remote file match, and local file is newer than the remote file, it will not be retrieved. Otherwise, the normal download procedure is resumed. */ if (tml >= tmr && (hstat.contlen == -1 || local_size == hstat.contlen)) { logprintf (LOG_VERBOSE, _("\ Server file no newer than local file `%s' -- not retrieving.\n\n"), local_filename); FREEHSTAT (hstat); xfree (filename_plus_orig_suffix); /*must precede every return!*/ return RETROK; } else if (tml >= tmr) logprintf (LOG_VERBOSE, _("\ The sizes do not match (local %ld) -- retrieving.\n"), local_size); else logputs (LOG_VERBOSE, _("Remote file is newer, retrieving.\n")); } FREEHSTAT (hstat); continue; } if ((tmr != (time_t) (-1)) && !opt.spider && ((hstat.len == hstat.contlen) || ((hstat.res == 0) && ((hstat.contlen == -1) || (hstat.len >= hstat.contlen && !opt.kill_longer))))) { /* #### This code repeats in http.c and ftp.c. Move it to a function! */ const char *fl = NULL; if (opt.output_document) { if (opt.od_known_regular) fl = opt.output_document; } else fl = u->local; if (fl) touch (fl, tmr); } /* End of time-stamping section. */ if (opt.spider) { logprintf (LOG_NOTQUIET, "%d %s\n\n", hstat.statcode, hstat.error); xfree (filename_plus_orig_suffix); /* must precede every return! */ return RETROK; } /* It is now safe to free the remainder of hstat, since the strings within it will no longer be used. */ FREEHSTAT (hstat); tmrate = rate (hstat.len - hstat.restval, hstat.dltime, 0); if (hstat.len == hstat.contlen) { if (*dt & RETROKF) { logprintf (LOG_VERBOSE, _("%s (%s) - `%s' saved [%ld/%ld]\n\n"), tms, tmrate, locf, hstat.len, hstat.contlen); logprintf (LOG_NONVERBOSE, "%s URL:%s [%ld/%ld] -> \"%s\" [%d]\n", tms, u->url, hstat.len, hstat.contlen, locf, count); } ++opt.numurls; downloaded_increase (hstat.len); /* Remember that we downloaded the file for later ".orig" code. */ if (*dt & ADDED_HTML_EXTENSION) downloaded_file(FILE_DOWNLOADED_AND_HTML_EXTENSION_ADDED, locf); else downloaded_file(FILE_DOWNLOADED_NORMALLY, locf); xfree(filename_plus_orig_suffix); /* must precede every return! */ return RETROK; } else if (hstat.res == 0) /* No read error */ { if (hstat.contlen == -1) /* We don't know how much we were supposed to get, so assume we succeeded. */ { if (*dt & RETROKF) { logprintf (LOG_VERBOSE, _("%s (%s) - `%s' saved [%ld]\n\n"), tms, tmrate, locf, hstat.len); logprintf (LOG_NONVERBOSE, "%s URL:%s [%ld] -> \"%s\" [%d]\n", tms, u->url, hstat.len, locf, count); } ++opt.numurls; downloaded_increase (hstat.len); /* Remember that we downloaded the file for later ".orig" code. */ if (*dt & ADDED_HTML_EXTENSION) downloaded_file(FILE_DOWNLOADED_AND_HTML_EXTENSION_ADDED, locf); else downloaded_file(FILE_DOWNLOADED_NORMALLY, locf); xfree (filename_plus_orig_suffix); /* must precede every return! */ return RETROK; } else if (hstat.len < hstat.contlen) /* meaning we lost the connection too soon */ { logprintf (LOG_VERBOSE, _("%s (%s) - Connection closed at byte %ld. "), tms, tmrate, hstat.len); printwhat (count, opt.ntry); continue; } else if (!opt.kill_longer) /* meaning we got more than expected */ { logprintf (LOG_VERBOSE, _("%s (%s) - `%s' saved [%ld/%ld])\n\n"), tms, tmrate, locf, hstat.len, hstat.contlen); logprintf (LOG_NONVERBOSE, "%s URL:%s [%ld/%ld] -> \"%s\" [%d]\n", tms, u->url, hstat.len, hstat.contlen, locf, count); ++opt.numurls; downloaded_increase (hstat.len); /* Remember that we downloaded the file for later ".orig" code. */ if (*dt & ADDED_HTML_EXTENSION) downloaded_file(FILE_DOWNLOADED_AND_HTML_EXTENSION_ADDED, locf); else downloaded_file(FILE_DOWNLOADED_NORMALLY, locf); xfree (filename_plus_orig_suffix); /* must precede every return! */ return RETROK; } else /* the same, but not accepted */ { logprintf (LOG_VERBOSE, _("%s (%s) - Connection closed at byte %ld/%ld. "), tms, tmrate, hstat.len, hstat.contlen); printwhat (count, opt.ntry); continue; } } else /* now hstat.res can only be -1 */ { if (hstat.contlen == -1) { logprintf (LOG_VERBOSE, _("%s (%s) - Read error at byte %ld (%s)."), tms, tmrate, hstat.len, strerror (errno)); printwhat (count, opt.ntry); continue; } else /* hstat.res == -1 and contlen is given */ { logprintf (LOG_VERBOSE, _("%s (%s) - Read error at byte %ld/%ld (%s). "), tms, tmrate, hstat.len, hstat.contlen, strerror (errno)); printwhat (count, opt.ntry); continue; } } /* not reached */ break; } while (!opt.ntry || (count < opt.ntry)); xfree (filename_plus_orig_suffix); /* must precede every return! */ return TRYLIMEXC; } /* Converts struct tm to time_t, assuming the data in tm is UTC rather than local timezone (mktime assumes the latter). Contributed by Roger Beeman , with the help of Mark Baushke and the rest of the Gurus at CISCO. */ static time_t mktime_from_utc (struct tm *t) { time_t tl, tb; tl = mktime (t); if (tl == -1) return -1; tb = mktime (gmtime (&tl)); return (tl <= tb ? (tl + (tl - tb)) : (tl - (tb - tl))); } /* Check whether the result of strptime() indicates success. strptime() returns the pointer to how far it got to in the string. The processing has been successful if the string is at `GMT' or `+X', or at the end of the string. In extended regexp parlance, the function returns 1 if P matches "^ *(GMT|[+-][0-9]|$)", 0 otherwise. P being NULL (a valid result of strptime()) is considered a failure and 0 is returned. */ static int check_end (const char *p) { if (!p) return 0; while (ISSPACE (*p)) ++p; if (!*p || (p[0] == 'G' && p[1] == 'M' && p[2] == 'T') || ((p[0] == '+' || p[0] == '-') && ISDIGIT (p[1]))) return 1; else return 0; } /* Convert TIME_STRING time to time_t. TIME_STRING can be in any of the three formats RFC2068 allows the HTTP servers to emit -- RFC1123-date, RFC850-date or asctime-date. Timezones are ignored, and should be GMT. We use strptime() to recognize various dates, which makes it a little bit slacker than the RFC1123/RFC850/asctime (e.g. it always allows shortened dates and months, one-digit days, etc.). It also allows more than one space anywhere where the specs require one SP. The routine should probably be even more forgiving (as recommended by RFC2068), but I do not have the time to write one. Return the computed time_t representation, or -1 if all the schemes fail. Needless to say, what we *really* need here is something like Marcus Hennecke's atotm(), which is forgiving, fast, to-the-point, and does not use strptime(). atotm() is to be found in the sources of `phttpd', a little-known HTTP server written by Peter Erikson. */ static time_t http_atotm (char *time_string) { struct tm t; /* Roger Beeman says: "This function dynamically allocates struct tm t, but does no initialization. The only field that actually needs initialization is tm_isdst, since the others will be set by strptime. Since strptime does not set tm_isdst, it will return the data structure with whatever data was in tm_isdst to begin with. For those of us in timezones where DST can occur, there can be a one hour shift depending on the previous contents of the data area where the data structure is allocated." */ t.tm_isdst = -1; /* Note that under foreign locales Solaris strptime() fails to recognize English dates, which renders this function useless. I assume that other non-GNU strptime's are plagued by the same disease. We solve this by setting only LC_MESSAGES in i18n_initialize(), instead of LC_ALL. Another solution could be to temporarily set locale to C, invoke strptime(), and restore it back. This is slow and dirty, however, and locale support other than LC_MESSAGES can mess other things, so I rather chose to stick with just setting LC_MESSAGES. Also note that none of this is necessary under GNU strptime(), because it recognizes both international and local dates. */ /* NOTE: We don't use `%n' for white space, as OSF's strptime uses it to eat all white space up to (and including) a newline, and the function fails if there is no newline (!). Let's hope all strptime() implementations use ` ' to skip *all* whitespace instead of just one (it works that way on all the systems I've tested it on). */ /* RFC1123: Thu, 29 Jan 1998 22:12:57 */ if (check_end (strptime (time_string, "%a, %d %b %Y %T", &t))) return mktime_from_utc (&t); /* RFC850: Thu, 29-Jan-98 22:12:57 */ if (check_end (strptime (time_string, "%a, %d-%b-%y %T", &t))) return mktime_from_utc (&t); /* asctime: Thu Jan 29 22:12:57 1998 */ if (check_end (strptime (time_string, "%a %b %d %T %Y", &t))) return mktime_from_utc (&t); /* Failure. */ return -1; } /* Authorization support: We support two authorization schemes: * `Basic' scheme, consisting of base64-ing USER:PASSWORD string; * `Digest' scheme, added by Junio Hamano , consisting of answering to the server's challenge with the proper MD5 digests. */ /* How many bytes it will take to store LEN bytes in base64. */ #define BASE64_LENGTH(len) (4 * (((len) + 2) / 3)) /* Encode the string S of length LENGTH to base64 format and place it to STORE. STORE will be 0-terminated, and must point to a writable buffer of at least 1+BASE64_LENGTH(length) bytes. */ static void base64_encode (const char *s, char *store, int length) { /* Conversion table. */ static char tbl[64] = { 'A','B','C','D','E','F','G','H', 'I','J','K','L','M','N','O','P', 'Q','R','S','T','U','V','W','X', 'Y','Z','a','b','c','d','e','f', 'g','h','i','j','k','l','m','n', 'o','p','q','r','s','t','u','v', 'w','x','y','z','0','1','2','3', '4','5','6','7','8','9','+','/' }; int i; unsigned char *p = (unsigned char *)store; /* Transform the 3x8 bits to 4x6 bits, as required by base64. */ for (i = 0; i < length; i += 3) { *p++ = tbl[s[0] >> 2]; *p++ = tbl[((s[0] & 3) << 4) + (s[1] >> 4)]; *p++ = tbl[((s[1] & 0xf) << 2) + (s[2] >> 6)]; *p++ = tbl[s[2] & 0x3f]; s += 3; } /* Pad the result if necessary... */ if (i == length + 1) *(p - 1) = '='; else if (i == length + 2) *(p - 1) = *(p - 2) = '='; /* ...and zero-terminate it. */ *p = '\0'; } /* Create the authentication header contents for the `Basic' scheme. This is done by encoding the string `USER:PASS' in base64 and prepending `HEADER: Basic ' to it. */ static char * basic_authentication_encode (const char *user, const char *passwd, const char *header) { char *t1, *t2, *res; int len1 = strlen (user) + 1 + strlen (passwd); int len2 = BASE64_LENGTH (len1); t1 = (char *)alloca (len1 + 1); sprintf (t1, "%s:%s", user, passwd); t2 = (char *)alloca (1 + len2); base64_encode (t1, t2, len1); res = (char *)xmalloc (len2 + 11 + strlen (header)); sprintf (res, "%s: Basic %s\r\n", header, t2); return res; } #ifdef USE_DIGEST /* Parse HTTP `WWW-Authenticate:' header. AU points to the beginning of a field in such a header. If the field is the one specified by ATTR_NAME ("realm", "opaque", and "nonce" are used by the current digest authorization code), extract its value in the (char*) variable pointed by RET. Returns negative on a malformed header, or number of bytes that have been parsed by this call. */ static int extract_header_attr (const char *au, const char *attr_name, char **ret) { const char *cp, *ep; ep = cp = au; if (strncmp (cp, attr_name, strlen (attr_name)) == 0) { cp += strlen (attr_name); if (!*cp) return -1; cp += skip_lws (cp); if (*cp != '=') return -1; if (!*++cp) return -1; cp += skip_lws (cp); if (*cp != '\"') return -1; if (!*++cp) return -1; for (ep = cp; *ep && *ep != '\"'; ep++) ; if (!*ep) return -1; FREE_MAYBE (*ret); *ret = strdupdelim (cp, ep); return ep - au + 1; } else return 0; } /* Response value needs to be in lowercase, so we cannot use HEXD2ASC from url.h. See RFC 2069 2.1.2 for the syntax of response-digest. */ #define HEXD2asc(x) (((x) < 10) ? ((x) + '0') : ((x) - 10 + 'a')) /* Dump the hexadecimal representation of HASH to BUF. HASH should be an array of 16 bytes containing the hash keys, and BUF should be a buffer of 33 writable characters (32 for hex digits plus one for zero termination). */ static void dump_hash (unsigned char *buf, const unsigned char *hash) { int i; for (i = 0; i < MD5_HASHLEN; i++, hash++) { *buf++ = HEXD2asc (*hash >> 4); *buf++ = HEXD2asc (*hash & 0xf); } *buf = '\0'; } /* Take the line apart to find the challenge, and compose a digest authorization header. See RFC2069 section 2.1.2. */ char * digest_authentication_encode (const char *au, const char *user, const char *passwd, const char *method, const char *path) { static char *realm, *opaque, *nonce; static struct { const char *name; char **variable; } options[] = { { "realm", &realm }, { "opaque", &opaque }, { "nonce", &nonce } }; char *res; realm = opaque = nonce = NULL; au += 6; /* skip over `Digest' */ while (*au) { int i; au += skip_lws (au); for (i = 0; i < ARRAY_SIZE (options); i++) { int skip = extract_header_attr (au, options[i].name, options[i].variable); if (skip < 0) { FREE_MAYBE (realm); FREE_MAYBE (opaque); FREE_MAYBE (nonce); return NULL; } else if (skip) { au += skip; break; } } if (i == ARRAY_SIZE (options)) { while (*au && *au != '=') au++; if (*au && *++au) { au += skip_lws (au); if (*au == '\"') { au++; while (*au && *au != '\"') au++; if (*au) au++; } } } while (*au && *au != ',') au++; if (*au) au++; } if (!realm || !nonce || !user || !passwd || !path || !method) { FREE_MAYBE (realm); FREE_MAYBE (opaque); FREE_MAYBE (nonce); return NULL; } /* Calculate the digest value. */ { struct md5_ctx ctx; unsigned char hash[MD5_HASHLEN]; unsigned char a1buf[MD5_HASHLEN * 2 + 1], a2buf[MD5_HASHLEN * 2 + 1]; unsigned char response_digest[MD5_HASHLEN * 2 + 1]; /* A1BUF = H(user ":" realm ":" password) */ md5_init_ctx (&ctx); md5_process_bytes (user, strlen (user), &ctx); md5_process_bytes (":", 1, &ctx); md5_process_bytes (realm, strlen (realm), &ctx); md5_process_bytes (":", 1, &ctx); md5_process_bytes (passwd, strlen (passwd), &ctx); md5_finish_ctx (&ctx, hash); dump_hash (a1buf, hash); /* A2BUF = H(method ":" path) */ md5_init_ctx (&ctx); md5_process_bytes (method, strlen (method), &ctx); md5_process_bytes (":", 1, &ctx); md5_process_bytes (path, strlen (path), &ctx); md5_finish_ctx (&ctx, hash); dump_hash (a2buf, hash); /* RESPONSE_DIGEST = H(A1BUF ":" nonce ":" A2BUF) */ md5_init_ctx (&ctx); md5_process_bytes (a1buf, MD5_HASHLEN * 2, &ctx); md5_process_bytes (":", 1, &ctx); md5_process_bytes (nonce, strlen (nonce), &ctx); md5_process_bytes (":", 1, &ctx); md5_process_bytes (a2buf, MD5_HASHLEN * 2, &ctx); md5_finish_ctx (&ctx, hash); dump_hash (response_digest, hash); res = (char*) xmalloc (strlen (user) + strlen (user) + strlen (realm) + strlen (nonce) + strlen (path) + 2 * MD5_HASHLEN /*strlen (response_digest)*/ + (opaque ? strlen (opaque) : 0) + 128); sprintf (res, "Authorization: Digest \ username=\"%s\", realm=\"%s\", nonce=\"%s\", uri=\"%s\", response=\"%s\"", user, realm, nonce, path, response_digest); if (opaque) { char *p = res + strlen (res); strcat (p, ", opaque=\""); strcat (p, opaque); strcat (p, "\""); } strcat (res, "\r\n"); } return res; } #endif /* USE_DIGEST */ #define BEGINS_WITH(line, string_constant) \ (!strncasecmp (line, string_constant, sizeof (string_constant) - 1) \ && (ISSPACE (line[sizeof (string_constant) - 1]) \ || !line[sizeof (string_constant) - 1])) static int known_authentication_scheme_p (const char *au) { return BEGINS_WITH (au, "Basic") || BEGINS_WITH (au, "Digest") || BEGINS_WITH (au, "NTLM"); } #undef BEGINS_WITH /* Create the HTTP authorization request header. When the `WWW-Authenticate' response header is seen, according to the authorization scheme specified in that header (`Basic' and `Digest' are supported by the current implementation), produce an appropriate HTTP authorization request header. */ static char * create_authorization_line (const char *au, const char *user, const char *passwd, const char *method, const char *path) { char *wwwauth = NULL; if (!strncasecmp (au, "Basic", 5)) wwwauth = basic_authentication_encode (user, passwd, "Authorization"); if (!strncasecmp (au, "NTLM", 4)) wwwauth = basic_authentication_encode (user, passwd, "Authorization"); #ifdef USE_DIGEST else if (!strncasecmp (au, "Digest", 6)) wwwauth = digest_authentication_encode (au, user, passwd, method, path); #endif /* USE_DIGEST */ return wwwauth; }