1
0
mirror of https://github.com/moparisthebest/wget synced 2024-07-03 16:38:41 -04:00

[svn] Removed libtool and switched to config.rpath to perform configuration-time detection of (non-system) libraries.

This commit is contained in:
mtortonesi 2005-06-23 19:10:18 -07:00
parent 48acf01149
commit 6e0e330f5c
12 changed files with 1412 additions and 12703 deletions

View File

@ -57,7 +57,7 @@ CC = @CC@
CFLAGS = @CFLAGS@ CFLAGS = @CFLAGS@
CPPFLAGS = @CPPFLAGS@ CPPFLAGS = @CPPFLAGS@
DEFS = @DEFS@ -DSYSTEM_WGETRC=\"$(sysconfdir)/wgetrc\" -DLOCALEDIR=\"$(localedir)\" DEFS = @DEFS@ -DSYSTEM_WGETRC=\"$(sysconfdir)/wgetrc\" -DLOCALEDIR=\"$(localedir)\"
LIBS = @LIBS@ LIBS = @LIBS@ @LIBSSL@
LDFLAGS = @LDFLAGS@ LDFLAGS = @LDFLAGS@
# #
@ -66,7 +66,6 @@ LDFLAGS = @LDFLAGS@
# #
DISTNAME = wget-@VERSION@ DISTNAME = wget-@VERSION@
LIBTOOL_DEPS = @LIBTOOL_DEPS@
RM = rm -f RM = rm -f
# These are used for maintenance only, so they are safe without # These are used for maintenance only, so they are safe without
@ -85,7 +84,7 @@ infodir='$(infodir)' mandir='$(mandir)' manext='$(manext)'
SUBDIRS = src doc po util windows SUBDIRS = src doc po util windows
# default target # default target
all: libtool src/config.h Makefile $(SUBDIRS) all: src/config.h Makefile $(SUBDIRS)
check: all check: all
@ -108,10 +107,6 @@ install.info uninstall.info install.man uninstall.man install.wgetrc:
install.mo: install.mo:
cd po && $(MAKE) $(MAKEDEFS) $@ cd po && $(MAKE) $(MAKEDEFS) $@
# Regenerate libtool if ltconfig and/or ltmain are updated
libtool: $(LIBTOOL_DEPS)
$(SHELL) ./config.status --recheck
# Create configure.bat from configure.bat.in by DOS-ifying the lines. # Create configure.bat from configure.bat.in by DOS-ifying the lines.
# This is invoked by `make dist' and deleted by `make realclean' (not # This is invoked by `make dist' and deleted by `make realclean' (not
# `make distclean' because we want to preserve it for distribution). # `make distclean' because we want to preserve it for distribution).

View File

@ -32,6 +32,7 @@
# Autoconf is not installed (or, more precisely, not found in the # Autoconf is not installed (or, more precisely, not found in the
# PATH). # PATH).
cat m4/*.m4 > aclocal.m4
autoheader autoheader
autoconf autoconf

571
config.rpath Executable file
View File

@ -0,0 +1,571 @@
#! /bin/sh
# Output a system dependent set of variables, describing how to set the
# run time search path of shared libraries in an executable.
#
# Copyright 1996-2005 Free Software Foundation, Inc.
# Taken from GNU libtool, 2001
# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
#
# This file is free software; the Free Software Foundation gives
# unlimited permission to copy and/or distribute it, with or without
# modifications, as long as this notice is preserved.
#
# The first argument passed to this file is the canonical host specification,
# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
# or
# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
# The environment variables CC, GCC, LDFLAGS, LD, with_gnu_ld
# should be set by the caller.
#
# The set of defined variables is at the end of this script.
# Known limitations:
# - On IRIX 6.5 with CC="cc", the run time search patch must not be longer
# than 256 bytes, otherwise the compiler driver will dump core. The only
# known workaround is to choose shorter directory names for the build
# directory and/or the installation directory.
# All known linkers require a `.a' archive for static linking (except M$VC,
# which needs '.lib').
libext=a
shrext=.so
host="$1"
host_cpu=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
host_vendor=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
host_os=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
cc_basename=`echo "$CC" | sed -e 's%^.*/%%'`
# Code taken from libtool.m4's AC_LIBTOOL_PROG_COMPILER_PIC.
wl=
if test "$GCC" = yes; then
wl='-Wl,'
else
case "$host_os" in
aix*)
wl='-Wl,'
;;
darwin*)
case "$cc_basename" in
xlc*)
wl='-Wl,'
;;
esac
;;
mingw* | pw32* | os2*)
;;
hpux9* | hpux10* | hpux11*)
wl='-Wl,'
;;
irix5* | irix6* | nonstopux*)
wl='-Wl,'
;;
newsos6)
;;
linux*)
case $cc_basename in
icc* | ecc*)
wl='-Wl,'
;;
pgcc | pgf77 | pgf90)
wl='-Wl,'
;;
ccc*)
wl='-Wl,'
;;
como)
wl='-lopt='
;;
esac
;;
osf3* | osf4* | osf5*)
wl='-Wl,'
;;
sco3.2v5*)
;;
solaris*)
wl='-Wl,'
;;
sunos4*)
wl='-Qoption ld '
;;
sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
wl='-Wl,'
;;
sysv4*MP*)
;;
unicos*)
wl='-Wl,'
;;
uts4*)
;;
esac
fi
# Code taken from libtool.m4's AC_LIBTOOL_PROG_LD_SHLIBS.
hardcode_libdir_flag_spec=
hardcode_libdir_separator=
hardcode_direct=no
hardcode_minus_L=no
case "$host_os" in
cygwin* | mingw* | pw32*)
# FIXME: the MSVC++ port hasn't been tested in a loooong time
# When not using gcc, we currently assume that we are using
# Microsoft Visual C++.
if test "$GCC" != yes; then
with_gnu_ld=no
fi
;;
openbsd*)
with_gnu_ld=no
;;
esac
ld_shlibs=yes
if test "$with_gnu_ld" = yes; then
case "$host_os" in
aix3* | aix4* | aix5*)
# On AIX/PPC, the GNU linker is very broken
if test "$host_cpu" != ia64; then
ld_shlibs=no
fi
;;
amigaos*)
hardcode_libdir_flag_spec='-L$libdir'
hardcode_minus_L=yes
# Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
# that the semantics of dynamic libraries on AmigaOS, at least up
# to version 4, is to share data among multiple programs linked
# with the same dynamic library. Since this doesn't match the
# behavior of shared libraries on other platforms, we cannot use
# them.
ld_shlibs=no
;;
beos*)
if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
:
else
ld_shlibs=no
fi
;;
cygwin* | mingw* | pw32*)
# hardcode_libdir_flag_spec is actually meaningless, as there is
# no search path for DLLs.
hardcode_libdir_flag_spec='-L$libdir'
if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
:
else
ld_shlibs=no
fi
;;
netbsd*)
;;
solaris* | sysv5*)
if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
ld_shlibs=no
elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
:
else
ld_shlibs=no
fi
;;
sunos4*)
hardcode_direct=yes
;;
linux*)
if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
:
else
ld_shlibs=no
fi
;;
*)
if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
:
else
ld_shlibs=no
fi
;;
esac
if test "$ld_shlibs" = yes; then
# Unlike libtool, we use -rpath here, not --rpath, since the documented
# option of GNU ld is called -rpath, not --rpath.
hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
fi
else
case "$host_os" in
aix3*)
# Note: this linker hardcodes the directories in LIBPATH if there
# are no directories specified by -L.
hardcode_minus_L=yes
if test "$GCC" = yes; then
# Neither direct hardcoding nor static linking is supported with a
# broken collect2.
hardcode_direct=unsupported
fi
;;
aix4* | aix5*)
if test "$host_cpu" = ia64; then
# On IA64, the linker does run time linking by default, so we don't
# have to do anything special.
aix_use_runtimelinking=no
else
aix_use_runtimelinking=no
# Test if we are trying to use run time linking or normal
# AIX style linking. If -brtl is somewhere in LDFLAGS, we
# need to do runtime linking.
case $host_os in aix4.[23]|aix4.[23].*|aix5*)
for ld_flag in $LDFLAGS; do
if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
aix_use_runtimelinking=yes
break
fi
done
esac
fi
hardcode_direct=yes
hardcode_libdir_separator=':'
if test "$GCC" = yes; then
case $host_os in aix4.[012]|aix4.[012].*)
collect2name=`${CC} -print-prog-name=collect2`
if test -f "$collect2name" && \
strings "$collect2name" | grep resolve_lib_name >/dev/null
then
# We have reworked collect2
hardcode_direct=yes
else
# We have old collect2
hardcode_direct=unsupported
hardcode_minus_L=yes
hardcode_libdir_flag_spec='-L$libdir'
hardcode_libdir_separator=
fi
esac
fi
# Begin _LT_AC_SYS_LIBPATH_AIX.
echo 'int main () { return 0; }' > conftest.c
${CC} ${LDFLAGS} conftest.c -o conftest
aix_libpath=`dump -H conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
}'`
if test -z "$aix_libpath"; then
aix_libpath=`dump -HX64 conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
}'`
fi
if test -z "$aix_libpath"; then
aix_libpath="/usr/lib:/lib"
fi
rm -f conftest.c conftest
# End _LT_AC_SYS_LIBPATH_AIX.
if test "$aix_use_runtimelinking" = yes; then
hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
else
if test "$host_cpu" = ia64; then
hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
else
hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
fi
fi
;;
amigaos*)
hardcode_libdir_flag_spec='-L$libdir'
hardcode_minus_L=yes
# see comment about different semantics on the GNU ld section
ld_shlibs=no
;;
bsdi[45]*)
;;
cygwin* | mingw* | pw32*)
# When not using gcc, we currently assume that we are using
# Microsoft Visual C++.
# hardcode_libdir_flag_spec is actually meaningless, as there is
# no search path for DLLs.
hardcode_libdir_flag_spec=' '
libext=lib
;;
darwin* | rhapsody*)
hardcode_direct=no
if test "$GCC" = yes ; then
:
else
case "$cc_basename" in
xlc*)
;;
*)
ld_shlibs=no
;;
esac
fi
;;
dgux*)
hardcode_libdir_flag_spec='-L$libdir'
;;
freebsd1*)
ld_shlibs=no
;;
freebsd2.2*)
hardcode_libdir_flag_spec='-R$libdir'
hardcode_direct=yes
;;
freebsd2*)
hardcode_direct=yes
hardcode_minus_L=yes
;;
freebsd* | kfreebsd*-gnu | dragonfly*)
hardcode_libdir_flag_spec='-R$libdir'
hardcode_direct=yes
;;
hpux9*)
hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
hardcode_libdir_separator=:
hardcode_direct=yes
# hardcode_minus_L: Not really in the search PATH,
# but as the default location of the library.
hardcode_minus_L=yes
;;
hpux10* | hpux11*)
if test "$with_gnu_ld" = no; then
case "$host_cpu" in
hppa*64*)
hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
hardcode_libdir_separator=:
hardcode_direct=no
;;
ia64*)
hardcode_libdir_flag_spec='-L$libdir'
hardcode_direct=no
# hardcode_minus_L: Not really in the search PATH,
# but as the default location of the library.
hardcode_minus_L=yes
;;
*)
hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
hardcode_libdir_separator=:
hardcode_direct=yes
# hardcode_minus_L: Not really in the search PATH,
# but as the default location of the library.
hardcode_minus_L=yes
;;
esac
fi
;;
irix5* | irix6* | nonstopux*)
hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
hardcode_libdir_separator=:
;;
netbsd*)
hardcode_libdir_flag_spec='-R$libdir'
hardcode_direct=yes
;;
newsos6)
hardcode_direct=yes
hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
hardcode_libdir_separator=:
;;
openbsd*)
hardcode_direct=yes
if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
else
case "$host_os" in
openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
hardcode_libdir_flag_spec='-R$libdir'
;;
*)
hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
;;
esac
fi
;;
os2*)
hardcode_libdir_flag_spec='-L$libdir'
hardcode_minus_L=yes
;;
osf3*)
hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
hardcode_libdir_separator=:
;;
osf4* | osf5*)
if test "$GCC" = yes; then
hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
else
# Both cc and cxx compiler support -rpath directly
hardcode_libdir_flag_spec='-rpath $libdir'
fi
hardcode_libdir_separator=:
;;
sco3.2v5*)
;;
solaris*)
hardcode_libdir_flag_spec='-R$libdir'
;;
sunos4*)
hardcode_libdir_flag_spec='-L$libdir'
hardcode_direct=yes
hardcode_minus_L=yes
;;
sysv4)
case $host_vendor in
sni)
hardcode_direct=yes # is this really true???
;;
siemens)
hardcode_direct=no
;;
motorola)
hardcode_direct=no #Motorola manual says yes, but my tests say they lie
;;
esac
;;
sysv4.3*)
;;
sysv4*MP*)
if test -d /usr/nec; then
ld_shlibs=yes
fi
;;
sysv4.2uw2*)
hardcode_direct=yes
hardcode_minus_L=no
;;
sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[78]* | unixware7*)
;;
sysv5*)
hardcode_libdir_flag_spec=
;;
uts4*)
hardcode_libdir_flag_spec='-L$libdir'
;;
*)
ld_shlibs=no
;;
esac
fi
# Check dynamic linker characteristics
# Code taken from libtool.m4's AC_LIBTOOL_SYS_DYNAMIC_LINKER.
libname_spec='lib$name'
case "$host_os" in
aix3*)
;;
aix4* | aix5*)
;;
amigaos*)
;;
beos*)
;;
bsdi[45]*)
;;
cygwin* | mingw* | pw32*)
shrext=.dll
;;
darwin* | rhapsody*)
shrext=.dylib
;;
dgux*)
;;
freebsd1*)
;;
kfreebsd*-gnu)
;;
freebsd*)
;;
gnu*)
;;
hpux9* | hpux10* | hpux11*)
case "$host_cpu" in
ia64*)
shrext=.so
;;
hppa*64*)
shrext=.sl
;;
*)
shrext=.sl
;;
esac
;;
irix5* | irix6* | nonstopux*)
case "$host_os" in
irix5* | nonstopux*)
libsuff= shlibsuff=
;;
*)
case $LD in
*-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= ;;
*-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 ;;
*-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 ;;
*) libsuff= shlibsuff= ;;
esac
;;
esac
;;
linux*oldld* | linux*aout* | linux*coff*)
;;
linux*)
;;
knetbsd*-gnu)
;;
netbsd*)
;;
newsos6)
;;
nto-qnx*)
;;
openbsd*)
;;
os2*)
libname_spec='$name'
shrext=.dll
;;
osf3* | osf4* | osf5*)
;;
sco3.2v5*)
;;
solaris*)
;;
sunos4*)
;;
sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
;;
sysv4*MP*)
;;
uts4*)
;;
esac
sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
escaped_wl=`echo "X$wl" | sed -e 's/^X//' -e "$sed_quote_subst"`
shlibext=`echo "$shrext" | sed -e 's,^\.,,'`
escaped_hardcode_libdir_flag_spec=`echo "X$hardcode_libdir_flag_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
LC_ALL=C sed -e 's/^\([a-zA-Z0-9_]*\)=/acl_cv_\1=/' <<EOF
# How to pass a linker flag through the compiler.
wl="$escaped_wl"
# Static library suffix (normally "a").
libext="$libext"
# Shared library suffix (normally "so").
shlibext="$shlibext"
# Flag to hardcode \$libdir into a binary during linking.
# This must work even if \$libdir does not exist.
hardcode_libdir_flag_spec="$escaped_hardcode_libdir_flag_spec"
# Whether we need a single -rpath flag with a separated argument.
hardcode_libdir_separator="$hardcode_libdir_separator"
# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
# resulting binary.
hardcode_direct="$hardcode_direct"
# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
# resulting binary.
hardcode_minus_L="$hardcode_minus_L"
EOF

View File

@ -129,12 +129,6 @@ if test -n "$auto_cflags"; then
fi fi
fi fi
dnl
dnl Configure our included libtool and make sure it's regenerated when needed
dnl
AC_PROG_LIBTOOL
AC_SUBST(LIBTOOL_DEPS)
dnl dnl
dnl In case of {cyg,gnu}win32. Should be a _target_ test. dnl In case of {cyg,gnu}win32. Should be a _target_ test.
dnl Might also be erelevant for DJGPP. dnl Might also be erelevant for DJGPP.
@ -237,94 +231,12 @@ AC_SUBST(GETOPT_OBJ)
dnl dnl
dnl Checks for libraries. dnl Checks for libraries.
dnl dnl
AC_CHECK_LIB(dl,dlopen)
AC_CHECK_LIB(dl,shl_load)
dnl $with_ssl can be one of: dnl Check for OpenSSL
dnl - empty string or "auto", meaning autodetect SSL and use it if found. AC_LIB_LINKFLAGS([crypto])
dnl - "yes", meaning link with SSL or bail out. AC_LIB_LINKFLAGS([ssl],[crypto],[
dnl - "no", meaning don't link with SSL.
dnl - anything else, meaning use that as the SSL root, and bail out
dnl if it fails.
if test x"$with_ssl" = x; then
dnl Canonicalize unspecified with-ssl setting to "auto". This
dnl implements the "auto-detect by default" feature. If you want to
dnl change this to "ignore SSL by default", change "auto" to "no".
with_ssl=auto
fi
dnl Detection of OpenSSL is much hairier than the detection of other
dnl libraries because OpenSSL can be compiled as a third-party
dnl library, which means it will not be found without additional
dnl linker magic. It would be really nice to rework this check into
dnl an AC_DEFUN so that we can reuse it for other third-party
dnl libraries.
if test x"$with_ssl" != x"no"; then
wget_force_ssl=no
if test x"$with_ssl" = x"yes"; then
wget_force_ssl=yes
fi
if test x"$with_ssl" = x"yes" || test x"$with_ssl" = x"auto"; then
dnl OpenSSL's root was not specified, so we have to guess. First
dnl try the system default location, then "/usr/local/ssl" (where
dnl OpenSSL installs by default), then "/usr/local" (traditional
dnl choice for installation root), then "/opt".
ssl_all_roots="system-default /usr/local/ssl /usr/local /opt"
else
dnl Root has been specified by the user.
ssl_all_roots=$with_ssl
wget_force_ssl=yes
fi
wget_save_CC=$CC
wget_save_LIBS=$LIBS
wget_save_LDFLAGS=$LDFLAGS
wget_save_CPPFLAGS=$CPPFLAGS
dnl Use libtool for OpenSSL tests so we can specify "-R<rpath>"
dnl without having to know how the linker handles it.
CC="$SHELL ./libtool $CC"
dnl Unfortunately, as of this writing (OpenSSL 0.9.6), the libcrypto
dnl shared library doesn't record its dependency on libdl, so we
dnl need to check for it ourselves so we won't fail to link due to a
dnl lack of -ldl. Most OSes use dlopen(), but HP-UX uses
dnl shl_load().
AC_CHECK_LIB(dl,dlopen)
AC_CHECK_LIB(dl,shl_load)
ssl_success=no
dnl Now try to find SSL libraries in each of the likely SSL roots.
for ssl_root in $ssl_all_roots
do
if test x"$ssl_root" = x"system-default"; then
dnl Try the default include and library locations.
SSL_INCLUDES=
else
dnl Try this specific root.
SSL_INCLUDES=-I$ssl_root/include
dnl It's OK to use -R directly because libtool will
dnl interpret it for us.
LDFLAGS="-L$ssl_root/lib -R$ssl_root/lib $wget_save_LDFLAGS"
fi
AC_MSG_NOTICE([looking for SSL libraries in $ssl_root])
dnl Check whether the compiler can find the include files. On
dnl some systems Gcc finds libraries in /usr/local/lib, but fails
dnl to find the includes in /usr/local/include.
ssl_found_includes=no
CPPFLAGS="$SSL_INCLUDES $wget_save_CPPFLAGS"
dnl Check for all the OpenSSL includes that Wget actually uses.
dnl This will prune both invalid installations and ancient
dnl versions of OpenSSL that we can't use.
AC_MSG_CHECKING([for includes])
AC_COMPILE_IFELSE([
#include <openssl/ssl.h> #include <openssl/ssl.h>
#include <openssl/x509.h> #include <openssl/x509.h>
#include <openssl/err.h> #include <openssl/err.h>
@ -332,92 +244,15 @@ if test x"$with_ssl" != x"no"; then
#include <openssl/des.h> #include <openssl/des.h>
#include <openssl/md4.h> #include <openssl/md4.h>
#include <openssl/md5.h> #include <openssl/md5.h>
], [ ])
AC_MSG_RESULT(found) if test x"$LIBSSL" != x
ssl_found_includes=yes then
], [ AC_MSG_NOTICE([compiling in support for SSL])
AC_MSG_RESULT([not found])
])
if test x"$ssl_found_includes" = xno; then
continue
fi
ssl_link_failure=no
dnl Make sure that the checks don't run afoul of the cache. It
dnl would be nicer to temporarily turn off the cache, but
dnl apparently Autoconf doesn't allow that.
unset ac_cv_lib_crypto_RSA_new
unset ac_cv_lib_ssl_SSL_new
dnl These checks need to be in this order, or you'll get a link
dnl failure if you use a static libcrypto.a and libssl.a rather
dnl than shared libraries.
AC_CHECK_LIB(crypto, RSA_new, , ssl_link_failure=yes)
AC_CHECK_LIB(ssl, SSL_new, , ssl_link_failure=yes)
if test x"$ssl_link_failure" = xyes; then
dnl One or both libs failed to link.
continue
fi
dnl The libraries link. But we still need to check if the program
dnl linked with those libraries under these settings with run. On
dnl some systems (Solaris), Gcc adds -L/usr/local/lib to the
dnl linking line, but fails to add -R/usr/local/lib, thus creating
dnl executables that link, but fail to run.
dnl If we are cross-compiling, just assume that working linkage
dnl implies working executable.
ssl_run_failure=no
AC_MSG_CHECKING([whether SSL libs are resolved at runtime])
AC_TRY_RUN([
int RSA_new();
int SSL_new();
main(){return 0;}
],
AC_MSG_RESULT(yes),
AC_MSG_RESULT(no); ssl_run_failure=yes,
AC_MSG_RESULT(cross)
)
if test x"$ssl_run_failure" = xno; then
ssl_success=yes
break
fi
done
if test x"$ssl_success" = xyes; then
AC_MSG_NOTICE([compiling in support for SSL in $ssl_root])
AC_DEFINE([HAVE_SSL], 1, AC_DEFINE([HAVE_SSL], 1,
[Define if SSL support should be compiled in.]) [Define if SSL support should be compiled in.])
AC_SUBST(SSL_INCLUDES)
SSL_OBJ='openssl.o' SSL_OBJ='openssl.o'
AC_SUBST(SSL_OBJ)
else
LDFLAGS=$wget_save_LDFLAGS
LIBS=$wget_save_LIBS
dnl If linking with SSL was forced rather than auto-detected, then
dnl bail out if SSL failed.
if test x"$wget_force_ssl" = x"yes"; then
AC_MSG_ERROR([failed to find OpenSSL libraries], 2)
fi
fi
dnl Restore the compiler setting.
CC=$wget_save_CC
dnl Restore the CPPFLAGS. Do this regardless of whether linking
dnl with SSL succeeded -- SSL includes will be handled using
dnl @SSL_INCLUDES@.
CPPFLAGS=$wget_save_CPPFLAGS
fi fi
AC_SUBST(SSL_OBJ)
dnl Enable NTLM if requested and if SSL is available. dnl Enable NTLM if requested and if SSL is available.
NTLM_OBJ='' NTLM_OBJ=''

6051
libtool.m4 vendored

File diff suppressed because it is too large Load Diff

6460
ltmain.sh

File diff suppressed because it is too large Load Diff

4
m4/README Normal file
View File

@ -0,0 +1,4 @@
These files are used by a program called aclocal (part of the GNU automake
package). aclocal uses these files to create aclocal.m4 which is in turn
used by autoconf to create the configure script at the the top level in
this distribution.

110
m4/lib-ld.m4 Normal file
View File

@ -0,0 +1,110 @@
# lib-ld.m4 serial 3 (gettext-0.13)
dnl Copyright (C) 1996-2003 Free Software Foundation, Inc.
dnl This file is free software; the Free Software Foundation
dnl gives unlimited permission to copy and/or distribute it,
dnl with or without modifications, as long as this notice is preserved.
dnl Subroutines of libtool.m4,
dnl with replacements s/AC_/AC_LIB/ and s/lt_cv/acl_cv/ to avoid collision
dnl with libtool.m4.
dnl From libtool-1.4. Sets the variable with_gnu_ld to yes or no.
AC_DEFUN([AC_LIB_PROG_LD_GNU],
[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], acl_cv_prog_gnu_ld,
[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
case `$LD -v 2>&1 </dev/null` in
*GNU* | *'with BFD'*)
acl_cv_prog_gnu_ld=yes ;;
*)
acl_cv_prog_gnu_ld=no ;;
esac])
with_gnu_ld=$acl_cv_prog_gnu_ld
])
dnl From libtool-1.4. Sets the variable LD.
AC_DEFUN([AC_LIB_PROG_LD],
[AC_ARG_WITH(gnu-ld,
[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]],
test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AC_CANONICAL_HOST])dnl
# Prepare PATH_SEPARATOR.
# The user is always right.
if test "${PATH_SEPARATOR+set}" != set; then
echo "#! /bin/sh" >conf$$.sh
echo "exit 0" >>conf$$.sh
chmod +x conf$$.sh
if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
PATH_SEPARATOR=';'
else
PATH_SEPARATOR=:
fi
rm -f conf$$.sh
fi
ac_prog=ld
if test "$GCC" = yes; then
# Check if gcc -print-prog-name=ld gives a path.
AC_MSG_CHECKING([for ld used by GCC])
case $host in
*-*-mingw*)
# gcc leaves a trailing carriage return which upsets mingw
ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
*)
ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
esac
case $ac_prog in
# Accept absolute paths.
[[\\/]* | [A-Za-z]:[\\/]*)]
[re_direlt='/[^/][^/]*/\.\./']
# Canonicalize the path of ld
ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
done
test -z "$LD" && LD="$ac_prog"
;;
"")
# If it fails, then pretend we aren't using GCC.
ac_prog=ld
;;
*)
# If it is relative, then search for the first ld in PATH.
with_gnu_ld=unknown
;;
esac
elif test "$with_gnu_ld" = yes; then
AC_MSG_CHECKING([for GNU ld])
else
AC_MSG_CHECKING([for non-GNU ld])
fi
AC_CACHE_VAL(acl_cv_path_LD,
[if test -z "$LD"; then
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
acl_cv_path_LD="$ac_dir/$ac_prog"
# Check to see if the program is GNU ld. I'd rather use --version,
# but apparently some GNU ld's only accept -v.
# Break only if it was the GNU/non-GNU ld that we prefer.
case `"$acl_cv_path_LD" -v 2>&1 < /dev/null` in
*GNU* | *'with BFD'*)
test "$with_gnu_ld" != no && break ;;
*)
test "$with_gnu_ld" != yes && break ;;
esac
fi
done
IFS="$ac_save_ifs"
else
acl_cv_path_LD="$LD" # Let the user override the test with a path.
fi])
LD="$acl_cv_path_LD"
if test -n "$LD"; then
AC_MSG_RESULT($LD)
else
AC_MSG_RESULT(no)
fi
test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
AC_LIB_PROG_LD_GNU
])

553
m4/lib-link.m4 Normal file
View File

@ -0,0 +1,553 @@
# lib-link.m4 serial 6 (gettext-0.14.3)
dnl Copyright (C) 2001-2005 Free Software Foundation, Inc.
dnl This file is free software; the Free Software Foundation
dnl gives unlimited permission to copy and/or distribute it,
dnl with or without modifications, as long as this notice is preserved.
dnl From Bruno Haible.
AC_PREREQ(2.50)
dnl AC_LIB_LINKFLAGS(name [, dependencies]) searches for libname and
dnl the libraries corresponding to explicit and implicit dependencies.
dnl Sets and AC_SUBSTs the LIB${NAME} and LTLIB${NAME} variables and
dnl augments the CPPFLAGS variable.
AC_DEFUN([AC_LIB_LINKFLAGS],
[
AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
AC_REQUIRE([AC_LIB_RPATH])
define([Name],[translit([$1],[./-], [___])])
define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
[ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
AC_CACHE_CHECK([how to link with lib[]$1], [ac_cv_lib[]Name[]_libs], [
AC_LIB_LINKFLAGS_BODY([$1], [$2])
ac_cv_lib[]Name[]_libs="$LIB[]NAME"
ac_cv_lib[]Name[]_ltlibs="$LTLIB[]NAME"
ac_cv_lib[]Name[]_cppflags="$INC[]NAME"
])
LIB[]NAME="$ac_cv_lib[]Name[]_libs"
LTLIB[]NAME="$ac_cv_lib[]Name[]_ltlibs"
INC[]NAME="$ac_cv_lib[]Name[]_cppflags"
AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME)
AC_SUBST([LIB]NAME)
AC_SUBST([LTLIB]NAME)
dnl Also set HAVE_LIB[]NAME so that AC_LIB_HAVE_LINKFLAGS can reuse the
dnl results of this search when this library appears as a dependency.
HAVE_LIB[]NAME=yes
undefine([Name])
undefine([NAME])
])
dnl AC_LIB_HAVE_LINKFLAGS(name, dependencies, includes, testcode)
dnl searches for libname and the libraries corresponding to explicit and
dnl implicit dependencies, together with the specified include files and
dnl the ability to compile and link the specified testcode. If found, it
dnl sets and AC_SUBSTs HAVE_LIB${NAME}=yes and the LIB${NAME} and
dnl LTLIB${NAME} variables and augments the CPPFLAGS variable, and
dnl #defines HAVE_LIB${NAME} to 1. Otherwise, it sets and AC_SUBSTs
dnl HAVE_LIB${NAME}=no and LIB${NAME} and LTLIB${NAME} to empty.
AC_DEFUN([AC_LIB_HAVE_LINKFLAGS],
[
AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
AC_REQUIRE([AC_LIB_RPATH])
define([Name],[translit([$1],[./-], [___])])
define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
[ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
dnl Search for lib[]Name and define LIB[]NAME, LTLIB[]NAME and INC[]NAME
dnl accordingly.
AC_LIB_LINKFLAGS_BODY([$1], [$2])
dnl Add $INC[]NAME to CPPFLAGS before performing the following checks,
dnl because if the user has installed lib[]Name and not disabled its use
dnl via --without-lib[]Name-prefix, he wants to use it.
ac_save_CPPFLAGS="$CPPFLAGS"
AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME)
AC_CACHE_CHECK([for lib[]$1], [ac_cv_lib[]Name], [
ac_save_LIBS="$LIBS"
LIBS="$LIBS $LIB[]NAME"
AC_TRY_LINK([$3], [$4], [ac_cv_lib[]Name=yes], [ac_cv_lib[]Name=no])
LIBS="$ac_save_LIBS"
])
if test "$ac_cv_lib[]Name" = yes; then
HAVE_LIB[]NAME=yes
AC_DEFINE([HAVE_LIB]NAME, 1, [Define if you have the $1 library.])
AC_MSG_CHECKING([how to link with lib[]$1])
AC_MSG_RESULT([$LIB[]NAME])
else
HAVE_LIB[]NAME=no
dnl If $LIB[]NAME didn't lead to a usable library, we don't need
dnl $INC[]NAME either.
CPPFLAGS="$ac_save_CPPFLAGS"
LIB[]NAME=
LTLIB[]NAME=
fi
AC_SUBST([HAVE_LIB]NAME)
AC_SUBST([LIB]NAME)
AC_SUBST([LTLIB]NAME)
undefine([Name])
undefine([NAME])
])
dnl Determine the platform dependent parameters needed to use rpath:
dnl libext, shlibext, hardcode_libdir_flag_spec, hardcode_libdir_separator,
dnl hardcode_direct, hardcode_minus_L.
AC_DEFUN([AC_LIB_RPATH],
[
dnl Tell automake >= 1.10 to complain if config.rpath is missing.
m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([config.rpath])])
AC_REQUIRE([AC_PROG_CC]) dnl we use $CC, $GCC, $LDFLAGS
AC_REQUIRE([AC_LIB_PROG_LD]) dnl we use $LD, $with_gnu_ld
AC_REQUIRE([AC_CANONICAL_HOST]) dnl we use $host
AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT]) dnl we use $ac_aux_dir
AC_CACHE_CHECK([for shared library run path origin], acl_cv_rpath, [
CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \
${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh
. ./conftest.sh
rm -f ./conftest.sh
acl_cv_rpath=done
])
wl="$acl_cv_wl"
libext="$acl_cv_libext"
shlibext="$acl_cv_shlibext"
hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec"
hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator"
hardcode_direct="$acl_cv_hardcode_direct"
hardcode_minus_L="$acl_cv_hardcode_minus_L"
dnl Determine whether the user wants rpath handling at all.
AC_ARG_ENABLE(rpath,
[ --disable-rpath do not hardcode runtime library paths],
:, enable_rpath=yes)
])
dnl AC_LIB_LINKFLAGS_BODY(name [, dependencies]) searches for libname and
dnl the libraries corresponding to explicit and implicit dependencies.
dnl Sets the LIB${NAME}, LTLIB${NAME} and INC${NAME} variables.
AC_DEFUN([AC_LIB_LINKFLAGS_BODY],
[
define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
[ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
dnl By default, look in $includedir and $libdir.
use_additional=yes
AC_LIB_WITH_FINAL_PREFIX([
eval additional_includedir=\"$includedir\"
eval additional_libdir=\"$libdir\"
])
AC_LIB_ARG_WITH([lib$1-prefix],
[ --with-lib$1-prefix[=DIR] search for lib$1 in DIR/include and DIR/lib
--without-lib$1-prefix don't search for lib$1 in includedir and libdir],
[
if test "X$withval" = "Xno"; then
use_additional=no
else
if test "X$withval" = "X"; then
AC_LIB_WITH_FINAL_PREFIX([
eval additional_includedir=\"$includedir\"
eval additional_libdir=\"$libdir\"
])
else
additional_includedir="$withval/include"
additional_libdir="$withval/lib"
fi
fi
])
dnl Search the library and its dependencies in $additional_libdir and
dnl $LDFLAGS. Using breadth-first-seach.
LIB[]NAME=
LTLIB[]NAME=
INC[]NAME=
rpathdirs=
ltrpathdirs=
names_already_handled=
names_next_round='$1 $2'
while test -n "$names_next_round"; do
names_this_round="$names_next_round"
names_next_round=
for name in $names_this_round; do
already_handled=
for n in $names_already_handled; do
if test "$n" = "$name"; then
already_handled=yes
break
fi
done
if test -z "$already_handled"; then
names_already_handled="$names_already_handled $name"
dnl See if it was already located by an earlier AC_LIB_LINKFLAGS
dnl or AC_LIB_HAVE_LINKFLAGS call.
uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'`
eval value=\"\$HAVE_LIB$uppername\"
if test -n "$value"; then
if test "$value" = yes; then
eval value=\"\$LIB$uppername\"
test -z "$value" || LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$value"
eval value=\"\$LTLIB$uppername\"
test -z "$value" || LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$value"
else
dnl An earlier call to AC_LIB_HAVE_LINKFLAGS has determined
dnl that this library doesn't exist. So just drop it.
:
fi
else
dnl Search the library lib$name in $additional_libdir and $LDFLAGS
dnl and the already constructed $LIBNAME/$LTLIBNAME.
found_dir=
found_la=
found_so=
found_a=
if test $use_additional = yes; then
if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext"; then
found_dir="$additional_libdir"
found_so="$additional_libdir/lib$name.$shlibext"
if test -f "$additional_libdir/lib$name.la"; then
found_la="$additional_libdir/lib$name.la"
fi
else
if test -f "$additional_libdir/lib$name.$libext"; then
found_dir="$additional_libdir"
found_a="$additional_libdir/lib$name.$libext"
if test -f "$additional_libdir/lib$name.la"; then
found_la="$additional_libdir/lib$name.la"
fi
fi
fi
fi
if test "X$found_dir" = "X"; then
for x in $LDFLAGS $LTLIB[]NAME; do
AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
case "$x" in
-L*)
dir=`echo "X$x" | sed -e 's/^X-L//'`
if test -n "$shlibext" && test -f "$dir/lib$name.$shlibext"; then
found_dir="$dir"
found_so="$dir/lib$name.$shlibext"
if test -f "$dir/lib$name.la"; then
found_la="$dir/lib$name.la"
fi
else
if test -f "$dir/lib$name.$libext"; then
found_dir="$dir"
found_a="$dir/lib$name.$libext"
if test -f "$dir/lib$name.la"; then
found_la="$dir/lib$name.la"
fi
fi
fi
;;
esac
if test "X$found_dir" != "X"; then
break
fi
done
fi
if test "X$found_dir" != "X"; then
dnl Found the library.
LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$found_dir -l$name"
if test "X$found_so" != "X"; then
dnl Linking with a shared library. We attempt to hardcode its
dnl directory into the executable's runpath, unless it's the
dnl standard /usr/lib.
if test "$enable_rpath" = no || test "X$found_dir" = "X/usr/lib"; then
dnl No hardcoding is needed.
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
else
dnl Use an explicit option to hardcode DIR into the resulting
dnl binary.
dnl Potentially add DIR to ltrpathdirs.
dnl The ltrpathdirs will be appended to $LTLIBNAME at the end.
haveit=
for x in $ltrpathdirs; do
if test "X$x" = "X$found_dir"; then
haveit=yes
break
fi
done
if test -z "$haveit"; then
ltrpathdirs="$ltrpathdirs $found_dir"
fi
dnl The hardcoding into $LIBNAME is system dependent.
if test "$hardcode_direct" = yes; then
dnl Using DIR/libNAME.so during linking hardcodes DIR into the
dnl resulting binary.
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
else
if test -n "$hardcode_libdir_flag_spec" && test "$hardcode_minus_L" = no; then
dnl Use an explicit option to hardcode DIR into the resulting
dnl binary.
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
dnl Potentially add DIR to rpathdirs.
dnl The rpathdirs will be appended to $LIBNAME at the end.
haveit=
for x in $rpathdirs; do
if test "X$x" = "X$found_dir"; then
haveit=yes
break
fi
done
if test -z "$haveit"; then
rpathdirs="$rpathdirs $found_dir"
fi
else
dnl Rely on "-L$found_dir".
dnl But don't add it if it's already contained in the LDFLAGS
dnl or the already constructed $LIBNAME
haveit=
for x in $LDFLAGS $LIB[]NAME; do
AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
if test "X$x" = "X-L$found_dir"; then
haveit=yes
break
fi
done
if test -z "$haveit"; then
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir"
fi
if test "$hardcode_minus_L" != no; then
dnl FIXME: Not sure whether we should use
dnl "-L$found_dir -l$name" or "-L$found_dir $found_so"
dnl here.
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
else
dnl We cannot use $hardcode_runpath_var and LD_RUN_PATH
dnl here, because this doesn't fit in flags passed to the
dnl compiler. So give up. No hardcoding. This affects only
dnl very old systems.
dnl FIXME: Not sure whether we should use
dnl "-L$found_dir -l$name" or "-L$found_dir $found_so"
dnl here.
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name"
fi
fi
fi
fi
else
if test "X$found_a" != "X"; then
dnl Linking with a static library.
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_a"
else
dnl We shouldn't come here, but anyway it's good to have a
dnl fallback.
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir -l$name"
fi
fi
dnl Assume the include files are nearby.
additional_includedir=
case "$found_dir" in
*/lib | */lib/)
basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e 's,/lib/*$,,'`
additional_includedir="$basedir/include"
;;
esac
if test "X$additional_includedir" != "X"; then
dnl Potentially add $additional_includedir to $INCNAME.
dnl But don't add it
dnl 1. if it's the standard /usr/include,
dnl 2. if it's /usr/local/include and we are using GCC on Linux,
dnl 3. if it's already present in $CPPFLAGS or the already
dnl constructed $INCNAME,
dnl 4. if it doesn't exist as a directory.
if test "X$additional_includedir" != "X/usr/include"; then
haveit=
if test "X$additional_includedir" = "X/usr/local/include"; then
if test -n "$GCC"; then
case $host_os in
linux* | gnu* | k*bsd*-gnu) haveit=yes;;
esac
fi
fi
if test -z "$haveit"; then
for x in $CPPFLAGS $INC[]NAME; do
AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
if test "X$x" = "X-I$additional_includedir"; then
haveit=yes
break
fi
done
if test -z "$haveit"; then
if test -d "$additional_includedir"; then
dnl Really add $additional_includedir to $INCNAME.
INC[]NAME="${INC[]NAME}${INC[]NAME:+ }-I$additional_includedir"
fi
fi
fi
fi
fi
dnl Look for dependencies.
if test -n "$found_la"; then
dnl Read the .la file. It defines the variables
dnl dlname, library_names, old_library, dependency_libs, current,
dnl age, revision, installed, dlopen, dlpreopen, libdir.
save_libdir="$libdir"
case "$found_la" in
*/* | *\\*) . "$found_la" ;;
*) . "./$found_la" ;;
esac
libdir="$save_libdir"
dnl We use only dependency_libs.
for dep in $dependency_libs; do
case "$dep" in
-L*)
additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
dnl Potentially add $additional_libdir to $LIBNAME and $LTLIBNAME.
dnl But don't add it
dnl 1. if it's the standard /usr/lib,
dnl 2. if it's /usr/local/lib and we are using GCC on Linux,
dnl 3. if it's already present in $LDFLAGS or the already
dnl constructed $LIBNAME,
dnl 4. if it doesn't exist as a directory.
if test "X$additional_libdir" != "X/usr/lib"; then
haveit=
if test "X$additional_libdir" = "X/usr/local/lib"; then
if test -n "$GCC"; then
case $host_os in
linux* | gnu* | k*bsd*-gnu) haveit=yes;;
esac
fi
fi
if test -z "$haveit"; then
haveit=
for x in $LDFLAGS $LIB[]NAME; do
AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
if test "X$x" = "X-L$additional_libdir"; then
haveit=yes
break
fi
done
if test -z "$haveit"; then
if test -d "$additional_libdir"; then
dnl Really add $additional_libdir to $LIBNAME.
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$additional_libdir"
fi
fi
haveit=
for x in $LDFLAGS $LTLIB[]NAME; do
AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
if test "X$x" = "X-L$additional_libdir"; then
haveit=yes
break
fi
done
if test -z "$haveit"; then
if test -d "$additional_libdir"; then
dnl Really add $additional_libdir to $LTLIBNAME.
LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$additional_libdir"
fi
fi
fi
fi
;;
-R*)
dir=`echo "X$dep" | sed -e 's/^X-R//'`
if test "$enable_rpath" != no; then
dnl Potentially add DIR to rpathdirs.
dnl The rpathdirs will be appended to $LIBNAME at the end.
haveit=
for x in $rpathdirs; do
if test "X$x" = "X$dir"; then
haveit=yes
break
fi
done
if test -z "$haveit"; then
rpathdirs="$rpathdirs $dir"
fi
dnl Potentially add DIR to ltrpathdirs.
dnl The ltrpathdirs will be appended to $LTLIBNAME at the end.
haveit=
for x in $ltrpathdirs; do
if test "X$x" = "X$dir"; then
haveit=yes
break
fi
done
if test -z "$haveit"; then
ltrpathdirs="$ltrpathdirs $dir"
fi
fi
;;
-l*)
dnl Handle this in the next round.
names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'`
;;
*.la)
dnl Handle this in the next round. Throw away the .la's
dnl directory; it is already contained in a preceding -L
dnl option.
names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
;;
*)
dnl Most likely an immediate library name.
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$dep"
LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$dep"
;;
esac
done
fi
else
dnl Didn't find the library; assume it is in the system directories
dnl known to the linker and runtime loader. (All the system
dnl directories known to the linker should also be known to the
dnl runtime loader, otherwise the system is severely misconfigured.)
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name"
LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-l$name"
fi
fi
fi
done
done
if test "X$rpathdirs" != "X"; then
if test -n "$hardcode_libdir_separator"; then
dnl Weird platform: only the last -rpath option counts, the user must
dnl pass all path elements in one option. We can arrange that for a
dnl single library, but not when more than one $LIBNAMEs are used.
alldirs=
for found_dir in $rpathdirs; do
alldirs="${alldirs}${alldirs:+$hardcode_libdir_separator}$found_dir"
done
dnl Note: hardcode_libdir_flag_spec uses $libdir and $wl.
acl_save_libdir="$libdir"
libdir="$alldirs"
eval flag=\"$hardcode_libdir_flag_spec\"
libdir="$acl_save_libdir"
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag"
else
dnl The -rpath options are cumulative.
for found_dir in $rpathdirs; do
acl_save_libdir="$libdir"
libdir="$found_dir"
eval flag=\"$hardcode_libdir_flag_spec\"
libdir="$acl_save_libdir"
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag"
done
fi
fi
if test "X$ltrpathdirs" != "X"; then
dnl When using libtool, the option that works for both libraries and
dnl executables is -R. The -R options are cumulative.
for found_dir in $ltrpathdirs; do
LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-R$found_dir"
done
fi
])
dnl AC_LIB_APPENDTOVAR(VAR, CONTENTS) appends the elements of CONTENTS to VAR,
dnl unless already present in VAR.
dnl Works only for CPPFLAGS, not for LIB* variables because that sometimes
dnl contains two or three consecutive elements that belong together.
AC_DEFUN([AC_LIB_APPENDTOVAR],
[
for element in [$2]; do
haveit=
for x in $[$1]; do
AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
if test "X$x" = "X$element"; then
haveit=yes
break
fi
done
if test -z "$haveit"; then
[$1]="${[$1]}${[$1]:+ }$element"
fi
done
])

153
m4/lib-prefix.m4 Normal file
View File

@ -0,0 +1,153 @@
# lib-prefix.m4 serial 4 (gettext-0.14.2)
dnl Copyright (C) 2001-2005 Free Software Foundation, Inc.
dnl This file is free software; the Free Software Foundation
dnl gives unlimited permission to copy and/or distribute it,
dnl with or without modifications, as long as this notice is preserved.
dnl From Bruno Haible.
dnl AC_LIB_ARG_WITH is synonymous to AC_ARG_WITH in autoconf-2.13, and
dnl similar to AC_ARG_WITH in autoconf 2.52...2.57 except that is doesn't
dnl require excessive bracketing.
ifdef([AC_HELP_STRING],
[AC_DEFUN([AC_LIB_ARG_WITH], [AC_ARG_WITH([$1],[[$2]],[$3],[$4])])],
[AC_DEFUN([AC_][LIB_ARG_WITH], [AC_ARG_WITH([$1],[$2],[$3],[$4])])])
dnl AC_LIB_PREFIX adds to the CPPFLAGS and LDFLAGS the flags that are needed
dnl to access previously installed libraries. The basic assumption is that
dnl a user will want packages to use other packages he previously installed
dnl with the same --prefix option.
dnl This macro is not needed if only AC_LIB_LINKFLAGS is used to locate
dnl libraries, but is otherwise very convenient.
AC_DEFUN([AC_LIB_PREFIX],
[
AC_BEFORE([$0], [AC_LIB_LINKFLAGS])
AC_REQUIRE([AC_PROG_CC])
AC_REQUIRE([AC_CANONICAL_HOST])
AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
dnl By default, look in $includedir and $libdir.
use_additional=yes
AC_LIB_WITH_FINAL_PREFIX([
eval additional_includedir=\"$includedir\"
eval additional_libdir=\"$libdir\"
])
AC_LIB_ARG_WITH([lib-prefix],
[ --with-lib-prefix[=DIR] search for libraries in DIR/include and DIR/lib
--without-lib-prefix don't search for libraries in includedir and libdir],
[
if test "X$withval" = "Xno"; then
use_additional=no
else
if test "X$withval" = "X"; then
AC_LIB_WITH_FINAL_PREFIX([
eval additional_includedir=\"$includedir\"
eval additional_libdir=\"$libdir\"
])
else
additional_includedir="$withval/include"
additional_libdir="$withval/lib"
fi
fi
])
if test $use_additional = yes; then
dnl Potentially add $additional_includedir to $CPPFLAGS.
dnl But don't add it
dnl 1. if it's the standard /usr/include,
dnl 2. if it's already present in $CPPFLAGS,
dnl 3. if it's /usr/local/include and we are using GCC on Linux,
dnl 4. if it doesn't exist as a directory.
if test "X$additional_includedir" != "X/usr/include"; then
haveit=
for x in $CPPFLAGS; do
AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
if test "X$x" = "X-I$additional_includedir"; then
haveit=yes
break
fi
done
if test -z "$haveit"; then
if test "X$additional_includedir" = "X/usr/local/include"; then
if test -n "$GCC"; then
case $host_os in
linux* | gnu* | k*bsd*-gnu) haveit=yes;;
esac
fi
fi
if test -z "$haveit"; then
if test -d "$additional_includedir"; then
dnl Really add $additional_includedir to $CPPFLAGS.
CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }-I$additional_includedir"
fi
fi
fi
fi
dnl Potentially add $additional_libdir to $LDFLAGS.
dnl But don't add it
dnl 1. if it's the standard /usr/lib,
dnl 2. if it's already present in $LDFLAGS,
dnl 3. if it's /usr/local/lib and we are using GCC on Linux,
dnl 4. if it doesn't exist as a directory.
if test "X$additional_libdir" != "X/usr/lib"; then
haveit=
for x in $LDFLAGS; do
AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
if test "X$x" = "X-L$additional_libdir"; then
haveit=yes
break
fi
done
if test -z "$haveit"; then
if test "X$additional_libdir" = "X/usr/local/lib"; then
if test -n "$GCC"; then
case $host_os in
linux*) haveit=yes;;
esac
fi
fi
if test -z "$haveit"; then
if test -d "$additional_libdir"; then
dnl Really add $additional_libdir to $LDFLAGS.
LDFLAGS="${LDFLAGS}${LDFLAGS:+ }-L$additional_libdir"
fi
fi
fi
fi
fi
])
dnl AC_LIB_PREPARE_PREFIX creates variables acl_final_prefix,
dnl acl_final_exec_prefix, containing the values to which $prefix and
dnl $exec_prefix will expand at the end of the configure script.
AC_DEFUN([AC_LIB_PREPARE_PREFIX],
[
dnl Unfortunately, prefix and exec_prefix get only finally determined
dnl at the end of configure.
if test "X$prefix" = "XNONE"; then
acl_final_prefix="$ac_default_prefix"
else
acl_final_prefix="$prefix"
fi
if test "X$exec_prefix" = "XNONE"; then
acl_final_exec_prefix='${prefix}'
else
acl_final_exec_prefix="$exec_prefix"
fi
acl_save_prefix="$prefix"
prefix="$acl_final_prefix"
eval acl_final_exec_prefix=\"$acl_final_exec_prefix\"
prefix="$acl_save_prefix"
])
dnl AC_LIB_WITH_FINAL_PREFIX([statement]) evaluates statement, with the
dnl variables prefix and exec_prefix bound to the values they will have
dnl at the end of the configure script.
AC_DEFUN([AC_LIB_WITH_FINAL_PREFIX],
[
acl_save_prefix="$prefix"
prefix="$acl_final_prefix"
acl_save_exec_prefix="$exec_prefix"
exec_prefix="$acl_final_exec_prefix"
$1
exec_prefix="$acl_save_exec_prefix"
prefix="$acl_save_prefix"
])

View File

@ -378,6 +378,3 @@ fi
AC_SUBST($1)dnl AC_SUBST($1)dnl
]) ])
# Include libtool code.
builtin(include, libtool.m4)dnl

View File

@ -51,13 +51,14 @@ CPPFLAGS = @CPPFLAGS@
DEFS = @DEFS@ -DSYSTEM_WGETRC=\"$(sysconfdir)/wgetrc\" -DLOCALEDIR=\"$(localedir)\" DEFS = @DEFS@ -DSYSTEM_WGETRC=\"$(sysconfdir)/wgetrc\" -DLOCALEDIR=\"$(localedir)\"
CFLAGS = @CFLAGS@ CFLAGS = @CFLAGS@
LDFLAGS = @LDFLAGS@ LDFLAGS = @LDFLAGS@
LIBS = @LIBS@ LIBS = @LIBS@ @LIBSSL@
exeext = @exeext@ exeext = @exeext@
INCLUDES = -I. -I$(srcdir) @SSL_INCLUDES@ #INCLUDES = -I. -I$(srcdir) @SSL_INCLUDES@
INCLUDES = -I. -I$(srcdir)
COMPILE = $(CC) $(INCLUDES) $(CPPFLAGS) $(DEFS) $(CFLAGS) COMPILE = $(CC) $(INCLUDES) $(CPPFLAGS) $(DEFS) $(CFLAGS)
LINK = @LIBTOOL@ --mode=link $(CC) $(CFLAGS) $(LDFLAGS) -o $@ LINK = $(CC) $(CFLAGS) $(LDFLAGS) -o $@
INSTALL = @INSTALL@ INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_PROGRAM = @INSTALL_PROGRAM@
RM = rm -f RM = rm -f