wget/doc/wget.info-1

This is Info file wget.info, produced by Makeinfo version 1.68 from the
input file ./wget.texi.

INFO-DIR-SECTION Net Utilities
INFO-DIR-SECTION World Wide Web
START-INFO-DIR-ENTRY
* Wget: (wget).         The non-interactive network downloader.
END-INFO-DIR-ENTRY

   This file documents the the GNU Wget utility for downloading network
data.

   Copyright (C) 1996, 1997, 1998, 2000 Free Software Foundation, Inc.

   Permission is granted to make and distribute verbatim copies of this
manual provided the copyright notice and this permission notice are
preserved on all copies.

   Permission is granted to copy and distribute modified versions of
this manual under the conditions for verbatim copying, provided also
that the sections entitled "Copying" and "GNU General Public License"
are included exactly as in the original, and provided that the entire
resulting derived work is distributed under the terms of a permission
notice identical to this one.


File: wget.info,  Node: Top,  Next: Overview,  Prev: (dir),  Up: (dir)

Wget 1.5.3+dev
**************

   This manual documents version 1.5.3+dev of GNU Wget, the freely
available utility for network download.

   Copyright (C) 1996, 1997, 1998 Free Software Foundation, Inc.

* Menu:

* Overview::            Features of Wget.
* Invoking::            Wget command-line arguments.
* Recursive Retrieval:: Description of recursive retrieval.
* Following Links::     The available methods of chasing links.
* Time-Stamping::       Mirroring according to time-stamps.
* Startup File::        Wget's initialization file.
* Examples::            Examples of usage.
* Various::             The stuff that doesn't fit anywhere else.
* Appendices::          Some useful references.
* Copying::             You may give out copies of Wget.
* Concept Index::       Topics covered by this manual.


File: wget.info,  Node: Overview,  Next: Invoking,  Prev: Top,  Up: Top

Overview
********

   GNU Wget is a freely available network utility to retrieve files from
the World Wide Web, using HTTP (Hyper Text Transfer Protocol) and FTP
(File Transfer Protocol), the two most widely used Internet protocols.
It has many useful features to make downloading easier, some of them
being:

   * Wget is non-interactive, meaning that it can work in the
     background, while the user is not logged on.  This allows you to
     start a retrieval and disconnect from the system, letting Wget
     finish the work.  By contrast, most of the Web browsers require
     constant user's presence, which can be a great hindrance when
     transferring a lot of data.

   * Wget is capable of descending recursively through the structure of
     HTML documents and FTP directory trees, making a local copy of the
     directory hierarchy similar to the one on the remote server.  This
     feature can be used to mirror archives and home pages, or traverse
     the web in search of data, like a WWW robot (*Note Robots::).  In
     that spirit, Wget understands the `norobots' convention.

   * File name wildcard matching and recursive mirroring of directories
     are available when retrieving via FTP.  Wget can read the
     time-stamp information given by both HTTP and FTP servers, and
     store it locally.  Thus Wget can see if the remote file has
     changed since last retrieval, and automatically retrieve the new
     version if it has.  This makes Wget suitable for mirroring of FTP
     sites, as well as home pages.

   * Wget works exceedingly well on slow or unstable connections,
     retrying the document until it is fully retrieved, or until a
     user-specified retry count is surpassed.  It will try to resume the
     download from the point of interruption, using `REST' with FTP and
     `Range' with HTTP servers that support them.

   * By default, Wget supports proxy servers, which can lighten the
     network load, speed up retrieval and provide access behind
     firewalls.  However, if you are behind a firewall that requires
     that you use a socks style gateway, you can get the socks library
     and build wget with support for socks.  Wget also supports the
     passive FTP downloading as an option.

   * Builtin features offer mechanisms to tune which links you wish to
     follow (*Note Following Links::).

   * The retrieval is conveniently traced with printing dots, each dot
     representing a fixed amount of data received (1KB by default).
     These representations can be customized to your preferences.

   * Most of the features are fully configurable, either through
     command line options, or via the initialization file `.wgetrc'
     (*Note Startup File::).  Wget allows you to define "global"
     startup files (`/usr/local/etc/wgetrc' by default) for site
     settings.

   * Finally, GNU Wget is free software.  This means that everyone may
     use it, redistribute it and/or modify it under the terms of the
     GNU General Public License, as published by the Free Software
     Foundation (*Note Copying::).


File: wget.info,  Node: Invoking,  Next: Recursive Retrieval,  Prev: Overview,  Up: Top

Invoking
********

   By default, Wget is very simple to invoke.  The basic syntax is:

     wget [OPTION]... [URL]...

   Wget will simply download all the URLs specified on the command
line.  URL is a "Uniform Resource Locator", as defined below.

   However, you may wish to change some of the default parameters of
Wget.  You can do it two ways: permanently, adding the appropriate
command to `.wgetrc' (*Note Startup File::), or specifying it on the
command line.

* Menu:

* URL Format::
* Option Syntax::
* Basic Startup Options::
* Logging and Input File Options::
* Download Options::
* Directory Options::
* HTTP Options::
* FTP Options::
* Recursive Retrieval Options::
* Recursive Accept/Reject Options::


File: wget.info,  Node: URL Format,  Next: Option Syntax,  Prev: Invoking,  Up: Invoking

URL Format
==========

   "URL" is an acronym for Uniform Resource Locator.  A uniform
resource locator is a compact string representation for a resource
available via the Internet.  Wget recognizes the URL syntax as per
RFC1738.  This is the most widely used form (square brackets denote
optional parts):

     http://host[:port]/directory/file
     ftp://host[:port]/directory/file

   You can also encode your username and password within a URL:

     ftp://user:password@host/path
     http://user:password@host/path

   Either USER or PASSWORD, or both, may be left out.  If you leave out
either the HTTP username or password, no authentication will be sent.
If you leave out the FTP username, `anonymous' will be used.  If you
leave out the FTP password, your email address will be supplied as a
default password.(1)

   You can encode unsafe characters in a URL as `%xy', `xy' being the
hexadecimal representation of the character's ASCII value.  Some common
unsafe characters include `%' (quoted as `%25'), `:' (quoted as `%3A'),
and `@' (quoted as `%40').  Refer to RFC1738 for a comprehensive list
of unsafe characters.

   Wget also supports the `type' feature for FTP URLs.  By default, FTP
documents are retrieved in the binary mode (type `i'), which means that
they are downloaded unchanged.  Another useful mode is the `a'
("ASCII") mode, which converts the line delimiters between the
different operating systems, and is thus useful for text files.  Here
is an example:

     ftp://host/directory/file;type=a

   Two alternative variants of URL specification are also supported,
because of historical (hysterical?) reasons and their widespreaded use.

   FTP-only syntax (supported by `NcFTP'):
     host:/dir/file

   HTTP-only syntax (introduced by `Netscape'):
     host[:port]/dir/file

   These two alternative forms are deprecated, and may cease being
supported in the future.

   If you do not understand the difference between these notations, or
do not know which one to use, just use the plain ordinary format you use
with your favorite browser, like `Lynx' or `Netscape'.

   ---------- Footnotes ----------

   (1) If you have a `.netrc' file in your home directory, password
will also be searched for there.


File: wget.info,  Node: Option Syntax,  Next: Basic Startup Options,  Prev: URL Format,  Up: Invoking

Option Syntax
=============

   Since Wget uses GNU getopts to process its arguments, every option
has a short form and a long form.  Long options are more convenient to
remember, but take time to type.  You may freely mix different option
styles, or specify options after the command-line arguments. Thus you
may write:

     wget -r --tries=10 http://fly.cc.fer.hr/ -o log

   The space between the option accepting an argument and the argument
may be omitted.  Instead `-o log' you can write `-olog'.

   You may put several options that do not require arguments together,
like:

     wget -drc URL

   This is a complete equivalent of:

     wget -d -r -c URL

   Since the options can be specified after the arguments, you may
terminate them with `--'.  So the following will try to download URL
`-x', reporting failure to `log':

     wget -o log -- -x

   The options that accept comma-separated lists all respect the
convention that specifying an empty list clears its value.  This can be
useful to clear the `.wgetrc' settings.  For instance, if your `.wgetrc'
sets `exclude_directories' to `/cgi-bin', the following example will
first reset it, and then set it to exclude `/~nobody' and `/~somebody'.
You can also clear the lists in `.wgetrc' (*Note Wgetrc Syntax::).

     wget -X '' -X /~nobody,/~somebody


File: wget.info,  Node: Basic Startup Options,  Next: Logging and Input File Options,  Prev: Option Syntax,  Up: Invoking

Basic Startup Options
=====================

`-V'
`--version'
     Display the version of Wget.

`-h'
`--help'
     Print a help message describing all of Wget's command-line options.

`-b'
`--background'
     Go to background immediately after startup.  If no output file is
     specified via the `-o', output is redirected to `wget-log'.

`-e COMMAND'
`--execute COMMAND'
     Execute COMMAND as if it were a part of `.wgetrc' (*Note Startup
     File::).  A command thus invoked will be executed *after* the
     commands in `.wgetrc', thus taking precedence over them.


File: wget.info,  Node: Logging and Input File Options,  Next: Download Options,  Prev: Basic Startup Options,  Up: Invoking

Logging and Input File Options
==============================

`-o LOGFILE'
`--output-file=LOGFILE'
     Log all messages to LOGFILE.  The messages are normally reported
     to standard error.

`-a LOGFILE'
`--append-output=LOGFILE'
     Append to LOGFILE.  This is the same as `-o', only it appends to
     LOGFILE instead of overwriting the old log file.  If LOGFILE does
     not exist, a new file is created.

`-d'
`--debug'
     Turn on debug output, meaning various information important to the
     developers of Wget if it does not work properly.  Your system
     administrator may have chosen to compile Wget without debug
     support, in which case `-d' will not work.  Please note that
     compiling with debug support is always safe--Wget compiled with
     the debug support will *not* print any debug info unless requested
     with `-d'.  *Note Reporting Bugs:: for more information on how to
     use `-d' for sending bug reports.

`-q'
`--quiet'
     Turn off Wget's output.

`-v'
`--verbose'
     Turn on verbose output, with all the available data.  The default
     output is verbose.

`-nv'
`--non-verbose'
     Non-verbose output--turn off verbose without being completely quiet
     (use `-q' for that), which means that error messages and basic
     information still get printed.

`-i FILE'
`--input-file=FILE'
     Read URLs from FILE, in which case no URLs need to be on the
     command line.  If there are URLs both on the command line and in
     an input file, those on the command lines will be the first ones to
     be retrieved.  The FILE need not be an HTML document (but no harm
     if it is)--it is enough if the URLs are just listed sequentially.

     However, if you specify `--force-html', the document will be
     regarded as `html'.  In that case you may have problems with
     relative links, which you can solve either by adding `<base
     href="URL">' to the documents or by specifying `--base=URL' on the
     command line.

`-F'
`--force-html'
     When input is read from a file, force it to be treated as an HTML
     file.  This enables you to retrieve relative links from existing
     HTML files on your local disk, by adding `<base href="URL">' to
     HTML, or using the `--base' command-line option.

`-B URL'
`--base=URL'
     When used in conjunction with `-F', prepends URL to relative links
     in the file specified by `-i'.


File: wget.info,  Node: Download Options,  Next: Directory Options,  Prev: Logging and Input File Options,  Up: Invoking

Download Options
================

`-t NUMBER'
`--tries=NUMBER'
     Set number of retries to NUMBER.  Specify 0 or `inf' for infinite
     retrying.

`-O FILE'
`--output-document=FILE'
     The documents will not be written to the appropriate files, but
     all will be concatenated together and written to FILE.  If FILE
     already exists, it will be overwritten.  If the FILE is `-', the
     documents will be written to standard output.  Including this
     option automatically sets the number of tries to 1.

`-nc'
`--no-clobber'
     If a file is downloaded more than once in the same directory,
     wget's behavior depends on a few options, including `-nc'.  In
     certain cases, the local file will be "clobbered", or overwritten,
     upon repeated download.  In other cases it will be preserved.

     When running wget without `-N', `-nc', or `-r', downloading the
     same file in the same directory will result in the original copy
     of `FILE' being preserved and the second copy being named
     `FILE.1'.  If that file is downloaded yet again, the third copy
     will be named `FILE.2', and so on.  When `-nc' is specified, this
     behavior is suppressed, and wget will refuse to download newer
     copies of `FILE'.  Therefore, "no-clobber" is actually a misnomer
     in this mode - it's not clobbering that's prevented (as the
     numeric suffixes were already preventing clobbering), but rather
     the multiple version saving that's prevented.

     When running wget with `-r', but without `-N' or `-nc',
     re-downloading a file will result in the new copy simply
     overwriting the old.  Adding `-nc' will prevent this behavior,
     instead causing the original version to be preserved and any newer
     copies on the server to be ignored.

     When running wget with `-N', with or without `-r', the decision as
     to whether or not to download a newer copy of a file depends on
     the local and remote timestamp and size of the file (*Note
     Time-Stamping::).  `-nc' may not be specified at the same time as
     `-N'.

     Note that when `-nc' is specified, files with the suffixes `.html'
     or (yuck) `.htm' will be loaded from the local disk and parsed as
     if they had been retrieved from the Web.

`-c'
`--continue'
     Continue getting an existing file.  This is useful when you want to
     finish up the download started by another program, or a previous
     instance of Wget.  Thus you can write:

          wget -c ftp://sunsite.doc.ic.ac.uk/ls-lR.Z

     If there is a file name `ls-lR.Z' in the current directory, Wget
     will assume that it is the first portion of the remote file, and
     will require the server to continue the retrieval from an offset
     equal to the length of the local file.

     Note that you need not specify this option if all you want is Wget
     to continue retrieving where it left off when the connection is
     lost--Wget does this by default.  You need this option only when
     you want to continue retrieval of a file already halfway
     retrieved, saved by another FTP client, or left by Wget being
     killed.

     Without `-c', the previous example would just begin to download the
     remote file to `ls-lR.Z.1'.  The `-c' option is also applicable
     for HTTP servers that support the `Range' header.

     Note that if you use `-c' on a file that's already downloaded
     completely, `FILE' will not be changed, nor will a second `FILE.1'
     copy be created.

`--dot-style=STYLE'
     Set the retrieval style to STYLE.  Wget traces the retrieval of
     each document by printing dots on the screen, each dot
     representing a fixed amount of retrieved data.  Any number of dots
     may be separated in a "cluster", to make counting easier.  This
     option allows you to choose one of the pre-defined styles,
     determining the number of bytes represented by a dot, the number
     of dots in a cluster, and the number of dots on the line.

     With the `default' style each dot represents 1K, there are ten dots
     in a cluster and 50 dots in a line.  The `binary' style has a more
     "computer"-like orientation--8K dots, 16-dots clusters and 48 dots
     per line (which makes for 384K lines).  The `mega' style is
     suitable for downloading very large files--each dot represents 64K
     retrieved, there are eight dots in a cluster, and 48 dots on each
     line (so each line contains 3M).  The `micro' style is exactly the
     reverse; it is suitable for downloading small files, with 128-byte
     dots, 8 dots per cluster, and 48 dots (6K) per line.

`-N'
`--timestamping'
     Turn on time-stamping.  *Note Time-Stamping:: for details.

`-S'
`--server-response'
     Print the headers sent by HTTP servers and responses sent by FTP
     servers.

`--spider'
     When invoked with this option, Wget will behave as a Web "spider",
     which means that it will not download the pages, just check that
     they are there.  You can use it to check your bookmarks, e.g. with:

          wget --spider --force-html -i bookmarks.html

     This feature needs much more work for Wget to get close to the
     functionality of real WWW spiders.

`-T seconds'
`--timeout=SECONDS'
     Set the read timeout to SECONDS seconds.  Whenever a network read
     is issued, the file descriptor is checked for a timeout, which
     could otherwise leave a pending connection (uninterrupted read).
     The default timeout is 900 seconds (fifteen minutes).  Setting
     timeout to 0 will disable checking for timeouts.

     Please do not lower the default timeout value with this option
     unless you know what you are doing.

`-w SECONDS'
`--wait=SECONDS'
     Wait the specified number of seconds between the retrievals.  Use
     of this option is recommended, as it lightens the server load by
     making the requests less frequent.  Instead of in seconds, the
     time can be specified in minutes using the `m' suffix, in hours
     using `h' suffix, or in days using `d' suffix.

     Specifying a large value for this option is useful if the network
     or the destination host is down, so that Wget can wait long enough
     to reasonably expect the network error to be fixed before the
     retry.

`--waitretry=SECONDS'
     If you don't want Wget to wait between *every* retrieval, but only
     between retries of failed downloads, you can use this option.
     Wget will use "linear backoff", waiting 1 second after the first
     failure on a given file, then waiting 2 seconds after the second
     failure on that file, up to the maximum number of SECONDS you
     specify.  Therefore, a value of 10 will actually make Wget wait up
     to (1 + 2 + ... + 10) = 55 seconds per file.

     Note that this option is turned on by default in the global
     `wgetrc' file.

`-Y on/off'
`--proxy=on/off'
     Turn proxy support on or off. The proxy is on by default if the
     appropriate environmental variable is defined.

`-Q QUOTA'
`--quota=QUOTA'
     Specify download quota for automatic retrievals.  The value can be
     specified in bytes (default), kilobytes (with `k' suffix), or
     megabytes (with `m' suffix).

     Note that quota will never affect downloading a single file.  So
     if you specify `wget -Q10k ftp://wuarchive.wustl.edu/ls-lR.gz',
     all of the `ls-lR.gz' will be downloaded.  The same goes even when
     several URLs are specified on the command-line.  However, quota is
     respected when retrieving either recursively, or from an input
     file.  Thus you may safely type `wget -Q2m -i sites'--download
     will be aborted when the quota is exceeded.

     Setting quota to 0 or to `inf' unlimits the download quota.


File: wget.info,  Node: Directory Options,  Next: HTTP Options,  Prev: Download Options,  Up: Invoking

Directory Options
=================

`-nd'
`--no-directories'
     Do not create a hierarchy of directories when retrieving
     recursively. With this option turned on, all files will get saved
     to the current directory, without clobbering (if a name shows up
     more than once, the filenames will get extensions `.n').

`-x'
`--force-directories'
     The opposite of `-nd'--create a hierarchy of directories, even if
     one would not have been created otherwise.  E.g. `wget -x
     http://fly.cc.fer.hr/robots.txt' will save the downloaded file to
     `fly.cc.fer.hr/robots.txt'.

`-nH'
`--no-host-directories'
     Disable generation of host-prefixed directories.  By default,
     invoking Wget with `-r http://fly.cc.fer.hr/' will create a
     structure of directories beginning with `fly.cc.fer.hr/'.  This
     option disables such behavior.

`--cut-dirs=NUMBER'
     Ignore NUMBER directory components.  This is useful for getting a
     fine-grained control over the directory where recursive retrieval
     will be saved.

     Take, for example, the directory at
     `ftp://ftp.xemacs.org/pub/xemacs/'.  If you retrieve it with `-r',
     it will be saved locally under `ftp.xemacs.org/pub/xemacs/'.
     While the `-nH' option can remove the `ftp.xemacs.org/' part, you
     are still stuck with `pub/xemacs'.  This is where `--cut-dirs'
     comes in handy; it makes Wget not "see" NUMBER remote directory
     components.  Here are several examples of how `--cut-dirs' option
     works.

          No options        -> ftp.xemacs.org/pub/xemacs/
          -nH               -> pub/xemacs/
          -nH --cut-dirs=1  -> xemacs/
          -nH --cut-dirs=2  -> .
          
          --cut-dirs=1      -> ftp.xemacs.org/xemacs/
          ...

     If you just want to get rid of the directory structure, this
     option is similar to a combination of `-nd' and `-P'.  However,
     unlike `-nd', `--cut-dirs' does not lose with subdirectories--for
     instance, with `-nH --cut-dirs=1', a `beta/' subdirectory will be
     placed to `xemacs/beta', as one would expect.

`-P PREFIX'
`--directory-prefix=PREFIX'
     Set directory prefix to PREFIX.  The "directory prefix" is the
     directory where all other files and subdirectories will be saved
     to, i.e. the top of the retrieval tree.  The default is `.' (the
     current directory).


File: wget.info,  Node: HTTP Options,  Next: FTP Options,  Prev: Directory Options,  Up: Invoking

HTTP Options
============

`--http-user=USER'
`--http-passwd=PASSWORD'
     Specify the username USER and password PASSWORD on an HTTP server.
     According to the type of the challenge, Wget will encode them
     using either the `basic' (insecure) or the `digest' authentication
     scheme.

     Another way to specify username and password is in the URL itself
     (*Note URL Format::).  For more information about security issues
     with Wget, *Note Security Considerations::.

`-C on/off'
`--cache=on/off'
     When set to off, disable server-side cache.  In this case, Wget
     will send the remote server an appropriate directive (`Pragma:
     no-cache') to get the file from the remote service, rather than
     returning the cached version.  This is especially useful for
     retrieving and flushing out-of-date documents on proxy servers.

     Caching is allowed by default.

`--ignore-length'
     Unfortunately, some HTTP servers (CGI programs, to be more
     precise) send out bogus `Content-Length' headers, which makes Wget
     go wild, as it thinks not all the document was retrieved.  You can
     spot this syndrome if Wget retries getting the same document again
     and again, each time claiming that the (otherwise normal)
     connection has closed on the very same byte.

     With this option, Wget will ignore the `Content-Length' header--as
     if it never existed.

`--header=ADDITIONAL-HEADER'
     Define an ADDITIONAL-HEADER to be passed to the HTTP servers.
     Headers must contain a `:' preceded by one or more non-blank
     characters, and must not contain newlines.

     You may define more than one additional header by specifying
     `--header' more than once.

          wget --header='Accept-Charset: iso-8859-2' \
               --header='Accept-Language: hr'        \
                 http://fly.cc.fer.hr/

     Specification of an empty string as the header value will clear all
     previous user-defined headers.

`--proxy-user=USER'
`--proxy-passwd=PASSWORD'
     Specify the username USER and password PASSWORD for authentication
     on a proxy server.  Wget will encode them using the `basic'
     authentication scheme.

`--referer=URL'
     Include `Referer: URL' header in HTTP request.  Useful for
     retrieving documents with server-side processing that assume they
     are always being retrieved by interactive web browsers and only
     come out properly when Referer is set to one of the pages that
     point to them.

`-s'
`--save-headers'
     Save the headers sent by the HTTP server to the file, preceding the
     actual contents, with an empty line as the separator.

`-U AGENT-STRING'
`--user-agent=AGENT-STRING'
     Identify as AGENT-STRING to the HTTP server.

     The HTTP protocol allows the clients to identify themselves using a
     `User-Agent' header field.  This enables distinguishing the WWW
     software, usually for statistical purposes or for tracing of
     protocol violations.  Wget normally identifies as `Wget/VERSION',
     VERSION being the current version number of Wget.

     However, some sites have been known to impose the policy of
     tailoring the output according to the `User-Agent'-supplied
     information.  While conceptually this is not such a bad idea, it
     has been abused by servers denying information to clients other
     than `Mozilla' or Microsoft `Internet Explorer'.  This option
     allows you to change the `User-Agent' line issued by Wget.  Use of
     this option is discouraged, unless you really know what you are
     doing.

     *NOTE* that Netscape Communications Corp. has claimed that false
     transmissions of `Mozilla' as the `User-Agent' are a copyright
     infringement, which will be prosecuted.  *DO NOT* misrepresent
     Wget as Mozilla.


File: wget.info,  Node: FTP Options,  Next: Recursive Retrieval Options,  Prev: HTTP Options,  Up: Invoking

FTP Options
===========

`--retr-symlinks'
     Retrieve symbolic links on FTP sites as if they were plain files,
     i.e. don't just create links locally.

`-g on/off'
`--glob=on/off'
     Turn FTP globbing on or off.  Globbing means you may use the
     shell-like special characters ("wildcards"), like `*', `?', `['
     and `]' to retrieve more than one file from the same directory at
     once, like:

          wget ftp://gnjilux.cc.fer.hr/*.msg

     By default, globbing will be turned on if the URL contains a
     globbing character.  This option may be used to turn globbing on
     or off permanently.

     You may have to quote the URL to protect it from being expanded by
     your shell.  Globbing makes Wget look for a directory listing,
     which is system-specific.  This is why it currently works only
     with Unix FTP servers (and the ones emulating Unix `ls' output).

`--passive-ftp'
     Use the "passive" FTP retrieval scheme, in which the client
     initiates the data connection.  This is sometimes required for FTP
     to work behind firewalls.


File: wget.info,  Node: Recursive Retrieval Options,  Next: Recursive Accept/Reject Options,  Prev: FTP Options,  Up: Invoking

Recursive Retrieval Options
===========================

`-r'
`--recursive'
     Turn on recursive retrieving.  *Note Recursive Retrieval:: for more
     details.

`-l DEPTH'
`--level=DEPTH'
     Specify recursion maximum depth level DEPTH (*Note Recursive
     Retrieval::).  The default maximum depth is 5.

`--delete-after'
     This option tells Wget to delete every single file it downloads,
     *after* having done so.  It is useful for pre-fetching popular
     pages through proxy, e.g.:

          wget -r -nd --delete-after http://whatever.com/~popular/page/

     The `-r' option is to retrieve recursively, and `-nd' not to
     create directories.

`-k'
`--convert-links'
     Convert the non-relative links to relative ones locally.  Only the
     references to the documents actually downloaded will be converted;
     the rest will be left unchanged.

     Note that only at the end of the download can Wget know which
     links have been downloaded.  Because of that, much of the work
     done by `-k' will be performed at the end of the downloads.

`-K'
`--backup-converted'
     When converting a file, back up the original version with a `.orig'
     suffix.  Affects the behavior of `-N' (*Note HTTP Time-Stamping
     Internals::).

`-m'
`--mirror'
     Turn on options suitable for mirroring.  This option turns on
     recursion and time-stamping, sets infinite recursion depth and
     keeps FTP directory listings.  It is currently equivalent to `-r
     -N -l inf -nr'.

`-nr'
`--dont-remove-listing'
     Don't remove the temporary `.listing' files generated by FTP
     retrievals.  Normally, these files contain the raw directory
     listings received from FTP servers.  Not removing them can be
     useful to access the full remote file list when running a mirror,
     or for debugging purposes.


File: wget.info,  Node: Recursive Accept/Reject Options,  Prev: Recursive Retrieval Options,  Up: Invoking

Recursive Accept/Reject Options
===============================

`-A ACCLIST --accept ACCLIST'
`-R REJLIST --reject REJLIST'
     Specify comma-separated lists of file name suffixes or patterns to
     accept or reject (*Note Types of Files:: for more details).

`-D DOMAIN-LIST'
`--domains=DOMAIN-LIST'
     Set domains to be accepted and DNS looked-up, where DOMAIN-LIST is
     a comma-separated list.  Note that it does *not* turn on `-H'.
     This option speeds things up, even if only one host is spanned
     (*Note Domain Acceptance::).

`--exclude-domains DOMAIN-LIST'
     Exclude the domains given in a comma-separated DOMAIN-LIST from
     DNS-lookup (*Note Domain Acceptance::).

`--follow-ftp'
     Follow FTP links from HTML documents.  Without this option, Wget
     will ignore all the FTP links.

`--follow-tags=LIST'
     Wget has an internal table of HTML tag / attribute pairs that it
     considers when looking for linked documents during a recursive
     retrieval.  If a user wants only a subset of those tags to be
     considered, however, he or she should be specify such tags in a
     comma-separated LIST with this option.

`-G LIST'
`--ignore-tags=LIST'
     This is the opposite of the `--follow-tags' option.  To skip
     certain HTML tags when recursively looking for documents to
     download, specify them in a comma-separated LIST.  The author of
     this option likes to use the following command to download a
     single HTML page and all files (e.g. images, sounds, and
     stylesheets) necessary to display it properly:

          wget -Ga,area -H -k -K -nh -r http://SITE/DOCUMENT

`-H'
`--span-hosts'
     Enable spanning across hosts when doing recursive retrieving
     (*Note All Hosts::).

`-L'
`--relative'
     Follow relative links only.  Useful for retrieving a specific home
     page without any distractions, not even those from the same hosts
     (*Note Relative Links::).

`-I LIST'
`--include-directories=LIST'
     Specify a comma-separated list of directories you wish to follow
     when downloading (*Note Directory-Based Limits:: for more
     details.)  Elements of LIST may contain wildcards.

`-X LIST'
`--exclude-directories=LIST'
     Specify a comma-separated list of directories you wish to exclude
     from download (*Note Directory-Based Limits:: for more details.)
     Elements of LIST may contain wildcards.

`-nh'
`--no-host-lookup'
     Disable the time-consuming DNS lookup of almost all hosts (*Note
     Host Checking::).

`-np'

`--no-parent'
     Do not ever ascend to the parent directory when retrieving
     recursively.  This is a useful option, since it guarantees that
     only the files *below* a certain hierarchy will be downloaded.
     *Note Directory-Based Limits:: for more details.


File: wget.info,  Node: Recursive Retrieval,  Next: Following Links,  Prev: Invoking,  Up: Top

Recursive Retrieval
*******************

   GNU Wget is capable of traversing parts of the Web (or a single HTTP
or FTP server), depth-first following links and directory structure.
This is called "recursive" retrieving, or "recursion".

   With HTTP URLs, Wget retrieves and parses the HTML from the given
URL, documents, retrieving the files the HTML document was referring
to, through markups like `href', or `src'.  If the freshly downloaded
file is also of type `text/html', it will be parsed and followed
further.

   The maximum "depth" to which the retrieval may descend is specified
with the `-l' option (the default maximum depth is five layers).  *Note
Recursive Retrieval::.

   When retrieving an FTP URL recursively, Wget will retrieve all the
data from the given directory tree (including the subdirectories up to
the specified depth) on the remote server, creating its mirror image
locally.  FTP retrieval is also limited by the `depth' parameter.

   By default, Wget will create a local directory tree, corresponding to
the one found on the remote server.

   Recursive retrieving can find a number of applications, the most
important of which is mirroring.  It is also useful for WWW
presentations, and any other opportunities where slow network
connections should be bypassed by storing the files locally.

   You should be warned that invoking recursion may cause grave
overloading on your system, because of the fast exchange of data
through the network; all of this may hamper other users' work.  The
same stands for the foreign server you are mirroring--the more requests
it gets in a rows, the greater is its load.

   Careless retrieving can also fill your file system uncontrollably,
which can grind the machine to a halt.

   The load can be minimized by lowering the maximum recursion level
(`-l') and/or by lowering the number of retries (`-t').  You may also
consider using the `-w' option to slow down your requests to the remote
servers, as well as the numerous options to narrow the number of
followed links (*Note Following Links::).

   Recursive retrieval is a good thing when used properly.  Please take
all precautions not to wreak havoc through carelessness.


File: wget.info,  Node: Following Links,  Next: Time-Stamping,  Prev: Recursive Retrieval,  Up: Top

Following Links
***************

   When retrieving recursively, one does not wish to retrieve loads of
unnecessary data.  Most of the time the users bear in mind exactly what
they want to download, and want Wget to follow only specific links.

   For example, if you wish to download the music archive from
`fly.cc.fer.hr', you will not want to download all the home pages that
happen to be referenced by an obscure part of the archive.

   Wget possesses several mechanisms that allows you to fine-tune which
links it will follow.

* Menu:

* Relative Links::         Follow relative links only.
* Host Checking::          Follow links on the same host.
* Domain Acceptance::      Check on a list of domains.
* All Hosts::              No host restrictions.
* Types of Files::         Getting only certain files.
* Directory-Based Limits:: Getting only certain directories.
* FTP Links::              Following FTP links.


File: wget.info,  Node: Relative Links,  Next: Host Checking,  Prev: Following Links,  Up: Following Links

Relative Links
==============

   When only relative links are followed (option `-L'), recursive
retrieving will never span hosts.  No time-expensive DNS-lookups will
be performed, and the process will be very fast, with the minimum
strain of the network.  This will suit your needs often, especially when
mirroring the output of various `x2html' converters, since they
generally output relative links.


File: wget.info,  Node: Host Checking,  Next: Domain Acceptance,  Prev: Relative Links,  Up: Following Links

Host Checking
=============

   The drawback of following the relative links solely is that humans
often tend to mix them with absolute links to the very same host, and
the very same page.  In this mode (which is the default mode for
following links) all URLs that refer to the same host will be retrieved.

   The problem with this option are the aliases of the hosts and
domains.  Thus there is no way for Wget to know that `regoc.srce.hr' and
`www.srce.hr' are the same host, or that `fly.cc.fer.hr' is the same as
`fly.cc.etf.hr'.  Whenever an absolute link is encountered, the host is
DNS-looked-up with `gethostbyname' to check whether we are maybe
dealing with the same hosts.  Although the results of `gethostbyname'
are cached, it is still a great slowdown, e.g. when dealing with large
indices of home pages on different hosts (because each of the hosts
must be DNS-resolved to see whether it just *might* be an alias of the
starting host).

   To avoid the overhead you may use `-nh', which will turn off
DNS-resolving and make Wget compare hosts literally.  This will make
things run much faster, but also much less reliable (e.g. `www.srce.hr'
and `regoc.srce.hr' will be flagged as different hosts).

   Note that modern HTTP servers allow one IP address to host several
"virtual servers", each having its own directory hierarchy.  Such
"servers" are distinguished by their hostnames (all of which point to
the same IP address); for this to work, a client must send a `Host'
header, which is what Wget does.  However, in that case Wget *must not*
try to divine a host's "real" address, nor try to use the same hostname
for each access, i.e. `-nh' must be turned on.

   In other words, the `-nh' option must be used to enable the
retrieval from virtual servers distinguished by their hostnames.  As the
number of such server setups grow, the behavior of `-nh' may become the
default in the future.


File: wget.info,  Node: Domain Acceptance,  Next: All Hosts,  Prev: Host Checking,  Up: Following Links

Domain Acceptance
=================

   With the `-D' option you may specify the domains that will be
followed.  The hosts the domain of which is not in this list will not be
DNS-resolved.  Thus you can specify `-Dmit.edu' just to make sure that
*nothing outside of MIT gets looked up*.  This is very important and
useful.  It also means that `-D' does *not* imply `-H' (span all
hosts), which must be specified explicitly.  Feel free to use this
options since it will speed things up, with almost all the reliability
of checking for all hosts.  Thus you could invoke

     wget -r -D.hr http://fly.cc.fer.hr/

   to make sure that only the hosts in `.hr' domain get DNS-looked-up
for being equal to `fly.cc.fer.hr'.  So `fly.cc.etf.hr' will be checked
(only once!) and found equal, but `www.gnu.ai.mit.edu' will not even be
checked.

   Of course, domain acceptance can be used to limit the retrieval to
particular domains with spanning of hosts in them, but then you must
specify `-H' explicitly.  E.g.:

     wget -r -H -Dmit.edu,stanford.edu http://www.mit.edu/

   will start with `http://www.mit.edu/', following links across MIT
and Stanford.

   If there are domains you want to exclude specifically, you can do it
with `--exclude-domains', which accepts the same type of arguments of
`-D', but will *exclude* all the listed domains.  For example, if you
want to download all the hosts from `foo.edu' domain, with the
exception of `sunsite.foo.edu', you can do it like this:

     wget -rH -Dfoo.edu --exclude-domains sunsite.foo.edu http://www.foo.edu/


File: wget.info,  Node: All Hosts,  Next: Types of Files,  Prev: Domain Acceptance,  Up: Following Links

All Hosts
=========

   When `-H' is specified without `-D', all hosts are freely spanned.
There are no restrictions whatsoever as to what part of the net Wget
will go to fetch documents, other than maximum retrieval depth.  If a
page references `www.yahoo.com', so be it.  Such an option is rarely
useful for itself.


File: wget.info,  Node: Types of Files,  Next: Directory-Based Limits,  Prev: All Hosts,  Up: Following Links

Types of Files
==============

   When downloading material from the web, you will often want to
restrict the retrieval to only certain file types.  For example, if you
are interested in downloading GIFs, you will not be overjoyed to get
loads of PostScript documents, and vice versa.

   Wget offers two options to deal with this problem.  Each option
description lists a short name, a long name, and the equivalent command
in `.wgetrc'.

`-A ACCLIST'
`--accept ACCLIST'
`accept = ACCLIST'
     The argument to `--accept' option is a list of file suffixes or
     patterns that Wget will download during recursive retrieval.  A
     suffix is the ending part of a file, and consists of "normal"
     letters, e.g. `gif' or `.jpg'.  A matching pattern contains
     shell-like wildcards, e.g. `books*' or `zelazny*196[0-9]*'.

     So, specifying `wget -A gif,jpg' will make Wget download only the
     files ending with `gif' or `jpg', i.e. GIFs and JPEGs.  On the
     other hand, `wget -A "zelazny*196[0-9]*"' will download only files
     beginning with `zelazny' and containing numbers from 1960 to 1969
     anywhere within.  Look up the manual of your shell for a
     description of how pattern matching works.

     Of course, any number of suffixes and patterns can be combined
     into a comma-separated list, and given as an argument to `-A'.

`-R REJLIST'
`--reject REJLIST'
`reject = REJLIST'
     The `--reject' option works the same way as `--accept', only its
     logic is the reverse; Wget will download all files *except* the
     ones matching the suffixes (or patterns) in the list.

     So, if you want to download a whole page except for the cumbersome
     MPEGs and .AU files, you can use `wget -R mpg,mpeg,au'.
     Analogously, to download all files except the ones beginning with
     `bjork', use `wget -R "bjork*"'.  The quotes are to prevent
     expansion by the shell.

   The `-A' and `-R' options may be combined to achieve even better
fine-tuning of which files to retrieve.  E.g. `wget -A "*zelazny*" -R
.ps' will download all the files having `zelazny' as a part of their
name, but *not* the PostScript files.

   Note that these two options do not affect the downloading of HTML
files; Wget must load all the HTMLs to know where to go at
all--recursive retrieval would make no sense otherwise.


File: wget.info,  Node: Directory-Based Limits,  Next: FTP Links,  Prev: Types of Files,  Up: Following Links

Directory-Based Limits
======================

   Regardless of other link-following facilities, it is often useful to
place the restriction of what files to retrieve based on the directories
those files are placed in.  There can be many reasons for this--the
home pages may be organized in a reasonable directory structure; or some
directories may contain useless information, e.g. `/cgi-bin' or `/dev'
directories.

   Wget offers three different options to deal with this requirement.
Each option description lists a short name, a long name, and the
equivalent command in `.wgetrc'.

`-I LIST'
`--include LIST'
`include_directories = LIST'
     `-I' option accepts a comma-separated list of directories included
     in the retrieval.  Any other directories will simply be ignored.
     The directories are absolute paths.

     So, if you wish to download from `http://host/people/bozo/'
     following only links to bozo's colleagues in the `/people'
     directory and the bogus scripts in `/cgi-bin', you can specify:

          wget -I /people,/cgi-bin http://host/people/bozo/

`-X LIST'
`--exclude LIST'
`exclude_directories = LIST'
     `-X' option is exactly the reverse of `-I'--this is a list of
     directories *excluded* from the download.  E.g. if you do not want
     Wget to download things from `/cgi-bin' directory, specify `-X
     /cgi-bin' on the command line.

     The same as with `-A'/`-R', these two options can be combined to
     get a better fine-tuning of downloading subdirectories.  E.g. if
     you want to load all the files from `/pub' hierarchy except for
     `/pub/worthless', specify `-I/pub -X/pub/worthless'.

`-np'
`--no-parent'
`no_parent = on'
     The simplest, and often very useful way of limiting directories is
     disallowing retrieval of the links that refer to the hierarchy
     "above" than the beginning directory, i.e. disallowing ascent to
     the parent directory/directories.

     The `--no-parent' option (short `-np') is useful in this case.
     Using it guarantees that you will never leave the existing
     hierarchy.  Supposing you issue Wget with:

          wget -r --no-parent http://somehost/~luzer/my-archive/

     You may rest assured that none of the references to
     `/~his-girls-homepage/' or `/~luzer/all-my-mpegs/' will be
     followed.  Only the archive you are interested in will be
     downloaded.  Essentially, `--no-parent' is similar to
     `-I/~luzer/my-archive', only it handles redirections in a more
     intelligent fashion.


File: wget.info,  Node: FTP Links,  Prev: Directory-Based Limits,  Up: Following Links

Following FTP Links
===================

   The rules for FTP are somewhat specific, as it is necessary for them
to be.  FTP links in HTML documents are often included for purposes of
reference, and it is often inconvenient to download them by default.

   To have FTP links followed from HTML documents, you need to specify
the `--follow-ftp' option.  Having done that, FTP links will span hosts
regardless of `-H' setting.  This is logical, as FTP links rarely point
to the same host where the HTTP server resides.  For similar reasons,
the `-L' options has no effect on such downloads.  On the other hand,
domain acceptance (`-D') and suffix rules (`-A' and `-R') apply
normally.

   Also note that followed links to FTP directories will not be
retrieved recursively further.


File: wget.info,  Node: Time-Stamping,  Next: Startup File,  Prev: Following Links,  Up: Top

Time-Stamping
*************

   One of the most important aspects of mirroring information from the
Internet is updating your archives.

   Downloading the whole archive again and again, just to replace a few
changed files is expensive, both in terms of wasted bandwidth and money,
and the time to do the update.  This is why all the mirroring tools
offer the option of incremental updating.

   Such an updating mechanism means that the remote server is scanned in
search of "new" files.  Only those new files will be downloaded in the
place of the old ones.

   A file is considered new if one of these two conditions are met:

  1. A file of that name does not already exist locally.

  2. A file of that name does exist, but the remote file was modified
     more recently than the local file.

   To implement this, the program needs to be aware of the time of last
modification of both remote and local files.  Such information are
called the "time-stamps".

   The time-stamping in GNU Wget is turned on using `--timestamping'
(`-N') option, or through `timestamping = on' directive in `.wgetrc'.
With this option, for each file it intends to download, Wget will check
whether a local file of the same name exists.  If it does, and the
remote file is older, Wget will not download it.

   If the local file does not exist, or the sizes of the files do not
match, Wget will download the remote file no matter what the time-stamps
say.

* Menu:

* Time-Stamping Usage::
* HTTP Time-Stamping Internals::
* FTP Time-Stamping Internals::


File: wget.info,  Node: Time-Stamping Usage,  Next: HTTP Time-Stamping Internals,  Prev: Time-Stamping,  Up: Time-Stamping

Time-Stamping Usage
===================

   The usage of time-stamping is simple.  Say you would like to
download a file so that it keeps its date of modification.

     wget -S http://www.gnu.ai.mit.edu/

   A simple `ls -l' shows that the time stamp on the local file equals
the state of the `Last-Modified' header, as returned by the server.  As
you can see, the time-stamping info is preserved locally, even without
`-N'.

   Several days later, you would like Wget to check if the remote file
has changed, and download it if it has.

     wget -N http://www.gnu.ai.mit.edu/

   Wget will ask the server for the last-modified date.  If the local
file is newer, the remote file will not be re-fetched.  However, if the
remote file is more recent, Wget will proceed fetching it normally.

   The same goes for FTP.  For example:

     wget ftp://ftp.ifi.uio.no/pub/emacs/gnus/*

   `ls' will show that the timestamps are set according to the state on
the remote server.  Reissuing the command with `-N' will make Wget
re-fetch *only* the files that have been modified.

   In both HTTP and FTP retrieval Wget will time-stamp the local file
correctly (with or without `-N') if it gets the stamps, i.e. gets the
directory listing for FTP or the `Last-Modified' header for HTTP.

   If you wished to mirror the GNU archive every week, you would use the
following command every week:

     wget --timestamping -r ftp://prep.ai.mit.edu/pub/gnu/