moparisthebest
/
tmk_keyboard
mirror of https://github.com/moparisthebest/tmk_keyboard
1
0
Fork 0
Code Issues Releases Wiki Activity

added initial V-USB support for HHKB

This commit is contained in:
tmk 2011-05-16 00:08:06 +09:00
parent 61e12a3157
commit 068c31a7ba
7 changed files with 661 additions and 57 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

83
hhkb/Makefile.vusb Normal file
View File

@ -0,0 +1,83 @@
# Target file name (without extension).
TARGET = hhkb_vusb
# Directory common source filess exist
COMMON_DIR = ..
# Directory keyboard dependent files exist
TARGET_DIR = .
# keyboard dependent files
TARGET_SRC = main_vusb.c \
keymap.c \
matrix.c \
led.c
CONFIG_H = config_vusb.h
# V-USB debug level: To use ps2_usart.c level must be 0
# ps2_usart.c requires USART to receive PS/2 signal.
OPT_DEFS = -DDEBUG_LEVEL=0
# MCU name, you MUST set this to match the board you are using
# type "make clean" after changing this, so all files will be rebuilt
#MCU = at90usb162 # Teensy 1.0
#MCU = atmega32u4 # Teensy 2.0
#MCU = at90usb646 # Teensy++ 1.0
#MCU = at90usb1286 # Teensy++ 2.0
MCU = atmega168
# Processor frequency.
# Normally the first thing your program should do is set the clock prescaler,
# so your program will run at the correct speed. You should also set this
# variable to same clock speed. The _delay_ms() macro uses this, and many
# examples use this variable to calculate timings. Do not add a "UL" here.
F_CPU = 20000000
# Build Options
# comment out to disable the options.
#
MOUSEKEY_ENABLE = yes # Mouse keys
#USB_EXTRA_ENABLE = yes # Enhanced feature for Windows(Audio control and System control)
#USB_NKRO_ENABLE = yes # USB Nkey Rollover
#---------------- Programming Options --------------------------
AVRDUDE = avrdude
# Type: avrdude -c ? to get a full listing.
AVRDUDE_PROGRAMMER = usbasp
AVRDUDE_PORT =
AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
# Uncomment the following if you want avrdude's erase cycle counter.
# Note that this counter needs to be initialized first using -Yn,
# see avrdude manual.
#AVRDUDE_ERASE_COUNTER = -y
# Uncomment the following if you do /not/ wish a verification to be
# performed after programming the device.
#AVRDUDE_NO_VERIFY = -V
# Increase verbosity level. Please use this when submitting bug
# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
# to submit bug reports.
#AVRDUDE_VERBOSE = -v -v
#AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
AVRDUDE_FLAGS = -p $(MCU) -c $(AVRDUDE_PROGRAMMER)
AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
PROGRAM_CMD = $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
include $(COMMON_DIR)/Makefile.vusb
include $(COMMON_DIR)/Makefile.common

120
hhkb/config_vusb.h Normal file
View File

@ -0,0 +1,120 @@
#ifndef CONFIG_H
#define CONFIG_H
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0xC0FE
// TODO: share these strings with usbconfig.h
// Edit usbconfig.h to change these.
#define MANUFACTURER t.m.k.
#define PRODUCT HHKB mod
#define DESCRIPTION t.m.k. keyboard firmware for HHKB mod
/* matrix size */
#define MATRIX_ROWS 8
#define MATRIX_COLS 8
/* key combination for command */
#define IS_COMMAND() ( \
keyboard_report->mods == (BIT_LSHIFT | BIT_RSHIFT) || \
keyboard_report->mods == (BIT_LCTRL | BIT_RSHIFT) \
)
/* mouse keys */
#ifdef MOUSEKEY_ENABLE
# define MOUSEKEY_DELAY_TIME 255
#endif
/* PS/2 lines */
#ifdef PS2_MOUSE_ENABLE
#define PS2_CLOCK_PORT PORTD
#define PS2_CLOCK_PIN PIND
#define PS2_CLOCK_DDR DDRD
#define PS2_CLOCK_BIT 4
#define PS2_DATA_PORT PORTD
#define PS2_DATA_PIN PIND
#define PS2_DATA_DDR DDRD
#define PS2_DATA_BIT 0
// Synchronous USART is used to receive data from keyboard.
// Use RXD pin for PS/2 DATA line and XCK for PS/2 CLOCK.
// NOTE: This is recomended strongly if you use V-USB library.
#define PS2_USE_USART
// External or Pin Change Interrupt is used to receive data from keyboard.
// Use INT1 or PCINTxx for PS/2 CLOCK line. see below.
//#define PS2_USE_INT
#ifdef PS2_USE_USART
// synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling edge
// set DDR of CLOCK as input to be slave
#define PS2_USART_INIT() do { \
PS2_CLOCK_DDR &= ~(1<<PS2_CLOCK_BIT); \
PS2_DATA_DDR &= ~(1<<PS2_DATA_BIT); \
UCSR0C = ((1 << UMSEL00) | \
(3 << UPM00) | \
(0 << USBS0) | \
(3 << UCSZ00) | \
(0 << UCPOL0)); \
UCSR0A = 0; \
UBRR0H = 0; \
UBRR0L = 0; \
} while (0)
#define PS2_USART_RX_INT_ON() do { \
UCSR0B = ((1 << RXCIE0) | \
(1 << RXEN0)); \
} while (0)
#define PS2_USART_RX_POLL_ON() do { \
UCSR0B = (1 << RXEN0); \
} while (0)
#define PS2_USART_OFF() do { \
UCSR0C = 0; \
UCSR0B &= ~((1 << RXEN0) | \
(1 << TXEN0)); \
} while (0)
#define PS2_USART_RX_READY (UCSR0A & (1<<RXC0))
#define PS2_USART_RX_DATA UDR0
#define PS2_USART_ERROR (UCSR0A & ((1<<FE0) | (1<<DOR0) | (1<<UPE0)))
#define PS2_USART_RX_VECT USART_RX_vect
#endif
#ifdef PS2_USE_INT
/* INT1
#define PS2_INT_INIT() do { \
EICRA |= ((1<<ISC11) | \
(0<<ISC10)); \
} while (0)
#define PS2_INT_ON() do { \
EIMSK |= (1<<INT1); \
} while (0)
#define PS2_INT_OFF() do { \
EIMSK &= ~(1<<INT1); \
} while (0)
#define PS2_INT_VECT INT1_vect
*/
/* PCINT20 */
#define PS2_INT_INIT() do { \
PCICR |= (1<<PCIE2); \
} while (0)
#define PS2_INT_ON() do { \
PCMSK2 |= (1<<PCINT20); \
} while (0)
#define PS2_INT_OFF() do { \
PCMSK2 &= ~(1<<PCINT20); \
PCICR &= ~(1<<PCIE2); \
} while (0)
#define PS2_INT_VECT PCINT2_vect
#endif
#endif
#endif

30
hhkb/keymap.c
View File

@ -42,7 +42,7 @@ static const uint8_t PROGMEM fn_layer[] = {
2, // Fn2
3, // Fn3
4, // Fn4
5, // Fn5
0, // Fn5
0, // Fn6
0 // Fn7
};
@ -54,8 +54,8 @@ static const uint8_t PROGMEM fn_keycode[] = {
KB_NO, // Fn1
KB_SLSH, // Fn2
KB_SCLN, // Fn3
KB_RGUI, // Fn4
KB_SPC, // Fn5
KB_SPC, // Fn4
KB_NO, // Fn5
KB_NO, // Fn6
KB_NO // Fn7
};
@ -78,7 +78,7 @@ static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
KB_TAB, KB_Q, KB_W, KB_E, KB_R, KB_T, KB_Y, KB_U, KB_I, KB_O, KB_P, KB_LBRC,KB_RBRC,KB_BSPC, \
KB_LCTL,KB_A, KB_S, KB_D, KB_F, KB_G, KB_H, KB_J, KB_K, KB_L, KB_FN3, KB_QUOT,KB_ENT, \
KB_LSFT,KB_Z, KB_X, KB_C, KB_V, KB_B, KB_N, KB_M, KB_COMM,KB_DOT, KB_FN2, KB_RSFT,KB_FN1, \
KB_LGUI,KB_LALT,KB_FN5, KB_RALT,KB_FN4),
KB_LGUI,KB_LALT,KB_FN4, KB_RALT,KB_RGUI),
/* Layer 1: HHKB mode (HHKB Fn)
* ,-----------------------------------------------------------.
@ -155,27 +155,7 @@ static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
KB_BSPC,KB_P, KB_O, KB_I, KB_U, KB_Y, KB_T, KB_R, KB_E, KB_W, KB_Q, KB_NO, KB_NO, KB_TAB, \
KB_LCTL,KB_SCLN,KB_L, KB_K, KB_J, KB_H, KB_G, KB_F, KB_D, KB_S, KB_A, KB_RCTL,KB_RCTL, \
KB_LSFT,KB_SLSH,KB_DOT, KB_COMM,KB_M, KB_N, KB_B, KB_V, KB_C, KB_X, KB_Z, KB_RSFT,KB_NO, \
KB_LGUI,KB_LALT,KB_SPC, KB_RALT,KB_FN4),
/* Layer 5: Mouse mode
* ,-----------------------------------------------------------.
* |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del|
* |-----------------------------------------------------------|
* |Tab |MwL|MwU|McU|MwD|MwR|MwL|MwD|MwU|MwR| | | |Backs|
* |-----------------------------------------------------------|
* |Contro| |McL|McD|McR| |McL|McD|McU|McR|Mb1| |Return |
* |-----------------------------------------------------------|
* |Shift |Mb4|Mb5|Mb1|Mb2|Mb3|Mb2|Mb1|Mb4|Mb5| |Shift | |
* `-----------------------------------------------------------'
* |Gui |Alt |xxxxxxxxxxxxxxxxxxxxxxx|Alt |Gui|
* `--------------------------------------------'
* Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel
*/
KEYMAP(KB_ESC, KB_F1, KB_F2, KB_F3, KB_F4, KB_F5, KB_F6, KB_F7, KB_F8, KB_F9, KB_F10, KB_F11, KB_F12, KB_INS, KB_DEL, \
KB_TAB, KB_WH_L,KB_WH_U,KB_MS_U,KB_WH_D,KB_WH_R,KB_WH_L,KB_WH_D,KB_WH_U,KB_WH_R,KB_NO, KB_NO, KB_NO, KB_BSPC, \
KB_LCTL,KB_NO, KB_MS_L,KB_MS_D,KB_MS_R,KB_NO, KB_MS_L,KB_MS_D,KB_MS_U,KB_MS_R,KB_BTN1,KB_NO, KB_ENT, \
KB_LSFT,KB_BTN4,KB_BTN5,KB_BTN1,KB_BTN2,KB_BTN3,KB_BTN2,KB_BTN1,KB_BTN4,KB_BTN5,KB_NO, KB_RSFT,KB_NO, \
KB_LGUI,KB_LALT,KB_FN5, KB_RALT,KB_RGUI),
KB_LGUI,KB_LALT,KB_FN4, KB_RALT,KB_RGUI)
};

98
hhkb/matrix.c
View File

@ -4,6 +4,7 @@
#include <stdint.h>
#include <stdbool.h>
#include <avr/io.h>
#include <avr/interrupt.h>
#include <util/delay.h>
#include "print.h"
#include "util.h"
@ -31,29 +32,62 @@ static uint16_t _matrix0[MATRIX_ROWS];
static uint16_t _matrix1[MATRIX_ROWS];
#endif
// HHKB has no ghost and no bounce.
#ifdef MATRIX_HAS_GHOST
static bool matrix_has_ghost_in_row(uint8_t row);
#endif
// matrix is active low. (key on: 0/key off: 1)
// Matrix I/O ports
//
// HHKB has no ghost and no bounce.
// row: HC4051 select input channel(0-8)
// PB0, PB1, PB2(A, B, C)
// col: LS145 select low output line(0-8)
// PB3, PB4, PB5, PB6(A, B, C, D)
// use D as ENABLE: (enable: 0/unenable: 1)
// key: KEY: (on: 0/ off:1)
// KEY_PREV: (on: 1/ off: 0)
// PE6,PE7(KEY, KEY_PREV)
#define COL_ENABLE (1<<6)
#define KEY_SELELCT(ROW, COL) (PORTB = (PORTB&(1<<7))|COL_ENABLE|(((COL)&0x07)<<3)|((ROW)&0x07))
#define KEY_ENABLE (PORTB &= ~COL_ENABLE)
#define KEY_UNABLE (PORTB |= COL_ENABLE)
#define KEY_STATE (PINE&(1<<6))
#define KEY_PREV_ON (PORTE |= (1<<7))
#define KEY_PREV_OFF (PORTE &= ~(1<<7))
// row: HC4051[A,B,C] selects scan row0-7
// col: LS145[A,B,C,D] selects scan col0-7 and enable(D)
// key: on: 0/off: 1
// prev: unknown: output previous key state(negated)?
#ifdef HOST_PJRC
// Ports for Teensy
// row: PB0-2
// col: PB3-5,6
// key: PE6(pull-uped)
// prev: PE7
#define KEY_INIT() do { \
DDRB |= 0x7F; \
DDRE |= (1<<7); \
DDRE &= ~(1<<6); \
PORTE |= (1<<6); \
} while (0)
#define KEY_SELECT(ROW, COL) (PORTB = (PORTB & 0xC0) | \
(((COL) & 0x07)<<3) | \
((ROW) & 0x07))
#define KEY_ENABLE() (PORTB &= ~(1<<6))
#define KEY_UNABLE() (PORTB |= (1<<6))
#define KEY_STATE() (PINE & (1<<6))
#define KEY_PREV_ON() (PORTE |= (1<<7))
#define KEY_PREV_OFF() (PORTE &= ~(1<<7))
#else
// Ports for V-USB
// key: PB0(pull-uped)
// prev: PB1
// row: PB2-4
// col: PC0-2,3
#define KEY_INIT() do { \
DDRB |= 0x1E; \
DDRB &= ~(1<<0); \
PORTB |= (1<<0); \
DDRC |= 0x0F; \
} while (0)
#define KEY_SELECT(ROW, COL) do { \
PORTB = (PORTB & 0xE3) | ((ROW) & 0x07)<<2; \
PORTC = (PORTC & 0xF8) | ((COL) & 0x07); \
} while (0)
#define KEY_ENABLE() (PORTC &= ~(1<<3))
#define KEY_UNABLE() (PORTC |= (1<<3))
#define KEY_STATE() (PINB & (1<<0))
#define KEY_PREV_ON() (PORTB |= (1<<1))
#define KEY_PREV_OFF() (PORTB &= ~(1<<1))
#endif
inline
@ -70,13 +104,7 @@ uint8_t matrix_cols(void)
void matrix_init(void)
{
// row & col output(PB0-6)
DDRB = 0xFF;
KEY_SELELCT(0, 0);
// KEY: input with pullup(PE6)
// KEY_PREV: output(PE7)
DDRE = 0xBF;
PORTE = 0x40;
KEY_INIT();
// initialize matrix state: all keys off
for (uint8_t i=0; i < MATRIX_ROWS; i++) _matrix0[i] = 0x00;
@ -95,21 +123,31 @@ uint8_t matrix_scan(void)
for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
for (uint8_t col = 0; col < MATRIX_COLS; col++) {
KEY_SELELCT(row, col);
KEY_SELECT(row, col);
_delay_us(40); // from logic analyzer chart
if (matrix_prev[row] & (1<<col)) {
KEY_PREV_ON;
KEY_PREV_ON();
}
_delay_us(7); // from logic analyzer chart
KEY_ENABLE;
#if HOST_VUSB
// to avoid V-USB interrupt during read key state
uint8_t sreg = SREG;
cli();
#endif
KEY_ENABLE();
_delay_us(10); // from logic analyzer chart
if (KEY_STATE) {
if (KEY_STATE()) {
matrix[row] &= ~(1<<col);
} else {
matrix[row] |= (1<<col);
}
KEY_PREV_OFF;
KEY_UNABLE;
#if HOST_VUSB
SREG = sreg;
#endif
KEY_PREV_OFF();
KEY_UNABLE();
_delay_us(150); // from logic analyzer chart
}
}

378
hhkb/usbconfig.h Normal file
View File

@ -0,0 +1,378 @@
/* Name: usbconfig.h
* Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers
* Author: Christian Starkjohann
* Creation Date: 2005-04-01
* Tabsize: 4
* Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH
* License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt)
* This Revision: $Id: usbconfig-prototype.h 785 2010-05-30 17:57:07Z cs $
*/
#ifndef __usbconfig_h_included__
#define __usbconfig_h_included__
#include "config_vusb.h"
/*
General Description:
This file is an example configuration (with inline documentation) for the USB
driver. It configures V-USB for USB D+ connected to Port D bit 2 (which is
also hardware interrupt 0 on many devices) and USB D- to Port D bit 4. You may
wire the lines to any other port, as long as D+ is also wired to INT0 (or any
other hardware interrupt, as long as it is the highest level interrupt, see
section at the end of this file).
*/
/* ---------------------------- Hardware Config ---------------------------- */
#define USB_CFG_IOPORTNAME D
/* This is the port where the USB bus is connected. When you configure it to
* "B", the registers PORTB, PINB and DDRB will be used.
*/
#define USB_CFG_DMINUS_BIT 3
/* This is the bit number in USB_CFG_IOPORT where the USB D- line is connected.
* This may be any bit in the port.
*/
#define USB_CFG_DPLUS_BIT 2
/* This is the bit number in USB_CFG_IOPORT where the USB D+ line is connected.
* This may be any bit in the port. Please note that D+ must also be connected
* to interrupt pin INT0! [You can also use other interrupts, see section
* "Optional MCU Description" below, or you can connect D- to the interrupt, as
* it is required if you use the USB_COUNT_SOF feature. If you use D- for the
* interrupt, the USB interrupt will also be triggered at Start-Of-Frame
* markers every millisecond.]
*/
#define USB_CFG_CLOCK_KHZ (F_CPU/1000)
/* Clock rate of the AVR in kHz. Legal values are 12000, 12800, 15000, 16000,
* 16500, 18000 and 20000. The 12.8 MHz and 16.5 MHz versions of the code
* require no crystal, they tolerate +/- 1% deviation from the nominal
* frequency. All other rates require a precision of 2000 ppm and thus a
* crystal!
* Since F_CPU should be defined to your actual clock rate anyway, you should
* not need to modify this setting.
*/
#define USB_CFG_CHECK_CRC 0
/* Define this to 1 if you want that the driver checks integrity of incoming
* data packets (CRC checks). CRC checks cost quite a bit of code size and are
* currently only available for 18 MHz crystal clock. You must choose
* USB_CFG_CLOCK_KHZ = 18000 if you enable this option.
*/
/* ----------------------- Optional Hardware Config ------------------------ */
/* #define USB_CFG_PULLUP_IOPORTNAME D */
/* If you connect the 1.5k pullup resistor from D- to a port pin instead of
* V+, you can connect and disconnect the device from firmware by calling
* the macros usbDeviceConnect() and usbDeviceDisconnect() (see usbdrv.h).
* This constant defines the port on which the pullup resistor is connected.
*/
/* #define USB_CFG_PULLUP_BIT 4 */
/* This constant defines the bit number in USB_CFG_PULLUP_IOPORT (defined
* above) where the 1.5k pullup resistor is connected. See description
* above for details.
*/
/* --------------------------- Functional Range ---------------------------- */
#define USB_CFG_HAVE_INTRIN_ENDPOINT 1
/* Define this to 1 if you want to compile a version with two endpoints: The
* default control endpoint 0 and an interrupt-in endpoint (any other endpoint
* number).
*/
#define USB_CFG_HAVE_INTRIN_ENDPOINT3 1
/* Define this to 1 if you want to compile a version with three endpoints: The
* default control endpoint 0, an interrupt-in endpoint 3 (or the number
* configured below) and a catch-all default interrupt-in endpoint as above.
* You must also define USB_CFG_HAVE_INTRIN_ENDPOINT to 1 for this feature.
*/
#define USB_CFG_EP3_NUMBER 3
/* If the so-called endpoint 3 is used, it can now be configured to any other
* endpoint number (except 0) with this macro. Default if undefined is 3.
*/
/* #define USB_INITIAL_DATATOKEN USBPID_DATA1 */
/* The above macro defines the startup condition for data toggling on the
* interrupt/bulk endpoints 1 and 3. Defaults to USBPID_DATA1.
* Since the token is toggled BEFORE sending any data, the first packet is
* sent with the oposite value of this configuration!
*/
#define USB_CFG_IMPLEMENT_HALT 0
/* Define this to 1 if you also want to implement the ENDPOINT_HALT feature
* for endpoint 1 (interrupt endpoint). Although you may not need this feature,
* it is required by the standard. We have made it a config option because it
* bloats the code considerably.
*/
#define USB_CFG_SUPPRESS_INTR_CODE 0
/* Define this to 1 if you want to declare interrupt-in endpoints, but don't
* want to send any data over them. If this macro is defined to 1, functions
* usbSetInterrupt() and usbSetInterrupt3() are omitted. This is useful if
* you need the interrupt-in endpoints in order to comply to an interface
* (e.g. HID), but never want to send any data. This option saves a couple
* of bytes in flash memory and the transmit buffers in RAM.
*/
#define USB_CFG_INTR_POLL_INTERVAL 10
/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
* interval. The value is in milliseconds and must not be less than 10 ms for
* low speed devices.
*/
#define USB_CFG_IS_SELF_POWERED 0
/* Define this to 1 if the device has its own power supply. Set it to 0 if the
* device is powered from the USB bus.
*/
#define USB_CFG_MAX_BUS_POWER 100
/* Set this variable to the maximum USB bus power consumption of your device.
* The value is in milliamperes. [It will be divided by two since USB
* communicates power requirements in units of 2 mA.]
*/
#define USB_CFG_IMPLEMENT_FN_WRITE 1
/* Set this to 1 if you want usbFunctionWrite() to be called for control-out
* transfers. Set it to 0 if you don't need it and want to save a couple of
* bytes.
*/
#define USB_CFG_IMPLEMENT_FN_READ 0
/* Set this to 1 if you need to send control replies which are generated
* "on the fly" when usbFunctionRead() is called. If you only want to send
* data from a static buffer, set it to 0 and return the data from
* usbFunctionSetup(). This saves a couple of bytes.
*/
#define USB_CFG_IMPLEMENT_FN_WRITEOUT 0
/* Define this to 1 if you want to use interrupt-out (or bulk out) endpoints.
* You must implement the function usbFunctionWriteOut() which receives all
* interrupt/bulk data sent to any endpoint other than 0. The endpoint number
* can be found in 'usbRxToken'.
*/
#define USB_CFG_HAVE_FLOWCONTROL 0
/* Define this to 1 if you want flowcontrol over USB data. See the definition
* of the macros usbDisableAllRequests() and usbEnableAllRequests() in
* usbdrv.h.
*/
#define USB_CFG_DRIVER_FLASH_PAGE 0
/* If the device has more than 64 kBytes of flash, define this to the 64 k page
* where the driver's constants (descriptors) are located. Or in other words:
* Define this to 1 for boot loaders on the ATMega128.
*/
#define USB_CFG_LONG_TRANSFERS 0
/* Define this to 1 if you want to send/receive blocks of more than 254 bytes
* in a single control-in or control-out transfer. Note that the capability
* for long transfers increases the driver size.
*/
/* #define USB_RX_USER_HOOK(data, len) if(usbRxToken == (uchar)USBPID_SETUP) blinkLED(); */
/* This macro is a hook if you want to do unconventional things. If it is
* defined, it's inserted at the beginning of received message processing.
* If you eat the received message and don't want default processing to
* proceed, do a return after doing your things. One possible application
* (besides debugging) is to flash a status LED on each packet.
*/
/* #define USB_RESET_HOOK(resetStarts) if(!resetStarts){hadUsbReset();} */
/* This macro is a hook if you need to know when an USB RESET occurs. It has
* one parameter which distinguishes between the start of RESET state and its
* end.
*/
/* #define USB_SET_ADDRESS_HOOK() hadAddressAssigned(); */
/* This macro (if defined) is executed when a USB SET_ADDRESS request was
* received.
*/
#define USB_COUNT_SOF 0
/* define this macro to 1 if you need the global variable "usbSofCount" which
* counts SOF packets. This feature requires that the hardware interrupt is
* connected to D- instead of D+.
*/
/* #ifdef __ASSEMBLER__
* macro myAssemblerMacro
* in YL, TCNT0
* sts timer0Snapshot, YL
* endm
* #endif
* #define USB_SOF_HOOK myAssemblerMacro
* This macro (if defined) is executed in the assembler module when a
* Start Of Frame condition is detected. It is recommended to define it to
* the name of an assembler macro which is defined here as well so that more
* than one assembler instruction can be used. The macro may use the register
* YL and modify SREG. If it lasts longer than a couple of cycles, USB messages
* immediately after an SOF pulse may be lost and must be retried by the host.
* What can you do with this hook? Since the SOF signal occurs exactly every
* 1 ms (unless the host is in sleep mode), you can use it to tune OSCCAL in
* designs running on the internal RC oscillator.
* Please note that Start Of Frame detection works only if D- is wired to the
* interrupt, not D+. THIS IS DIFFERENT THAN MOST EXAMPLES!
*/
#define USB_CFG_CHECK_DATA_TOGGLING 0
/* define this macro to 1 if you want to filter out duplicate data packets
* sent by the host. Duplicates occur only as a consequence of communication
* errors, when the host does not receive an ACK. Please note that you need to
* implement the filtering yourself in usbFunctionWriteOut() and
* usbFunctionWrite(). Use the global usbCurrentDataToken and a static variable
* for each control- and out-endpoint to check for duplicate packets.
*/
#define USB_CFG_HAVE_MEASURE_FRAME_LENGTH 0
/* define this macro to 1 if you want the function usbMeasureFrameLength()
* compiled in. This function can be used to calibrate the AVR's RC oscillator.
*/
#define USB_USE_FAST_CRC 0
/* The assembler module has two implementations for the CRC algorithm. One is
* faster, the other is smaller. This CRC routine is only used for transmitted
* messages where timing is not critical. The faster routine needs 31 cycles
* per byte while the smaller one needs 61 to 69 cycles. The faster routine
* may be worth the 32 bytes bigger code size if you transmit lots of data and
* run the AVR close to its limit.
*/
/* -------------------------- Device Description --------------------------- */
#define USB_CFG_VENDOR_ID (VENDOR_ID & 0xFF), ((VENDOR_ID >> 8) & 0xFF)
/* USB vendor ID for the device, low byte first. If you have registered your
* own Vendor ID, define it here. Otherwise you may use one of obdev's free
* shared VID/PID pairs. Be sure to read USB-IDs-for-free.txt for rules!
* *** IMPORTANT NOTE ***
* This template uses obdev's shared VID/PID pair for Vendor Class devices
* with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand
* the implications!
*/
#define USB_CFG_DEVICE_ID (PRODUCT_ID & 0xFF), ((PRODUCT_ID >> 8) & 0xFF)
/* This is the ID of the product, low byte first. It is interpreted in the
* scope of the vendor ID. If you have registered your own VID with usb.org
* or if you have licensed a PID from somebody else, define it here. Otherwise
* you may use one of obdev's free shared VID/PID pairs. See the file
* USB-IDs-for-free.txt for details!
* *** IMPORTANT NOTE ***
* This template uses obdev's shared VID/PID pair for Vendor Class devices
* with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand
* the implications!
*/
#define USB_CFG_DEVICE_VERSION 0x00, 0x01
/* Version number of the device: Minor number first, then major number.
*/
#define USB_CFG_VENDOR_NAME 't', '.', 'm', '.', 'k', '.'
#define USB_CFG_VENDOR_NAME_LEN 6
/* These two values define the vendor name returned by the USB device. The name
* must be given as a list of characters under single quotes. The characters
* are interpreted as Unicode (UTF-16) entities.
* If you don't want a vendor name string, undefine these macros.
* ALWAYS define a vendor name containing your Internet domain name if you use
* obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
* details.
*/
#define USB_CFG_DEVICE_NAME 'H', 'H', 'K', 'B', ' ', 'm', 'o', 'd'
#define USB_CFG_DEVICE_NAME_LEN 8
/* Same as above for the device name. If you don't want a device name, undefine
* the macros. See the file USB-IDs-for-free.txt before you assign a name if
* you use a shared VID/PID.
*/
/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */
/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */
/* Same as above for the serial number. If you don't want a serial number,
* undefine the macros.
* It may be useful to provide the serial number through other means than at
* compile time. See the section about descriptor properties below for how
* to fine tune control over USB descriptors such as the string descriptor
* for the serial number.
*/
#define USB_CFG_DEVICE_CLASS 0
#define USB_CFG_DEVICE_SUBCLASS 0
/* See USB specification if you want to conform to an existing device class.
* Class 0xff is "vendor specific".
*/
#define USB_CFG_INTERFACE_CLASS 3 /* HID */
#define USB_CFG_INTERFACE_SUBCLASS 1 /* Boot */
#define USB_CFG_INTERFACE_PROTOCOL 1 /* Keyboard */
/* See USB specification if you want to conform to an existing device class or
* protocol. The following classes must be set at interface level:
* HID class is 3, no subclass and protocol required (but may be useful!)
* CDC class is 2, use subclass 2 and protocol 1 for ACM
*/
#define USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH 0
/* Define this to the length of the HID report descriptor, if you implement
* an HID device. Otherwise don't define it or define it to 0.
* If you use this define, you must add a PROGMEM character array named
* "usbHidReportDescriptor" to your code which contains the report descriptor.
* Don't forget to keep the array and this define in sync!
*/
/* #define USB_PUBLIC static */
/* Use the define above if you #include usbdrv.c instead of linking against it.
* This technique saves a couple of bytes in flash memory.
*/
/* ------------------- Fine Control over USB Descriptors ------------------- */
/* If you don't want to use the driver's default USB descriptors, you can
* provide our own. These can be provided as (1) fixed length static data in
* flash memory, (2) fixed length static data in RAM or (3) dynamically at
* runtime in the function usbFunctionDescriptor(). See usbdrv.h for more
* information about this function.
* Descriptor handling is configured through the descriptor's properties. If
* no properties are defined or if they are 0, the default descriptor is used.
* Possible properties are:
* + USB_PROP_IS_DYNAMIC: The data for the descriptor should be fetched
* at runtime via usbFunctionDescriptor(). If the usbMsgPtr mechanism is
* used, the data is in FLASH by default. Add property USB_PROP_IS_RAM if
* you want RAM pointers.
* + USB_PROP_IS_RAM: The data returned by usbFunctionDescriptor() or found
* in static memory is in RAM, not in flash memory.
* + USB_PROP_LENGTH(len): If the data is in static memory (RAM or flash),
* the driver must know the descriptor's length. The descriptor itself is
* found at the address of a well known identifier (see below).
* List of static descriptor names (must be declared PROGMEM if in flash):
* char usbDescriptorDevice[];
* char usbDescriptorConfiguration[];
* char usbDescriptorHidReport[];
* char usbDescriptorString0[];
* int usbDescriptorStringVendor[];
* int usbDescriptorStringDevice[];
* int usbDescriptorStringSerialNumber[];
* Other descriptors can't be provided statically, they must be provided
* dynamically at runtime.
*
* Descriptor properties are or-ed or added together, e.g.:
* #define USB_CFG_DESCR_PROPS_DEVICE (USB_PROP_IS_RAM | USB_PROP_LENGTH(18))
*
* The following descriptors are defined:
* USB_CFG_DESCR_PROPS_DEVICE
* USB_CFG_DESCR_PROPS_CONFIGURATION
* USB_CFG_DESCR_PROPS_STRINGS
* USB_CFG_DESCR_PROPS_STRING_0
* USB_CFG_DESCR_PROPS_STRING_VENDOR
* USB_CFG_DESCR_PROPS_STRING_PRODUCT
* USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER
* USB_CFG_DESCR_PROPS_HID
* USB_CFG_DESCR_PROPS_HID_REPORT
* USB_CFG_DESCR_PROPS_UNKNOWN (for all descriptors not handled by the driver)
*
* Note about string descriptors: String descriptors are not just strings, they
* are Unicode strings prefixed with a 2 byte header. Example:
* int serialNumberDescriptor[] = {
* USB_STRING_DESCRIPTOR_HEADER(6),
* 'S', 'e', 'r', 'i', 'a', 'l'
* };
*/
#define USB_CFG_DESCR_PROPS_DEVICE 0
#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_CONFIGURATION 0
#define USB_CFG_DESCR_PROPS_STRINGS 0
#define USB_CFG_DESCR_PROPS_STRING_0 0
#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0
#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0
#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0
//#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC
#define USB_CFG_DESCR_PROPS_HID 0
#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_HID_REPORT 0
#define USB_CFG_DESCR_PROPS_UNKNOWN 0
/* ----------------------- Optional MCU Description ------------------------ */
/* The following configurations have working defaults in usbdrv.h. You
* usually don't need to set them explicitly. Only if you want to run
* the driver on a device which is not yet supported or with a compiler
* which is not fully supported (such as IAR C) or if you use a differnt
* interrupt than INT0, you may have to define some of these.
*/
/* #define USB_INTR_CFG MCUCR */
/* #define USB_INTR_CFG_SET ((1 << ISC00) | (1 << ISC01)) */
/* #define USB_INTR_CFG_CLR 0 */
/* #define USB_INTR_ENABLE GIMSK */
/* #define USB_INTR_ENABLE_BIT INT0 */
/* #define USB_INTR_PENDING GIFR */
/* #define USB_INTR_PENDING_BIT INTF0 */
/* #define USB_INTR_VECTOR INT0_vect */
#endif /* __usbconfig_h_included__ */

5
ps2.c
View File

@ -227,8 +227,13 @@ uint8_t ps2_host_recv(void)
return pbuf_dequeue();
}
#if 0
#define DEBUGP_INIT() do { DDRC = 0xFF; } while (0)
#define DEBUGP(x) do { PORTC = x; } while (0)
#else
#define DEBUGP_INIT()
#define DEBUGP(x)
#endif
ISR(PS2_INT_VECT)
{
static enum {

4
vusb/host.c
View File

@ -163,8 +163,8 @@ usbRequest_t *rq = (void *)data;
if(rq->bRequest == USBRQ_HID_GET_REPORT){
debug(" GET_REPORT");
/* we only have one report type, so don't look at wValue */
usbMsgPtr = (void *)keyboard_report;
return sizeof(*keyboard_report);
usbMsgPtr = (void *)keyboard_report_prev;
return sizeof(*keyboard_report_prev);
}else if(rq->bRequest == USBRQ_HID_GET_IDLE){
debug(" GET_IDLE: ");
debug_hex(idleRate);