changed configuration file to accomodate SNI in a cleaner way

ChangeLog

@@ -5,6 +5,11 @@ vNEXT:
 	Added support for RFC4366 SNI 
 	(Travis Burtrum)
 
+	Changed configuration file format: 'probe' field is
+	no longer required, 'name' field can now contain
+	'sni' or 'regex', with corresponding options (see
+	example.org)
+
 v1.17: 	09MAR2015
 	Support RFC5952-style IPv6 addresses, e.g. [::]:443.
 

basic.cfg

@@ -19,11 +19,11 @@ listen:
 
 protocols:
 (
-     { name: "ssh"; service: "ssh"; host: "localhost"; port: "22"; probe: "builtin"; },
-     { name: "openvpn"; host: "localhost"; port: "1194"; probe: "builtin"; },
-     { name: "xmpp"; host: "localhost"; port: "5222"; probe: "builtin"; },
-     { name: "http"; host: "localhost"; port: "80"; probe: "builtin"; },
-     { name: "ssl"; host: "localhost"; port: "443"; probe: "builtin"; },
-     { name: "anyprot"; host: "localhost"; port: "443"; probe: "builtin"; }
+     { name: "ssh"; service: "ssh"; host: "localhost"; port: "22"; },
+     { name: "openvpn"; host: "localhost"; port: "1194"; },
+     { name: "xmpp"; host: "localhost"; port: "5222"; },
+     { name: "http"; host: "localhost"; port: "80"; },
+     { name: "ssl"; host: "localhost"; port: "443"; },
+     { name: "anyprot"; host: "localhost"; port: "443"; }
 );
 

example.cfg

@@ -23,31 +23,48 @@ listen:
 # List of protocols
 #
 # Each protocol entry consists of:
-#   name: name of the protocol
+#   name: name of the probe. These are listed on the command
+#   line (ssh -?), plus 'regex', 'sni' and 'timeout'.
+
 #   service: (optional) libwrap service name (see hosts_access(5))
-#   host: host name to connect that protocol
-#   port: port number to connect that protocol
-#   probe: "builtin" or a list of regular expressions
-#          (can be left out, e.g. to use with on-timeout)
+#   host, port: where to connect when this probe succeeds
+#
+#  Probe-specific options:
+#       sni: 
+#               sni_hotnames: list of FQDN for that target
+#       regex:
+#               regex_patterns: list of patterns to match for
+#               that target.
 #   
 # sslh will try each probe in order they are declared, and
 # connect to the first that matches.
+#
+# You can specify several of 'regex' and 'sni'.
  
 protocols:
 (
-     { name: "ssh"; service: "ssh"; host: "localhost"; port: "22"; probe: "builtin"; },
-     { name: "sni"; host: "localhost"; port: "993"; probe: "builtin"; sni_hostnames: [ "imap.example.org", "imap.example.com" ]; },
-     { name: "openvpn"; host: "localhost"; port: "1194"; probe: [ "^\x00[\x0D-\xFF]$", "^\x00[\x0D-\xFF]\x38" ]; },
-     { name: "xmpp"; host: "localhost"; port: "5222"; probe: [ "jabber" ]; },
-     { name: "http"; host: "localhost"; port: "80"; probe: "builtin"; },
-     { name: "ssl"; host: "localhost"; port: "443"; probe: [ "" ]; },
+     { name: "ssh"; service: "ssh"; host: "localhost"; port: "22"; },
+     { name: "http"; host: "localhost"; port: "80"; },
+
+     { name: "sni"; host: "localhost"; port: "993"; sni_hostnames: [ "mail.rutschle.net", "mail.englishintoulouse.com" ]; },
+     { name: "sni"; host: "localhost"; port: "xmpp-client"; sni_hostnames: [ "im.rutschle.net", "im.englishintoulouse.com" ]; },
+
+# OpenVPN
+     { name: "regex"; host: "localhost"; port: "1194"; regex_patterns: [ "^\x00[\x0D-\xFF]$", "^\x00[\x0D-\xFF]\x38" ]; },
+# Jabber
+     { name: "regex"; host: "localhost"; port: "5222"; regex_patterns: [ "jabber" ]; },
+
+# Catch-all
+     { name: "regex"; host: "localhost"; port: "443"; regex_patterns: [ "" ]; },
+
+# Where to connect in case of timeout (defaults to ssh)
      { name: "timeout"; service: "daytime"; host: "localhost"; port: "daytime"; }
 );
 
 # Optionally, specify to which protocol to connect in case
 # of timeout (defaults to "ssh").
-# You can timeout to any arbitrary address by setting a
-# protocol with no probe, as is the case with this example.
+# You can timeout to any arbitrary address by setting an
+# entry in 'protocols' named "timeout".
 # This enables you to set a tcpd service name for this
 # protocol too.
 on-timeout: "timeout";

probe.c

@@ -233,11 +233,13 @@ static int is_sni_protocol(const char *p, int len, struct proto *proto)
     /* Assume does not match */
     valid_tls = PROBE_NEXT;
 
-    for (sni_hostname = proto->data; *sni_hostname; sni_hostname++)
+    for (sni_hostname = proto->data; *sni_hostname; sni_hostname++) {
+        fprintf(stderr, "matching [%s] with [%s]\n", hostname, *sni_hostname);
         if(!strcmp(hostname, *sni_hostname)) {
             valid_tls = PROBE_MATCH;
             break;
         }
+    }
 
     free(hostname);
     return valid_tls;
@@ -365,6 +367,11 @@ T_PROBE* get_probe(const char* description) {
     if (!strcmp(description, "sni"))
         return is_sni_protocol;
 
+    /* Special case of "timeout" is allowed as a probe name in the
+     * configuration file even though it's not really a probe */
+    if (!strcmp(description, "timeout"))
+        return is_true;
+
     return NULL;
 }
 

sslh-main.c

@@ -249,7 +249,7 @@ static void setup_sni_hostnames(struct proto *p, config_setting_t* sni_hostnames
 #ifdef LIBCONFIG
 static int config_protocols(config_t *config, struct proto **prots)
 {
-    config_setting_t *setting, *prot, *probes, *sni_hostnames;
+    config_setting_t *setting, *prot, *patterns, *sni_hostnames;
     const char *hostname, *port, *name;
     int i, num_prots;
     struct proto *p, *prev = NULL;
@@ -273,31 +273,22 @@ static int config_protocols(config_t *config, struct proto **prots)
 
                 resolve_split_name(&(p->saddr), hostname, port);
 
-
-                probes = config_setting_get_member(prot, "probe");
-                if (probes) {
-                    if (config_setting_is_array(probes)) {
-                        /* If 'probe' is an array, setup a regex probe using the
-                         * array of strings as pattern */
-
-                        setup_regex_probe(p, probes);
-
-                    } else {
-                        /* if 'probe' is 'builtin', set the probe to the
-                         * appropriate builtin protocol */
-                        if (!strcmp(config_setting_get_string(probes), "builtin")) {
                 p->probe = get_probe(name);
                 if (!p->probe) {
-                                fprintf(stderr, "%s: no builtin probe for this protocol\n", name);
-                                exit(1);
-                            }
-                        } else {
-                            fprintf(stderr, "%s: illegal probe name\n", name);
+                    fprintf(stderr, "line %d: %s: probe unknown\n", config_setting_source_line(prot), name);
                     exit(1);
                 }
+
+                /* Probe-specific options: regex patterns */
+                if (!strcmp(name, "regex")) {
+                    patterns = config_setting_get_member(prot, "regex_patterns");
+                    if (patterns && config_setting_is_array(patterns)) {
+                        setup_regex_probe(p, patterns);
                     }
                 }
 
+                /* Probe-specific options: SNI hostnames */
+                if (!strcmp(name, "sni")) {
                     sni_hostnames = config_setting_get_member(prot, "sni_hostnames");
                     if (sni_hostnames && config_setting_is_array(sni_hostnames)) {
                         setup_sni_hostnames(p, sni_hostnames);
@@ -305,6 +296,7 @@ static int config_protocols(config_t *config, struct proto **prots)
                 }
             }
         }
+    }
 
     return 0;
 }

sslh.pod

@@ -51,14 +51,10 @@ and the list of protocols).
 
 The configuration file makes it possible to specify
 protocols using regular expressions: a list of regular
-expressions is given as the I<probe> parameter, and if the
+expressions is given as the I<regex_patterns> parameter, and if the
 first packet received from the client matches any of these
 expressions, B<sslh> connects to that protocol.
 
-Alternatively, the I<probe> parameter can be set to
-"builtin", to use the compiled probes which are much faster
-than regular expressions.
-
 =head2 Probing protocols
 
 When receiving an incoming connection, B<sslh> will read the