v1.11: 21APR2012

WARNING: defaults have been removed for --user and
	--pidfile options, update your start-up scripts!

	No longer stop sslh when reverse DNS requests fail
	for logging.

	Added HTTP probe.

	No longer create new session if running in
	foreground.

	No longer default to changing user to 'nobody'. If
	--user isn't specified, just run as current user.

	No longer create PID file by default, it should be
	explicitely set with --pidfile.

	No longer log to syslog if in foreground. Logs are
	instead output to stderr.

	The four changes above make it straightforward to
	integrate sslh with systemd, and should help with
	launchd.

ChangeLog

@@ -1,4 +1,29 @@
-v1.10:
+v1.11: 21APR2012
+	WARNING: defaults have been removed for --user and
+	--pidfile options, update your start-up scripts!
+
+	No longer stop sslh when reverse DNS requests fail
+	for logging.
+
+	Added HTTP probe.
+
+	No longer create new session if running in
+	foreground.
+
+	No longer default to changing user to 'nobody'. If
+	--user isn't specified, just run as current user.
+
+	No longer create PID file by default, it should be
+	explicitely set with --pidfile.
+
+	No longer log to syslog if in foreground. Logs are
+	instead output to stderr.
+
+	The four changes above make it straightforward to
+	integrate sslh with systemd, and should help with
+	launchd.
+
+v1.10: 27NOV2011
 	Fixed calls referring to sockaddr length so they work
 	with FreeBSD.
 

Makefile

@@ -1,6 +1,6 @@
 # Configuration
 
-VERSION="v1.10"
+VERSION="v1.11"
 USELIBWRAP=	# Use libwrap?
 COV_TEST= 	# Perform test coverage?
 PREFIX=/usr/local

README

@@ -1,10 +1,10 @@
 ===== sslh -- A ssl/ssh multiplexer. =====
 
-sslh accepts HTTPS, SSH, OpenVPN, tinc and XMPP connections
-on the same port. This makes it possible to connect to any
-of these servers on port 443 (e.g. from inside a corporate
-firewall, which almost never block port 443) while still
-serving HTTPS on that port. 
+sslh accepts HTTP, HTTPS, SSH, OpenVPN, tinc and XMPP
+connections on the same port. This makes it possible to
+connect to any of these servers on port 443 (e.g. from
+inside a corporate firewall, which almost never block port
+443) while still serving HTTPS on that port. 
 
 ==== Compile and install ====
 

common.c

@@ -35,6 +35,7 @@ int is_ssh_protocol(const char *p, int len);
 int is_openvpn_protocol(const char *p, int len);
 int is_tinc_protocol(const char *p, int len);
 int is_xmpp_protocol(const char *p, int len);
+int is_http_protocol(const char *p, int len);
 int is_true(const char *p, int len) { return 1; }
 
 /* Table of all the protocols we know how to connect to.
@@ -51,6 +52,7 @@ struct proto protocols[] = {
     { 0,         "openvpn",     NULL,   {0},   is_openvpn_protocol },
     { 0,         "tinc",        NULL,   {0},   is_tinc_protocol },
     { 0,         "xmpp",        NULL,   {0},   is_xmpp_protocol },
+    { 0,         "http",        NULL,   {0},   is_http_protocol },
     /* probe for SSL always successes: it's the default, and must be tried last
      **/
     { 0,        "ssl",          NULL,   {0},   is_true }
@@ -338,6 +340,32 @@ int is_xmpp_protocol( const char *p, int len)
     return strstr(p, "jabber") ? 1 : 0;
 }
 
+int probe_http_method(const char *p, const char *opt)
+{
+    return !strncmp(p, opt, strlen(opt)-1);
+}
+
+/* Is the buffer the beginnin of an HTTP connection?  */
+int is_http_protocol(const char *p, int len)
+{
+    /* If it's got HTTP in the request (HTTP/1.1) then it's HTTP */
+    if (strstr(p, "HTTP"))
+        return 1;
+
+    /* Otherwise it could be HTTP/1.0 without version: check if it's got an
+     * HTTP method (RFC2616 5.1.1) */
+    probe_http_method(p, "OPTIONS");
+    probe_http_method(p, "GET");
+    probe_http_method(p, "HEAD");
+    probe_http_method(p, "POST");
+    probe_http_method(p, "PUT");
+    probe_http_method(p, "DELETE");
+    probe_http_method(p, "TRACE");
+    probe_http_method(p, "CONNECT");
+
+    return 0;
+}
+
 
 /* 
  * Read the beginning of data coming from the client connection and check if
@@ -392,8 +420,18 @@ char* sprintaddr(char* buf, size_t size, struct addrinfo *a)
                numeric ? NI_NUMERICHOST | NI_NUMERICSERV : 0 );
 
    if (res) {
-      fprintf(stderr, "sprintaddr:getnameinfo: %s\n", gai_strerror(res));
-      exit(1);
+       log_message(LOG_ERR, "sprintaddr:getnameinfo: %s\n", gai_strerror(res));
+       /* Name resolution failed: do it numerically instead */
+       res = getnameinfo(a->ai_addr, a->ai_addrlen,
+                         host, sizeof(host), 
+                         serv, sizeof(serv), 
+                         NI_NUMERICHOST | NI_NUMERICSERV);
+       /* should not fail but... */
+       if (res) {
+           log_message(LOG_ERR, "sprintaddr:getnameinfo(NUM): %s\n", gai_strerror(res));
+           strcpy(host, "?");
+           strcpy(serv, "?");
+       }
    }
 
    snprintf(buf, size, "%s:%s", host, serv);
@@ -436,18 +474,16 @@ void resolve_name(struct addrinfo **out, char* fullname)
    }
 }
 
-/* Log to syslog, and to stderr if foreground */
+/* Log to syslog or stderr if foreground */
 void log_message(int type, char* msg, ...)
 {
     va_list ap;
 
-    va_start(ap, msg);
-    vsyslog(type, msg, ap);
-    va_end(ap);
-
     va_start(ap, msg);
     if (foreground)
         vfprintf(stderr, msg, ap);
+    else
+        vsyslog(type, msg, ap);
     va_end(ap);
 }
 

scripts/etc.default.sslh

@@ -1,3 +1,5 @@
 LISTEN=ifname:443
 SSH=localhost:22
 SSL=localhost:443
+USER=nobody
+PID=/var/run/sslh.pid

scripts/etc.init.d.sslh

@@ -13,11 +13,6 @@ facility=user.info
 
 # /etc/init.d/sslh: start and stop the sslh proxy daemon
 
-# Defaults -- can be overridden in /etc/default/sslh
-LISTEN=thelonious:443
-SSH=localhost:22
-SSL=localhost:443
-
 if test -f /etc/default/sslh; then
     . /etc/default/sslh
 fi
@@ -30,7 +25,7 @@ DAEMON=$PREFIX/sbin/sslh
 start()
 {
         echo "Start services: sslh"
-        $DAEMON --user nobody --listen ${LISTEN} --ssh ${SSH} --ssl ${SSL}
+        $DAEMON --user ${USER} --pidfile ${PID} --listen ${LISTEN} --ssh ${SSH} --ssl ${SSL}
         logger -t ${tag} -p ${facility} -i 'Started sslh'
 }
 

scripts/etc.rc.d.init.d.sslh.centos

@@ -20,7 +20,7 @@
 SSLH="/usr/local/sbin/sslh"
 PIDFILE="/var/run/sslh"
 
-OPTIONS="-p  0.0.0.0:8443 --ssl 127.0.0.1:443 --ssh 127.0.0.1:22"
+OPTIONS="--user nobody --pidfile $PIDFILE -p  0.0.0.0:8443 --ssl 127.0.0.1:443 --ssh 127.0.0.1:22"
 
 if [ -f /etc/sysconfig/sslh ]; then
         . /etc/sysconfig/sslh

sslh-fork.c

@@ -138,6 +138,7 @@ void main_loop(int listen_sockets[], int num_addr_listen)
     int in_socket, i, res;
     struct sigaction action;
 
+    listener_pid_number = num_addr_listen;
     listener_pid = malloc(listener_pid_number * sizeof(listener_pid[0]));
 
     /* Start one process for each listening address */
@@ -170,7 +171,6 @@ void main_loop(int listen_sockets[], int num_addr_listen)
     res = sigaction(SIGTERM, &action, NULL);
     CHECK_RES_DIE(res, "sigaction");
 
-    listener_pid_number = num_addr_listen;
     wait(NULL);
 }
 

sslh-main.c

@@ -154,8 +154,8 @@ int main(int argc, char *argv[])
    int *listen_sockets;
 
    /* Init defaults */
-   pid_file = "/var/run/sslh.pid";
-   user_name = "nobody";
+   pid_file = NULL;
+   user_name = NULL;
    foreground = 0;
 
    parse_cmdline(argc, argv);
@@ -172,19 +172,22 @@ int main(int argc, char *argv[])
 
    num_addr_listen = start_listen_sockets(&listen_sockets, addr_listen);
 
-   if (!foreground)
+   if (!foreground) {
        if (fork() > 0) exit(0); /* Detach */
 
-   setup_signals();
-
-   drop_privileges(user_name);
-
        /* New session -- become group leader */
        if (getuid() == 0) {
            res = setsid();
            CHECK_RES_DIE(res, "setsid: already process leader");
        }
+   }
 
+   setup_signals();
+
+   if (user_name)
+       drop_privileges(user_name);
+
+   if (pid_file)
        write_pid_file(pid_file);
 
    /* Open syslog connection */

sslh.pod

@@ -6,15 +6,15 @@
 
 =head1 SYNOPSIS
 
-sslh [ B<-t> I<num> ] [B<-p> I<listening address> [B<-p> I<listening address> ...] [B<--ssl> I<target address for SSL>] [B<--ssh> I<target address for SSH>] [B<--openvpn> I<target address for OpenVPN>] [B<-u> I<username>] [B<-P> I<pidfile>] [-v] [-i] [-V] [-f] [-n]
+sslh [ B<-t> I<num> ] [B<-p> I<listening address> [B<-p> I<listening address> ...] [B<--ssl> I<target address for SSL>] [B<--ssh> I<target address for SSH>] [B<--openvpn> I<target address for OpenVPN>] [B<--http> I<target address for HTTP>] [B<-u> I<username>] [B<-P> I<pidfile>] [-v] [-i] [-V] [-f] [-n]
 
 =head1 DESCRIPTION
 
-B<sslh> accepts HTTPS, SSH, OpenVPN, tinc and XMPP connections
-on the same port. This makes it possible to connect to any
-of these servers on port 443 (e.g. from inside a corporate
-firewall, which almost never block port 443) while still
-serving HTTPS on that port. 
+B<sslh> accepts HTTP, HTTPS, SSH, OpenVPN, tinc and XMPP
+connections on the same port. This makes it possible to
+connect to any of these servers on port 443 (e.g. from
+inside a corporate firewall, which almost never block port
+443) while still serving HTTPS on that port. 
 
 
 The idea is to have B<sslh> listen to the external 443 port,
@@ -123,14 +123,12 @@ Prints B<sslh> version.
 
 =item B<-u> I<username>, B<--user> I<username>
 
-Requires to run under the specified username. Defaults to
-I<nobody> (which is not perfect -- ideally B<sslh> should
-run under its own UID).
+Requires to run under the specified username. 
 
 =item B<-P> I<pidfile>, B<--pid-file> I<pidfile>
 
-Specifies the file in which to write the PID of the main
-server. Defaults to I</var/run/sslh.pid>.
+Specifies a file in which to write the PID of the main
+server.
 
 =item B<-i>, B<--inetd>