moparisthebest/spdylay
1
0
Fork 0
mirror of https://github.com/moparisthebest/spdylay synced 2024-11-11 20:15:04 -05:00
Code Issues Releases Wiki Activity
22516aea63
spdylay/doc/python.rst
Tatsuhiro Tsujikawa c1b130acd0 python: Don't raise exception from Session.resume_data() 
In practice, Session.resume_data() will be used without checking there
is deferred data or not. Actually, there is no API to check this.  So
it is better not to raise exception. Instead return False to notify
error. If the method succeeds, it returns True.
2012-09-10 22:10:54 +09:00

1078 lines
35 KiB
ReStructuredText
Raw Blame History

Python-spdylay - Spdylay Python Extension Module
================================================
.. py:module:: spdylay
Python-spdylay is the Python extension module of Spdylay SPDY C
library.
Build
-----
To generate C source code from ``spdylay.pyx``, run ``cython``::
$ cython spdylay.pyx
To build extension, run ``setup.py``::
$ python setup.py build_ext
Session Objects
---------------
.. py:class:: Session(side, version, config=None, send_cb=None, recv_cb=None, on_ctrl_recv_cb=None, on_invalid_ctrl_recv_cb=None, on_data_chunk_recv_cb=None, on_data_recv_cb=None, before_ctrl_send_cb=None, on_ctrl_send_cb=None, on_ctrl_not_send_cb=None, on_data_send_cb=None, on_stream_close_cb=None, on_request_recv_cb=None, on_ctrl_recv_parse_error_cb=None, on_unknown_ctrl_recv_cb=None, user_data=None)
This is the class to hold the resources needed for a SPDY session.
Sending and receiving SPDY frames are done using the methods of
this class.
The *side* specifies server or client. Use one of the following:
.. py:data:: CLIENT
Indicates client.
.. py:data:: SERVER
Indicates server.
The *version* specifies SPDY protocol version. Use of the following:
.. py:data:: PROTO_SPDY2
Indicates SPDY/2.
.. py:data:: PROTO_SPDY3
Indicates SPDY/3.
The *user_data* specifies opaque object tied to this object. It
can be accessed through :py:attr:`user_data` attribute.
The *recv_cb* specifies callback function (callable) invoked when
the object wants to receive data from the remote peer. The
signature of this callback is:
.. py:function:: recv_cb(session, length)
The *session* is the :py:class:`Session` object invoking the
callback. The implementation of this function must read at
most *length* bytes of bytestring and return it. If it cannot
read any single byte without blocking, it must return empty
bytestring or ``None``. If it gets EOF before it reads any
single byte, it must raise :py:class:`EOFError`. For other
errors, it must raise :py:class:`CallbackFailureError`.
The *send_cb* specifies callback function (callable) invoked when
session wants to send data to the remote peer. The signature of
this callback is:
.. py:function:: send_cb(session, data)
The *session* is the :py:class:`Session` object invoking the
callback. The *data* is the bytestring to send. The
implementation of this function will send all or part of
*data*. It must return the number of bytes sent if it
succeeds. If it cannot send any single byte without blocking,
it must return 0 or ``None``. For other errors, it must return
:py:class:`CallbackFailureError`.
The *on_ctrl_recv_cb* specifies callback function (callable)
invoked when a control frame is received.
.. py:function:: on_ctrl_recv_cb(session, frame)
The *session* is the :py:class:`Session` object invoking the
callback. The *frame* is the received control
frame. ``frame.frame_type`` tells the type of frame. See
`Frame Types`_ for the details. Once the frame type is
identified, access attribute of the *frame* to get
information.
The *on_invalid_ctrl_recv_cb* specifies callback function
(callable) invoked when an invalid control frame is received.
.. py:function:: on_invalid_ctrl_recv_cb(session, frame, status_code)
The *session* is the :py:class:`Session` object invoking the
callback. The *frame* is the received control
frame. ``frame.frame_type`` tells the type of frame. See
`Frame Types`_ for the details. Once the frame type is
identified, access attribute of the *frame* to get
information. The *status_code* is one of the `Stream Status
Codes`_ and indicates the error. When this callback function
is invoked, either RST_STREAM or GOAWAY will be sent.
The *on_data_chunk_recv_cb* specifies callback function (callable)
invoked when a chunk of data in DATA frame is received.
.. py:function:: on_data_chunk_recv_cb(session, flags, stream_id, data)
The *session* is the :py:class:`Session` object invoking the
callback. The *stream_id* is the stream ID this DATA frame
belongs to. The *flags* is the flags of DATA frame which this
data chunk is contained. ``(flags & DATA_FLAG_FIN) != 0`` does
not necessarily mean this chunk of data is the last one in the
stream. You should use :py:func:`on_data_recv_cb` to know all
data frames are received. The *data* is the bytestring of
received data.
The *on_data_recv_cb* specifies callback function (callable)
invoked when DATA frame is received.
.. py:function:: on_data_recv_cb(session, flags, stream_id, length)
The actual data it contains are received by
:py:func:`on_data_chunk_recv_cb()`.
The *before_ctrl_send_cb* specifies callback function (callable)
invoked before the control frame is sent.
.. py:function:: before_ctrl_send_cb(session, frame)
The *session* is the :py:class:`Session` object invoking the
callback. The *frame* is the control frame to be
sent. ``frame.frame_type`` tells the type of frame. See `Frame
Types`_ for the details. Once the frame type is identified,
access attribute of the *frame* to get information.
The *on_ctrl_send_cb* specifies callback function (callable)
invoked after the control frame is sent.
.. py:function:: on_ctrl_send_cb(session, frame)
The *session* is the :py:class:`Session` object invoking the
callback. The *frame* is the control frame to be
sent. ``frame.frame_type`` tells the type of frame. See `Frame
Types`_ for the details. Once the frame type is identified,
access attribute of the *frame* to get information.
The *on_ctrl_not_send_cb* specifies callback function (callable)
after the control frame is not sent because of the error.
.. py:function:: on_ctrl_not_send_cb(session, frame, error_code)
The *session* is the :py:class:`Session` object invoking the
callback. The *frame* is the received control
frame. ``frame.frame_type`` tells the type of frame. See
`Frame Types`_ for the details. Once the frame type is
identified, access attribute of the *frame* to get
information. The *error_code* is one of the `Error Codes`_
and indicates the error.
The *on_data_send_cb* specifies callback function (callable)
invoked after DATA frame is sent.
.. py:function:: on_data_send_cb(session, flags, stream_id, length)
The *on_stream_close_cb* specifies callback function (callable)
invoked when the stream is closed.
.. py:function:: on_stream_close_cb(session, stream_id, status_code)
The *session* is the :py:class:`Session` object invoking the
callback. The *stream_id* indicates the stream ID. The reason
of closure is indicated by the *status_code*. See `Stream
Status Codes`_ for the details. The stream_user_data, which
was specified in :py:meth:`submit_request()` or
:py:meth:`submit_syn_stream()`, is still available in this
function.
The *on_request_recv_cb* specifies callback function (callable)
invoked when the request from the remote peer is received. In
other words, the frame with FIN flag set is received. In HTTP,
this means HTTP request, including request body, is fully
received.
.. py:function:: on_request_recv_cb(session, stream_id)
The *session* is the :py:class:`Session` object invoking the
callback. The *stream_id* indicates the stream ID.
The *on_ctrl_recv_parse_error_cb* specifies callback function
(callable) invoked when the received control frame octets could
not be parsed correctly.
.. py:function:: on_ctrl_recv_parse_error_cb(session, type, head, payload, error_code)
The *type* indicates the type of received control frame. The
*head* is the bytestring of control frame header. The
*payload* is the bytestring of data portion of the received
frame. The *error_code* is one of the error code defined in
`Error Codes`_ and indicates the error.
The *on_unknown_ctrl_recv_cb* specifies callback function
(callable) invoked when the received control frame type is
unknown.
.. py:function:: on_unknown_ctrl_recv_cb(session, head, payload)
The *head* is the bytestring of control frame header. The
*payload* is the bytestring of data portion of the received
frame.
The :py:class:`InvalidArgumentError` will be raised if the given
argument is invalid. The :py:class:`UnsupportedVersionError` will
be raised if the *version* is not supported. The
:py:class:`ZlibError` will be raised if initialization of zlib
failed.
.. py:attribute:: Session.user_data
The object passed in the constructor as *user_data* argument.
This attribute is read-only.
.. py:method:: Session.send()
Sends pending frames to the remote peer. This method retrieves
the highest prioritized frame from the outbound queue and sends it
to the remote peer. It does this as many as possible until the
user callback :py:func:`send_cb` returns 0 or ``None`` or the
outbound queue becomes empty. This method calls several callback
functions which are passed when initializing the session. See
:func:`spdylay_session_send` about the callback functions invoked
from this method.
The :py:class:`CallbackFailureError` will be raised if the
callback function failed.
.. py:method:: Session.recv(data=None)
Receives frames from the remote peer. This method receives as
many frames as possible until the user callback :py:func:`recv_cb`
returns empty bytestring or ``None``. This function calls several
callback functions which are passed when initializing the session.
See :func:`spdylay_session_recv` about the callback functions
invoked from this method. If data is ``None``, this method will
invoke :py:func:`recv_cb` callback function to receive incoming
data. If data is not ``None``, it must be a bytestring and this
method uses it as the incoming data and does not call
:py:func:`recv_cb` callback function.
The :py:class:`EOFError` will be raised if the remote peer did
shutdown on the connection. The :py:class:`CallbackFailureError`
will be raised if the callback function failed.
.. py:method:: Session.resume_data(stream_id)
Puts back previously deferred DATA frame in the stream *stream_id*
to the outbound queue.
This method returns ``True`` if it succeeds, or ``False``. This
method will fail if the stream does not exist or no deferred data
exist.
.. py:method:: Session.want_read()
Returns ``True`` if session wants to receive data from the
remote peer.
If both :py:meth:`want_read()` and :py:meth:`want_write()` return
``False``, the application should drop the connection.
.. py:method:: Session.want_write()
Returns ``True`` if session wants to send data to the remote peer.
If both :py:meth:`want_read()` and :py:meth:`want_write()` return
``False``, the application should drop the connection.
.. py:method:: Session.get_stream_user_data(stream_id)
Returns stream_user_data for the stream *stream_id*. The
stream_user_data is provided by :py:meth:`submit_request()` or
:py:meth:`submit_syn_stream()`. If the stream is initiated by the
remote endpoint, stream_user_data is always ``None``. If the
stream is initiated by the local endpoint and ``None`` is given in
:py:meth:`submit_request()` or :py:meth:`submit_syn_stream()`,
then this function returns ``None``. If the stream does not exist,
this function returns ``None``.
.. py:method:: Session.get_outbound_queue_size()
Returns the number of frames in the outbound queue. This does not
include the deferred DATA frames.
.. py:method:: Session.get_pri_lowest()
Returns lowest priority value for the session.
.. py:method:: Session.fail_session(status_code)
Submits GOAWAY frame. The status code *status_code* is ignored if
the protocol version is :py:const:`PROTO_SPDY2`.
This method should be called when the connection should be
terminated after sending GOAWAY. If the remaining streams should
be processed after GOAWAY, use :py:meth:`submit_goaway()` instead.
.. py:method:: Session.submit_request(pri, nv, data_prd=None, stream_user_data=None)
Submits SYN_STREAM frame and optionally one or more DATA frames.
The *pri* is priority of this request. ``0`` is the highest
priority value. Use :py:meth:`get_pri_lowest()` to know the lowest
priority value for this session.
The *nv* is a list containing the name/value pairs. The each
element is a pair of unicode strings: name and value (e.g.,
``(u'host', u'localhost')``).
The *nv* must include following name/value pairs:
``:method``
HTTP method (e.g., ``GET``, ``POST``, ``HEAD``, etc)
``:scheme``
URI scheme (e.g., ``https``)
``:path``
Absolute path and parameters of this request (e.g., ``/foo``,
``/foo;bar;haz?h=j&y=123``)
``:version``
HTTP version (e.g., ``HTTP/1.1``)
``:host``
The hostport portion of the URI for this request (e.g.,
``example.org:443``). This is the same as the HTTP “Host”
header field.
If the session is initialized with the version
:py:const:`PROTO_SPDY2`, the above names are translated to
``method``, ``scheme``, ``url``, ``version`` and ``host``
respectively.
The names in *nv* will be lower-cased when they are sent.
If *data_prd* is not ``None``, it provides data which will be sent
in subsequent DATA frames. In this case, a method that allows
request message bodies
(http://www.w3.org/Protocols/rfc2616/rfc2616-sec9.html#sec9) must
be specified with ``:method`` key in nv (e.g. ``POST``). The type
of *data_prd* is expected to be :py:class:`DataProvider`. If
*data_prd* is ``None``, SYN_STREAM have FLAG_FIN set.
.. note::
This method does not increase reference count of *data_prd*,
so the application must hold the reference to it until the
stream is closed.
The *stream_user_data* is data associated to the stream opened by
this request and can be an arbitrary object, which can be
retrieved later by :py:meth:`get_stream_user_data()`.
Since the library reorders the frames and tries to send the
highest prioritized one first and the SPDY specification requires
the stream ID must be strictly increasing, the stream ID of this
request cannot be known until it is about to sent. To know the
stream ID of the request, the application can use
:py:func:`before_ctrl_send_cb`. This callback is called just
before the frame is sent. For SYN_STREAM frame, the argument frame
has the stream ID assigned. Also since the stream is already
opened, :py:meth:`get_stream_user_data()` can be used to get
stream_user_data to identify which SYN_STREAM we are processing.
The :py:class:`InvalidArgumentError` will be raised if the *pri*
is invalid; or the *nv* includes empty name or ``None`` value.
.. py:method:: Session.submit_response(stream_id, nv, data_prd=None)
Submits SYN_REPLY frame and optionally one or more DATA frames
against the stream *stream_id*.
The *nv* is a list containing the name/value pairs. The each
element is a pair of unicode strings: name and value (e.g.,
``(u'host', u'localhost')``).
The *nv* must include following name/value pairs:
``:status``
HTTP status code (e.g., ``200`` or ``200 OK``)
``:version``
HTTP response version (e.g., ``HTTP/1.1``)
If the session is initialized with the version
:py:const:`PROTO_SPDY2`, the above names are translated to
``status`` and ``version`` respectively.
The names in *nv* will be lower-cased when they are sent.
If *data_prd* is not ``None``, it provides data which will be sent
in subsequent DATA frames. The type of *data_prd* is expected to
be :py:class:`DataProvider`. If *data_prd* is ``None``, SYN_REPLY
have FLAG_FIN set.
.. note::
This method does not increase reference count of *data_prd*,
so the application must hold the reference to it until the
stream is closed.
The :py:class:`InvalidArgumentError` will be raised if the *nv*
includes empty name or ``None`` value.
.. py:method:: Session.submit_syn_stream(flags, pri, nv, assoc_stream_id=0, stream_user_data=None)
Submits SYN_STREAM frame. The *flags* is bitwise OR of the
following values:
* :py:const:`CTRL_FLAG_FIN`
* :py:const:`CTRL_FLAG_UNIDIRECTIONAL`
If *flags* includes :py:const:`CTRL_FLAG_FIN`, this frame has
FLAG_FIN flag set.
The *assoc_stream_id* is used for server-push. Specify 0 if this
stream is not server-push. If session is initialized for client
use, *assoc_stream_id* is ignored.
The *pri* is priority of this request. ``0`` is the highest
priority value. Use :py:meth:`get_pri_lowest()` to know the lowest
priority value for this session.
The *nv* is a list containing the name/value pairs. The each
element is a pair of unicode strings: name and value (e.g.,
``(u'host', u'localhost')``).
The names in *nv* will be lower-cased when they are sent.
The *stream_user_data* is data associated to the stream opened by
this request and can be an arbitrary object, which can be
retrieved later by :py:meth:`get_stream_user_data()`.
This function is low-level in a sense that the application code
can specify flags and the Associated-To-Stream-ID directly. For
usual HTTP request, :py:meth:`submit_request()` is useful.
The :py:class:`InvalidArgumentError` will be raised if the *pri*
is invalid; or the *assoc_stream_id* is invalid; or the *nv*
includes empty name or ``None`` value.
.. py:method:: Session.submit_syn_reply(flags, stream_id, nv)
Submits SYN_REPLY frame. The *flags* is bitwise OR of the
following values:
* :py:const:`CTRL_FLAG_FIN`
If *flags* includes :py:const:`CTRL_FLAG_FIN`, this frame has
FLAG_FIN flag set.
The stream which this frame belongs to is given in the
*stream_id*. The *nv* is the name/value pairs in this frame.
The *nv* is a list containing the name/value pairs. The each
element is a pair of unicode strings: name and value (e.g.,
``(u'host', u'localhost')``).
The names in *nv* will be lower-cased when they are sent.
The :py:class:`InvalidArgumentError` will be raised if the *nv*
includes empty name or ``None`` value.
.. py:method:: Session.submit_headers(flags, stream_id, nv)
Submits HEADERS frame. The *flags* is bitwise OR of the following
values:
* :py:const:`CTRL_FLAG_FIN`
If *flags* includes :py:const:`CTRL_FLAG_FIN`, this frame has
FLAG_FIN flag set.
The stream which this frame belongs to is given in the
*stream_id*. The *nv* is the name/value pairs in this frame.
The *nv* is a list containing the name/value pairs. The each
element is a pair of unicode strings: name and value (e.g.,
``(u'host', u'localhost')``).
The names in *nv* will be lower-cased when they are sent.
The :py:class:`InvalidArgumentError` will be raised if the *nv*
includes empty name or ``None`` value.
.. py:method:: Session.submit_data(stream_id, flags, data_prd)
Submits one or more DATA frames to the stream *stream_id*. The
data to be sent are provided by *data_prd*. The type of
*data_prd* is expected to be :py:class:`DataProvider`. If *flags*
contains :py:const:`DATA_FLAG_FIN`, the last DATA frame has
FLAG_FIN set.
.. note::
This method does not increase reference count of *data_prd*,
so the application must hold the reference to it until the
stream is closed.
.. py:method:: Session.submit_rst_stream(stream_id, status_code)
Submits RST_STREAM frame to cancel/reject the stream *stream_id*
with the status code *status_code*. See `Stream Status Codes`_ for
available status codes.
.. py:method:: Session.submit_ping()
Submits PING frame.
.. py:method:: Session.submit_goaway(status_code)
Submits GOAWAY frame. The status code *status_code* is ignored if
the protocol version is :py:const:`PROTO_SPDY2`. See `GOAWAY
Status Codes`_ for available status codes.
.. py:method:: Session.submit_settings(flags, iv)
Stores local settings and submits SETTINGS frame. The *flags* is
bitwise OR of the values described in `SETTINGS Frame Flags`_.
The *iv* is a list of tuple ``(settings_id, flag, value)``. For
settings_id, see `SETTINGS IDs`_. For flag, see `SETTINGS ID
Flags`_.
The :py:class:`InvalidArgumentError` will be raised if the *iv*
contains duplicate settings ID or invalid value.
.. py:method:: Session.submit_window_update(stream_id, delta_window_size)
Submits WINDOW_UPDATE frame. The effective range of the
*delta_window_size* is ``[1, (1 << 31)-1]``, inclusive. But the
application must be responsible to keep the resulting window
``size <= (1 << 31)-1``.
The :py:class:`InvalidArgumentError` will be raised if the
*delta_window_size* is 0 or negative. The
:py:class:`StreamClosedError` will be raised if the stream is
already closed or does not exist.
Helper Functions
----------------
.. py:function:: get_npn_protocols()
Returns SPDY version strings which can be directly passed to
``ssl.SSLContext.set_npn_protocols()``. Please note that the
returned list only includes SPDY version strings this library
supports. If the application intends to support other fallback
protocols (e.g., ``http/1.1``), the application should add them to
the returned list.
.. py:function:: npn_get_version(proto)
Returns SPDY version which spdylay library supports from the given
protocol name. The *proto* is the unicode string to the protocol
name. Currently, ``spdy/2`` and ``spdy/3`` are supported. The
returned nonzero SPDY version can be passed as the version
argument in :py:class:`Session` constructor.
This function returns nonzero SPDY version if it succeeds, or 0.
Data Provider Objects
---------------------
.. py:class:: DataProvider(source, read_cb)
This class represents the data source and the way to read a chunk
of data from it. The *source* is expected to be the data source to
read, but the application can freely pass any object including
``None``. The *read_cb* is the callback function invoked when the
library needs to read data. The data read will be sent as DATA
frame.
.. py:function:: read_cb(session, stream_id, length, read_ctrl, source)
The *session* is the :py:class:`Session` object. The
*stream_id* is the stream to send data. The *source* is the
object passed as a *source* in DataProvider constructor. The
implementation of this callback must read at most *length*
bytes of data and return it as bytestring. When all data is
read, assign :py:const:`READ_EOF` to ``read_ctrl.flags``. If
the application wants to postpone DATA frames, (e.g.,
asynchronous I/O, or reading data blocks for long time), it is
achieved by returning :py:const:`ERR_DEFERRED` without reading
any data in this invocation. The library removes DATA frame
from the outgoing queue temporarily. To move back deferred
DATA frame to outgoing queue, call
:py:meth:`Session.resume_data()`. In case of error, there are
2 choices. Raising :py:class:`TemporalCallbackFailureError`
will close the stream by issuing RST_STREAM with
:py:const:`INTERNAL_ERROR`. Raising
:py:class:`CallbackFailureError` will signal the entire
session failure.
.. py:attribute:: DataProvider.source
.. py:attribute:: DataProvider.read_cb
Control Frame Objects
---------------------
.. py:class:: CtrlFrame
The base class of SPDY control frames.
.. py:attribute:: version
Version
.. py:attribute:: frame_type
Frame type. See `Frame Types`_.
.. py:attribute:: flags
Flags. See `Control Frame Flags`_.
.. py:attribute:: length
Frame payload length
The following frame classes inherit :py:class:`CtrlFrame` class.
.. py:class:: SynStreamFrame
.. py:attribute:: stream_id
Stream ID
.. py:attribute:: assoc_stream_id
Associated-To-Stream-ID
.. py:attribute:: pri
Priority
.. py:attribute:: slot
Credential slot
.. py:attribute:: nv
List of name/value pair.
.. py:class:: SynReplyFrame
.. py:attribute:: stream_id
Stream ID
.. py:attribute:: nv
List of name/value pair.
.. py:class:: HeadersFrame
.. py:attribute:: stream_id
Stream ID
.. py:attribute:: nv
List of name/value pair.
.. py:class:: RstStreamFrame
.. py:attribute:: stream_id
Stream ID
.. py:attribute:: status_code
Status code
.. py:class:: SettingsFrame
.. py:attribute:: iv
List of tuple ``(settings_id, flags, value)``
.. py:class:: PingFrame
.. py:attribute:: unique_id
Unique ID
.. py:class:: GoawayFrame
.. py:attribute:: last_good_stream_id
Last good stream ID
.. py:attribute:: status_code
Status code
.. py:class:: WindowUpdateFrame
.. py:attribute:: stream_id
Stream ID
.. py:attribute:: delta_window_size
Delta window size
Exceptions
----------
.. py:class:: EOFError
.. py:class:: CallbackFailureError
.. py:class:: TemporalCallbackFailureError
.. py:class:: InvalidArgumentError
.. py:class:: ZlibError
.. py:class:: UnsupportedVersionError
.. py:class:: StreamClosedError
Read Callback Flags
-------------------
.. py:data:: READ_EOF
Error Codes
-----------
.. py:data:: ERR_INVALID_ARGUMENT
.. py:data:: ERR_ZLIB
.. py:data:: ERR_UNSUPPORTED_VERSION
.. py:data:: ERR_WOULDBLOCK
.. py:data:: ERR_PROTO
.. py:data:: ERR_INVALID_FRAME
.. py:data:: ERR_EOF
.. py:data:: ERR_DEFERRED
.. py:data:: ERR_STREAM_ID_NOT_AVAILABLE
.. py:data:: ERR_STREAM_CLOSED
.. py:data:: ERR_STREAM_CLOSING
.. py:data:: ERR_STREAM_SHUT_WR
.. py:data:: ERR_INVALID_STREAM_ID
.. py:data:: ERR_INVALID_STREAM_STATE
.. py:data:: ERR_DEFERRED_DATA_EXIST
.. py:data:: ERR_SYN_STREAM_NOT_ALLOWED
.. py:data:: ERR_GOAWAY_ALREADY_SENT
.. py:data:: ERR_INVALID_HEADER_BLOCK
.. py:data:: ERR_INVALID_STATE
.. py:data:: ERR_GZIP
.. py:data:: ERR_TEMPORAL_CALLBACK_FAILURE
Following error codes indicate fatal error.
.. py:data:: ERR_FATAL
.. py:data:: ERR_NOMEM
.. py:data:: ERR_CALLBACK_FAILURE
Frame Types
-----------
.. py:data:: SYN_STREAM
.. py:data:: SYN_REPLY
.. py:data:: RST_STREAM
.. py:data:: SETTINGS
.. py:data:: NOOP
Note that this was deprecated in SPDY/3.
.. py:data:: PING
.. py:data:: GOAWAY
.. py:data:: HEADERS
.. py:data:: WINDOW_UPDATE
This first appeared in SPDY/3.
.. py:data:: CREDENTIAL
This first appeared in SPDY/3.
Control Frame Flags
-------------------
.. py:data:: CTRL_FLAG_NONE
Indicates no flags set.
.. py:data:: CTRL_FLAG_FIN
.. py:data:: CTRL_FLAG_UNIDIRECTIONAL
Stream Status Codes
-------------------
.. py:data:: OK
This is not a valid status code for RST_STREAM. Don't use this in
:py:meth:`Session.submit_rst_stream()`.
.. py:data:: PROTOCOL_ERROR
.. py:data:: INVALID_STREAM
.. py:data:: REFUSED_STREAM
.. py:data:: UNSUPPORTED_VERSION
.. py:data:: CANCEL
.. py:data:: INTERNAL_ERROR
.. py:data:: FLOW_CONTROL_ERROR
Following status codes were introduced in SPDY/3.
.. py:data:: STREAM_IN_USE
.. py:data:: STREAM_ALREADY_CLOSED
.. py:data:: INVALID_CREDENTIALS
.. py:data:: FRAME_TOO_LARGE
GOAWAY Status Codes
-------------------
.. py:data:: GOAWAY_OK
.. py:data:: GOAWAY_PROTOCOL_ERROR
.. py:data:: GOAWAY_INTERNAL_ERROR
SETTINGS Frame Flags
--------------------
.. py:data:: FLAG_SETTINGS_NONE
.. py:data:: FLAG_SETTINGS_CLEAR_SETTINGS
SETTINGS IDs
------------
.. py:data:: SETTINGS_UPLOAD_BANDWIDTH
.. py:data:: SETTINGS_DOWNLOAD_BANDWIDTH
.. py:data:: SETTINGS_ROUND_TRIP_TIME
.. py:data:: SETTINGS_MAX_CONCURRENT_STREAMS
.. py:data:: SETTINGS_CURRENT_CWND
.. py:data:: SETTINGS_DOWNLOAD_RETRANS_RATE
.. py:data:: SETTINGS_INITIAL_WINDOW_SIZE
.. py:data:: SETTINGS_CLIENT_CERTIFICATE_VECTOR_SIZE
.. py:data:: SETTINGS_MAX
SETTINGS ID Flags
-----------------
.. py:data:: ID_FLAG_SETTINGS_NONE
.. py:data:: ID_FLAG_SETTINGS_PERSIST_VALUE
.. py:data:: ID_FLAG_SETTINGS_PERSISTED
Simple SPDY Client
------------------
This module offers a simple SPDY client implementation. The function
:py:func:`urlfetch()` fetches given URLs. For each URL,
*StreamHandlerClass* is instantiated and its methods are called when
certain event occurs. The *StreamHandlerClass* must be a subclass of
:py:class:`BaseSPDYStreamHandler`.
.. py:function:: urlfetch(url_or_urls, StreamHandlerClass)
Opens URL and handles the response from the servers.
The *url_or_urls* is either one URL string or list of URL string.
For each URL, *StreamHandlerClass* is instantiated and it handles
the request to and response from the server. If successive URLs in
*url_or_urls* list have same origin, they are processed in one
SPDY session.
.. py:class:: BaseSPDYStreamHandler(url, fetcher)
This class handles one URL retrieval, which corresponds one SPDY
stream. The *url* is the URL to fetch. The *fetcher* is a driver
object to call methods of this object. For now it is opaque
object. This class is intended to be subclassed by the application
to add specific behavior.
``BaseSPDYStreamHandler`` has the following instance variables:
.. py:attribute:: url
The URL for this stream.
.. py:attribute:: stream_id
The stream ID for this stream.
``BaseSPDYStreamHandler`` has the following methods:
.. py:method:: on_header(nv)
Called when name/value pairs (headers) *nv* is received. This
method may be overridden by subclasses. The default
implementation does nothing.
.. py:method:: on_data(data)
Called when *data* is received. This method may be overridden
by subclass. The default implementation does nothing.
.. py:method:: on_close(status_code)
Called when this stream is closed. The *status_code* indicates
the reason of the closure. See `Stream Status Codes`_. This
method may be overridden by subclass. The default
implementation does nothing.
The example follows:
.. literalinclude:: ../python/spdyclient.py
:language: python
Simple SPDY Server
------------------
This module offers a simple SPDY server implementation to ready for
use with little additional code.
The :py:class:`ThreadedSPDYServer` is a ``socketserver.TCPServer``
subclass. As the name of the class suggests, it is multi threaded.
It only supports SPDY connection and does not fallback to HTTP/1.1.
Since it uses TLS NPN extension, Python 3.3.0 or later is required.
.. py:class:: ThreadedSPDYServer(server_address, RequestHandlerCalss, cert_file, key_file)
This class builds on ``TCPServer`` class by passing
*server_address* and *RequestHandlerCalss*. The request is handled
by the instance of *RequestHandlerCalss*.
The :py:class:`ThreadedSPDYServer` requires a *RequestHandlerCalss* on
instantiation, which must be a subclass of
:py:class:`BaseSPDYRequestHandler`.
Most texts are copied (and modified) from ``http.server``
documentation.
.. py:class:: BaseSPDYRequestHandler(request, client_address, server)
This class is used to handle the SPDY requests (streams) that
arrive at the server. By itself, it cannot respond to any actual
SPDY requests; it must be subclassed to handle each request method
(e.g. ``GET`` or ``POST``). ``BaseSPDYRequestHandler`` provides a
number of class and instance variables, and methods for use by
subclasses.
The handler will gather headers (name/value pairs in SPDY terms)
and read POST data (if any), then call a method specific to the
request type. The method name is constructed from the request. For
example, for the request method ``SPAM``, the ``do_SPAM()`` method
will be called with no arguments. All of the relevant information
is stored in instance variables of the handler. Subclasses should
not need to override or extend the ``__init__()`` method.
.. note::
Currently, this implementation accepts request body only if
method is POST and the request body will be stored in memory.
``BaseSPDYRequestHandler`` has the following instance variables:
.. py:attribute:: client_address
Contains a tuple of the form ``(host, port)`` referring to the
client's address.
.. py:attribute:: server
Contains the server instance.
.. py:attribute:: command
Contains the command (request type, method). For example,
``GET``.
.. py:attribute:: path
Contains the request path.
.. py:attribute:: request_version
Contains the version string from the request. For example,
``HTTP/1.1``.
.. py:attribute:: headers
Contains the request headers. Each name/value pair is a tuple
of the form ``(name, value)``.
.. py:attribute:: rfile
Contains an input stream, positioned at the start of the
optional input data. If there is no optional input data, it
may be ``None``.
.. py:attribute:: wfile
Contains the output stream for writing a response back to the
client.
``BaseSPDYRequestHandler`` has the following class variables:
.. py:attribute:: server_version
Specifies the server software version.
.. py:attribute:: sys_version
Contains the Python system version.
A ``BaseSPDYRequestHandler`` instance has the following methods:
.. py:method:: handle()
Interacts client exchanging SPDY frames. When a request is
completely received, it calls appropriate ``do_*()`` method.
This method will handle multiple requests (streams) until SPDY
session is over.
.. py:method:: send_error(code, message=None)
Send a complete error reply to the client The numeric *code*
specifies the HTTP error code, with *message* as optional,
more specific text. A complete set of headers is sent,
followed by HTML text.
.. py:method:: send_response(code, message=None)
Adds a response code and, optionally, short message.
This will be formatted as ':status' response header field.
.. py:method:: send_header(keyword, value)
Adds the HTTP header. The *keyword* and *value* must be
unicode strings and not ``None``.
The example of ``BaseSPDYRequestHandler`` and ``ThreadedSPDYServer``
follows:
.. literalinclude:: ../python/spdyserv.py
:language: python
Reference in New Issue View Git Blame Copy Permalink