Spdylay - SPDY C Library ======================== This is an experimental implementation of Google's SPDY protocol in C. This library provides SPDY version 2 and 3 framing layer implementation. It does not perform any I/O operations. When the library needs them, it calls the callback functions provided by the application. It also does not include any event polling mechanism, so the application can freely choose the way of handling events. This library code does not depend on any particular SSL library (except for example programs which depend on OpenSSL 1.0.1 or later). Development Status ------------------ Most of the SPDY/2 and SPDY/3 functionality has been implemented. In both versions, the direct support of server-push has not been available yet. The application can achieve server-push using primitive APIs though. As described below, we can create SPDY client and server with the current Spdylay API. Requirements ------------ The following packages are needed to build the library: * pkg-config >= 0.20 * zlib >= 1.2.3 To build and run the unit test programs, the following packages are needed: * cunit >= 2.1 To build and run the example programs, the following packages are needed: * OpenSSL >= 1.0.1 To enable ``-a`` option (getting linked assets from the downloaded resouce) in ``spdycat`` (one of the example program), the following packages are needed: * libxml2 >= 2.7.7 To build SPDY/HTTPS to HTTP reverse proxy ``shrpx`` (one of the example program), the following packages are needed: * libevent-openssl >= 2.0.8 If you are using Ubuntu 12.04, you need the following packages installed: * autoconf * automake * autotools-dev * libtool * pkg-config * zlib1g-dev * libcunit1-dev * libssl-dev * libxml2-dev * libevent-dev Build from git -------------- Building from git is easy, but please be sure that at least autoconf 2.68 is used:: $ autoreconf -i $ automake $ autoconf $ ./configure $ make Building documentation ---------------------- To build documentation, run:: $ make html The documents will be generated under ``doc/manual/html/``. The generated documents will not be installed with ``make install``. API --- The public API reference is available on online. Visit http://spdylay.sourceforge.net/. All public APIs are in *spdylay/spdylay.h*. All public API functions as well as the callback function typedefs are documented. Examples -------- *examples* directory contains SPDY client and server implementation using Spdylay. These programs are intended to make sure that Spdylay API is acutally usable for real implementation and also for debugging purposes. Please note that OpenSSL with `NPN `_ support is required in order to build and run these programs. At the time of this writing, the OpenSSL 1.0.1 supports NPN. Spdycat - SPDY client +++++++++++++++++++++ The SPDY client is called ``spdycat``. It is a dead simple downloader like wget/curl. It connects to SPDY server and gets resources given in the command-line:: $ examples/spdycat -h Usage: spdycat [-Oansv23] [-t ] [-w ] [--cert=] [--key=] ... OPTIONS: -v, --verbose Print debug information such as reception/ transmission of frames and name/value pairs. -n, --null-out Discard downloaded data. -O, --remote-name Save download data in the current directory. The filename is dereived from URI. If URI ends with '/', 'index.html' is used as a filename. Not implemented yet. -2, --spdy2 Only use SPDY/2. -3, --spdy3 Only use SPDY/3. -t, --timeout= Timeout each request after seconds. -w, --window-bits= Sets the initial window size to 2**. -a, --get-assets Download assets such as stylesheets, images and script files linked from the downloaded resource. Only links whose origins are the same with the linking resource will be downloaded. -s, --stat Print statistics. --cert= Use the specified client certificate file. The file must be in PEM format. --key= Use the client private key file. The file must be in PEM format. $ examples/spdycat -nv https://www.google.com/ [ 0.025] NPN select next protocol: the remote server offers: * spdy/3 * spdy/2 * http/1.1 NPN selected the protocol: spdy/3 [ 0.035] recv SETTINGS frame (niv=2) [4(1):100] [7(0):12288] [ 0.035] send SYN_STREAM frame (stream_id=1, assoc_stream_id=0, pri=3) :host: www.google.com :method: GET :path: / :scheme: https :version: HTTP/1.1 accept: */* user-agent: spdylay/0.2.0 [ 0.077] recv SYN_REPLY frame (stream_id=1) :status: 302 Found :version: HTTP/1.1 cache-control: private content-length: 222 content-type: text/html; charset=UTF-8 date: Sun, 13 May 2012 08:02:54 GMT location: https://www.google.co.jp/ server: gws x-frame-options: SAMEORIGIN x-xss-protection: 1; mode=block [ 0.077] recv DATA frame (stream_id=1, flags=1, length=222) [ 0.077] send GOAWAY frame (last_good_stream_id=0) Spdyd - SPDY server +++++++++++++++++++ SPDY server is called ``spdyd`` and serves static files. It is single threaded and multiplexes connections using non-blocking socket. The static files are read using blocking I/O system call, read(2). It speaks SPDY/2 and SPDY/3:: $ examples/spdyd --htdocs=/your/htdocs/ -v 3000 server.key server.crt IPv4: listen on port 3000 IPv6: listen on port 3000 The negotiated next protocol: spdy/3 [id=1] [ 17.456] send SETTINGS frame (niv=1) [4(0):100] [id=1] [ 17.457] recv SYN_STREAM frame (stream_id=1, assoc_stream_id=0, pri=3) :host: localhost:3000 :method: GET :path: /README :scheme: https :version: HTTP/1.1 accept: */* user-agent: spdylay/0.2.0 [id=1] [ 17.457] send SYN_REPLY frame (stream_id=1) :status: 200 OK :version: HTTP/1.1 cache-control: max-age=3600 content-length: 15 date: Sun, 13 May 2012 08:06:12 GMT last-modified: Tue, 17 Jan 2012 15:39:01 GMT server: spdyd spdylay/0.2.0 [id=1] [ 17.467] send DATA frame (stream_id=1, flags=0, length=15) [id=1] [ 17.467] send DATA frame (stream_id=1, flags=1, length=0) [id=1] [ 17.468] stream_id=1 closed [id=1] [ 17.468] recv GOAWAY frame (last_good_stream_id=0) [id=1] [ 17.468] closed Currently, ``spdyd`` needs ``epoll`` or ``kqueue``. Shrpx - A reverse proxy for SPDY/HTTPS ++++++++++++++++++++++++++++++++++++++ The ``shrpx`` is a multi-threaded reverse proxy for SPDY/HTTPS. It converts SPDY/HTTPS traffic to plain HTTP. It can be used as SSL/SPDY proxy with the http proxy (e.g., Squid) in the backend. To enable SSL/SPDY proxy mode, use ``--spdy-proxy`` option. It also supports configuration file. See ``--conf`` option and sample configuration file ``shrpx.conf.sample``. Here is the command-line options:: $ examples/shrpx -h Usage: shrpx [-Dhs] [-b ] [-f ] [-n ] [-c ] [-L ] [OPTIONS...] A reverse proxy for SPDY/HTTPS. OPTIONS: -b, --backend= Set backend host and port. Default: '127.0.0.1,80' -f, --frontend= Set frontend host and port. Default: '0.0.0.0,3000' -n, --workers= Set the number of worker threads. Default: 1 -c, --spdy-max-concurrent-streams= Set the maximum number of the concurrent streams in one SPDY session. Default: 100 -L, --log-level= Set the severity level of log output. INFO, WARNING, ERROR and FATAL. Default: WARNING -D, --daemon Run in a background. If -D is used, the current working directory is changed to '/'. -s, --spdy-proxy SSL/SPDY proxy mode. --add-x-forwarded-for Append X-Forwarded-For header field to the downstream request. --frontend-spdy-read-timeout= Specify read timeout for SPDY frontend connection. Default: 180 --frontend-read-timeout= Specify read timeout for non-SPDY frontend connection. Default: 180 --frontend-write-timeout= Specify write timeout for both SPDY and non-SPDY frontends. connection. Default: 60 --backend-read-timeout= Specify read timeout for backend connection. Default: 900 --backend-write-timeout= Specify write timeout for backend connection. Default: 60 --backend-keep-alive-timeout= Specify keep-alive timeout for backend connection. Default: 60 --accesslog Print simple accesslog to stderr. --frontend-spdy-window-bits= Sets the initial window size of SPDY frontend connection to 2**. Default: 16 --pid-file= Set path to save PID of this program. --user= Run this program as USER. This option is intended to be used to drop root privileges. --conf= Load configuration from PATH. Default: /etc/shrpx/shrpx.conf --syslog Send log messages to syslog. --syslog-facility= Set syslog facility. Default: daemon --backlog= Set listen backlog size. Default: 256 -h, --help Print this help. For those of you who are curious, ``shrpx`` is an abbreviation of "Spdy/https to Http Reverse ProXy". Without ``-s`` option, it works in the following configuration:: client <-- SPDY, HTTPS --> Shrpx <-- HTTP --> Web Server With ``-s`` option, it works in the following configuration:: client <-- SPDY, HTTPS --> Shrpx <-- HTTP --> Proxy server (e.g., Squid) * client is configured to use Shrpx as SSL/SPDY proxy. At the time of this writing, Chrome is the only browser which supports SSL/SPDY proxy. The one way to configure Chrome to use SSL/SPDY proxy is create proxy.pac script like this:: function FindProxyForURL(url, host) { return "HTTPS SERVERADDR:PORT"; } ``SERVERADDR`` and ``PORT`` is the hostname/address and port of the machine shrpx is running. Please note that Chrome requires valid certificate for SSL/PROXY. Then run chrome with the following arguments:: $ google-chrome --proxy-pac-url=file:///path/to/proxy.pac --use-npn Other examples ++++++++++++++ There is another SPDY server called ``spdynative``, which is `node.native `_ style simple SPDY server:: #include #include "spdy.h" int main() { spdy server; if(!server.listen("localhost", 8080, "server.key", "server.crt", [](request& req, response& res) { res.set_status(200); res.set_header("content-type", "text/plain"); res.end("C++ FTW\n"); })) return EXIT_FAILURE; std::cout << "Server running at http://localhost:8080/" << std::endl; return reactor::run(server); } Don't expect much from ``spdynative``. It is just an example and does not support asynchronous I/O at all. If you are looking for the example program written in C, see ``spdycli`` which is the simple SPDY client.