spdylay/README.rst

Spdylay - SPDY C Library
========================

This is an experimental implementation of Google's SPDY protocol in C.

This library provides SPDY version 2 and 3 framing layer
implementation.  It does not perform any I/O operations.  When the
library needs them, it calls the callback functions provided by the
application. It also does not include any event polling mechanism, so
the application can freely choose the way of handling events. This
library code does not depend on any particular SSL library (except for
example programs which depend on OpenSSL 1.0.1 or later).

This project also develops SPDY client, server and proxy on top of
Spdylay library. See `SPDY Client and Server Programs`_ section.

Development Status
------------------

Most of the SPDY/2 and SPDY/3 functionality has been implemented.  In
both versions, the direct support of server-push has not been
available yet.  The application can achieve server-push using
primitive APIs though.

As described below, we can create SPDY client and server with the
current Spdylay API.

Requirements
------------

The following packages are needed to build the library:

* pkg-config >= 0.20
* zlib >= 1.2.3

To build and run the unit test programs, the following packages are
needed:

* cunit >= 2.1

To build and run the example programs, the following packages are
needed:

* OpenSSL >= 1.0.1

To enable ``-a`` option (getting linked assets from the downloaded
resouce) in ``spdycat`` (one of the example program), the following
packages are needed:

* libxml2 >= 2.7.7

To build SPDY/HTTPS to HTTP reverse proxy ``shrpx`` (one of the
example program), the following packages are needed:

* libevent-openssl >= 2.0.8

If you are using Ubuntu 12.04, you need the following packages
installed:

* autoconf
* automake
* autotools-dev
* libtool
* pkg-config
* zlib1g-dev
* libcunit1-dev
* libssl-dev
* libxml2-dev
* libevent-dev

Build from git
--------------

Building from git is easy, but please be sure that at least autoconf 2.68 is
used::

    $ autoreconf -i
    $ automake
    $ autoconf
    $ ./configure
    $ make

Building documentation
----------------------

To build documentation, run::

    $ make html

The documents will be generated under ``doc/manual/html/``.

The generated documents will not be installed with ``make install``.

API
---

The public API reference is available on online. Visit
http://spdylay.sourceforge.net/.  All public APIs are in
*spdylay/spdylay.h*. All public API functions as well as the callback
function typedefs are documented.

SPDY Client and Server Programs
-------------------------------

The *src* directory contains SPDY client and server implementations
using Spdylay library. These programs are intended to make sure that
Spdylay API is acutally usable for real implementation and also for
debugging purposes. Please note that OpenSSL with `NPN
<http://technotes.googlecode.com/git/nextprotoneg.html>`_ support is
required in order to build and run these programs.  At the time of
this writing, the OpenSSL 1.0.1 supports NPN.

Spdycat - SPDY client
+++++++++++++++++++++

The SPDY client is called ``spdycat``. It is a dead simple downloader
like wget/curl. It connects to SPDY server and gets resources given in
the command-line::

    $ src/spdycat -h
    Usage: spdycat [-Oansv23] [-t <SECONDS>] [-w <WINDOW_BITS>] [--cert=<CERT>]
                   [--key=<KEY>] <URI>...

    OPTIONS:
        -v, --verbose      Print debug information such as reception/
                           transmission of frames and name/value pairs.
        -n, --null-out     Discard downloaded data.
        -O, --remote-name  Save download data in the current directory.
                           The filename is dereived from URI. If URI
                           ends with '/', 'index.html' is used as a
                           filename. Not implemented yet.
        -2, --spdy2        Only use SPDY/2.
        -3, --spdy3        Only use SPDY/3.
        -t, --timeout=<N>  Timeout each request after <N> seconds.
        -w, --window-bits=<N>
                           Sets the initial window size to 2**<N>.
        -a, --get-assets   Download assets such as stylesheets, images
                           and script files linked from the downloaded
                           resource. Only links whose origins are the
                           same with the linking resource will be
                           downloaded.
        -s, --stat         Print statistics.
        --cert=<CERT>      Use the specified client certificate file.
                           The file must be in PEM format.
        --key=<KEY>        Use the client private key file. The file
                           must be in PEM format.
    $ src/spdycat -nv https://www.google.com/
    [  0.025] NPN select next protocol: the remote server offers:
              * spdy/3
              * spdy/2
              * http/1.1
              NPN selected the protocol: spdy/3
    [  0.035] recv SETTINGS frame <version=3, flags=0, length=20>
              (niv=2)
              [4(1):100]
              [7(0):12288]
    [  0.035] send SYN_STREAM frame <version=3, flags=1, length=106>
              (stream_id=1, assoc_stream_id=0, pri=3)
              :host: www.google.com
              :method: GET
              :path: /
              :scheme: https
              :version: HTTP/1.1
              accept: */*
              user-agent: spdylay/0.2.0
    [  0.077] recv SYN_REPLY frame <version=3, flags=0, length=558>
              (stream_id=1)
              :status: 302 Found
              :version: HTTP/1.1
              cache-control: private
              content-length: 222
              content-type: text/html; charset=UTF-8
              date: Sun, 13 May 2012 08:02:54 GMT
              location: https://www.google.co.jp/
              server: gws
              x-frame-options: SAMEORIGIN
              x-xss-protection: 1; mode=block
    [  0.077] recv DATA frame (stream_id=1, flags=1, length=222)
    [  0.077] send GOAWAY frame <version=3, flags=0, length=8>
              (last_good_stream_id=0)

Spdyd - SPDY server
+++++++++++++++++++

SPDY server is called ``spdyd`` and serves static files. It is single
threaded and multiplexes connections using non-blocking socket. The
static files are read using blocking I/O system call, ``read(2)``. It
speaks SPDY/2 and SPDY/3::

    $ src/spdyd --htdocs=/your/htdocs/ -v 3000 server.key server.crt
    IPv4: listen on port 3000
    IPv6: listen on port 3000
    The negotiated next protocol: spdy/3
    [id=1] [ 17.456] send SETTINGS frame <version=3, flags=0, length=12>
              (niv=1)
              [4(0):100]
    [id=1] [ 17.457] recv SYN_STREAM frame <version=3, flags=1, length=108>
              (stream_id=1, assoc_stream_id=0, pri=3)
              :host: localhost:3000
              :method: GET
              :path: /README
              :scheme: https
              :version: HTTP/1.1
              accept: */*
              user-agent: spdylay/0.2.0
    [id=1] [ 17.457] send SYN_REPLY frame <version=3, flags=0, length=113>
              (stream_id=1)
              :status: 200 OK
              :version: HTTP/1.1
              cache-control: max-age=3600
              content-length: 15
              date: Sun, 13 May 2012 08:06:12 GMT
              last-modified: Tue, 17 Jan 2012 15:39:01 GMT
              server: spdyd spdylay/0.2.0
    [id=1] [ 17.467] send DATA frame (stream_id=1, flags=0, length=15)
    [id=1] [ 17.467] send DATA frame (stream_id=1, flags=1, length=0)
    [id=1] [ 17.468] stream_id=1 closed
    [id=1] [ 17.468] recv GOAWAY frame <version=3, flags=0, length=8>
              (last_good_stream_id=0)
    [id=1] [ 17.468] closed

Currently, ``spdyd`` needs ``epoll`` or ``kqueue``.

Shrpx - A reverse proxy for SPDY/HTTPS
++++++++++++++++++++++++++++++++++++++

The ``shrpx`` is a multi-threaded reverse proxy for SPDY/HTTPS.  It
converts SPDY/HTTPS traffic to plain HTTP. It can be used as SSL/SPDY
proxy with the http proxy (e.g., Squid) in the backend. To enable
SSL/SPDY proxy mode, use ``--spdy-proxy`` option.  It also supports
configuration file. See ``--conf`` option and sample configuration
file ``shrpx.conf.sample``.

We briefly describe the architecture of ``shrpx`` here.  It has a
dedicated thread which listens on server sockets.  When it accepted
the incoming connection, it passes the file descriptor of the incoming
connection to one of the worker thread.  Each worker thread has its
own event loop and can handle many connections using non-blocking I/O.
The number of worker thread can be specified using the command-line
option. The `libevent <http://libevent.org/>`_ is used to handle
low-level network I/O.

Here is the command-line options::

    $ src/shrpx -h
    Usage: shrpx [-Dhs] [-b <HOST,PORT>] [-f <HOST,PORT>] [-n <CORES>]
                 [-c <NUM>] [-L <LEVEL>] [OPTIONS...]
                 <PRIVATE_KEY> <CERT>

    A reverse proxy for SPDY/HTTPS.


    OPTIONS:
        -b, --backend=<HOST,PORT>
                           Set backend host and port.
                           Default: '127.0.0.1,80'
        -f, --frontend=<HOST,PORT>
                           Set frontend host and port.
                           Default: '0.0.0.0,3000'
        -n, --workers=<CORES>
                           Set the number of worker threads.
                           Default: 1
        -c, --spdy-max-concurrent-streams=<NUM>
                           Set the maximum number of the concurrent
                           streams in one SPDY session.
                           Default: 100
        -L, --log-level=<LEVEL>
                           Set the severity level of log output.
                           INFO, WARNING, ERROR and FATAL.
                           Default: WARNING
        -D, --daemon       Run in a background. If -D is used, the
                           current working directory is changed to '/'.
        -s, --spdy-proxy   SSL/SPDY proxy mode.
        --add-x-forwarded-for
                           Append X-Forwarded-For header field to the
                           downstream request.
        --frontend-spdy-read-timeout=<SEC>
                           Specify read timeout for SPDY frontend
                           connection. Default: 180
        --frontend-read-timeout=<SEC>
                           Specify read timeout for non-SPDY frontend
                           connection. Default: 180
        --frontend-write-timeout=<SEC>
                           Specify write timeout for both SPDY and
                           non-SPDY frontends.
                           connection. Default: 60
        --backend-read-timeout=<SEC>
                           Specify read timeout for backend connection.
                           Default: 900
        --backend-write-timeout=<SEC>
                           Specify write timeout for backend
                           connection. Default: 60
        --backend-keep-alive-timeout=<SEC>
                           Specify keep-alive timeout for backend
                           connection. Default: 60
        --accesslog        Print simple accesslog to stderr.
        --frontend-spdy-window-bits=<N>
                           Sets the initial window size of SPDY
                           frontend connection to 2**<N>.
                           Default: 16
        --pid-file=<PATH>  Set path to save PID of this program.
        --user=<USER>      Run this program as USER. This option is
                           intended to be used to drop root privileges.
        --conf=<PATH>      Load configuration from PATH.
                           Default: /etc/shrpx/shrpx.conf
        --syslog           Send log messages to syslog.
        --syslog-facility=<FACILITY>
                           Set syslog facility.
                           Default: daemon
        --backlog=<NUM>    Set listen backlog size.
                           Default: 256
        --ciphers=<SUITE>  Set allowed cipher list. The format of the
                           string is described in OpenSSL ciphers(1).
        -h, --help         Print this help.


For those of you who are curious, ``shrpx`` is an abbreviation of
"Spdy/https to Http Reverse ProXy".

Without ``-s`` option, it works in the following configuration::

    Client <-- (SPDY, HTTPS) --> Shrpx <-- (HTTP) --> Web Server

With ``-s`` option, it works in the following configuration::

    Client <-- (SPDY, HTTPS) --> Shrpx <-- (HTTP) --> Proxy (e.g., Squid)

    * Client is configured to use Shrpx as SSL/SPDY proxy.

At the time of this writing, Chrome is the only browser which supports
SSL/SPDY proxy. The one way to configure Chrome to use SSL/SPDY proxy
is create proxy.pac script like this::

    function FindProxyForURL(url, host) {
        return "HTTPS SERVERADDR:PORT";
    }

``SERVERADDR`` and ``PORT`` is the hostname/address and port of the
machine shrpx is running.  Please note that Chrome requires valid
certificate for SSL/PROXY.

Then run chrome with the following arguments::

    $ google-chrome --proxy-pac-url=file:///path/to/proxy.pac --use-npn


Examples
--------

The *examples* directory contains a simple SPDY client implementation
in C.

Python-Spdylay - Python Wrapper
-------------------------------

The library comes with Python wrapper ``python-spdylay``. See
``python`` directory.