From 81d0ce9cf154ebf4ab025e27a7c13d2371478389 Mon Sep 17 00:00:00 2001 From: God Date: Wed, 25 Jan 2012 22:05:50 +0000 Subject: [PATCH] Create MediaWiki page '289 Protocol' --- 289-Protocol.mediawiki | 736 +++++++++++++++++++++++++++++++++++++++++ Categories.mediawiki | 2 +- Category-RS2.mediawiki | 3 +- 3 files changed, 739 insertions(+), 2 deletions(-) create mode 100644 289-Protocol.mediawiki diff --git a/289-Protocol.mediawiki b/289-Protocol.mediawiki new file mode 100644 index 0000000..55b481e --- /dev/null +++ b/289-Protocol.mediawiki @@ -0,0 +1,736 @@ +[[Category RS2]] + +NOTE: This page will have many further updates, once I rename and document the #289 client more. + + + +== '''Packet structure''' == +When the client sends a packet to the server, the first byte encapsulates its [http://en.wikipedia.org/wiki/Opcode opcode]. This specific opcode is encrypted with a value generated by the [http://en.wikipedia.org/wiki/ISAAC ISAAC] [http://en.wikipedia.org/wiki/Pseudorandom_number_generator PRNG] seeded with a dynamically server generated key during the login block. The server decrypts it and associates the opcode to the packet's respective predefined size. If the packet does not contain a fixed size, the opcode will be followed by either a byte or a word - varying per packet - for its proper size. This is then followed by the [http://en.wikipedia.org/wiki/Payload_(software) payload]. + +== '''Login Protocol Overview''' == +Every connection to the main 'gateway' server sends a single byte of data, mostly well known as the connection type. The connection type tells the main server which type of connection you wish to initiate. The old engine list consists of: +* Login request - connection type 14 +* Update - connection type 15 +* New connection login - connection type 16 +* Reconnecting login - connection type 18 + +The connection type we will cover in the following paragraphs is the login connection type, 14. After the login handshake initiating connection type, the client writes a small bit of data derived from the logging in player's username. This is believed to help select the appropriate login server. On successful handshake, the server sends back 8 ignored bytes. + +
long l = TextUtils.encodeAsBase37Integer(username);
+int i = (int) (l >> 16 & 31L);
+out.offset = 0;
+out.writeByte(14); // Initiate connection type
+out.writeByte(i); // "small bit of data derived from... player's username"
+in.queueBytes(2, out.payload);
+for (int j = 0; j < 8; j++) in.read();
+ +At this point, the client reads in one byte, called the status code. The status code 0 is expected to start the login protocol correctly. If the status code is 0, the client reads a long, dubbed by many as the server session key. This is used to help generate a unique seed for the client session's packet opcode masking. The client then stores two ints that are the upper and lower ints of the client session key, which has the same purpose as the server's key. The client then starts writing the login block, which is RSA encrypted. + +The login block starts with the byte 10, which is considered a magic number. Following it is the client session key and server session key longs. After the session keys, the session's UID (unique identifier or user identifier) is written to the block. This is used to distinguish between multiple sessions. Trailing behind the UID comes the client's username and password written as modified C-strings that are rather terminated with a 10 byte than a NUL byte. This block is then RSA encrypted and stored for later use. + +Now starts the login request packet. It starts off with a flag telling the server whether or not the client is reconnecting or connecting for the first time. The byte is 18 or 16, respectively. [NOW CLASSIFIED AS A CONNECTION TYPE] Following is the size of the rest of the login response packet, including the login block that trails at the end, to tip the server how much data it should expect. Later comes the magic number byte 255, and right behind it the client revision short. The packet is just about crafted completely. A flag byte that represents if the client is running in low memory or high memory modes is sent, and after the 9 CRC32 checksums of the file system 0 basic archives (this includes versionlist, media, config, etc.). To top it off, the RSA encrypted login block is appended to the end and the packet is sent to the server. + +The ISAAC ciphers are seeded for packet opcode masking after adding 50 to each int of the session keys, and the status code is reread. This finishes the login protocol. + +== '''Login Protocol Breakdown''' == +The login is comprised of four stages in which the client and server switch in regards to which one is reading and which one is writing. +
+===Variables:=== +The login process has a lot of variable data, compiled here is a list of the variables and their different values. +====Name Hash==== +A hash of the player name, thought to be used to select an appropriate login server. This has no use in current private servers. + +====Server Session Key==== +The server-session-key is one of two ciphers used to encrypt the game protocol, using the ISAAC algorithms. +
+===="Data File Version"==== + +The CRC checks for the cache files. +
+ +====User ID==== +The ID of the user. +
+====Username==== +The username of the player, used to identify their account. +
+====Password==== +The password of the player account, used so only they can log into their account. +
+====Client Session Key==== +The client-session-key is one of two ciphers used to encrypt the game protocol, using the ISAAC algorithms. +
+====Connect Status==== +The status of the connection. +{|border=2 +! Value +! Status +|- +| 16 +| Signifies that the connection is new. +|- +| 18 +| Signifies that the session is reconnecting a previously lost connection. +|- +|} + +====Size==== +The size of the unencrypted login packet, used to determine how many bytes need to be read from the stream by the server. +
+====Client Version==== +The memory-version of the game client. +{|border=2 +! Value +! Status +|- +| 0 +| Signifies the client is a low-memory client. +|- +| 1 +| Signifies that the client is a high-memory client. +|- +|} + +====CRC Values==== +9 4-byte values, Each containing the CRC of their respective cache files. Used by the server to verify client is up to date. +
+ +====Player Status==== +The in-game player status - player, player moderator, or administrator. +
+{|border=2 +! Value +! Status +|- +| 0 +| Signifies that this player is a normal player. +|- +| 1 +| Signifies that this player is a player moderator. +|- +| 2 +| Signifies that this player is an administrator. +|- +|} + +====Flagged==== +If set to 1, information about mouse movements etc. are sent to the server. Suspected bot accounts are flagged. +
+====Response Codes==== +At the beginning and end of the login procedure, we send different values to the client to allow or deny a login. The various values show different messages on the login box on the client or do something internally. +
+{| border=2 +! Value +! Response +|- +| -1 +| Waits for 2000ms and tries again while counting failures. +|- +| 0 +| Exchanges session keys, player name, password, etc. +|- +| 1 +| Waits for 2000ms and tries again. +|- +| 2 +| Client made a successful login. +|- +| 3 +| "Invalid username or password." +|- +| 4 +| "Your account has been disabled. Please check your message-center for details." +|- +| 5 +| "Your account is already logged in. Try again in 60 secs..." +|- +| 6 +| "RuneScape has been updated! Please reload this page." +|- +| 7 +| "This world is full. Please use a different world." +|- +| 8 +| "Unable to connect. Login server offline." +|- +| 9 +| "Login limit exceeded. Too many connections from your address." +|- +| 10 +| "Unable to connect. Bad session id." +|- +| 11 +| "Login server rejected session. Please try again." +|- +| 12 +| "You need a members account to login to this world. Please subscribe, or use a different world." +|- +| 13 +| "Could not complete login. Please try using a different world." +|- +| 14 +| "The server is being updated. Please wait 1 minute and try again." +|- +| 15 +| See the [[#Regarding response code 15|notes below]]. +|- +| 16 +| "Login attempts exceeded. Please wait 1 minute and try again." +|- +| 17 +| "You are standing in a members-only area. To play on this world move to a free area first." +|- +| 20 +| "Invalid loginserver requested. Please try using a different world." +|- +| 21 +| "You have only just left another world. Your profile will be transferred in: (number) seconds." +|- +| None of the above +| "Unexpected server response. Please try using a different world." +|- +|} + +==== Regarding response code 15 ==== +On the server, players are not unregistered for quite some time. This can be best witnessed when the client forcefully closes the connection while in combat. If you're quick enough before the player dies or kills the NPC, login attempts during that time return that the account is already logged in. This probably explains why the message says "try again in 60 seconds", and they just reused the response when the player is truly logged in. + +Going along with this "players aren't offline yet" idea, when the client experiences some lag and performs a reconnect, it sends byte 18 as it's [[#Connect Status|connection type]] to the server. + +The server most likely saves this as a boolean (reconnect = var == 18;). When the login is entirely validated, meaning the password's are okay and the server isn't full, it can either send back the normal response, 2, or 15. + +But why 15? If you look at the client code, you'll see that the chat messages aren't cleared. If you've ever had a poor connection you've noticed that your chat stays there upon a reconnect, and this is exactly why. + +When you implement response code 15 though, you do NOT need to send the "player status" or the "flagged" bytes. + +===Login Process:=== +====Stage 1: Client -> Server==== +{| border=2 +|- +! Data Type +! Value +|- +| ubyte +| 14 +|- +| ubyte +| "name hash" +|- +|} +
+ +====Stage 2: Server -> Client==== +{| border=2 +|- +! Data Type +! Value +|- +| byte +| 0 +|- +| byte +| 0 +|- +| byte +| 0 +|- +| byte +| 0 +|- +| byte +| 0 +|- +| byte +| 0 +|- +| byte +| 0 +|- +| byte +| 0 +|- +| byte +| "response code" +|- +| [[QWord|long]] +| "server session key" +|- +|} +
+ +====Stage 3: Client -> Server==== +{| border=2 +|- +! Data Type +! Value +|- +| byte +| "connect status" +|- +| byte +| "size" +|- +| byte +| 255 +|- +| [[Word|short]] +| 289 +|- +| byte +| "client version" +|- +| [[DWord|int]] +| "crc values"[0] +|- +| [[DWord|int]] +| "crc values"[1] +|- +| [[DWord|int]] +| "crc values"[2] +|- +| [[DWord|int]] +| "crc values"[3] +|- +| [[DWord|int]] +| "crc values"[4] +|- +| [[DWord|int]] +| "crc values"[5] +|- +| [[DWord|int]] +| "crc values"[6] +|- +| [[DWord|int]] +| "crc values"[7] +|- +| [[DWord|int]] +| "crc values"[8] +|- +| byte +| 10 or "RSA header" +|- +| [[QWord|long]] +| "client session key" +|- +| [[QWord|long]] +| "server session key" +|- +| [[DWord|int]] +| "user id" +|- +| [[RS String|RS String]] +| "username" +|- +| [[RS String|RS String]] +| "password" +|- +|} +
+ +====Stage 4: Server -> Client==== +{| border=2 +|- +! Data Type +! Value +|- +| byte +| "response code" +|- +| byte +| "player status" +|- +| byte +| "flagged" +|- +|} +
+ +== '''Player Updating''' == + +Yes, the player updating procedure IS different than 317. + +The player updating process consists of 4 parts: +* a) Our player movement updates +* b) Other player movement updates +* c) Player list updating +* c.a) Apperance updating +* c.b) Location updating +* d) Player update block flag-based updates + +'''Our player movement updates''' + +The client begins by reading 1 bit. This bit tells the client whether or not it is currently updating +'our player', or the player the client is controlling. If it's not updating our player, it exits and goes onto step b. +If it is, it then reads 2 bits. The value is called the movement update type. There are 4 recognized movement update types: + + +* Type 0 basically tells the client there is nothing to update for our player, just add its index to the local updating list. + +* Type 1 tells the client you moved in one direction. The client reads 3 bits, which represents the direction you moved in, and then 1 bit, which states whether further update is required. If so, it adds it to the updating list. This is used in walking. + +* Type 2 functions in much of the same way as its previous, only this time it reads two 3 bit values. The first represents the player's last direction, and the second it's current direction. Trailing behind it is also the 1 bit 'update required' flag as type 1. This is used in running. + +* Type 3 on the other hand is different. It reads in 2 bits which represents our player's plane, or its level of height, in the game world. Only 0-3 inclusive are appropriate planes supported by the client. It then reads two 7 bit quantities, representing the new relative X and relative Y coordinates of our player to our current map region's origin. It then sets our players position to the plane, x, and y positions as told to. Directly after it reads 1 bit, which describes whether or not to clear the awaiting-waypoint queue, basically to stop client from further queued stepping, such as used in teleporting. +Finally, it reads the 'update required' bit, and checks to see if further update is required. + +'''Other player movement updates''' + +The client begins by reading an 8 bit value telling the client how many players there are to update. It then enters a loop +for each player there is to update. + +Inside this loop, the client reads 1 bit. This is the movement update required flag. If the flag is 0, it sets the current updating player's last update cycle time to the current game logic loop cycle time, and adds the player to the local player list. If the flag is not 0, it then reads the movement update type, which is a 2 bit quantity. The following known types are: + + +* 0, the client updates the current player's last update cycle time, adds the current player to the local player list, and adds it to the updating list. + +* 1, the client updates the current player's last update cycle time and adds the current player to the local player list as well, but also reads in 3 bit quantity. This represents the current player's direction it walked to. It then reads the a 1 bit value that specifies whether or not to add the player to the updating list. + +* 2, the client does the exact same thing as the type 2 update, except it reads in two of the 3 bit quantities. The first represents the current player's last direction, and the second its current direction running. + +* 3, it only adds the player to the needing-update list, or so believed. Type 3 is not well known. + + +'''Player list updating''' + +The next step in the player updating procedure is the player list updating, or where the client recieves data on every player in its local list, such as appearance and location relative to ours. The client loops through a process for each player in the updating. + +The client reads an 11 bit quantity from the buffer, which is the next player in the updated list to be informed about. The client then checks if it has a cached buffer for that player's updating, and if it does, it updates the player appearance. + + + +'''Appearance updating''' + +Appearance updating starts off by first reading an unsigned byte that represents the current player's gender. Then it reads another unsigned byte that represents the player's over-head icon id. This is used with prayer icons above heads. Next, a loop occurs 12 times to read equipment data. + +In the loop, the client reads an unsigned byte that is the equipment slot's item id high byte. If it is 0, the player's equpment slot has no item. If it is not 0, another unsigned byte is read the merged with the previous to create the equipment's item id. If the id is 65535 (written as a -1 signed short), then the player's appearance is that of an NPC. The client reads in an unsigned short representing the NPC's id and sets the player's definition to that NPC's. + +After the equipment loop, it loops 5 times, once for each type of coloured body part. In each loop, the client reads an unsigned short and assigns it as the color of the current loop idx (which represents the body part). + + +Finally, after the color loop, the client reads 7 unsigned shorts representing animation indices; the animations belong to: +* Standing still +* Turning while standing +* Walking +* Turning around (backwards) +* Turning a quarter-way clockwise +* Turning a quarter-way counter clockwise +* Running + + + +After these animation indices are read, a long representing the player's name is read, an unsigned byte representing the combat level, and an unsigned short representing +the players skill level (for things where players arent ranked by levels, such as where it states ' (skill )' as an action menu text). + + + +'''Location updating''' + +After the appearance updating, the client starts to update that player's location relative to our player. The player is added to the local player list and it's last update cycle time. It then reads to 5 bit values that determine the players relative X and Y coordinates to our player. The local player area is 16x16, so if the delta of the two coordinates is > 15, 32 is subtracted from it to signify the player is on the other side of ours. It then reads a 1 bit quantity that defines whether or not the client has a chunk in the player update block list. If it does, it adds it to the updating list. At this point the client then sets the player's position. The next bit states whether or not to discard the awaiting-waypoint queue, such as when teleporting, ending the player list updating process. + + + +'''Update block flag-based updating''' + +The following is what most people think of when they say 'update mask' and 'update flag'. This process of the updating procedure is very important. It begins with looping through ALL players in the local player update list, reading an unsigned byte which from now on will be called the update flag. All further updates are seen to be 'included' by comparing a bitwise mask to this flag. If the flag has the bits for 0x40 all on, this signifies that the flag was too large for a simple unsigned byte and reads in another unsigned byte, which it uses as the upper unsigned byte, therefore the update flag is an unsigned little-endian short. The client then passes off the data to a helper method which processes all updates this flag signifies. + + + +Inside this method, many different bitwise masks are compared to the player's flag, and if the mask is set, logic is performed. These masks are frequently called update masks. A list of player update masks are below: + +* '''0x200''' The 0x200 mask is used to update the player so they appear to be asynchronously animating and walking. This mask is often used for the [http://runescape.wikia.com/wiki/Agility Agility] skill. The data associated goes in order of: byte (type C) which is the first location's X coordinate value, byte (type S) which is the first location's Y coordinate value, byte (type S) which is the second location's X coordinate value, byte (type C) the second location's Y coordinate value. After the locations are written, there is a required movement speed which is written as a short which marks how fast to move from position 1 to position 2. Another short (type A) is written as the movement speed going from position 2 to position 1. Finally one byte is written to end the mask block, which marks the direction. + + +* '''0x100''' The 0x100 mask is responsible for player graphics updating. The data associated is a little-endian unsigned short which represents the graphics id, and an int which is the graphics delay. + + +* '''0x2''' Animations are handled by the 0x2 mask. The payload for this update is a little-endian unsigned short that is the animation id, and an unsigned inversed byte which states the animation's delay. + + +* '''0x8''' The beloved 0x8 mask takes care of forced player text that is only displayed above the player's model. The only data associated with this is a jagex ASCII string with a terminator of 10. + + +* '''0x40''' Unlike the previous, the 0x40 mask handles normal player chat text. The client will read a little-endian unsigned short which holds chat text attributes. It holds the text color and chat effects. Next, the client reads an unsigned byte which states the player's priveleges (normal player, player moderator, moderator, staff) to give the chatter's name a crown. Right behind it trails an unsigned inversed byte that gives chat text length in bytes. Trailing afterwards is dictionary-compressed chat text. All chat text characters become indexes into a valid character table and are written as nibbles (4 bit quantities). + + +* '''0x4''' Updating the player's current interacting-entity is done via mask 0x4. The entity id is written as a little-endian unsigned short. + + +* '''0x1''' The 0x1 mask updates appearance of the player in exact same way as in updating player list. Only difference is that appearance is updated from a set-sized buffer filled from the current buffer. An unsigned inversed byte is read first which describes appearance buffer size, and the buffer is filled. + + +* '''0x20''' Facing coordinate updating is signified by the 0x20 mask. The player's facing-towards X and Y are set to read values; specifically, an unsigned lower-inverted short and little-endian unsigned short, respectively. + + +* '''0x10''' Notifying client's of a player's health is done via the 0x10 mask. The hitpoint damage done to the player is sent as an unsigned byte, followed by the hit type as a positive inverted byte. The player's current and max health are read as an unsigned inverted byte and unsigned byte, respectively. + + +* '''0x400''' The 0x400 mask acts in the same way as the 0x10 mask and is most likely associated with special attacks from weapons that have the ability to hit twice at the same time. Hitpoint damage is an unsigned byte, the hit type an unsigned inverted byte, and the current and maximum health being an unsigned byte and unsigned inverted byte, respectively. + + +After the client processes every single player in the update player list, it ends player updating. + +==Game Protocol== +The game protocol is the in-game communication of player actions between the server and client. +
+===Server -> Client Packets=== + +{| border=2 +|- +! Opcode +! Type +! Length (bytes) +! Name +! Description +|- +| 13 +| FIXED +| 3 +| [[289 Chat settings|Chat settings]] +| Sends the chat privacy settings. +|- +| 18 +| FIXED +| 6 +| [[289 Interface item|Interface item]] +| Displays an item model inside an interface. +|- +| 21 +| VARIABLE_BYTE +| N/A +| [[289 Send player option|Send player option]] +| Sends a player option (when a player is right clicked, i.e. "Follow"). +|- +| 23 +| FIXED +| 0 +| [[289 Clear screen|Clear screen]] +| Clears the screen of all open interfaces. +|- +| 30 +| FIXED +| 5 +| [[289 Send player head|Send player head]] +| Sends the players dialogue head on an interface. +|- +| 46 +| FIXED +| 2 +| [[289 Weight|Weight]] +| Sends the players weight. +|- +| 47 +| VARIABLE_SHORT +| N/A +| [[289 Send add ignore|Send add ignore]] +| Sends a ignored player to the ignore list. +|- +| 55 +| FIXED +| 4 +| [[289 Inventory overlay|Inventory overlay]] +| Displays an interface over the sidebar area. +|- +| 59 +| VARIABLE_SHORT +| N/A +| [[289 Set interface text|Set interface text]] +| Attaches text to an interface. +|- +| 63 +| FIXED +| 3 +| [[289 Send sidebar interface|Send sidebar interface]] +| Assigns an interface to one of the tabs in the game sidebar. +|- +| 76 +| FIXED +| 32 +| [[289 Send update item|Send update item]] +| Updates an item on an interface. +|- +| 79 +| FIXED +| 6 +| [[289 Interface offset|Interface offset]] +| Sets the offset for drawing of an interface. +|- +| 81 +| FIXED +| 2 +| [[289 Chat interface|Chat interface]] +| Shows an interface in the chat box. +|- +| 107 +| FIXED +| 2048 +| [[289 Send update items|Send update items]] +| Updates more than one item on an interface. +|- +| 119 +| FIXED +| 2 +| [[289 Show interface|Show interface]] +| Displays a normal interface. +|- +| 120 +| FIXED +| 3 +| [[289 Initialize player|Initialize player]] +| Sends their current index on the server's player list and the player's membership status. +|- +| 121 +| FIXED +| 0 +| [[289 Logout|Logout]] +| Disconnects the client from the server. +|- +| 133 +| FIXED +| 0 +| [[289 Reset camera|Reset camera]] +| Resets the camera position. +|- +| 155 +| FIXED +| 3 +| [[317 Send position|Send position]] +| Sends the coordinates of the player. +|- +| 160 +| FIXED +| 4 +| [[289 Interface color|Interface color]] +| Changes the color of an interface. +|- +| 168 +| FIXED +| 9 +| [[289 Send add friend|Send add friend]] +| Sends a friend to the friend list. +|- +| 172 +| FIXED +| 0 +| [[289 Reset button state|Reset button state]] +| Resets the button state for all buttons. +|- +| 177 +| FIXED +| 6 +| [[289 Send sound|Send sound]] +| Instructs the client to play a sound. +|- +| 181 +| FIXED +| 1 +| [[289 Flash sidebar|Flash sidebar]] +| Causes a sidebar icon to start flashing. +|- +| 184 +| FIXED +| 4 +| [[289 Scroll position|Scroll position]] +| Sets the scrollbar position of an interface. +|- +| 187 +| FIXED +| 3 +| [[289 Play song|Play song]] +| Instructs the client to play a song. +|- +| 188 +| N/A +| N/A +| [[289 Protocol#Player Updating|Player updating]] +| See player updating (above) for more information. +|- +| 195 +| FIXED +| 1 +| [[289 Run energy|Run energy]] +| Sends the players run energy level. +|- +| 196 +| VARIABLE_BYTE +| N/A +| [[289 Send message|Send message]] +| Sends a server message (e.g. 'Welcome to RuneScape') or trade/duel request. +|- +| 200 +| FIXED +| 4 +| [[289 Interface animation|Interface animation]] +| Sets an interface's model animation. +|- +| 201 +| FIXED +| 0 +| [[289 Animation reset|Animation reset]] +| Resets all animations in the immediate area. +|- +| 204 +| FIXED +| 2 +| [[289 System update|System update]] +| Sends how many seconds until a 'System Update.' +|- +| 208 +| FIXED +| 4 +| [[289 Camera shake|Camera shake]] +| Causes the camera to shake. +|- +| 219 +| FIXED +| 4 +| [[289 Load map region|Load map region]] +| Loads a new map region. +|- +| 221 +| FIXED +| 1 +| [[317 Friends list status|Friends list status]] +| Friends list load status. +|- +| 243 +| VARIABLE_BYTE +| N/A +| [[289 Send private message|Send private message]] +| Sends a private message to another player. +|- +| 244 +| FIXED +| 5 +| [[289 Send Npc Head|Send Npc Head]] +| Sends the dialogue head of an npc on an interface. +|- +| 247 +| FIXED +| 1 +| [[289 Minimap State|Minimap State]] +| Sets the mini map's state. +|- +| 253 +| FIXED +| 10 +| [[289 Open welcome screen|Open welcome screen]] +| Displays the welcome screen. +|- +|} + +===Client -> Server Packets=== + +{| border=2 +|- +! Opcode +! Type +! Length (bytes) +! Name +! Description +|- +| 235 +| FIXED +| 8 +| [[289 Add friend|Add friend]] +| Sent when a player adds a friend to their friend list. +|- +|} \ No newline at end of file diff --git a/Categories.mediawiki b/Categories.mediawiki index 11a2295..f70a0ba 100644 --- a/Categories.mediawiki +++ b/Categories.mediawiki @@ -6,5 +6,5 @@ The following categories contain pages or media. * [[Category Packet 317]] (80 members) * [[Category Packet 474]] (1 members) * [[Category Packet {{{revision}}}]] (1 members) -* [[Category RS2]] (5 members) +* [[Category RS2]] (6 members) * [[Category RSC]] (5 members) diff --git a/Category-RS2.mediawiki b/Category-RS2.mediawiki index dacbef6..6351abf 100644 --- a/Category-RS2.mediawiki +++ b/Category-RS2.mediawiki @@ -28,8 +28,9 @@ The ''opcode'' of a game packet is basically an identifier for the type of game A ''fixed-size'' packet is a packet whose payload size does never change, and the size for the specified opcode is already known between both client and server. A ''variable-sized'' packet is a packet whose payload size changes according to the situation of the game session. == '''Pages in category "RS2"''' == -The following 5 pages are in this category. +The following 6 pages are in this category. * [[194 Protocol]] +* [[289 Protocol]] * [[317 Protocol]] * [[464 Protocol]] * [[474 Protocol]]